In the relentless battle against airborne viruses, researchers from IMDEA Materials Institute, Rey Juan Carlos University (URJC) and the University of Valladolid (UVa), have developed a new spray coating to improve the antiviral efficacy of personal protective equipment, notably face masks.
In the relentless battle against airborne viruses, researchers from IMDEA Materials Institute, Rey Juan Carlos University (URJC) and the University of Valladolid (UVa), have developed a new spray coating to improve the antiviral efficacy of personal protective equipment, notably face masks. GO
In an exciting event that brings together scientists, researchers, and aspiring doctoral candidates, IMDEA Materials Institute opens its doors for its Open PhD Day. This day offers a unique opportunity for those interested in applied research and innovation. Exploring Opportunities Attendees
Jesús Ordoño Fernández, IMDEA MATERIALES The exploration of the red planet faces numerous challenges, from the effects of microgravity to space fungi and one of the most dangerous: radiation. The latter mainly comes from two sources: the Sun (and its solar storms) and outer space, distant
The PhD defence will take place in “Sala Verde de ETSICCP (Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos) de la UPM”.The dissertation is titled «Dimensional stability of Carbon Fibre Reinforced Polymers prepared by Infusion Processes».It has been advised by Prof. Carlos
Abstract: Epoxy resin adhesive mainly consists of two parts: epoxy resin and curing agent. The currently commonly used ones are epoxy thermosetting resins derived from fossil resources, which have a permanent cross-linked structure and can only be used once, cannot be further processed, and
Earlier this week, IMDEA Materials Institute celebrated our annual “4 Minute Thesis Talk” (4MT) (previously “3 Minute Thesis”). This event is designed to give our predoctoral researchers the opportunity to present their research projects to a general audience in just four minutes. Through this, the
Applications are currently open for 15 Doctoral Candidate/PhD positions in the BIOMENDMarie Skłodowska-Curie Doctoral Network. Three of these positions will be directly associated with IMDEA Materials Institute. For more information, please see the PDF below, or visit the BIOMEND website at
EQUIPMENT DESCRIPTION Zeiss Xradia 620 Versa laboratory tomograph with flat panel detector (3k × 2k pixels) and CCD camera (2k × 2k pixels) with the possibility of different objectives (0.4X, 4X, 20X, and 40X). The equipment features a focused X-ray tube with a tungsten emitter and voltage
Twinning, a phenomenon where crystals develop mirror symmetry across a twin plane during deformation, holds significant importance in the mechanical behaviour of materials. Recently, researchers from IMDEA Materials Institute, Prof. Javier LLorca, Dr. Valentín Vassilev-Galindo and Biaobiao Yang,
In the quest for greener energy solutions, hydrogen-based technologies have emerged as strong contenders. However, one of the challenges lies in efficient hydrogen storage as traditional austenitic steels, commonly used for hydrogen vessels, suffer from embrittlement during storage. With the aim
Abstract In this presentation, I will describe how data science, machine learning (ML) and high-throughput synthesis can be combined to achieve accelerated development and discovery of solid-state materials for energy applications. I will describe 6S, a self-sintered scalable solid-state
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Muhammad Mehdi, and I am from Pakistan. My academic
In the face of raw materials and energy crises, and environmental challenges, an ambitious project aims to address a crucial sustainability challenge in one of the key industries in the transition to a green economy. Co-coordinated by IMDEA Materials Institute and ArcelorMittal, IRIDESCENT is a
IMDEA Materials Institute, with its expertise in biodegradable metals for medical applications, aims to advance vanguard medical technologies through the BIOMEND Doctoral Network, a pioneering initiative supported by the European Comission’s Marie Skłodowska-Curie Actions (MSCA) programme. The
The PhD defense will be held at 11:30 am on March 15th in the "ESTI Caminos, Canales y Puertos de la UPM"Room: Department of Materials Science Classroom. Our best wishes to him!
Phys.org has highlighted the work of IMDEA Materials researchers in demonstrating for the first time the recyclability of high-performance carbon nanotube (CNT) sheets while maintaining their essential mechanical and electrical properties. You can find the full article at Phys.org, here:
Patent details Status Spanish patent filed Application number P202430190 Priority date 15 March 2024 Inventors De-Yi Wang, Jie Xu, Xiang Ao Applicant IMDEA Materials Institute, Universidad Politécnica de Madrid Transfer opportunity License of
Researchers from IMDEA Materials Institute have published groundbreaking work demonstrating, for the first time, the ability to recycle high-performance carbon nanotube (CNT) sheets while preserving their shape, structural alignment, mechanical and electrical properties, and intrinsic flexibility.
CompositesWorld has highlighted the work of IMDEA Materials in creating a world-first digital twin design for the real-time analysis of composite materials production processes. You can find the original article, here:
Abstract: Porous metals are increasingly important in technology. Due to their tunable me- chanical properties, they are promising candidates in various emerging applications such as metallic scaffolds for load-bearing bones, lightweight structures for trans- port technologies, electrodes for
Recently, BIOMET4D researcher William Solórzano-Requejo from the Universidad Politécnica de Madrid (UPM) took part in the Biodevices 2024 Conference in Rome, Italy as part of the 17th International Joint Conference on Biomedical Engineering Systems and Technologies. In his presentation, entitled
For the fourth consecutive year, IMDEA Materials Institute has participated in the Madrid Es Ciencia Fair, the largest annual science outreach event in the Community of Madrid. Nearly 20 researchers, representing all areas of research conducted by the Institute, from advances in medical devices
Abstract: The high standards and requirements demanded in high-speed machining (HSM) applications some examples are the precise manufacturing of microelectronics circuits or biomedical devices - comprise a delicate control of the tool preparation as well as coatings design and finish, which are
Project details Funding: Proyectos Líneas Estratégicas – Transmisiones 2023.Project coordinator (AEI): CATECProject coordinator (CDTI): EgileProject period: 01/01/2024 – 31/12/2027 IMDEA Materials' researchers Dr. Federico SketDr. Jon M.
Novel materials that better enable buildings to utilise solar energy for heating and to reflect sunlight, ultrafine iron and titanium-based alloys, and sophisticated modelling to improve the efficiency of gas turbines. These are just three of the potentially game-changing projects that will be
Researchers from IMDEA Materials Institute and the Technical University of Madrid (UPM) have developed an innovative Digital Twin that enables real-time analysis of composite materials manufacturing. The breakthrough was recently presented in The International Journal of Advanced Manufacturing
Project details Funding: Proyectos Líneas Estratégicas – Transmisiones 2023.Project coordinator (AEI): Fundación IMDEA MaterialesProject coordinator (CDTI): ArcelorMittal Innovación Investigación e Inversión, S.L.Project period: 01/01/2024 – 31/12/2027 IMDEA Materials' researchers Dr.
Abstract: The applications of Li-ion batteries (LIBs) vary widely from the transport sector (viz. electric vehicles, aircraft, robotics, drones, etc.) to battery energy storage technologies supporting and strengthening the power grid to mitigate the problem of intermittency of renewable energy
Abstract: Clear aligner treatment (CAT) is a new technique to treat malocclusions which ison current expansion along the globe and also gaining importance in oral medicine. Oral diseases are the third most expensive medical treatment in accumulatednumbers yearly in Europe, and the most spread
IMDEA Materials’ Scientific Director, Prof. Javier LLorca, has become the first Spanish researcher to receive the Morris Cohen Award from the Minerals, Metals & Materials Society (TMS). The recognition comes a year after Prof. LLorca was the first Spaniard to be awarded the TMS Structural
From the 7nd to the 9th of March, the Fair Madrid for Science and Innovation will be held at the Trade Fair Institution of Madrid (IFEMA) within the framework of the education week. IMDEA Materials participates actively in this important dissemination event for Madrid´s region with all the
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Mahdi Sabbaghian, and I am a Ph.D. in Materials
De-Yi Wang, IMDEA MATERIALS A massive fire has devastated a 14-story building in the Campanar neighbourhood of Valencia, causing a human tragedy for which there is no consolation. Once again, as happened in the Grenfell Tower fire in London, which left over seventy dead, we find ourselves
BIOMET4D researcher, Dr. Santiago Ochandiano from the Hospital General Universitario Gregorio Marañón (HGGM) was one of a number of speakers featured as part of the recent Translational Symposium on New Technologies in Maxillofacial Surgery held at H.G.U Gregorio Marañón in Madrid. Dr. Ochandiano’s
Mexico's El Economista is one of a number of outlets to have featured IMDEA Materials Institute Senior Researcher, Prof. Dr. De-Yi Wang in discussing the dangers posed by the use of flammable materials in construction following the deadly fire in Campanar de Valencia. You can read the original
Abstract A general theory of triboelectric nanogenerators (TENGs) is presented for an arbitrary geometric setup consisting of two electrodes, a fixed dielectric, and a moving dielectric [1]. The two dielectric materials have opposite charges. Optimization of power output is computed for a general
The PhD defence will take place in the José Echegaray room of the E.T.S de Ingenieros de Caminios (C/Profesor Aranguren 3), 28040 Madrid. The dissertation is titled "Effect of grain boundaries on the deformation and fracture of metallic polycrystals". It has been advised by Prof. Javier LLorca
CadenaSER is one of a number of media outlets to have highlighted a promising new study from IMDEA Materials Institute researchers which could significantly reduce risk of airborne bacterial infections caused by air filtration systems. You can see the original article (content in Spanish), here:
The PhD defence will take place in Aula -1.A.02- Library (Puerta de Toledo Campus) of the Carlos III University of Madrid (UC3M). How to get there: https://www.uc3m.es/about-uc3m/how-to-get-here/madrid-puerta-de-toledo The dissertation is titled "Medical Grade Bioabsorbable Composites for the
On February 6, 2024, the DELIGHTED consortium held its final meeting. The partners presented and discussed the latest results from the characterization of the developed steel grades within the framework of the DELIGHTED project. A manufactured prototype of a vineyard tractor cabin, ready for
IMDEA Materials has received a visit from the Mayor of Getafe, Mrs. Sara Hernandez Barroso, and a delegation from the Getafe City Council. As part of the visit, the institute also welcomed Mr. Roberto Fernández Melcón, Councilor for Employment, Training, and Maintenance, Mrs. Elisabeth Melo,
The Director of IMDEA Materials, Prof. José Manuel Torralba has talked to A Hombros de Gigantes about the fact that, despite all the advances in new materials, we are still immersed in the age of iron, or rather steel, the most used material. You can listen to the complete interview here (from
Project details Funding: MSCA Postdoctoral Fellowships 2022. HORIZON-MSCA-2022-PF-01Project coordinator: IMDEA Materials Project period: 01/02/2024 – 31/01/2026 IMDEA Materials' researchers Supervisor: Dr. Javier LlorcaFellow: Mahdi Sabbaghian Abstract One important health
Researchers involved in the DOMMINIO project are moving ever closer to achieving their goal of creating a new digital method for the improved manufacturing of next-generation multifunctional airframe parts. That’s according to DOMMINIO coordinator, Dr. Pablo Romero from AIMEN Technology
Patent details Status European patent filed Application number EP24382060.2 Priority date 24 January 2024 Inventors Juan José Vilatela García, Miguel Vázquez Pufleau Applicant IMDEA Materials Institute Transfer opportunity License of
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Felipe Lozano, I am from Santiago, Chile. I
IMDEA Materials Institute today welcomed a visit from FP students from IES Lope de Vega in Madrid. Such visits form a crucial part of IMDEA Materials' mission to spread interest and awareness in science and research among the younger generations. The students had the opportunity to tour
The 2nd International Seminar on Modelling, Simulation, and Machine Learning for the Rapid Development of Porous Materials aims to bring together young and senior scientists, comprising different scientific communities engaged in the fundamental understanding of porous materials. You can find out
A novel nanoparticle spray coating process has been shown to all-but eliminate the growth of some of the world’s most dangerous bacteria in air filtration systems, significantly reducing the risk of airborne bacterial and viral infections. That’s the principal finding of a recently published
The PhD defence will take place at UPM Caminos, Canales y Puertos. The dissertation is titled "Highly Sensitive Smart Sensor for Early Fire Warning Detection" It was supervised by Prof. De-Yi Wang, and the committee chair is Prof. Carlos González. Here is the link to the school address on
We are organising the 2nd International Seminar on Modelling, Simulation, and Machine Learning for the Rapid Development of Porous Materials. This is the follow-up meeting to the inaugurational one, which was organised at the German Space Agency in Cologne in May, 2023.We aim to bring together young
CadenaSER is one of a number of outlets to have highlighted IMDEA Materials Institute spin off Floatech's plans to to build an "advanced pilot plant" for the manufacture of 100% silicon anodes for lithium batteries. These anodes will be vital for the next generation of lithium batteries that
The Director of IMDEA Materials, Prof. José Manuel Torralba has talked to A Hombros de Gigantes about the fact that, despite all the advances in new materials, we are still immersed in the age of iron, or rather steel, the most used material. You can listen to the complete interview here (from
Dr. Jesús Ordoño, researcher at IMDEA Materials Institute, talked this weekend with Explora from Radio Televisión Canaria about new materials in biomedicine, and much more! Listen to the full interview here from minute 3.57 (interview audio in Spanish), here: https://rtvc.es/explora/
Patent details Status Spanish patent filed Application number P202331053 Priority date 19 December 2023 Inventors De-Yi Wang, Jie Xu, Xiang Ao, José Sánchez del Río, Tomás Sánchez Villaluenga, Alberto Brunete González, Applicant IMDEA Materials
The incredible work being done as part of the BIOMET4D project to create next-generation 4D biodegradable implants for tissue regeneration wouldn’t be possible without our team of amazing researchers. Get to know our team through our interview series. In this edition, we talk to Blanca Limones
Project details Funding: Research Fund for Coal and Steel (RFCS) - European CommissionProject coordinator: Teknologisk Institut (DTI)Project period: 01/01/2024 – 31/12/2026 IMDEA Materials' researchers Dr. Ilchat Sabirov Abstract To reduce Europe-wide CO2 emissions and to
Project details Funding: MSCA Doctoral Networks - European CommissionProject coordinator: National University of Ireland GalwayProject period: 01/01/2024 – 31/12/2026 IMDEA Materials' researchers Dr. Javier Llorca Abstract BIOMEND is an Industrial
Utility Model details Status Utility Model filed in Spain Application number U202332320 Priority date 29 December 2023 Inventors De-Yi Wang, Xiang Ao Applicant IMDEA Materials Institute Transfer opportunity License of
José Manuel Torralba, IMDEA MATERIALES; Alberto Meza, IMDEA and Damien Tourret, IMDEA Although the amounts of precious metals like gold in electronic waste are very small (on the order of 300 grams per ton), obtaining a kilogram of gold still only requires between three and four tons of
Abstract: The current hydrogen economy is in a phase marked by the low rate and efficiency of the hydrogenproduction from water and the energy generation by hydrogen oxidation into water. This first yearassessment explores the possibility of exploiting the change of electronical configuration due
Abstract The Interrelated aspects of thermo-mechanical behavior with a specific focus on microstructural characteristics and defects, such as partial and total dislocations densities and grain-boundaries (GBs) that span the nano to the micro, and how these characteristics affect failure modes,
The portal for Aeronautics and Space professionals, Actualidad Aeroespacial, has highlighted HipPEEK, the new research project of the IMDEA Materials Institute, led by Dr. Lucía Doyle. You can read the original article on the Actualidad Aeroespacial website by following the link below (original
Project details Funding: Public-Private Partnership 2022. Project coordinator: HP Printing and Computing Solutions S.L.U. Project period: 01/12/2023 – 30/11/2026 IMDEA Materials' researchers Dr. José Manuel Torralba Dr. Federico Sket Abstract Today's society demands clean manufacturing
In recent years, manufacturers have increasingly turned to lightweight plastic or fibre-reinforced plastic polymers to replace traditional metal components. This is particularly the case in the aerospace industry, where studies have shown that at least 30-40% of modern airframes are now
Floatech, the Madrid-based startup and spin-off of IMDEA Materials Institute, has secured investor backing to establish a pilot plant for the production of 100% silicon anodes intended for lithium-ion batteries (LIBs). The funding will enable Floatech to construct an advanced pilot plant in the
IMDEA Materials Institute researcher, Dr. Jesús Ordoño, has been interviewed on the nature of scientific experiments being carried out in space, marking the 25th anniversary of the International Space Station (ISS). The interview was recorded during the programme Longitud de Onda, on the Radio
Abstract: Abstract: The delicate alveolar structure of the mammalian lungs is stabilized against forces tending to its collapse, thanks to the coating of a complex lipid-protein network assembled by the pulmonary surfactant system. This material, assembled and secreted by type II pneumocytes,
Abstract: The equiatomic CoCrFeMnNi high entropy alloy (HEA) and its derivatives have attracted attention fromscientific community due to their mechanical properties, also at cryogenic conditions. Extensivemechanical twinning is mainly responsible for their outstanding mechanical response under
Last Friday, Dr. Jon Molina, Deputy Director of IMDEA Materials Institute, participated in a roundtable discussion on "Research and Innovation, an Essential Pair, a Global Challenge" as part of the Science and Innovation Week. The talk, which involved representatives from the 7 IMDEA Institutes,
Abstract: The on-going energy crisis demands extensive research into new alternatives for enhancing the energy efficiency in electric motors. As a probable solution to this, soft magnetic materials (SMM) portray excellent properties with high saturation magnetisation (JS) and low coercivity
Abstract: Modern technology demands the development of strong and flame-resistant multifunctional thermoplastic-based nanocomposites that are also compatible with three-dimensional (3D) printing, as this method has become a standard production process in essential industries. This study tackles
Jesús Ordoño Fernández, IMDEA MATERIALES It has been 25 years since the launch of the first module of the International Space Station (ISS) into space. Over the past two decades of research, applications developed in space have expanded to numerous fields, including energy, materials,
During Science Week 2023, IMDEA Materials Institute opened its doors for two visits from students in the Community of Madrid, one from Retamar School and another from the European University of Madrid. School visits play a fundamental role in the mission of IMDEA Materials, which aims to inspire
The website 3Printr.com has reported on the development of a new experimental technique for fragmentation testing to assess the energy absorption capacity against impact of metal structures manufactured through 3D printing. This research has been carried out by researchers from the Universidad
Scientists from the Universidad Carlos III de Madrid (UC3M) and IMDEA Materials Institute have developed a new experimental technique in fragmentation tests to evaluate the energy absorption capacity in the event of impact of metallic structures manufactured using 3D printing. This technique,
Ted Pendergast / Shutterstock De-Yi Wang, IMDEA MATERIALES Fires in nightclubs in Spain have caused at least 162 deaths in the past 45 years. In the latest incident, recorded in Murcia, 13 young people lost their lives. Another tragic night occurred in 1983 at the Alcalá 20 nightclub in
A new class of materials could prove significant in more efficient carbon capture technology, drug delivery and even as a gateway to the hydrogen economy. Metal Organic Frameworks, or MOFs, have been studied for more than three decades. Yet their industrial applicability is still being fully
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Juan Guillermo Santos Macías. I am from Spain. I
José Manuel Torralba, IMDEA MATERIALES We live in a world of steel. It's so common that we use it as a metaphor for everyday life. Some people have nerves of steel, and the biceps of many muscular young individuals are made of ship steel. What is not a metaphor is that steel is everywhere we
The DELIGHTED consortium members played a significant role in organizing the International Workshop “High Strength Steels – HSS 23” under the umbrella of Associazione Italiana di Metallurgia, which was chaired by Ettore Anelli. DELIGHTED consortium members, including Silvia Barella, Carlo
For the second year running, 10 IMDEA Materials Institute researchers have been included in Stanford University's annual lists of the world's top scientists. The result reinforces the Institute's reputation as a centre for excellence, with the Stanford ranking based on the records of more than 8
Abstract Modeling the damage and fracture of materials has been a recurrent topic in solid mechanics and materials engineering in the last century. In the present there is a strong interest to extend these studies to model complex multiphysical problems including explicitly the effect of the
The incredible work being done as part of the BIOMET4D project to create next-generation 4D biodegradable implants for tissue regeneration wouldn’t be possible without our team of amazing researchers. Get to know our team through our interview series. In this edition, we talk to Dr. Muzi from
DELIGHTED researchers successfully conducted in situ synchrotron X-ray diffraction studies on a steel grade developed within the project framework at the P21.2 beamline of PETRA III at DESY (Hamburg, Germany) earlier this month (October 2 to 4), 2023. The team included the leading expert in in
On October 6, BIOMET4D held the first meeting of its Stakeholder Advisory Board (SAB) in which board members were updated on the project's current status and its progress over the past year. All of the SAB members were present for the meeting, including Ana María Zambrano López from APERTCRAS,
• IMDEA Materials Institute has organised the largest edition to date of the Symposium on Alloys for Additive Manufacturing (AAMS), one of the most prestigious conferences in its field in Europe. • Experts in metal 3D printing from countries such as the United States, Japan and Australia joined
Abstract: Animals such as geckos can climb vertical walls or even move about upside down on ceilings. Such locomotion requires strong and ubiquitous adhesion between their feet and various surfaces, yet easy detachment when needed. However, current smart adhesives made of elastomers suffer from
Position: Laboratory Coordinator Ph.D. Materials Science and Engineering: Carlos III University of Madrid. MEng: Universidad de Valencia. Spain Address: IMDEA Materials, C/ Eric Kandel, 2, Tecnogetafe, 28906 Getafe, Madrid - Spain E-mail: vanesa.martinez@imdea.org
Abstract: The active materials used in current LIBs fall short in energetic terms due to their limited uptake of Li, so further development of these materials is needed. In contrast to the insertion materials usually used in the LIBs, alloy materials are not restricted by the sites in the host
Resumen: Nanocomposite materials based on a polymer matrix and nanomaterials (as Graphene Nanoplateletes, 2D clays or Metal Organic Frameworks) acting as additives are an exciting type of materials that bring the opportunity to create plastics with better properties (mechanical, thermal,
The PhD defence will take place in the “Salon de Grados” of the Montegancedo Campus (Boadilla) where the Facultad de Informática is based (ETSI). The dissertation is entitled «Advanced deep Learning technologies for the smart manufacturing of structural composites». It was advised
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Monsur Islam, and I am from India. I received my PhD
Abstract: Honeycomb has fascinated humans for millennia. It is a naturally engineered structure that serves as storage for the bees, a place for the queen to lay eggs, rear their brood, among a multitude of additional functions. Even though honeycomb construction has been studied, results have
Abstract Titanium alloys are widely employed in aerospace applications owing to superior properties such as a high specific strength and a good corrosion resistance. In particular, the variety of dual phase microstructures obtained through different thermo-mechanical processing routes enables
Project details Funding: European Office of Aerospace Research and DevelopmentProject coordinator: IMDEA MaterialsProject period: 30/09/2023 – 29/09/2026 IMDEA Materials' researchers Dr. Juan José Vilatela and Dr. Johan Christensen Abstract Intercalation compounds are inorganic
Enhanced material quality, the reduction of carbon emissions and waste generation, and reduced risks to the supply of critical raw materials. These are the three principal objectives of a new international research initiative involving 10 partners from four European countries in which IMDEA
CadenaSER has highlighted the awarding of a National Prize in Engineering and Architecture to IMDEA Materials' Scientific Director, Prof. Javier LLorca on behalf of the Spanish Ministry for Science and Innovation. You can read the original article, here:
Abstract Functional and structural parts, made so far with metals, have been progressively reengineeredby replacing metallic materials by discontinuous fibre reinforced polymers and continuous fibrereinforced composites. Polymer composites are usually divided into two groups, advanced (orhigh
The possibility of seeing what no one has seen before in what everyone has already looked at. That is a large part of what drives Prof. Javier LLorca to continue his pioneering work after nearly four decades among the best in Spanish science and research. Scientific Director of IMDEA Materials
Abstract: Floating Catalyst Chemical Vapor Deposition (FCCVD) is a method for the synthesis of 1D nanoparticles, i.e., nanotubes and nanowires, in the aerosol phase. Specifically, 1-D nanoparticles grow on the surface of spherical catalyst nanoparticles while floating through a gas reactor. An
Tomorrow, September 24th, World Cancer Research Day is celebrated. To commemorate this important day, IMDEA Materials Institute speaks with Dr. Mónica Echeverry, principal investigator of the DITTCe project. This project, led by the Technical University of Madrid (UPM), aims to develop an
José Manuel Torralba, IMDEA MATERIALS y Miguel Ángel Rodiel, IMDEA Replacing fossil fuels brings with it challenges and side effects that must be considered by all parties involved in Europe's energy transition, vital to our future. To begin with, however, we must ask one seemingly obvious, but
The DELIGHTED consortium continues to disseminate the project results. Andrea Gómez Fernandez from IMDEA Materiales gave a talk about the effect of aging on microstructure and mechanical properties of Fe-30Mn-9Al-1C steel on macro- and microscales at EUROMAT 2023 Congress in Frankfurt am Main,
Abstract:Powder Bed Fusion – Laser Beam (PBF-LB) paved the way for developing the next-generation alloys achieving unique properties that could not be guaranteed with the traditional manufacturing routes. The conventional metal alloys utilised for cast and wrought processes did not take full
A number of media outlets, including trade publication Acermetal, have highlighted IMDEA Materials' role in the European AID4GREENEST project. You can read the original publication at acermetal.es at the link below.
IMDEA Materials Institute postdoctoral researcher, Dr. María de Nicolás Morillas, will be one of seven IMDEA investigadors participating in this year's European Researchers' Night Madrid. Dr. de Nicolás is currently researching high entropy alloys (HEAs) for hydrogren storage as well as advanced
Abstract: Reconstructing the morphology of aerogels presents significant challenges if 3D visualizations of their mesoporous nanostructure are desired. Available microscopic and tomographic tools find it difficult to probe into all types of aerogels for the purposes of reconstructing their 3D
Abstract: We all are very familiar with graphene and carbon nanotubes and their extraordinary electronic and mechanical properties. Both materials are composed of sp2 carbon atoms; their structures look very similar locally but exhibit different properties due to the way their atoms are arranged
Abstract: Systems with broken continuous symmetry in ideal lattices cannot be rectified through rearrangement or deformation. Topological metamaterials featuring nontrivial, artificially induced phase transitions have emerged as pivotal constituents for engineering these topological defects,
The PhD Defense will take place at 10:30 am, in the Aula de Grados (Padre Soler), of the University Carlos III of Madrid in Leganes. The dissertation is entitled “Development of Ti-Fe-based powders for laser additive manufacturing of ultrafine lamellar eutectics”. It was advised by Dr. Federico
The PhD Defense will take place at 11:30 am, in the Concepción Arenal Building, room 14.0.11, Universidad Carlos III de Madrid - Getafe Campus.The defense will have a public part and a confidential part. The dissertation is entitled “Binder Jetting: A Microstructural Perspective”. It was
Position: Research Associate PhD: Complutense University of Madrid, Spain Research: Multifunctional Nanocomposites Address: IMDEA Materials, C/ Eric Kandel, 2, Tecnogetafe, 28906 Getafe Madrid - Spain E-mail: juanpedro.fernandez@imdea.org Phone: +34 674 178 904 Fax: +34 91 550 30 04 Short
Position: Research Associate PhD: Dublin City University, Ireland Research: Micro- and Nano-Mechanics Address: IMDEA Materials, C/ Eric Kandel, 2, Tecnogetafe, 28906 Getafe, Madrid - Spain E-mail: miguel.monclus@imdea.org Phone: +34 91 549 34 22 Fax: +34 91 550 30 47 Short Bio Miguel
The PhD defence will take place at noon, in the “sala Verde” 3.S01.08 of the E. T. S. de Ingenieros de Caminos, Ciudad Universitaria, Madrid. The dissertation is entitled « Development and Experimental Correlation of Machine Learning Models for Diagnosis of Processing Disturbances in Liquid
Project details Funding: U.S. Army Contracting CommandProject coordinator: IMDEA MaterialsProject period: 08/09/2023 – 7/09/2026 IMDEA Materials' researchers Dr. Srdjan Milenkovic Abstract Metal industry is one of the largest sectors worldwide. In order to maintain its
On Friday, September 29, in the auditorium of the Madrid Student Residence, researchers from the IMDEA Institutes will tell us what lines of research and what specific projects are being developed in their centers, directly linked to one of the five missions of the EU, whose common goal is to
Location
C/ Eric Kandel, 2
Tecnogetafe
28906, Getafe, Madrid (Spain)
