2025

• P. MacArdghail, R. A. Barrett, N. Harrison, I. Sabirov, J. LLorca, S. B. Leen - Combined Gleeble physical welding simulation and low-cycle thermo-mechanical fatigue for heat-affected zone material for 9Cr steel: Experimental testing and through-process model. Journal of Materials: Design and Applications, 239, 180-204, 2025.
• C. Pereira-Lobato, M. Echeverry-Rendón, J. P. Fernández-Blázquez, J. LLorca, C. González - Self-reinforced PLA/PCL composites manufactured from commingled yarns for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 163, 106819, 2025.
• I. Escobar-Moreno, E. Nieto-Valeiras, J. LLorca - Slip transfer and crack initiation at grain and twin boundaries during strain-controlled fatigue of solution-hardened Ni-based alloys. Acta Materialia, 283, 120497, 2025.

2024

• W. Ali, J. Ordoño, A. Kopp, C. González, M. Echeverry-Rendón, J. LLorca - Cytocompatibility, cell-material interaction, and osteogenic differentiation of MC3T3-E1 pre-osteoblasts in contact with engineered Mg/PLA composites. Journal of Biomedical Materials Research part A, 112, 2136-2148, 2024.
• Y.-Y. Liu, C. Intini, M. Dobricic, F. J. O'Brien, J. LLorca, M. Echeverry-Rendon - Biomimetic collagen-based 3D-printed poly (glycerol sebacate) composite scaffold resembling mechanical properties of native cartilage for enhanced tissue defect repair. International Journal of Biological Macromolecules , 280, 135827, 2024.
• C. Thompson, C. González, J. LLorca - Material extrusion fabrication of continuous metal wire-reinforced polymer–matrix composites. Composites Communications, 50, 102024, 2024.
• B. Yang, J. Wang, M. R. Ghandehari Ferdowsi, Q. Chao, X. Gao, Y. Li, Y. Zhu, M. Barnett, J. LLorca - Effect of precipitates on the dominant active slip systems in Mg-4.5Zn (wt.%) alloy. Acta Materialia, 278, 120231, 2024.
• Z. Liu, T. Chen, R. Shu, J. Wang, G. Sha, J. LLorca - Hot-isostatic pressed Al melt-spun ribbons with tailored microstructure and mechanical properties for metallic mirrors. Metallurgical and Materials Transactions A, 55, 3147-3154, 2024.
• C. Martínez-Alonso, J. LLorca - On the applicability of the d-band model to predict the influence of elastic strains on the adsorption energy of different adsorbates onto Pt and PtO2 surfaces. ACS Omega, 9, 29884-29895, 2024.
• C. Martínez-Alonso, V. Vassilev-Galindo, B. M. Comer, F. Abild-Pedersen, K. T. Winther, J. LLorca - Application of machine learning to discover new intermetallic catalysts for the hydrogen evolution and the oxygen reduction reactions. Catalysis Science and Technology, 14, 3784-3799, 2024.
• W. Shao, H. Hou, S. Liu, J. LLorca - First-principles prediction of the Co-Al phase diagram including configurational, vibrational and magnetic contributions. Journal of Materials Research and Technology, 31, 1518-1534, 2024.
• W. Ali, C. González, A. Kopp, J. LLorca. - Bioabsorbable Composite Laminates of Poly-Lactic Acid Reinforced with Surface-Modified Mg Wires for Orthopedic Implant Applications. Advanced Engineering Materials , 26, 2400617, 2024.
• B. Yang, J. LLorca - Origin of nucleation and growth of extension twins in grains unsuitably oriented for twinning during deformation of Mg-1%Al. Journal of Magnesium and Alloys, 12, 1186-1203, 2024.
• A. Jamali, A. Ma, J. LLorca - Prediction of the fatigue life in a textured AZ31 Mg alloy as a function of orientation using fatigue indicator parameters. Materials Science and Engineering A, 899, 146447, 2024.
• C. Thompson, G. Domínguez, P. Bardisa, Y. Liu, J. P. Fernández-Blázquez, J. Sánchez del Río, M. Echeverry-Rendón, C. González, J. LLorca - Medical grade 3D printable bioabsorbable PLDL/Mg and PLDL/Zn composites for biomedical applications. Journal of Biomedical Materials Research Part A, 112, 798-811, 2024.
• R. Santos-Güemes, J. LLorca - Dislocation dynamics analysis of the strengthening induced by shearable and non-shearable precipitates in the presence of dislocation pile-ups. European Journal of Mechanics A / Solids, 104, 105042, 2024.
• E. Nieto-Valeiras, A. Orozco-Caballero, M. Sarebanzadeh, J. Sun, J. LLorca - Analysis of slip transfer across grain boundaries in Ti via diffraction contrast tomography and high-resolution digital image correlation: when the geometrical criteria are not sufficient. International Journal of Plasticity, 175, 103941, 2024.
• A. K. Boukellal, M. Sarebanzadeh, A. Orozco-Caballero, F. Sket, J. LLorca, D. Tourret - Grain growth competition and formation of grain boundaries during solidification of hcp alloys. Acta Materialia, 269, 119830, 2024.
• C. Thompson, C. González, J. LLorca - Additively-manufactured Mg wire-reinforced PLDL-matrix composites for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 153, 106496, 2024.
• S. Liu, H. Y. Hou, W. Shao, J. Yang, Z. Wang, Q. X. Yang, J. LLorca - Revisiting the precipitation mechanisms of Guinier-Preston zones, η′, and η precipitates in Al-Zn-Mg alloys. Acta Materialia, 268, 119789, 2024.
• B. Yang, V. Vassilev-Galindo, J. LLorca - Application of machine learning to assess the influence of microstructure on twin nucleation in Mg alloys. npj Computational Materials, 10, 26, 2024.
• R. Muñoz, R. Seltzer, V. Martínez, C. González, J. LLorca - A material selection approach for protecting carbon/epoxy laminates against single and repeated low-velocity impacts. International Journal of Impact Engineering, 186, 104893, 2024.
• C. Pereira Lobato Costa, M. Echeverry-Rendón, J. P. Fernández-Blázquez, C. González, J. LLorca - Mechanical properties, in vitro degradation and cytocompatibility of woven textiles manufactured from PLA/PCL commingled yarns. Journal of the Mechanical Behavior of Biomedical Materials, 150, 106340, 2024.
• B. Ribeiro, A. Vázquez-López, M. Vázquez-Pufleau, M. Llamosí, J. Semprere, J. Yuste, M. Domenech, D.-Y. Wang, J. J. Vilatela, J. LLorca and M. Echeverry-Rendón - Control of microbial agents by functionalization of commercial air filters with metal oxide particles. Materials Chemistry and Physics, 313, 128684, 2024.
• E. Nieto-Valeiras, E. Ganju, N. Chawla, J. LLorca - Assessment of slip transfer criteria for prismatic-to-prismatic slip in Ti from 3D grain boundary data. Acta Materialia, 262, 119424, 2024.

2023

• Y. Liu, J. P. Fernández-Blázquez, G. Yin, D.-Y. Wang, J. LLorca, M. Echeverry-Rendón - A strategy to tailor the mechanical and degradation properties of PCL-PEG-PCL based copolymers for biomedical application. European Polymer Journal, 198, 112388, 2023.
• W. Ali, M. Echeverry-Rendón, A. Kopp, C. González, J. LLorca - Effect of surface modification on interfacial behavior in bioabsorbable magnesium wire reinforced poly-lactic acid polymer composites. npj Materials Degradation, 7, 65, 2023.
• B. Yang, J. Wang, Y. Li, M. Barnett, J. LLorca - Suppressed transformation of compression twins to double twins in Mg by activation of non-basal slip. Scripta Materialia, 235, 115620, 2023.
• S. Kovacevic, W. Ali, E. Martínez-Pañeda, J. LLorca - Phase-field modeling of pitting and mechanically-assisted corrosion of Mg alloys for biomedical applications. Acta Biomaterialia, 16, 641–658, 2023.
• W. Shao, J. M. Guevara-Vela, A. Fernández-Caballero, S. Liu, J. LLorca - Accurate prediction of the solid-state region of the Ni-Al phase diagram including configurational and vibrational entropy and magnetic effects. Acta Materialia, 253, 118962, 2023.
• M. Zhang, A. Ma, J. LLorca - Simulation of dislocation slip and twin propagation in Mg through coupling crystal plasticity-phase field models. Mechanics of Materials, 180, 104608, 2023.
• E. Ganju, E. Nieto-Valeiras, J. LLorca, N. Chawla - A novel diffraction contrast tomography (DCT) acquisition strategy for capturing the 3D crystallographic structure of pure titanium. Tomography of Materials and Structures, 1, 100003, 2023.
• B. Yang, J. Wang, Y. Li, M. Barnett, J. LLorca - Deformation mechanisms of dual-textured Mg-6.5Zn alloy with limited tension-compression yield asymmetry. Acta Materialia, 248, 118766, 2023.
• W. Ali, M. Echeverry-Rendón, G. Domínguez, K. van Gaalen, A. Kopp, C. González, J. LLorca - Bioabsorbable WE43 Mg alloy wires modified by continuous plasma electrolytic oxidation for implant applications. Part II: degradation and biological performance. Biomaterials Advances, 147, 213325, 2023.
• W. Ali, M. Li, L. Tillman, T. Mayer, C. González, J. LLorca, A. Kopp - Bioabsorbable WE43 Mg alloy wires modified by continuous plasma electrolytic oxidation for implant applications. Part I: Processing, microstructure and mechanical properties. Biomaterials Advances, 146, 213314, 2023.
• M. Yu, Y. Cui, Y. Chen, Z. Ding, J. Wang, J. LLorca, X. Zeng - Critical resolved shear stresses for slip and twinning in Mg-Y-Ca alloys and their effect on the ductility. International Journal of Plasticity, 162, 103525, 2023.
• C. Madrona, S. Hong, D. Lee, J. García-Pérez, J. M. Guevara-Vela, R. Bernardo-Gavito, A. Mikhalchan, J. LLorca, B.-C. Ku, D. Granados, J. Y. Hwang, J. J. Vilatela - A continuous intercalation compound of bundled Br wires and CNTs for high-performance conductors. Carbon , 204, 211-218, 2023.
• M. Sarebanzadeh, A. Orozco-Caballero, J. LLorca - Accurate determination of active slip systems for improved geometrical criteria of basal-to-basal slip transfer at grain boundaries in pure Mg. Acta Materialia, 243, 118536, 2023.
• J. Cui, L. Ma, G. Chen, N. Jiang, Y. Yang, S. Wang, K. Nishimura, J. LLorca - Effect of twin boundaries on the strength of body-centered cubic tungsten nanowires. Materials Science and Engineering, A 862, 143826, 2023.
• W. Shao, S. Liu, J. LLorca - First principles prediction of the Al-Li phase diagram including configurational and vibrational entropic contributions. Computational Materials Science, 217, 111898, 2023.

2022

• A. Jamali, A. Ma, J. LLorca - Quantitative assessment of the microstructural factors controlling the fatigue crack initiation mechanisms in AZ31 Mg alloy. Acta Materialia, 239, 118263, 2022.
• S. Liu. J. S. Wróble, J. LLorca - First principles investigation of the Al-rich corner of Al-Li-Cu phase diagram. Acta Materialia, 236, 118129, 2022.
• C. Pascual-González, J. de la Vega, C. Thompson, J. P. Fernández-Blázquez, D. Herráez-Molinero, N. Biurrun, I. Lizarralde, J. Sánchez del Río, C. González, J. LLorca - Processing and mechanical properties of novel biodegradable poly-lactic acid/Zn 3D printed scaffolds for application in tissue regeneration. Journal of the Mechanical Behavior of Biomedical Materials, 132, 105290, 2022.
• C. Pascual-González, C. Thompson, J. de la Vega, N. Biurrun, J. P. Fernández-Blázquez, I. Lizarralde, D. Herráez, C. González, J. LLorca - Processing and properties of PLA/Mg filaments for 3D printing of scaffolds for biomedical applications. Rapid Prototyping Journal, 28, 884-894, 2022.
• R. Muñoz, R. Seltzer, F. Sket, C. González, J. LLorca - Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation. International Journal of Impact Engineering, 165, 104229, 2022.
• B. Yang, C. Shi, R. Lai, D. Shi, D. Guan, G. Zhu, Y. Cui, G. Xie, Y. Li, A. Chiba, J. LLorca. - Identification of active slip systems in polycrystals by Slip Trace – Modified Lattice Rotation Analysis (ST-MLRA).. Scripta Materialia, 214, 114648, 2022.
• C. Martínez-Alonso, J. M. Guevara-Vela, J. LLorca. - Understanding the effect of mechanical strains on the catalytic activity of transition metals. Physical Chemistry Chemical Physics, 24, 4832–4842, 2022.
• R. Santos-Güemes, J. Segurado, J. LLorca - A generalized line tension model for precipitate strengthening in metallic alloys. European Journal of Mechanics A / Solids, 93, 104540, 2022.
• M. Marvi-Mashhadi, W. Ali, M. Li, C. González, J. LLorca. - Simulation of corrosion and mechanical degradation of additively manufactured Mg scaffolds in simulated body fluid.. Journal of the Mechanical Behavior of Biomedical Materials, 126, 104881, 2022.
• C. Galera-Rueda, X. Jin, J. LLorca, M. T. Pérez-Prado. - Icosahedral quasicrystal enhanced nucleation in commercially pure Ni processed by selective laser melting.. Scripta Materialia, 211, 114512, 2022.
• E. Nieto-Valeiras, J. LLorca - Criteria for slip transfer across grain and twin boundaries in pure Ni. Materialia, 21, 101303, 2022.
• D. Tourret, H. Liu, J. LLorca, - Phase-field modelling of microstructure evolution: Recent applications, perspectives and challenges. Progress in Materials Science, 123, 100810, 2022.
• E. Nieto-Valeiras, S. Haouala, J. LLorca. - On the effect of slip transfer at grain boundaries on the strength of FCC polycrystals. European Journal of Mechanics/A Solids, 91, 104427, 2022.
• A. Jamali, A. Ma, J. LLorca - Deformation and crack initiation mechanisms of textured AZ31 Mg alloy subjected to low cycle fatigue. Scripta Materialia, 207, 114304, 2022.

2021

• C. Martínez-Alonso, J. M. Guevara-Vela, J. LLorca - The effect of elastic strains on the adsorption energy of H, O and OH in transition metals. Physical Chemistry Chemical Physics, 23, 21295-21306, 2021.
• S. Liu, G. Esteban-Manzanares, J. LLorca - First principles prediction of the Al-Li phase diagram. Metallurgical and Materials Transactions A, 52, 4675-4690, 2021.
• W. Ali, M. Echeverry-Rendón, A. Kopp, C. González, J. LLorca - Strength, corrosion resistance and cellular response of interfaces in bioresorbable poly-lactic acid/Mg fiber composites for orthopedic applications. Journal of the Mechanical Behavior of Biomedical Materials, 123, 104781, 2021.
• J. Wang, Y. Chen, Z. Chen, J. LLorca, X. Zeng - Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests. Acta Materialia, 217, 117151, 2021.
• C. Galera-Rueda, M. Montero-Sistiaga, K. Vanmeensel, M. Godino-Martínez, J. LLorca, M. T. Pérez-Prado - Icosahedral quasicrystal-enhanced nucleation in Al alloys manufactured by selective laser melting. Additive Manufacturing, 44, 102053, 2021.
• I. López-Cabañas, J. LLorca, R. González-Arrabal, I. E. Meletis, J. M. Molina-Aldareguía - High throughput optimization of hard and tough TiN/Ni nanocomposite coatings by reactive magnetron sputter deposition. Surface and Coatings Technology, 418, 127226, 2021.
• C. Galera-Rueda, E. Nieto-Valeiras, M. Gardon, M. T. Pérez-Prado, J. LLorca - Effect of ZrH2 particles on the microstructure and mechanical properties of IN718 manufactured by selective laser melting. Materials Science and Engineering A, 813, 141123, 2021.
• M. Zhang, H. Zhang, A. Ma, J. LLorca - Experimental and numerical analysis of cyclic deformation and fatigue behavior of a Mg-RE alloy. International Journal of Plasticity, 139, 102885, 2021.
• R. Santos-Güemes, L. Capolungo, J. Segurado, J. LLorca. - Dislocation dynamics prediction of the strength of Al-Cu alloys containing shearable theta” precipitates.. Journal of the Mechanics and Physics of Solids, 151, 104375, 2021.
• B. Bellón, A. K. Boukellal, T. Isensee, O. M. Wellborn, K. P. Trumble, M. J. M. Krane, M. S. Titus, D. Tourret, J. LLorca. - Multiscale prediction of microstructure length scales in metallic alloy casting.. Acta Materialia, 207, 116686, 2021.
• R. Alizadeh, J.-Y. Wang, J. LLorca - Precipitate strengthening of pyramidal slip in Mg-Zn alloys. Materials Science and Engineering A, 804, 140697, 2021.
• M. Li, F. Benn, T. Derra, N. Kroeger, M. Zinser, R. Smeets, J. M. Molina-Aldareguía, A. Kopp, J. LLorca. - Microstructure, mechanical properties, corrosion resistance and cytocompatibility of WE43 Mg alloy scaffolds fabricated by laser powder bed fusion for biomedical applications.. Materials Science and Engineering C, 119, 111623, 2021.
• J. Wang, G.-L. Xu, X. Zeng, J. LLorca, Y. Cui. - Exploring diffusion mobility and creep deformation of Mg-Ga hcp binary alloys from liquid-solid diffusion couple.. Materials and Design, 197, 109243, 2021.
• Z. Liu, J. Snel, T. Boll, J.-Y. Wang, M. A. Monclús, J. M. Molina-Aldareguía, J. LLorca. - High temperature strength retention of Cu/Nb nanolaminates through dynamic strain ageing.. Materials Science and Engineering A, 799, 140117, 2021.

2020

• S. Liu, G. Esteban-Manzanares, J. LLorca. - First-principles analysis of precipitation in Mg-Zn alloys,. Physical Review Materials, 4, 093609, 2020.
• L. W. Yang, C. R. Mayer, N. Chawla, J. LLorca, J. M. Molina-Aldareguía. - Nanomechanical characterization of the fracture toughness of Al/SiC nanolaminates.. Extreme Mechanics Letters, 40, 100945, 2020.
• M. A. Monclús, L. Yang, I. López-Cabañas, M. Castillo-Rodríguez, A. Zaman, J. Wang, E. I. Meletis, R. González-Arrabal, J. LLorca, J. M. Molina-Aldareguía. - High temperature mechanical properties and microstructure of hard TaSiN coatings.. Materials Science and Engineering A, 797, 139976, 2020.
• F. Martínez-Hergueta, A. Pellegrino, A. Ridruejo, N. Petrinic, C. González, J. LLorca. - Dynamic tensile testing of needlepunched nonwoven fabrics. Applied Sciences, 10, 5081, 2020.
• S. Liu, E. Martínez, J. LLorca. - Prediction of the Al-rich part of the Al-Cu phase diagram from cluster expansion and statistical mechanics.. Acta Materialia, 195, 317-326, 2020.
• B. Bellón, S. Haouala, J. LLorca - An analysis of the influence of the precipitate type on the mechanical behavior of Al-Cu alloys by means of micropillar compression tests.. Acta Materialia, 194, 207-223, 2020.
• G. Esteban-Manzanares, R. Alizadeh, I. Papadimitriou, D. Dickel, C. D. Barrett, J. LLorca. - Atomistic simulations of the interaction of basal dislocations with MgZn2 precipitates in Mg alloys.. Materials Science and Engineering A, 788, 139555, 2020.
• Z. Zhao, T. R. Bieler, J. LLorca, P. Eisenlohr, - Grain boundary slip transfer classification and metric selection with artificial neural networks,. Scripta Materialia, 185, 71-75, 2020.
• E. Van der Giessen, P. Schultz, N. Bertin, V. Bulatov, W. Cai, G. Csanyi, S. Foiles, M. G. D. Geers, C. González, M. Huetter, W. K. Kim, D. Kochmann, J. LLorca, A. Mattsson, J. Rottler, A. Shluger, R. Sills, I. Steinbach, A. Strachan, E. Tadmor. - Roadmap on Multiscale Materials Modelling. Modelling and Simulation in Materials Science and Engineering, 28, 043001, 2020.
• R. Santos-Güemes, B. Bellón, G. Esteban-Manzanares, J. Segurado, L. Capolungo, J. LLorca. - Multiscale modelling of precipitation hardening in Al-Cu alloys: dislocation dynamics simulations and experimental validation.. Acta Materialia, 188, 475-485, 2020.
• J. Wang, J. M. Molina-Aldareguía, J. LLorca. - Effect of Al content on the critical resolved shear stress for twin nucleation and growth in Mg alloys. Acta Materialia, 188, 215-227, 2020.
• R. Alizadeh, J. LLorca. - Interaction between basal dislocations and β’1 precipitates in Mg-4Zn alloy: Mechanisms and strengthening.. Acta Materialia, 186, 475-486, 2020.
• S. Haouala, R. Alizadeh, T. R. Bieler, J. Segurado, J. LLorca. - Effect of slip transmission at grain boundaries in Al bicrystals.. International Journal of Plasticity, 126, 102600, 2020.
• R. Alizadeh, M. Peña-Ortega, T. R. Bieler, J. LLorca. - A criterion for slip transfer at grain boundaries in Al.. Scripta Materialia, 78, 408-412, 2020.
• M. Marvi-Mashhadi, C. S. Lopes, J. LLorca. - High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams.. Journal of the Mechanics and Physics of Solids, 135, 103814, 2020.
• G. Esteban-Manzanares, R. Santos-Güemes, I. Papadimitriou, E. Martínez, J. LLorca - Influence of the stress state on the cross-slip free energy barrier in Al: an atomistic investigation.. Acta Materialia, 184, 109-119, 2020.
• S. Haouala, S. Lucarini, J. LLorca, J. Segurado. - Simulation of the Hall-Petch effect in FCC polycrystals by means of strain gradient crystal plasticity and FFT homogenization.. Journal of the Mechanics and Physics of Solids, 134, 103755, 2020.

2019

• G. Esteban-Manzanares, B. Bellón, E. Martínez, I. Papadimitriou, J. LLorca. - Strengthening of Al-Cu alloys by Guinier-Preston zones: predictions from atomistic simulations.. Journal of the Mechanics and Physics of Solids, 132, 103675, 2019.
• G. Esteban-Manzanares, A. Ma, I. Papadimitriou, E. Martínez, J. LLorca. - Basal dislocation/precipitate interactions in Mg-Al alloys: an atomistic investigation.. Modelling and Simulation in Materials Science and Engineering, 27, 075003, 2019.
• Z. Liu, I. Papadimitriou, M. Castillo-Rodríguez, C. Wang, G. Esteban-Manzanares, X. Yuan, H. H. Tan, J. M. Molina-Aldareguía, J. LLorca. - Mechanical behavior of InP twinning superlattice nanowires.. Nano Letters, 19, 4490-4497, 2019
• R. A. Rubio, S. Haouala, J. LLorca. - Grain boundary strengthening of FCC polycrystals.. Journal of Materials Research, 34, 2263-2274, 2019.
• J. Y. Wang, W. Zheng, G. Xu, J. LLorca, Y. Cui. - High-throughput extraction of the anisotropic interdiffusion coefficients in hcp Mg-Al alloys.. Journal of Alloys and Compounds, 805, 237-246, 2019.
• M. Pushkareva, F. Sket, J. Segurado, J. LLorca, M. Yandouzi, A. Weck. - Effect of grain orientation and local strain on void growth in titanium.. Materials Science and Engineering A, 760, 258-266, 2019.
• T. R. Bieler, R. Alizadeh, M. Peña-Ortega, J. LLorca. - An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al.. International Journal of Plasticity, 118, 269-290, 2019.
• I. J. Beyerlein, S. Xu, J. LLorca, J. A. El-Awady, J. R. Mianroodi, B. Svendsen. - Alloy design for mechanical properties: Conquering the length scales. MRS Bulletin, 44, 257-265, 2019.
• J.-Y. Wang, N. Li, R. Alizadeh, M. A. Monclús, Y. W. Cui, J. M. Molina-Aldareguía, J. LLorca - Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys.. Acta Materialia, 170, 155-165, 2019.
• H. Liu, I. Papadimitriou, F. X. Lin, J. LLorca. - Precipitation during high temperature aging of Al-Cu alloys: a multiscale analysis based on first principles calculations.. Acta Materialia, 167, 121-135, 2019.
• G. Esteban-Manzanares, E. Martínez, J. Segurado, L. Capolungo, J. LLorca. - An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys.. Acta Materialia, 162, 189-201, 2019.
• S. Sádaba, M. Herráez, F. Naya, C. González, J. LLorca, C. S. Lopes. - Special-purpose elements to impose periodic boundary conditions for computational homogenization using explicit finite elements.. Composites and Structures, 208, 434-441, 2019.

2018

• J. Segurado, R. A. Lebensohn, J. LLorca - Computational homogenization of polycrystals.. Advances in Applied Mechanics, 51, 1-114, 2018.
• Z. Liu, M. A. Monclús, L. W. Yang, M. Castillo-Rodríguez, J. M. Molina-Aldareguía, J. LLorca. - Tensile deformation and fracture mechanisms of Cu/Nb nanolaminates studied by in-situ TEM mechanical tests.. Extreme Mechanics Letters, 25, 60-65, 2018.
• M. Marvi-Mashhadi, C. S. Lopes, J. LLorca - Effect of anisotropy on the mechanical properties of polyurethane foams: an experimental and numerical study.. Mechanics of Materials, 124, 143-154, 2018
• M. Marvi-Mashhadi, C. S. Lopes, J. LLorca - Surrogate models of the influence of the microstructure on the mechanical properties of closed- and open-cell foams.. Journal of Materials Science, 53, 12937-12948, 2018
• M. Marvi-Mashhadi, C. S. Lopes, J. LLorca - Modelling of the mechanical behavior of the polyurethane foams by means of micromechanical characterization and computational homogenization.. International Journal of Solids and Structures, 146, 154-166, 2018
• R. Santos-Güemes, G. Esteban-Manzanares, I. Papadimitriou, J. Segurado, L. Capolungo, J. LLorca - Discrete dislocation dynamics simulations of dislocation-θ’ precipitate interaction in Al-Cu alloys.. Journal of the Mechanics and Physics of Solids, 118, 228-244, 2018
• L. W. Yang, C. Y. Wang, M. A. Monclús, L. Lu, J. M. Molina-Aldareguía, J. LLorca - Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu.. Scripta Materialia, 154, 54-59, 2018
• A. Rodríguez-Veiga, B. Bellón, I. Papadimitriou, G. Esteban-Manzanares, I. Sabirov, J. LLorca - A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4wt.%Cu alloy.. Journal of Alloys and Compounds, 757, 504-519, 2018
• J. LLorca - On the quest for the strongest materials.. Science, 360, (6386), 264-265, 2018
• A. Cruzado, S. Lucarini, J. LLorca, J. Segurado - Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718. International Journal of Fatigue, 113, 236-245, 2018
• D. Garijo, F. Martínez, C. S. Lopes, J. LLorca, C. González, J. L. Puente, J. A. Loya, J. Toral-Vázquez, V. Votsios, E. Martino - Multiscale FE modelling and design of composite laminates under impact. Comprehensive Composite Materials II, Vol. 8, pp. 219-238, 2018
• J. LLorca - Void Formation in Metal Matrix Composites. Comprehensive Composite Materials II, Vol. 4, pp. 65-80, 2018
• S. Haouala, J. Segurado, J. LLorca - An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization. Acta Materialia, 148, 72-85, 2018
• M. A. Monclús, L. W. Yang, M. Callisti, T. Polcar, J. M. Molina-Aldareguía, J. LLorca - Effect of layer thickness on the mechanical behavior of oxidation-strengthened Zr/Nb nanoscale multilayers. Journal of Materials Science, 53, 5860-5878, 2018
• W. Tan, F. Naya, T. Chang, L. Yang, B. G. Falzon, L. Zhan, J. Molina, C. González, J. LLorca - The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: experimental characterization and multiscale modelling. Composites B, 138, 206-221, 2018
• L. W. Yang, C. R. Mayer, N. Li, J. K. Baldwin, N. A. Mara, N. Chawla, J. M. Molina-Aldareguía, J. Llorca - Mechanical properties of metal-ceramic nanolaminates: effect of constraint and temperature. Acta Materialia, 142, 37-48, 2018
• F. Martínez-Hergueta, A. Ridruejo, C. González, J. LLorca - Ballistic performance of hybrid nonwoven/woven polyethyelene fabric shields. International Journal of Impact Engineering, 111, 55-65, 2018
• A. Cruzado, S. Lucarini, J. LLorca, J. Segurado - Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior. International Journal of Fatigue, 107, 40-48, 2018

2017

• M. A. Monclús, M. Callisti, T. Polcar, L.W. Yang, J. LLorca, J. M. Molina-Aldareguía - Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers. Acta Materialia, 122, 1-10, 2017
• F. Naya, J. M. Molina-Aldareguía, C. S. Lopes, C. González, J. LLorca - Interface characterization in fiber-reinforced polymer-matrix composites. JOM, 69, 13-21, 2017
• F. Martínez-Hergueta, A. Ridruejo, C. González, J. LLorca - Numerical simulation of the ballistic response of needle-punched nonwoven fabrics. International Journal of Solids and Structures, 106–107, 56–67, 2017
• J. Vilà, C. González, J. LLorca - Fabric compaction and infiltration during vacuum-assisted resin infusion with and without distribution medium. Journal of Composite Materials, 687-703, 2017
• H. Liu, B. Bellón, J. LLorca - Multiscale modelling of the morphology and spatial distribution of θ’ precipitates in Al-Cu alloys. Acta Materialia, 132, 611–626, 2017
• B. C. Jin, X. Li, A. Jain, M. Herráez, C. González, J. Llorca, S. R. Nutt - Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg. Composites Structures, 174, 389–398, 2017
• C. González, J. J. Vilatela, J. M. Molina-Aldareguía, C. S. Lopes, J. LLorca - Structural composites for multifunctional applications: current challenges and future trends. Progress in Materials Science, 89, 194–251, 2017
• A. Cruzado, J. LLorca, J. Segurado - Modeling cyclic deformation of Inconel 718 superalloy by means of crystal plasticity and computational homogenization. International Journal of Solids and Structures, 122-123, 148-161, 2017
• B. C. Jin, X. Li, A. Jain, M.-S. Wu, R. Mier, M. Herraez, C. Gonzalez, J. LLorca, S. R. Nutt - Prediction of stiffness of reused carbon fiber/epoxy composite oriented strand board using finite element methods. JOM, 69, 2214-2226, 2017
• J. Snel, M. A. Monclús, M. Castillo-Rodríguez, N. Mara, I.J. Beyerlein, J. LLorca, J. M. Molina-Aldareguía - Deformation mechanisms map of Cu/Nb nanoscale metallic multilayers as a function of temperature and layer thickness. JOM, 69, 2214-2226, 2017

2016

• F. Martínez-Hergueta, A. Ridruejo, F. Gálvez, C. González, J. LLorca - Influence of fiber orientation on the ballistic performance of needlepunched nonwoven fabrics. Mechanics of Materials, 94, 106-116, 2016
• C. Mayer, L. W. Wang, S. S. Singh, H. Xie, Y.-L. Shen, J. Llorca, J. Molina-Aldareguia, N. Chawla - Orientation dependence of indentation behavior in Al-SiC nanolaminate composites. Materials Letters, 168, 129–133, 2016
• A. Ridruejo, J. Segurado, E. C. Moreno-Valle, I. Sabirov, J. LLorca - Multiscale modeling of the small punch test in nanostructured Ti. Meccanica, 51, 443–453, 2016
• X. Zhao, F. R. Guerrero, J. LLorca, D. Y. Wang - A new super-efficiently flame retardant bioplastic-poly (lactic acid): flammability, thermal decomposition behavior and tensile properties. ACS Sustainable Chemistry & Engineering, 4, 202-209, 2016
• G. Xu, C. Wang, J. I. Beltrán, J. LLorca, Y. Cui - Landau modeling of dynamical nucleation of martensite at grain boundaries under local stress. Computational Materials Science, 118, 103-111, 2016
• H.-J. Chang, J. Segurado, J. M. Molina-Aldareguía, R. Soler, J. LLorca - A 3D dislocation dynamics analysis of the size effect on the strength of [111] LiF micropillars at 300K and 600K. Modelling and Simulation in Materials Science and Engineering, 24, 035009, 2016
• X. Zhao, S. de Juan, F. Reyes Guerrero, Z. Li, J. LLorca, D. Y. Wang - Effect of N,N’-diallyl-phenylphosphoricdiamide on ease of ignition, thermal decomposition behavior and mechanical properties of poly(lactic acid). Polymer Degradation and Stability, 127, 2-10, 2016
• C. Medina, J. M. Molina-Aldareguía, C. González, M. F. Melendrez, P. Flores, J. LLorca - Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. Journal of Composite Materials, 50, 1651-1659, 2016
• C. S. Lopes, S. Sádaba, C. González, J. LLorca, P. P. Camanho - Physically-sound simulation of low-velocity impact on fibre reinforced laminates. International Journal of Impact Engineering, 92, 3-17, 2016
• C. R. Mayer, L. W. Yang, S. S. Singh, J. LLorca, J. M. Molina-Aldareguía, Y.-L. Shen, N. Chawla - Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites. Acta Materialia, 114, 25-32, 2016
• M. Pushkareva, J. Adrien, E. Maire, J. Segurado, J. Llorca, A.Weck - Three-dimensional investigation of void growth leading to fracture in commercially pure titanium.. Materials Science and Engineering A, 671, 221–232, 2016
• X. M. Zhao, H. V. Babu, J. Llorca, D.-Y. Wang - Impact of halogen-free flame retardant with varied phosphorus’s chemical surrounding on the properties of diglycidyl ether of bisphenol-A type epoxy resin: synthesis, fire behavior, flame-retardant mechanism and mechanical properties. RSC Advances, 6, 59226-59236, 2016
• F. Martínez-Hergueta, A. Ridruejo, C. González, J. LLorca - A multiscale micromechanical model of needlepunched nonwoven fabrics. International Journal of Solids and Structures, 96, 81–91, 2016
• F. Sket, A. Enfedaque, C. Díaz López, C. González, J. Molina-Aldareguía, J. LLorca - X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear. Composites Science and Technology, 133, 40-50, 2016
• Y. Chen, A. Ridruejo, C. Gonzalez, J. Llorca, T. Siegmund - Notch effect in failure of fiberglass non-woven materials. International Journal of Solids and Structures, 96, 254–264, 2016
• J. Wang, N. Li, C. Wang, J. I. Beltran, J. LLorca, Y. Cui - Computational study of atomic mobility in HCP Mg-Al-Zn ternary alloys. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 54, 134-143, 2016
• C. S. Lopes, C. González, O. Falco, F. Naya, J. LLorca, B. Tijs - Multiscale virtual testing: the roadmap to efficient design of composites for damage resistance and tolerance. CEAS Aeronautical Journal, doi:10.1007/s13272-016-0210-7, 2016
• M. Jalalvand, G. Czél, J. D. Fuller, M. R. Wisnom, L. P. Canal, C. D. González, J. LLorca - Energy dissipation during delamination in composite materials – An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip. Composites Science and Technology, 134, 115-124, 2016
• M. Herráez, C. González, C. S. Lopes, R. Guzmán de Villoria, J. LLorca, T. Blanco, J. Sánchez-Gómez - Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design. Composites, A 91, 484–492, 2016
• L. W. Yang, C. Mayer, N. Chawla, J. LLorca, J. M. Molina-Aldareguía - Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature. Philosophical Magazine, 96, 3336-3355, 2016

2015

• H.-J. Chang, J. Segurado, J. LLorca - Three dimensional dislocation dynamics analysis of size effects on void growth. Scripta Materialia, 95, 11-14, 2015
• F. Sket, M. Rodríguez-Hortalá, J. M. Molina-Aldareguía, J. LLorca, E. Maire, G. Requena - Tomographic investigation of damage development during tensile loading of ±45° carbon fibre reinforced laminates. Materials Science and Technology, 31, 587-593, 2015
• S. Sádaba, I. Romero, C. González, J. LLorca - A stable X-FEM in cohesive transition from closed to open crack.. International Journal for Numerical Methods in Engineering, 101, 540-570, 2015
• A. Ridruejo, R. Jubera, C. González, J. LLorca - Inverse notch sensitivity: cracks can make nonwoven fabrics stronger. Journal of the Mechanics and Physics of Solids, 77, 61-69, 2015
• M. Herráez, D. Mora, F. Naya, C. S. Lópes, C. González, J. LLorca - Transverse cracking of cross-ply laminates: a computational micromechanics perspective. Composites Science and Technology, 110, 196-204, 2015
• R. Muñoz, F. Martínez-Hergueta, F. Gálvez, C. González, J. LLorca - Ballistic performance of hybrid 3D woven composites: experiments and simulations. Composite Structures, 127, 141–151, 2015
• P. Hidalgo-Manrique, V. Herrera-Solaz, J. Segurado, J. LLorca, F. Gálvez, O. A. Ruano, S. Yi, M. T. Pérez-Prado - Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature. Acta Materialia, 92, 265–277, 2015
• F. Martínez-Hergueta, A. Ridruejo, C. González, J. LLorca - Deformation and energy dissipation mechanisms of needle-punched nonwoven fabrics: a multiscale experimental analysis. International Journal of Solids and Structures, 64–65, 120–131, 2015
• A. Cruzado, B. Gan, M. Jiménez, D. Barba, K. Ostolaza, A. Linaza, J. M. Molina-Aldareguia, J. Llorca, J. Segurado - Multiscale modeling of the mechanical behavior of IN718 superalloy based on micropillar compression and computational homogenization. Acta Materialia, 98, 242–253, 2015
• R. Muñoz, C. González, J. LLorca - Mechanisms of in-plane shear deformation in hybrid 3D woven composites. Journal of Composite Materials, 49, 3755-3763, 2015
• V. Herrera-Solaz, J. Segurado, J. LLorca - On the robustness of an inverse optimization approach based on the Levenberg-Marquardt method for the mechanical behavior of polycrystals. European Journal of Mechanics A/Solids, 53, 220-228, 2015
• J. Vilá, F. Sket, F. Wilde, G. Requena, C. González, J. LLorca - An in situ investigation of microscopic flow and void transport during vacuum-assisted infiltration by means of X-ray computed tomography. Composites Science and Technology, 119, 12-19, 2015
• H. Yue, A. Monreal-Bernal, J. P. Fernández-Blázquez, J. LLorca, J. J. Vilatela - Interfacial nucleation of semicrystalline polymers on macroscopic CNT fibers. Scientific Reports, 5, 16729, 2015
• G. Czél, M. Jalalvand, M. R. Wisnom, L. P. Canal, C. González, J. LLorca - Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law. Engineering Fracture Mechanics, 149, 326–337, 2015