Publication

    2020

  • Bergan, A.C., Herráez, M., González, C., Lopes, C.S. - A constitutive model for fiber kinking: Formulation, finite element implementation, and verification. composites part a-applied science and manufacturing 129, 2020. DOI: 10.1016/j.compositesa.2019.105682

    • 2019

  • Li, XC., Miyauchi, M., Gonzalez, C., Nutt, S. - Thermal oxidation of PEPA-terminated polyimide. high performance polymers 31, 2019. DOI: 10.1177/0954008318787852
  • Torres, J.J., Simmons, M., Sket, F., González, C. - An analysis of void formation mechanisms in out-of-autoclave prepregs by means of X-ray computed tomography. composites part a-applied science and manufacturing 117, 2019. DOI: 10.1016/j.compositesa.2018.11.010
  • Sadaba, S.; Herraez, M.; Naya, F.; Gonzalez, C.; Llorca, J.; Lopes, C.S. - Special-purpose elements to impose Periodic Boundary Conditions for multiscale computational homogenization of composite materials with the explicit Finite Element Method. composite structures 208, 434-441, 2019. DOI: 10.1016/j.compstruct.2018.10.037
  • Mugica, JI., Lopes, CS., Naya, F., Herraez, M., Martinez, V., Gonzalez, C. - Multiscale modelling of thermoplastic woven fabric composites: From micromechanics to mesomechanics. composite structures 228, 2019. DOI: 10.1016/j.compstruct.2019.111340
  • Riezzo, M., Simmons, M., Russel, B., Sket, F., Martínez, V., González, C. - Dynamic characterisation of interlaminar fracture toughness in carbon fibre epoxy composite laminates. composites part a 126, 2019. DOI: 10.1016/j.compositesa.2019.105597
  • Haldar, S., Herráez, M., Naya, F., González, C., Lopes, C.S - Relations between intralaminar micromechanisms and translaminar fracture behavior of unidirectional FRP supported by experimental micromechanics. composites part b 174, 2019. DOI: 10.1016/j.compositesb.2019.107000
  • Ou, Y., González, C., Vilatela, J.J. - Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils. composites part a-applied science and manufacturing 124, 2019. DOI: 10.1016/j.compositesa.2019.105477

    • 2018

  • Herraez, M.; Gonzalez, C.; Lopes, C. S. - A numerical framework to analyze fracture in composite materials: From R-curves to homogenized softening laws. international journal of solids and structures 134, 216-228, 2018. DOI: 10.1016/j.ijsolstr.2017.10.031
  • Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J. - Modelling of the mechanical behavior of polyurethane foams by means of micromechanical characterization and computational homogenization. international journal of solids and structures 146, 154-166, 2018. DOI: 10.1016/j.ijsolstr.2018.03.026
  • Falco, O.; Avila, R. L.; Tijs, B.; Lopes, C. S. - Modelling and simulation methodology for unidirectional composite laminates in a Virtual Test Lab framework. composite structures 190, 137-159, 2018. DOI: 10.1016/j.compstruct.2018.02.016
  • Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J. - Surrogate models of the influence of the microstructure on the mechanical properties of closed- and open-cell foams. journal of materials science 53, 12937-12948, 2018. DOI: 10.1007/s10853-018-2598-4
  • Garcia-Carpintero, A.; van den Beuken, B. N. G.; Haldar, S.; Herraez, M.; Gonzalez, C.; Lopes, C. S. - Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach. engineering fracture mechanics 188, 268-286, 2018. DOI: 10.1016/j.engfracmech.2017.08.034
  • Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J. - Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design (vol 91, pg 484, 2016). composites part a-applied science and manufacturing 112, 572-572, 2018. DOI: 10.1016/j.compositesa.2018.05.024
  • Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J. - Effect of anisotropy on the mechanical properties of polyurethane foams: An experimental and numerical study. mechanics of materials 124, 143-154, 2018. DOI: 10.1016/j.mechmat.2018.06.006

    • 2017

  • Naya, F.; Herraez, M.; Lopes, C. S.; Gonzalez, C.; Van der Veen, S.; Pons, F. - Computational micromechanics of fiber kinking in unidirectional FRP under different environmental conditions. composites science and technology 144, 26-35, 2017. DOI: 10.1016/j.compscitech.2017.03.014
  • Naya, F.; Gonzalez, C.; Lopes, C. S.; Van der Veen, S.; Pons, F. - Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects. composites part a-applied science and manufacturing 92, 146-157, 2017. DOI: 10.1016/j.compositesa.2016.06.018
  • Naya, F.; Molina-Aldareguia, J. M.; Lopes, C. S.; Gonzalez, C.; Llorca, J. - Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites. jom 69, 13-21, 2017. DOI: 10.1007/s11837-016-2128-2
  • A. García-Carpintero, M. Herráez, J. Xu, C. S. Lopes, and C. González - A Multi Material Shell Model for the Mechanical Analysis of Triaxial Braided Composites. applied composite materials 25, 1425-1445, 2017. DOI: 10.1007/s10443-017-9593-9
  • O. Falco, C. S. Lopes, F. Naya, F. Sket, P. Maimi, and J. A. Mayugo - Modelling and simulation of tow-drop effects arising from the manufacturing of steered-fibre composites. composites part a-applied science and manufacturing 93, 59-71, 2017. DOI: 10.1016/j.compositesa.2016.11.015
  • M. Herráez, F. Naya, C. González, M. Monclús, J.M. Molina-Aldareguía, C.S. Lopes, J. Llorca - Microscale characterization techniques of Fibre Reinforced Polymers. The Structural Integrity of Carbon Fibre Composites – Fifty Years of Progress and Achievement of the Science, Development, and Applications, 283-299, 2017. DOI: 10.1007/978-3-319-46120-5_10
  • D. Garijo, F. Martínez-Hergueta, C.S. Lopes, J. LLorca, C. González, J. López Puente, J.A. Loya, J. Toral-Vázquez, E. Martino - Multiscale FE Modelling and Design of Composite Laminates under Impact. comprehensive composite materials ii Edts. C. Soutis, and A. Johnson, Elsevierpp, 219-238, 2017. DOI:
  • M. Herráez, C. González, C.S. Lopes. - A numerical framework to analyze fracture in composite materials: From R-curves to homogenized softening laws.. international journal of solids and structures , 2017. DOI: 10.1016/j.ijsolstr.2017.10.031
  • Gonzalez, C.; Vilatela, J. J.; Molina-Aldareguia, J. M.; Lopes, C. S.; LLorca, J. - Structural composites for multifunctional applications: Current challenges and future trends. progress in materials science 89, 194-251, 2017. DOI: 10.1016/j.pmatsci.2017.04.005
  • A. García-Carpintero, B. van den Beuken, S. Haldar, M. Herráez, C. González, C.S. Lopes - Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach. engineering fracture mechanics , 2017. DOI: 10.1016/j.engfracmech.2017.08.034

    • 2016

  • Gonzalez, Carlos; Lopes, Claudio; LLorca, Javier; Wisnom, Michael R.; Pierron, Fabrice - CompTest 2015-Composites testing and model identification international conference, 8-10 April 2015 in Madrid, Spain. composites part a-applied science and manufacturing 91, 407-408, 2016. DOI: 10.1016/j.compositesa.2016.11.010
  • Herraez, M.; Fernandez, A.; Lopes, C. S.; Gonzalez, C. - Strength and toughness of structural fibres for composite material reinforcement. philosophical transactions of the royal society a-mathematical physical and engineering sciences 374, 2016. DOI: 10.1098/rsta.2015.0274
  • Lopes, C. S.; Sadaba, S.; Gonzalez, C.; Llorca, J.; Camanho, P. P. - Physically-sound simulation of low-velocity impact on fiber reinforced laminates. international journal of impact engineering 92, 3-17, 2016. DOI: 10.1016/j.ijimpeng.2015.05.014
  • Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J. - Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design. composites part a-applied science and manufacturing 91, 484-492, 2016. DOI: 10.1016/j.compositesa.2016.02.026
  • Lopes, C.S., González, C., Falcó, O., F. Naya, J. Llorca, B. Tijs - Multiscale virtual testing: the roadmap to efficient design of composites for damage resistance and tolerance. ceas aeronautical journal , 2016. DOI: 10.1007/s13272-016-0210-7
  • F. Sket, A. Enfedaque, C. Díaz López, C. González, J.M. Molina Aldareguía, J. Llorca - X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear. composites science and technology 133, 40-50, 2016. DOI: 10.1016/j.compscitech.2016.06.012

    • 2015

  • G. Vigueras, F.Sket, C. Samaniego, L. Wu, L. Noels, N. Tjahjanto, E. Casoni, G. Houzeaux, A. Makradi, J.M. Molina-Aldareguia, M. Vázquez, A. Jérusalem - An XFEM/CZM implementation for massively parallel simulations of composites fracture. composite structures 125, 542-557, 2015. DOI: 10.1016/j.compstruct.2015.01.053
  • L. Wu, F. Sket, J.M. Molina-Aldareguia, A. Makradi, L. Adam, I. Doghri, L. Noels - A study of composite laminates failure using an anisotropic gradient-enhanced damage mean-field homogenization model. composite structures 126, 246-264, 2015. DOI: 10.1016/j.compstruct.2015.02.070
  • F. Sket, M. Rodríguez-Hortalá, J. M. Molina-Aldareguía, J. LLorca, E. Maire, G. Requena - Tomographic investigation of damage development during tensile loading of ±45° carbon fibre reinforced laminates. materials science and technology 31, 587-593, 2015. DOI:
  • S. Sádaba, I. Romero, C. González, J. LLorca - A stable X-FEM in cohesive transition from closed to open crack. international journal for numerical methods in engineering 101, 540-570, 2015. DOI:
  • A. Ridruejo, R. Jubera, C. González, J. LLorca - Inverse notch sensitivity: cracks can make nonwoven fabrics stronger. journal of the mechanics and physics of solids 77, 61-69, 2015. DOI:
  • Herraez, Miguel; Mora, Diego; Naya, Fernando; Lopes, Claudio S.; Gonzalez, Carlos; LLorca, Javier - Transverse cracking of cross-ply laminates: A computational micromechanics perspective. composites science and technology 110, 196-204, 2015. DOI: 10.1016/j.compscitech.2015.02.008
  • S. Sádaba, F. Martínez, C. Lopes, C. González, J. LLorca - Virtual testing of velocity impact in c/epoxy laminates. structural integrity and durability of advanced composites (Woodhead Publishing Ltd), 2015. DOI:
  • F. Naya, C.S. Lopes, C. González, J. LLorca - Computational micromechanics strategies for the analysis of failure in unidirectional composites. numerical modelling of failure in advanced composite materials (Woodhead Publishing Ltd), 2015. DOI:
  • C.S. Lopes, S. Sádaba, C. González, J. LLorca and P. P. Camanho - Physically-Sound Simulation of Low-Velocity Impact on Fibre Reinforced Laminates. international journal of impact engineering , 2015. DOI: 10.1016/j.ijimpeng.2015.05.014
  • C. Medina; J. Molina-Aldareguía, C. González; M. Meléndez; P. Flores; J. LLorca - Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. journal of composite materials , 2015. DOI: 10.1177/0021998315595115
  • F. Sket, M. Rodríguez Hortalá, J. Molina Aldareguía, J. Llorca, E. Maire, G. Requena - In-situ tomographic investigation of damage development in ±45° carbon fibre reinforced laminates. materials science and technology Special Issue 'Cavitation studies in materials: new insights from modern techniques in 2D/3D/4D characterisation, 31(5), 587-593, 2015. DOI: 10.1179/1743284714Y.0000000561

    • 2014

  • R. Muñoz, V. Martínez, F. Sket, C. González, J.Llorca - Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension. composites part a 59, 93-104, 2014. DOI:
  • H.-B. Yue, J. P. Fernandez-Blázquez, D. F. Beneito, J. J. Vilatela - Real time monitoring of click chemistry self-healing in polymer composites. journal of materials chemistry a 2, 3881-3887, 2014. DOI:
  • Falco, O.; Mayugo, J. A.; Lopes, C. S.; Gascons, N.; Turon, A.; Costa, J. - Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior. composites part b-engineering 56, 660-669, 2014. DOI: 10.1016/j.compositesb.2013.09.003
  • R. Muñoz, S. Delgado, C. González, B. López-Romano, D.-Y. Wang, J. Llorca - Modeling lightning impact thermo-mechanical damage in composite materials. 21, 149-164, 2014. DOI:
  • R. Jubera, A. Ridruejo, C. González, J. LLorca - Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate. mechanics of materials 74, 14-25, 2014. DOI:
  • D. A. Vajari, C. González, J. LLorca, B. N. Legarth - A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. composites science and technology 97, 46-54, 2014. DOI:
  • J. Vilà, C. González, J. LLorca - A level set approach for the analysis of flow and compaction during resin infusion in composite materials. composites part a 67, 299-307, 2014. DOI:

    • 2013

  • S. Hernández, F. Sket, C. González, J. LLorca - Optimization of curing cycle in carbon fiber-reinforced laminates: void distribution and mechanical properties. composites science and technology 85, 73-82, 2013. DOI:
  • Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J. - Damage resistance and damage tolerance of dispersed CFRP laminates: The bending stiffness effect. composite structures 106, 30-32, 2013. DOI: 10.1016/j.compstruct.2013.05.046
  • A. Salazar, A. Rico, J. Rodríguez, J. Segurado Escudero, R. Seltzer, F. Martin de la Escalera Cutillas - Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature. composites part b 59, 285-292, 2013. DOI:
  • V. S. Gomes, C. S. Lopes, F. M. Andrade Pires, Z. Gürdal, P. P. Camanho - Fibre Steering for Shear Loaded Composite Panels with Cutouts. journal of composite materials July 4, 2013. DOI:
  • F. A. López, O. Rodrígueza, F. J. Alguacil, I. García-Díaz, T. A. Centeno, J. L. García-Fierro, C. González - Recovery of carbon fibres by the thermolysis and gasification of waste prepreg. journal of analytical and applied pyrolysis 103, 675-683, 2013. DOI:
  • Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J. - Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of ply clustering. composite structures 106, 96-103, 2013. DOI: 10.1016/j.compstruct.2013.05.052
  • Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Mayugo, J. A.; Costa, J. - Two-pheromone Ant Colony Optimization to design dispersed laminates for aeronautical structural applications. advances in engineering software 66, 10-18, 2013. DOI: 10.1016/j.advengsoft.2013.02.002
  • F. Sket, A. Enfedaque, C. Alton, C. González, J.M. Molina-Aldareguía, J. Llorca - Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates. composites science and technology 90, 129-138, 2013. DOI: 10.1016/j.compscitech.2013.10.022
  • Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J. - Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization. composite structures 95, 569-576, 2013. DOI: 10.1016/j.compstruct.2012.07.005
  • R. Seltzer, C. González, R. Muñoz, J. LLorca, T. Blanco-Varela - X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact. composites part a 45, 49-60, 2013. DOI:
  • Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Maimi, P.; Costa, J. - Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies. composite structures 101, 255-264, 2013. DOI: 10.1016/j.compstruct.2013.01.026
  • Llorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Lopes, C. S. - Multiscale Modeling of Composites: Toward Virtual Testing … and Beyond. jom 65, 215-225, 2013. DOI: 10.1007/s11837-012-0509-8
  • L. Wu, D. Tjahjanto, G. Becker, A. Makradi, A. Jérusalem, L. Noels - A micro–meso-model of intra-laminar fracture in fiber-reinforced composites based on a discontinuous Galerkin/cohesive zone method. engineering fracture mechanics 104, 162-183, 2013. DOI:

    • 2012

  • K. Raghu Raja Pandiyan, N. Swati - Viscosity modeling of a medium reactive unsaturated polyester resin used for liquid composite molding process. journal of applied polymer science 125, 350-359, 2012. DOI:
  • K. Raghu Raja Pandiyan, V. M. Shinde, S. Neogi - Measurement of effective permeability of reinforcement mats using sensitivity analysis. polymer composites 33, 1445-1454, 2012. DOI:
  • L. P. Canal, C. González, J. M. Molina-Aldareguía, J. Segurado, J. LLorca - Application of digital image correlation at the microscale in fiber-reinforced composites. composites part a 43, 1630-1638, 2012. DOI:
  • J. J. Williams, J. Segurado, J. LLorca, N. Chawla - Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites. materials science and engineering A 557, 113-118, 2012. DOI:
  • M. Rodríguez, J. M. Molina-Aldareguía, C. González, J. LLorca - A methodology to measure the interface shear strength by means of the fiber push-in test. composites science and technology 72, 1924-1932, 2012. DOI:
  • E. Lorenzo-Villafranca, K. Tamargo-Martínez, J. M. Molina-Aldareguia, C. González, A. Martínez-Alonso, J. M. D. Tascón, M. Gracia, J. LLorca - Influence of plasma surface treatments on kink band formation in PBO fibers during compression. journal of applied polymer science 123, 2052-2063, 2012. DOI:
  • N. Lachman, E. Wiesel, R. Guzmán de Villoria, B. L. Wardle, H. D. Wagner - Interfacial load transfer in carbon nanotube/ceramic microfiber hybrid polymer composites. composites science and technology 72, 1416-1422, 2012. DOI:
  • E. Galipeau, P. Ponte Castañeda - The effect of particle shape and distribution on the macroscopic behavior of magnetoelastic composites. international journal of solids and structures 49, 1-17, 2012. DOI:
  • F. Sket, R. Seltzer, J. M. Molina-Aldareguía, C. Gonzalez, J. LLorca - Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography. composites science and technology 72, 350-359, 2012. DOI:
  • L. P. Canal, C. González, J. Segurado, J. LLorca - Intraply fracture of fiber-reinforced composites: microscopic mechanisms and modeling. composites science and technology 72, 1223-1232, 2012. DOI:
  • Sebaey, T. A.; Blanco, N.; Costa, J.; Lopes, C. S. - Characterization of crack propagation in mode I delamination of multidirectional CFRP laminates. composites science and technology 72, 1251-1256, 2012. DOI: 10.1016/j.compscitech.2012.04.011
  • A. Ridruejo, C. González, J. LLorca - A constitutive model for the in-plane mechanical behavior of nonwoven fabrics. international journal of solids and structures 49, 2215-2229, 2012. DOI:
  • A. Ridruejo, C. González, J. LLorca - Damage localization and failure locus under biaxial loading in glass-fiber nonwoven felts. international journal for multiscale computational engineering 10, 425-440, 2012. DOI:

    • 2011

  • Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Costa, J. - Ant Colony Optimization for dispersed laminated composite panels under biaxial loading. composite structures 94, 31-36, 2011. DOI: 10.1016/j.compstruct.2011.07.021
  • Sebaey, T. A.; Blanco, N.; Lopes, C. S.; Costa, J. - Numerical investigation to prevent crack jumping in Double Cantilever Beam tests of multidirectional composite laminates. composites science and technology 71, 1587-1592, 2011. DOI: 10.1016/j.compscitech.2011.07.002
  • J. LLorca, C. González, J. M. Molina-Aldareguía, J. Segurado, R. Seltzer, F. Sket, M. Rodríguez, S. Sádaba, R. Muñoz, L. P. Canal - Multiscale modeling of composite materials: a roadmap towards virtual testing. advanced materials 23, 5130-5147, 2011. DOI:
  • S. Hernández, F. Sket, J. M. Molina-Aldareguía, C. González, J. LLorca - Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites. composites science and technology 71, 1331-1341, 2011. DOI:
  • R. Seltzer, F. M. de la Escalera, J. Segurado - Effect of water conditioning on the fracture behavior of PA12 composites processed by selective laser sintering. materials science and engineering 31, 6927-6933, 2011. DOI:
  • M. C. Mesa, P. B. Oliete, V. M. Orera, J. Y. Pastor, A. Martín, J. Llorca - Microstructure and mechanical properties of Al2O3/Er3Al5O12 eutectic rods grown by the laser-heated floating zone method. journal of the european ceramic society 31, 1241-1250, 2011. DOI:
  • J. M. Molina-Aldareguía, M. Rodríguez, C. González, J. LLorca - An experimental and numerical study of the influence of local effects on the application of the fibre push-in test. philosophical magazine 91, 1293-1307, 2011. DOI:

    • 2010

  • J. M. Ullbrand, J.M. Córdoba, J. Tamayo-Ariztondo, M.R. Elizalde, M. Nygren, J. M. Molina-Aldareguia, M. Odén - Thermomechanical Properties of Copper-Carbon Nanofibre Composites Prepared by Spark Plasma Sintering and Hot Pressing. composites science and technology 70, 2263-2268, 2010. DOI:
  • J. M. Molina-Aldareguia and M.R. Elizalde - Metal matrix composites reinforced with nano-size reinforcements. composites science and technology 70, 2227, 2010. DOI:
  • A. Enfedaque, J. M. Molina-Aldareguía, F. Gálvez, C. González, J. LLorca - Effect of glass-fiber hybridization on the behavior under impact of woven carbon fiber/epoxy laminates. journal of composite materials 44, 3051-3068, 2010. DOI:
  • E. Totry, J. M. Molina-Aldareguia, C. González, J. LLorca - Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites. composites science and technology 70, 970-980, 2010. DOI:
  • J. M. Molina-Aldareguía, M. Rodríguez, C. González, J. LLorca - An experimental and numerical study of the influence of local effects on the application of the fibre push-in test. philosophical magazine 90, 2010. DOI:
  • Sabirov, O. Kolednik - Local and global measures of the fracture toughness of metal matrix composites. materials science and engineering a 527, 3100-3110, 2010. DOI:
  • Mortensen, J. LLorca - Metal matrix composites. annual review of materials research 40, 407-410, 2010. DOI:
  • García-Etxarri, J. Aizpurua, J. Molina-Aldareguia, R. Marcilla, J. Pomposo, D. Mecerreyes - Chemical sensing based on the plasmonic response of nanoparticle aggregation: Anion sensing in nanoparticles stabilized by amino-functional ionic liquid. Front. Phys. China, 5, 330-336, 2010. DOI:
  • J. Tamayo-Ariztondo, J. M. Córdoba, M. Odén, J. M. Molina-Aldareguia, M. R. Elizalde - Effect of heat treatment of carbon nanofibres on electroless copper deposition. composites science and technology 70, 2269-2275, 2010. DOI:
  • D. Marcos-Gómez, J. Ching-Lloyd, M.R. Elizalde, W.J. Clegg, J.M. Molina-Aldareguia - Predicting the thermal conductivity of composite materials with imperfect interfaces. composites science and technology 70, 2276-2283, 2010. DOI:

    • 2009

  • L. P. Canal, J. Segurado, J. LLorca - Failure surface of epoxy-modified fiber-reinforced composites under transverse tension and shear. international journal of solids and structures 49, 2265-2274, 2009. DOI:
  • E. Totry, C. González, J. LLorca, J. Molina-Aldareguía - Mechanisms of shear deformation in fiber-reinforced polymers: experiments and simulations. international journal of fracture 158, 197-209, 2009. DOI:

    • 2008

  • E. Totry, C. González, J. LLorca - Failure locus of fiber-reinforced composites under transverse compression and out-of-plane shear. composites science and technology 68, 829-839, 2008. DOI:
  • E. Totry, C. González, J. LLorca - Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics. composites science and technology 68, 3128-3136, 2008. DOI:
  • T. E. Wilkes, J. Y. Pastor, J. Llorca, K. T. Faber - Mechanical properties of wood-derived silicon carbide Aluminum-Silicon-Magnesium composites as a function of temperature. journal of materials research 23, 1732-1743, 2008. DOI:
  • E. Totry, C. González, J. LLorca - Influence of the loading path on the strength of fiber-reinforced composites subjected to transverse compression and shear. international journal of solids and structures 48, 1663-1675, 2008. DOI:

    • 2007

  • E. Arévalo, C. González, F. Gálvez, J. LLorca - Modelling low velocity impact in C/epoxy laminates. 23rd international symposium on ballistics 2, 1123-1132, 2007. DOI:
  • Gonzalez, Carlos; Llorca, Javier - Numerical simulation of the fracture behavior of Ti/SiC composites between 20 degrees C and 400 degrees C. metallurgical and materials transactions a -Physical Metallurgy And Materials Science 38A, 169-179, 2007. DOI: 10.1007/s11661-006-9014-4

Follow Us

Linkedin Twitter Youtube

About

© All rights reserved

© Fractales