The thesis was supervised by Prof. Javier LLorca and obtained the highest grade “Sobresaliente cum laude”. Congratulations to the new doctor from the Bio/Chemo/Mechanics of Materials group.
The thesis was supervised by Prof. Javier LLorca and Prof. Carlos González and obtained the highest grade “Sobresaliente cum laude”. Congratulations to the new doctor from the Bio/Chemo/Mechanics of Materials group.
The master thesis was carried out during the research initiation fellowship of Diego in the Bio/Chemo/Mechanics of Materials group and was supervised by Dr. Valentin Vassilev and Ms. Carmen Martínez. The thesis was graded with 10/10 by the committee.
Dr. Mahdi Sabbaghian will carry out the project MACS that aims at developing novel Magnesium alloys for bone tissue engineering manufactured by selective laser melting.
Wahaaj developed during his PhD thesis an innovative process to modify the surface of Mg wires by plasma electrolytic oxidation. The process increases corrosion resistance, minimizes pitting and improves biocompatibility of Mg wires for wire-based medical devices such as, stents,
The doctoral thesis of Wahaaj Ali entitled “Bioabsorbable composite laminates of PLA reinforced with surface-modified Mg wires for orthopedic implant applications” has obtained the Award to the Best Doctoral thesis in Materials Science and Engineering from the Carlos III University
Yuyao’s photo was entitled “Little Ghost on Halloween”. The president of the Spanish Royal Society of Chemistry, Prof. Ernesto de Jesus, gave the award to Yuyao.
Samuel Hémery is assistant professor at Institut Pprime and ISAE-ENSMA (Poitiers, France). His current research interests are focused in the analysis of mechanisms involved in deformation and fracture on Ti alloys for aerospace applications. During his visit to the Bio/Chemo·Mechanics
Prof. Shibutani is an expert in solid mechanics, in particular the defect theory of materials and plasticity from a multiscale view and nondestructive observation techniques. His presentation sought to address the challenge of modeling plastic deformation at various length scales,
The thesis was supervised by Prof. Javier LLorca and Prof. Carlos González and obtained the highest grade “Sobresaliente cum laude”. Congratulations to the new doctor from the Bio/Chemo/Mechanics of Materials group.
The thesis was supervised by Prof. Javier LLorca and Dr. Anxin Ma and obtained the highest grade “Sobresaliente cum laude”. Congratulations to the new doctor from the Bio/Chemo/Mechanics of Materials group.
Javier LLorca gave two keynote lectures at the Chinese Materials Conference in Shenzhen in the symposia devoted to “Materials Simulation, Computation, and Design” and “Magnesium alloys”. In addition, he visited the School of Materials Science and Engineering in Shanghai Jiao
The seminar was entitled “Research & Development of biodegradable Mg-based vascular stent”. Prof. G. Yuan is professor in the School of Materials Science and Engineering at Shanghai Jiao Tong University and also belongs to the National Engineering Research Center of
The first project (High-Throughput Discovery of New Catalysts for the Hydrogen Economy by Combining Ab Initio Calculations and Machine Learning) will use first principles calculations to determine the adsorption energy of H, O and OH on the surface of different
Carmen Martínez gave an invited talk at the EuroMech Colloquium on “Modulation of physico-chemical processes by elastic strain engineering” celebrated in Besançon (France), May 22nd-23rd, 2023. The Colloquium explored -from a multidisciplinary perspective- the potential of elastic strain engineering to
Wei Shao presented her First Year Assessment entitled “First principles prediction of Al-based binary phase diagrams” on April 21st and Biaobiao Yang presented his First Year Assessment entitled “Deformation mechanisms of dual-textured Mg-6.5Zn alloy with limited tension-compression yield asymmetry” on
Javier LLorca received the award at the 152nd Annual Meeting of the TMS in San Diego, California during the StructuralMaterials/Functional Materials Divisions Luncheon. This year’s award was presented to Prof. LLorca “for his contributions towards establishing processing-microstructure-property linkages in structural
Prof. Javier LLorca has given to scientific seminars in Warsaw on February 13th and 14th. They summarise several research activities in the areas of materials for health and multiscale materials modelling. The first one entitled “3D printed multimaterial bioabsorbable scaffolds
