Ainhoa Zapatero

    2023

  • Mocerino, D, Bruno, M, Monclus, MA, Gómez, DG, Rueda-Ruiz, M, Molina-Aldareguia, JM, Flores, M, González, C - Characterization of the interface in a fiber-reinforced polymer composite using a novel single-fiber microcantilever test. composites science and technology 242, 2023. DOI: DOI10.1016/j.compscitech.2023.110164
  • Ali, W, Echeverry-Rendon, M, Kopp, A, González, C, LLorca, J - Effect of surface modification on interfacial behaivor in bioabsorbable magnesium wire reinforced poly-lactic acid polymer composites. npj materials degradation 7, 2023. DOI: DOI10.1038/s41529-023-00386-x

    • 2022

  • Pascual-Gonzalez, C.; de la Vega, J.; Thompson, C.; Fernandez-Blazquez, J. P.; Herraez-Molinero, D.; Biurrun, N.; Lizarralde, I.; Sánchez del Río, J.; González, C.; LLorca, J. - Processing and mechanical properties of novel biodegradable poly-lactic acid/Zn 3D printed scaffolds for application in tissue regeneration. journal of the mechanical behavior of biomedical materials 132, 105290-105290, 2022. DOI: doi.org/10.1016/j.jmbbm.2022.105290
  • Ou, Yunfu; Rana, Moumita; Vilatela, Juan Jose; Gonzalez, Carlos - Assessment of stress transfer in laminated structural power composites produced with mechanically-connected electric double-layer capacitors. composites science and technology 218, 109128, 2022. DOI: 10.1016/j.compscitech.2021.109128
  • Lizarralde, I; Sapountzi, E.; Benethuiliere, T.; Sket, F.; Gonzalez, C. - An X-ray computed tomography analysis of damage induced by thermal cycling in non-crimp fabric composites. composites part a-applied science and manufacturing 152, 106699-106699, 2022. DOI: 10.1016/j.compositesa.2021.106699

    • 2021

  • Pascual-Gonzalez, C.; Thompson, C.; de la Vega, J.; Biurrun, N.; Fernandez-Blazquez, J. P.; Lizarralde, I.; Herráez-Molinero, D.; González, C.; LLorca, J. - Processing and properties of PLA/Mg filaments for 3D printing of scaffolds for biomedical applications. rapid prototyping journal , 2021. DOI: 10.1108/RPJ-06-2021-0152
  • Ali, Wahaaj; Echeverry-Rendon, Monica; Kopp, Alexander; Gonzalez, Carlos; LLorca, Javier - Strength, corrosion resistance and cellular response of interfaces in bioresorbable poly-lactic acid/Mg fiber composites for orthopedic applications. journal of the mechanical behavior of biomedical materials 123, 104781-104781, 2021. DOI: 10.1016/j.jmbbm.2021.104781
  • Castro, J.; Sket, F.; Helfen, L.; Gonzalez, C. - In situ local imaging and analysis of impregnation during liquid moulding of composite materials using synchrotron radiation computed laminography. composites science and technology 215, 108999-108999, 2021. DOI: 10.1016/j.compscitech.2021.108999
  • Pascual-González, C.; San Martín, P.; Lizarralde, A.; Fernández, A.; León, A.; Lopes, C.S.; Fernández-Blázquez, J.P. - Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites. composites part b: engineering 210, 221-108652, 2021. DOI: 10.1016/j.compositesb.2021.108652
  • Pascual-González, C.; San Martín, P.; Lizarralde, L.; Fernández, A.; León, A.; Lopes, C.S.; Fernández-Blázquez, J.P. - Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites. composites part b: engineering 210, 108652, 2021. DOI: 10.1016/j.compositesb.2021.108652
  • Sanchez del Río, J.; Pascual-González, C.; Martínez, V.; Jiménez, J.L.; González, C. - 3D-printed resistive carbon-fiber-reinforced sensors for monitoring the resin frontal flow during composite manufacturing. sensors and actuators a: physical 317, 112422, 2021. DOI: 10.1016/j.sna.2020.112422

    • 2020

  • González, C.; Fernández-León, J. - A Machine Learning Model to Detect Flow Disturbances during Manufacturing of Composites by Liquid Moulding. journal of composite science 4, 71, 2020. DOI: 10.3390/jcs4020071
  • Ou, Y.; González, C.; Vilatela, J.J. - Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils. composites part b-engineering 201, 108372, 2020. DOI: 10.1016/j.compositesb.2020.108372
  • Lilli, M.; Sarasini, F.; Di Fausto, L.; González, C.; Fernández, A.; Saúl-Lopes, C.; Tirillò, J. - Chemical Regeneration of Thermally Conditioned Basalt Fibres. applied science 10, 6674, 2020. DOI: 10.3390/app10196674
  • Lilli, M.; Ross, E.; Tirillò, J.; Sarasi, F.; Fausto, L.D.; Valente, T.; González, C.; Fernández, A.; Saúl, C.; Lopes, C.S.; Moscate, R.; Bemporad, E. Sebastiani, M. - Quantitative multi-scale characterization of single basalt fibres: Insights into strength loss mechanisms after thermal conditioning. materials science & engineering: a 797, 139963, 2020. DOI: 10.1016/j.msea.2020.139963
  • Castro, J; Sket, F; González, C. - S-XCT experimental determination of local contact angle and meniscus shape in liquid moulding of composites. 199, 108362, 2020. DOI: 10.1016/j.compscitech.2020.108362
  • Martinez-Hergueta, F.; Pellegrino, A.; Ridruejo, A.; Petrinic, N.; Gonzalez, C. ;Llorca, J. - Dynamic Tensile Testing of Needle-Punched Nonwoven Fabrics. applied science 10, 2020. DOI: 10.3390
  • Van der Giessen, E.; Schultz, P.A.; Bertin, N.; Bulatov, V.V.; Cai, W.; Csányi, G.; Foiles, S.M.; Geers, M.G.D.; González, C.; Hütter, M.; Kyun Kim, W.; Kochmann, D.M.; Llorca, J.; Mattsson, A.E.; Rottler, J.; Shluger, A.; Sills, R.B.; Steinbach, I.; Strachan, A.; Tadmor, E.B. - Roadmap on multiscale materials modeling. modelling and simulation in materials science and engineering 28, 043001, 2020. DOI: 10.1088
  • Herraez, M.; Bergan, A. C.; Lopes, C. S.; Gonzalez, C. - Computational micromechanics model for the analysis of fiber kinking in unidirectional fiber-reinforced polymers. mechanics of materials 142, 103299-103299, 2020. DOI: 10.1016/j.mechmat.2019.103299

    • 2019

  • Iragi, M.; Pascual-Gonzalez, C.; Esnaola, A.; Lopes, C. S.; Aretxabaleta, L. - Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure. additive manufacturing 30, 100884-100884, 2019. DOI: 10.1016/j.addma.2019.100884
  • Riezzo, MA; Simmons, M; Russell, B; Sket, F; Martinez, V; Gonzalez, C - Dynamic characterisation of interlaminar fracture toughness in carbon fibre epoxy composite laminates. composites part a-applied science and manufacturing 126, 2019. DOI: 10.1016/j.compositesa.2019.105597
  • Mugica, JI; Lopes, CS; Naya, F; Herraez, M; Martinez, V; Gonzalez, C - Multiscale modelling of thermoplastic woven fabric composites: From micromechanics to mesomechanics. composite structures 228, 2019. DOI: 10.1016/j.compstruct.2019.111340
  • Haldar, S; Herraez, M; Naya, F; Gonzalez, C; Lopes, CS - Relations between intralaminar micromechanisms and translaminar fracture behavior of unidirectional FRP supported by experimental micromechanics. composites part b-engineering 174, 2019. DOI: 10.1016/j.compositesb.2019.107000
  • Ou, YF; Gonzalez, C; Vilatela, JJ - Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils. composites part a-applied science and manufacturing 124, 2019. DOI: 10.1016/j.compositesa.2019.105477
  • Li, XC; Miyauchi, M; Gonzalez, C; Nutt, S - Thermal oxidation of PEPA-terminated polyimide. high performance polymers 31, 707-718, 2019. DOI: 10.1177/0954008318787852
  • Cernicharo, J; Gallego, JD; Lopez-Perez, JA; Tercero, F; Tanarro, I; Beltran, F; de Vicente, P; Lauwaet, K; Aleman, B; Moreno, E; Herrero, VJ; Domenech, JL; Ramirez, SI; Bermudez, C; Pelaez, RJ; Patino-Esteban, M; Lopez-Fernandez, I; Garcia-Alvaro, S; Garcia-Carreno, P; Cabezas, C; Malo, I; Amils, R; Sobrado, J; Diez-Gonzalez, C; Hernandez, JM; Tercero, B; Santoro, G; Martinez, L; Castellanos, M; Jimenez, BV; Pardo, JR; Barbas, L; Lopez-Fernandez, JA; Aja, B; Leuther, A; Martin-Gago, JA - Broad-band high-resolution rotational spectroscopy for laboratory astrophysics. astronomy & astrophysics 626, 2019. DOI: 10.1051/0004-6361/201935197
  • Torres, J. J.; Simmons, M.; Sket, F.; Gonzalez, C. - An analysis of void formation mechanisms in out-of-autoclave prepregs by means of X-ray computed tomography. composites part a-applied science and manufacturing 117, 230-242, 2019. DOI: 10.1016/j.compositesa.2018.11.010
  • Sadaba, S.; Herraez, M.; Naya, F.; Gonzalez, C.; Llorca, J.; Lopes, C.S. - Special-purpose elements to impose Periodic Boundary Conditions for multiscale computational homogenization of composite materials with the explicit Finite Element Method. composite structures 208, 434-441, 2019. DOI: 10.1016/j.compstruct.2018.10.037

    • 2018

  • Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - Ballistic performance of hybrid nonwoven/woven polyethylene fabric shields. international journal of impact engineering 111, 55-65, 2018. DOI: 10.1016/j.ijimpeng.2017.08.011
  • Herraez, M.; Gonzalez, C.; Lopes, C. S. - A numerical framework to analyze fracture in composite materials: From R-curves to homogenized softening laws. international journal of solids and structures 134, 216-228, 2018. DOI: 10.1016/j.ijsolstr.2017.10.031
  • Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J. - Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design (vol 91, pg 484, 2016). composites part a-applied science and manufacturing 112, 572-572, 2018. DOI: 10.1016/j.compositesa.2018.05.024
  • Senokos, Evgeny; Ou, Yunfu; Jose Torres, Juan; Sket, Federico; Gonzalez, Carlos; Marcilla, Rebeca; Vilatela, Juan J. - Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves. scientific reports 8, 2018. DOI: 10.1038/s41598-018-21829-5
  • Garcia-Carpintero, A.; van den Beuken, B. N. G.; Haldar, S.; Herraez, M.; Gonzalez, C.; Lopes, C. S. - Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach. engineering fracture mechanics 188, 268-286, 2018. DOI: 10.1016/j.engfracmech.2017.08.034
  • Tan, W.; Naya, F.; Yang, L.; Chang, T.; Falzon, B. G.; Zhan, L.; Molina-Aldareguia, J. M.; Gonzalez, C.; Llorca, J. - The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling. composites part b-engineering 138, 206-221, 2018. DOI: 10.1016/j.compositesb.2017.11.043

    • 2017

  • Lin, B. C.; Li, X.; Jain, Atul; Wu, M-S; Mier, R.; Herraez, M.; Gonzalez, C.; LLorca, J.; Nutt, S. R. - Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods. sampe journal 53, 32-39, 2017. DOI:
  • Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; Llorca, J. - Numerical simulation of the ballistic response of needle-punched nonwoven fabrics. international journal of solids and structures 106, 56-67, 2017. DOI: 10.1016/j.ijsolstr.2016.11.031
  • Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier - Fabric compaction and infiltration during vacuum-assisted resin infusion with and without distribution medium. journal of composite materials 51, 687-703, 2017. DOI: 10.1177/0021998316649783
  • Jin, Bo Cheng; Li, Xiaochen; Jain, Atul; Gonzalez, Carlos; LLorca, Javier; Nutt, Steven - Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg. composite structures 174, 389-398, 2017. DOI: 10.1016/j.compstruct.2017.05.002
  • Naya, F.; Molina-Aldareguia, J. M.; Lopes, C. S.; Gonzalez, C.; Llorca, J. - Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites. jom 69, 13-21, 2017. DOI: 10.1007/s11837-016-2128-2
  • Naya, F.; Herraez, M.; Lopes, C. S.; Gonzalez, C.; Van der Veen, S.; Pons, F. - Computational micromechanics of fiber kinking in unidirectional FRP under different environmental conditions. composites science and technology 144, 26-35, 2017. DOI: 10.1016/j.compscitech.2017.03.014
  • Valles, G.; Panizo-Laiz, M.; Gonzalez, C.; Martin-Bragado, I.; Gonzalez-Arrabal, R.; Gordillo, N.; Iglesias, R.; Guerrero, C. L.; Perlado, J. M.; Rivera, A. - Influence of grain boundaries on the radiation-induced defects and hydrogen in nanostructured and coarse-grained tungsten. acta materialia 122, 277-286, 2017. DOI: 10.1016/j.actamat.2016.10.007
  • Gonzalez, C.; Vilatela, J. J.; Molina-Aldareguia, J. M.; Lopes, C. S.; LLorca, J. - Structural composites for multifunctional applications: Current challenges and future trends. progress in materials science 89, 194-251, 2017. DOI: 10.1016/j.pmatsci.2017.04.005
  • Naya, F.; Gonzalez, C.; Lopes, C. S.; Van der Veen, S.; Pons, F. - Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects. composites part a-applied science and manufacturing 92, 146-157, 2017. DOI: 10.1016/j.compositesa.2016.06.018

    • 2016

  • Gonzalez, Carlos; Lopes, Claudio; LLorca, Javier; Wisnom, Michael R.; Pierron, Fabrice - CompTest 2015-Composites testing and model identification international conference, 8-10 April 2015 in Madrid, Spain. composites part a-applied science and manufacturing 91, 407-408, 2016. DOI: 10.1016/j.compositesa.2016.11.010
  • Sket, F.; Enfedaque, A.; Diaz Lopez, C.; Gonzalez, C.; Molina-Aldareguia, J.; LLorca, J. - X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear. composites science and technology 133, 40-50, 2016. DOI: 10.1016/j.compscitech.2016.06.012
  • Herraez, M.; Fernandez, A.; Lopes, C. S.; Gonzalez, C. - Strength and toughness of structural fibres for composite material reinforcement. philosophical transactions of the royal society a-mathematical physical and engineering sciences 374, 2016. DOI: 10.1098/rsta.2015.0274
  • Martinez-Hergueta, F.; Ridruejo, A.; Galvez, F.; Gonzalez, C.; LLorca, J. - Influence of fiber orientation on the ballistic performance of needlepunched nonwoven fabrics. mechanics of materials 94, 106-116, 2016. DOI: 10.1016/j.mechmat.2015.11.019
  • Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - A multiscale micromechanical model of needlepunched nonwoven fabrics. international journal of solids and structures 96, 81-91, 2016. DOI: 10.1016/j.ijsolstr.2016.06.020
  • Chen, Yinglong; Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier; Siegmund, Thomas - Notch effect in failure of fiberglass non-woven materials. international journal of solids and structures 96, 254-264, 2016. DOI: 10.1016/j.ijsolstr.2016.06.004
  • Jalalvand, Meisam; Czel, Gergely; Fuller, Jonathan D.; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier - Energy dissipation during delamination in composite materials – An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip. composites science and technology 134, 115-124, 2016. DOI: 10.1016/j.compscitech.2016.08.001
  • Fernandez-Toribio, Juan C.; Iniguez-Rabago, Agustin; Vila, Joaquim; Gonzalez, Carlos; Ridruejo, Alvaro; Jose Vilatela, Juan - A Composite Fabrication Sensor Based on Electrochemical Doping of Carbon Nanotube Yarns. advanced functional materials 26, 7139-7147, 2016. DOI: 10.1002/adfm.201602949
  • Medina M, Carlos; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Melendrez, Manuel F.; Flores, Paulo; LLorca, Javier - Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. journal of composite materials 50, 1651-1659, 2016. DOI: 10.1177/0021998315595115
  • Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J. - Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design. composites part a-applied science and manufacturing 91, 484-492, 2016. DOI: 10.1016/j.compositesa.2016.02.026
  • Lopes, C. S.; Sadaba, S.; Gonzalez, C.; Llorca, J.; Camanho, P. P. - Physically-sound simulation of low-velocity impact on fiber reinforced laminates. international journal of impact engineering 92, 3-17, 2016. DOI: 10.1016/j.ijimpeng.2015.05.014

    • 2015

  • Munoz, R.; Gonzalez, C.; Llorca, J. - Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites. journal of composite materials 49, 3755-3763, 2015. DOI: 10.1177/0021998314568333
  • Czel, Gergely; Jalalvand, Meisam; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier - Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law. engineering fracture mechanics 149, 326-337, 2015. DOI: 10.1016/j.engfracmech.2015.06.060
  • Valles, G.; Cazalilla, A. L.; Gonzalez, C.; Martin-Bragado, I.; Prada, A.; Iglesias, R.; Perlado, J. M.; Rivera, A. - A multiscale approach to defect evolution in tungsten under helium irradiation. nuclear instruments & methods in physics research section b-beam interactions with materials and atoms 352, 100-103, 2015. DOI: 10.1016/j.nimb.2014.12.034
  • Sadaba, Sergio; Romero, Ignacio; Gonzalez, Carlos; Llorca, Javier - A stable X-FEM in cohesive transition from closed to open crack. international journal for numerical methods in engineering 101, 540-570, 2015. DOI: 10.1002/nme.4809
  • Vila, Joaquim; Sket, Federico; Wilde, Fabian; Requena, Guillermo; Gonzalez, Carlos; LLorca, Javier - An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography. composites science and technology 119, 12-19, 2015. DOI: 10.1016/j.compscitech.2015.09.016
  • Munoz, R.; Martinez-Hergueta, F.; Galvez, F.; Gonzalez, C.; LLorca, J. - Ballistic performance of hybrid 3D woven composites: Experiments and simulations. composite structures 127, 141-151, 2015. DOI: 10.1016/j.compstruct.2015.03.021
  • Ridruejo, Alvaro; Jubera, Rafael; Gonzalez, Carlos; LLorca, Javier - Inverse notch sensitivity: Cracks can make nonwoven fabrics stronger. journal of the mechanics and physics of solids 77, 61-69, 2015. DOI: 10.1016/j.jmps.2015.01.004
  • Valles, G.; Gonzalez, C.; Martin-Bragado, I.; Iglesias, R.; Perlado, J. M.; Rivera, A. - The influence of high grain boundary density on helium retention in tungsten. journal of nuclear materials 457, 80-87, 2015. DOI: 10.1016/j.jnucmat.2014.10.038
  • Herraez, Miguel; Mora, Diego; Naya, Fernando; Lopes, Claudio S.; Gonzalez, Carlos; LLorca, Javier - Transverse cracking of cross-ply laminates: A computational micromechanics perspective. composites science and technology 110, 196-204, 2015. DOI: 10.1016/j.compscitech.2015.02.008
  • Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - Deformation and energy dissipation mechanisms of needle-punched nonwoven fabrics: A multiscale experimental analysis. international journal of solids and structures 64-65, 120-131, 2015. DOI: 10.1016/j.ijsolstr.2015.03.018

    • 2014

  • Martinez-Hergueta, Francisca; Galvez, Francisco; Gonzalez, Carlos - INFLUENCE OF THE FIBER ALIGNMENT IN THE BALLISTIC PERFORMANCE OF DYNEEMA NON-WOVEN FABRICS. 28th international symposium on ballistics, vols 1 and 2 , 931-941, 2014. DOI:
  • Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier - A level set approach for the analysis of flow and compaction during resin infusion in composite materials. composites part a-applied science and manufacturing 67, 299-307, 2014. DOI: 10.1016/j.compositesa.2014.09.002
  • Jubera, R.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate. mechanics of materials 74, 14-25, 2014. DOI: 10.1016/j.mechmat.2014.03.007
  • Munoz, R.; Martinez, V.; Sket, F.; Gonzalez, C.; LLorca, J. - Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension. composites part a-applied science and manufacturing 59, 93-104, 2014. DOI: 10.1016/j.compositesa.2014.01.003
  • Munoz, Raul; Delgado, Sofia; Gonzalez, Carlos; Lopez-Romano, Bernardo; Wang, De-Yi; LLorca, Javier - Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials. applied composite materials 21, 149-164, 2014. DOI: 10.1007/s10443-013-9377-9
  • Li, Cheng; Kang, Nian-Jun; Delgado Labrandero, Sofia; Wan, Jintao; Gonzalez, Carlos; Wane, De-Yi - Synergistic Effect of Carbon Nanotube and Polyethersulfone on Flame Retardancy of Carbon Fiber Reinforced Epoxy Composites. industrial & engineering chemistry research 53, 1040-1047, 2014. DOI: 10.1021/ie403378w
  • Vajari, Danial Ashouri; Gonzalez, Carlos; Llorca, Javier; Legarth, Brian Nyvang - A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. composites science and technology 97, 46-54, 2014. DOI: 10.1016/j.compscitech.2014.04.004
  • Sket, F.; Enfedaque, A.; Alton, C.; Gonzalez, C.; Molina-Aldareguia, J. M.; Llorca, J. - Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates. composites science and technology 90, 129-138, 2014. DOI: 10.1016/j.compscitech.2013.10.022

    • 2013

  • Llorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Lopes, C. S. - Multiscale Modeling of Composites: Toward Virtual Testing … and Beyond. jom 65, 215-225, 2013. DOI: 10.1007/s11837-012-0509-8
  • Hernandez, S.; Sket, F.; Gonzalez, C.; LLorca, J. - Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties. composites science and technology 85, 73-82, 2013. DOI: 10.1016/j.compscitech.2013.06.005
  • Seltzer, R.; Gonzalez, C.; Munoz, R.; LLorca, J.; Blanco-Varela, T. - X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact. composites part a-applied science and manufacturing 45, 49-60, 2013. DOI: 10.1016/j.compositesa.2012.09.017

    • 2012

  • Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - DAMAGE LOCALIZATION AND FAILURE LOCUS UNDER BIAXIAL LOADING IN GLASS-FIBER NONWOVEN FELTS. international journal for multiscale computational engineering 10, 425-440, 2012. DOI: 10.1615/IntJMultCompEng.2012002922
  • Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier - Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation. comptes rendus mecanique 340, 307-319, 2012. DOI: 10.1016/j.crme.2012.02.013
  • Lorenzo-Villafranca, Eduardo; Tamargo-Martinez, Katia; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Martinez-Alonso, Amelia; Tascon, Juan M. D.; Gracia, Mercedes; Llorca, Javier - Influence of Plasma Surface Treatments on Kink Band Formation in PBO Fibers During Compression. journal of applied polymer science 123, 2052-2063, 2012. DOI: 10.1002/app.34568
  • Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - A constitutive model for the in-plane mechanical behavior of nonwoven fabrics. international journal of solids and structures 49, 2215-2229, 2012. DOI: 10.1016/j.ijsolstr.2012.04.014
  • Sket, F.; Seltzer, R.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography. composites science and technology 72, 350-359, 2012. DOI: 10.1016/j.compscitech.2011.11.025
  • Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Determination of the mechanical properties of amorphous materials through instrumented nanoindentation. acta materialia 60, 3953-3964, 2012. DOI: 10.1016/j.actamat.2012.03.027
  • Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - A methodology to measure the interface shear strength by means of the fiber push-in test. composites science and technology 72, 1924-1932, 2012. DOI: 10.1016/j.compscitech.2012.08.011
  • Canal, L. P.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; LLorca, J. - Application of digital image correlation at the microscale in fiber-reinforced composites. composites part a-applied science and manufacturing 43, 1630-1638, 2012. DOI: 10.1016/j.compositesa.2011.07.014
  • Pablo Canal, Luis; Gonzalez, Carlos; Segurado, Javier; LLorca, Javier - Intraply fracture of fiber-reinforced composites: Microscopic mechanisms and modeling. composites science and technology 72, 1223-1232, 2012. DOI: 10.1016/j.compscitech.2012.04.008

    • 2011

  • LLorca, Javier; Gonzalez, Carlos - VIRTUAL MECHANICAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS. proceedings of the 1st world congress on integrated computational materials engineering (icme) , 121-127, 2011. DOI:
  • Molina-Aldareguia, Jon M.; Rodriguez, M.; Gonzalez, C.; LLorca, J. - An experimental and numerical study of the influence of local effects on the application of the fibre push-in test. philosophical magazine 91, 1293-1307, 2011. DOI: 10.1080/14786435.2010.480947
  • Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics. international journal of solids and structures 48, 153-162, 2011. DOI: 10.1016/j.ijsolstr.2010.09.013
  • Hernandez, S.; Sket, F.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites. composites science and technology 71, 1331-1341, 2011. DOI: 10.1016/j.compscitech.2011.05.002
  • LLorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; Seltzer, R.; Sket, F.; Rodriguez, M.; Sadaba, S.; Munoz, R.; Canal, L. P. - Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing. advanced materials 23, 5130-5147, 2011. DOI: 10.1002/adma.201101683

    • 2010

  • Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: An experimental and numerical study. journal of the mechanics and physics of solids 58, 1628-1645, 2010. DOI: 10.1016/j.jmps.2010.07.005
  • Enfedaque, A.; Molina-Aldareguia, J. M.; Galvez, F.; Gonzalez, C.; Llorca, J. - Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates. journal of composite materials 44, 3051-3068, 2010. DOI: 10.1177/0021998310369602
  • Totry, Essam; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; LLorca, Javier - Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites. composites science and technology 70, 970-980, 2010. DOI: 10.1016/j.compscitech.2010.02.014

    • 2009

  • Presas, M.; Pastor, J. Y.; LLorca, J.; Martin, A.; Segurado, J.; Gonzalez, C. - Strength and toughness of cellular SiC at elevated temperature. engineering failure analysis 16, 2598-2603, 2009. DOI: 10.1016/j.engfailanal.2009.04.029

    • 2008

  • Totry, Essam; Gonzalez, Carlos; LLorca, Javier - Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics. composites science and technology 68, 3128-3136, 2008. DOI: 10.1016/j.compscitech.2008.07.011

    • 2007

  • Gonzalez, Carlos; Llorca, Javier - Numerical simulation of the fracture behavior of Ti/SiC composites between 20 degrees C and 400 degrees C. metallurgical and materials transactions a-physical metallurgy and materials science 38A, 169-179, 2007. DOI: 10.1007/s11661-006-9014-4

    • 317

  • del Río, J.S.; Pascual-González, C.; Martínez, V.; Jiménez, J.L.; González, C. - 3D-printed resistive carbon-fiber-reinforced sensors for monitoring the resin frontal flow during composite manufacturing. sensors and actuators a: physical 317, 112422, 317. DOI: 10.1016/j.sna.2020.112422

Follow Us

Linkedin-in Icon-twitter-x Youtube Instagram Facebook-f Flickr Spotify

Contact us

Phone: (+34) 91 549 34 22
Email: contact.materials@imdea.org

Location

C/ Eric Kandel, 2
Tecnogetafe
28906, Getafe, Madrid (Spain)

HOW TO ARRIVE

© All rights reserved

Privacy policy | Accesibility | Disclaimer | Ethics Channel

© Fractales