Publication – Page 2

2016

Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - A multiscale micromechanical model of needlepunched nonwoven fabrics. international journal of solids and structures 96, 81-91, 2016. DOI: 10.1016/j.ijsolstr.2016.06.020
Chen, Yinglong; Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier; Siegmund, Thomas - Notch effect in failure of fiberglass non-woven materials. international journal of solids and structures 96, 254-264, 2016. DOI: 10.1016/j.ijsolstr.2016.06.004
Pushkareva, Marina; Adrien, Jerome; Maire, Eric; Segurado, Javier; Llorca, Javier; Weck, Arnaud - Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium. materials science and engineering a-structural materials properties microstructure and processing 671, 221-232, 2016. DOI: 10.1016/j.msea.2016.06.053
Martinez-Hergueta, F.; Ridruejo, A.; Galvez, F.; Gonzalez, C.; LLorca, J. - Influence of fiber orientation on the ballistic performance of needlepunched nonwoven fabrics. mechanics of materials 94, 106-116, 2016. DOI: 10.1016/j.mechmat.2015.11.019
Yang, L. W.; Mayer, C.; Chawla, N.; Llorca, J.; Molina-Aldareguia, J. M. - Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature. philosophical magazine 96, 3336-3355, 2016. DOI: 10.1080/14786435.2016.1219075
Jalalvand, Meisam; Czel, Gergely; Fuller, Jonathan D.; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier - Energy dissipation during delamination in composite materials – An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip. composites science and technology 134, 115-124, 2016. DOI: 10.1016/j.compscitech.2016.08.001
Mayer, C.; Yang, L. W.; Singh, S. S.; Xie, H.; Shen, Y. -L.; Llorca, J.; Molina-Aldareguia, J.; Chawla, N. - Orientation dependence of indentation behavior in Al-SiC nanolaminate composites. materials letters 168, 129-133, 2016. DOI: 10.1016/j.matlet.2016.01.049
Zhao, Xiaomin; de Juan, Sergio; Reyes Guerrero, Francisco; Li, Zhi; Llorca, Javier; Wang, De-Yi - Effect of N,N ‘-diallyl-phenylphosphoricdiamide on ease of ignition, thermal decomposition behavior and mechanical properties of poly (lactic acid). polymer degradation and stability 127, 2-10, 2016. DOI: 10.1016/j.polymdegradstab.2016.01.014
Medina M, Carlos; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Melendrez, Manuel F.; Flores, Paulo; LLorca, Javier - Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. journal of composite materials 50, 1651-1659, 2016. DOI: 10.1177/0021998315595115
Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J. - Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design. composites part a-applied science and manufacturing 91, 484-492, 2016. DOI: 10.1016/j.compositesa.2016.02.026
Mayer, C. R.; Yang, L. W.; Singh, S. S.; Llorca, J.; Molina-Aldareguia, J. M.; Shen, Y. L.; Chawla, N. - Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites. acta materialia 114, 25-32, 2016. DOI: 10.1016/j.actamat.2016.05.018
Lopes, C. S.; Sadaba, S.; Gonzalez, C.; Llorca, J.; Camanho, P. P. - Physically-sound simulation of low-velocity impact on fiber reinforced laminates. international journal of impact engineering 92, 3-17, 2016. DOI: 10.1016/j.ijimpeng.2015.05.014
Zhao, Xiaomin; Babu, Heeralal Vignesh; Llorca, Javier; Wang, De-Yi - Impact of halogen-free flame retardant with varied phosphorus chemical surrounding on the properties of diglycidyl ether of bisphenol-A type epoxy resin: synthesis, fire behaviour, flame-retardant mechanism and mechanical properties. rsc advances 6, 59226-59236, 2016. DOI: 10.1039/c6ra13168a

2015

Munoz, R.; Gonzalez, C.; Llorca, J. - Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites. journal of composite materials 49, 3755-3763, 2015. DOI: 10.1177/0021998314568333
Czel, Gergely; Jalalvand, Meisam; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier - Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law. engineering fracture mechanics 149, 326-337, 2015. DOI: 10.1016/j.engfracmech.2015.06.060
Sket, F.; Rodriguez-Hortala, M.; Molina-Aldareguia, J. M.; Llorca, J.; Maire, E.; Requena, G. - In situ tomographic investigation of damage development in +/- 45 degrees carbon fibre reinforced laminates. materials science and technology 31, 587-593, 2015. DOI: 10.1179/1743284714Y.0000000561
Herrera-Solaz, V.; Segurado, J.; LLorca, J. - On the robustness of an inverse optimization approach based on the Levenberg-Marquardt method for the mechanical behavior of polycrystals. european journal of mechanics a-solids 53, 220-228, 2015. DOI: 10.1016/j.euromechsol.2015.05.005
Yue, Hangbo; Monreal-Bernal, Alfonso; Fernandez-Blazquez, Juan P.; Llorca, Javier; Vilatela, Juan J. - Macroscopic CNT fibres inducing non-epitaxial nucleation and orientation of semicrystalline polymers. scientific reports 5, 2015. DOI: 10.1038/srep16729
Sadaba, Sergio; Romero, Ignacio; Gonzalez, Carlos; Llorca, Javier - A stable X-FEM in cohesive transition from closed to open crack. international journal for numerical methods in engineering 101, 540-570, 2015. DOI: 10.1002/nme.4809
Vila, Joaquim; Sket, Federico; Wilde, Fabian; Requena, Guillermo; Gonzalez, Carlos; LLorca, Javier - An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography. composites science and technology 119, 12-19, 2015. DOI: 10.1016/j.compscitech.2015.09.016
Munoz, R.; Martinez-Hergueta, F.; Galvez, F.; Gonzalez, C.; LLorca, J. - Ballistic performance of hybrid 3D woven composites: Experiments and simulations. composite structures 127, 141-151, 2015. DOI: 10.1016/j.compstruct.2015.03.021
Ridruejo, Alvaro; Jubera, Rafael; Gonzalez, Carlos; LLorca, Javier - Inverse notch sensitivity: Cracks can make nonwoven fabrics stronger. journal of the mechanics and physics of solids 77, 61-69, 2015. DOI: 10.1016/j.jmps.2015.01.004
Hidalgo-Manrique, P.; Herrera-Solaz, V.; Segurado, J.; Llorca, J.; Galvez, F.; Ruano, O. A.; Yi, S. B.; Perez-Prado, M. T. - Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature. acta materialia 92, 265-277, 2015. DOI: 10.1016/j.actamat.2015.03.053
Herraez, Miguel; Mora, Diego; Naya, Fernando; Lopes, Claudio S.; Gonzalez, Carlos; LLorca, Javier - Transverse cracking of cross-ply laminates: A computational micromechanics perspective. composites science and technology 110, 196-204, 2015. DOI: 10.1016/j.compscitech.2015.02.008
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - Deformation and energy dissipation mechanisms of needle-punched nonwoven fabrics: A multiscale experimental analysis. international journal of solids and structures 64-65, 120-131, 2015. DOI: 10.1016/j.ijsolstr.2015.03.018
Chang, Hyung-Jun; Segurado, Javier; LLorca, Javier - Three-dimensional dislocation dynamics analysis of size effects on void growth. scripta materialia 95, 11-14, 2015. DOI: 10.1016/j.scriptamat.2014.09.018

2014

Perez-Prado, M. T.; LLorca, J.; Boehlert, C. J. - Processing-Microstructure-Property Relationships & Deformation Mechanisms of Magnesium Alloys Foreword. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 3195-3196, 2014. DOI: 10.1007/s11661-013-2183-z
Cruzado, A.; Gan, B.; Chang, H.; Ostolaza, K.; Linaza, A.; Milenkovic, S.; Molina-Aldareguia, J. M.; Llorca, J.; Segurado, J. - MICROTESTING AND CRYSTAL PLASTICITY MODELLING OF IN718 SUPERALLOY GRAINS. 8th international symposium on superalloy 718 and derivatives , 897-907, 2014. DOI: 10.1002/9781119016854.ch71
Solanas, Concepcion; Herrero, Sara; Dasari, Aravind; Plaza, Gustavo R.; Llorca, Javier; Perez-Rigueiro, Jose; Elices, Manuel; Guinea, Gustavo V. - Insights into the production and characterization of electrospun fibers from regenerated silk fibroin. european polymer journal 60, 123-134, 2014. DOI: 10.1016/j.eurpolymj.2014.08.030
Munoz-Moreno, R.; Ruiz-Navas, E. M.; Boehlert, C. J.; Llorca, J.; Torralba, J. M.; Perez-Prado, M. T. - Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at%)-0.8 vol%TiB2 alloy by high temperature in situ mechanical testing. materials science and engineering a-structural materials properties microstructure and processing 606, 276-289, 2014. DOI: 10.1016/j.msea.2014.03.078
Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier - A level set approach for the analysis of flow and compaction during resin infusion in composite materials. composites part a-applied science and manufacturing 67, 299-307, 2014. DOI: 10.1016/j.compositesa.2014.09.002
Jubera, R.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate. mechanics of materials 74, 14-25, 2014. DOI: 10.1016/j.mechmat.2014.03.007
Munoz, R.; Martinez, V.; Sket, F.; Gonzalez, C.; LLorca, J. - Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension. composites part a-applied science and manufacturing 59, 93-104, 2014. DOI: 10.1016/j.compositesa.2014.01.003
Lotfian, S.; Mayer, C.; Chawla, N.; Llorca, J.; Misra, A.; Baldwin, J. K.; Molina-Aldareguia, J. M. - Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates. thin solid films 571, 260-267, 2014. DOI: 10.1016/j.tsf.2014.06.022
Soler, Rafael; Wheeler, Jeffrey M.; Chang, Hyung-Jun; Segurado, Javier; Michler, Johann; Llorca, Javier; Molina-Aldareguia, Jon M. - Understanding size effects on the strength of single crystals through high-temperature micropillar compression. acta materialia 81, 50-57, 2014. DOI: 10.1016/j.actamat.2014.08.007
Monclus, M. A.; Karlik, M.; Callisti, M.; Frutos, E.; LLorca, J.; Polcar, T.; Molina-Aldareguia, J. M. - Microstructure and mechanical properties of physical vapor deposited Cu/W nanoscale multilayers: Influence of layer thickness and temperature. thin solid films 571, 275-282, 2014. DOI: 10.1016/j.tsf.2014.05.044
Munoz, Raul; Delgado, Sofia; Gonzalez, Carlos; Lopez-Romano, Bernardo; Wang, De-Yi; LLorca, Javier - Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials. applied composite materials 21, 149-164, 2014. DOI: 10.1007/s10443-013-9377-9
Vajari, Danial Ashouri; Gonzalez, Carlos; Llorca, Javier; Legarth, Brian Nyvang - A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. composites science and technology 97, 46-54, 2014. DOI: 10.1016/j.compscitech.2014.04.004
Herrera-Solaz, V.; Hidalgo-Manrique, R.; Perez-Prado, M. T.; Letzig, D.; Llorca, J.; Segurado, J. - Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys. materials letters 128, 199-203, 2014. DOI: 10.1016/j.matlet.2014.04.144
Mesa, M. C.; Oliete, P. B.; Pastor, J. Y.; Martin, A.; LLorca, J. - Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method. journal of the european ceramic society 34, 2081-2087, 2014. DOI: 10.1016/j.jeurceramsoc.2013.11.013
Sket, F.; Enfedaque, A.; Alton, C.; Gonzalez, C.; Molina-Aldareguia, J. M.; Llorca, J. - Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates. composites science and technology 90, 129-138, 2014. DOI: 10.1016/j.compscitech.2013.10.022
Herrera-Solaz, V.; LLorca, J.; Dogan, E.; Karaman, I.; Segurado, J. - An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy. international journal of plasticity 57, 1-15, 2014. DOI: 10.1016/j.ijplas.2014.02.001
Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Bohlen, J.; Gutierrez-Urrutia, I.; Llorca, J.; Molina-Aldareguia, J. M. - Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation. acta materialia 71, 283-292, 2014. DOI: 10.1016/j.actamat.2014.03.014

2013

Boehlert, Carl; Chen, Zhe; Gutierrez-Urrutia, Ivan; Llorca, Javier; Perez-Prado, Maria Teresa - On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31. superplasticity in advanced materials 735, 22-26, 2013. DOI: 10.4028/www.scientific.net/MSF.735.22
Munoz-Moreno, Rocio; Teresa Perez-Prado, M.; Llorca, Javier; Maria Ruiz-Navas, Elisa; Boehlert, Carl J. - Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 1887-1896, 2013. DOI: 10.1007/s11661-012-1515-8
Ygnacio Pastor, Jose; Martin, Antonia; Molina-Aldareguia, Jon M.; LLorca, Javier; Oliete, Patricia B.; Larrea, Angel; Pena, Jose I.; Orera, Victor M.; Arenal, Raul - Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics. journal of the european ceramic society 33, 2579-2586, 2013. DOI: 10.1016/j.jeurceramsoc.2013.03.033
Llorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Lopes, C. S. - Multiscale Modeling of Composites: Toward Virtual Testing … and Beyond. jom 65, 215-225, 2013. DOI: 10.1007/s11837-012-0509-8
Boehlert, C. J.; Chen, Z.; Chakkedath, A.; Gutierrez-Urrutia, I.; Llorca, J.; Bohlen, J.; Yi, S.; Letzig, D.; Perez-Prado, M. T. - In situ analysis of the tensile deformation mechanisms in extruded Mg-1Mn-1Nd (wt%). philosophical magazine 93, 598-617, 2013. DOI: 10.1080/14786435.2012.725954
Bardella, Lorenzo; Segurado, Javier; Panteghini, Andrea; Llorca, Javier - Latent hardening size effect in small-scale plasticity. modelling and simulation in materials science and engineering 21, 2013. DOI: 10.1088/0965-0393/21/5/055009
Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N. - Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation. journal of electronic materials 42, 1085-1091, 2013. DOI: 10.1007/s11664-013-2517-z
Segurado, Javier; Llorca, Javier - Simulation of the deformation of polycrystalline nanostructured Ti by computational homogenization. computational materials science 76, 3-11, 2013. DOI: 10.1016/j.commatsci.2013.03.008
Monclus, M. A.; Zheng, S. J.; Mayeur, J. R.; Beyerlein, I. J.; Mara, N. A.; Polcar, T.; Llorca, J.; Molina-Aldareguia, J. M. - Optimum high temperature strength of two-dimensional nanocomposites. apl materials 1, 2013. DOI: 10.1063/1.4828757
Seltzer, R.; Gonzalez, C.; Munoz, R.; LLorca, J.; Blanco-Varela, T. - X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact. composites part a-applied science and manufacturing 45, 49-60, 2013. DOI: 10.1016/j.compositesa.2012.09.017
Hernandez, S.; Sket, F.; Gonzalez, C.; LLorca, J. - Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties. composites science and technology 85, 73-82, 2013. DOI: 10.1016/j.compscitech.2013.06.005
Lotfian, S.; Rodriguez, M.; Yazzie, K. E.; Chawla, N.; Llorca, J.; Molina-Aldareguia, J. M. - High temperature micropillar compression of Al/SiC nanolaminates. acta materialia 61, 4439-4451, 2013. DOI: 10.1016/j.actamat.2013.04.013

2012

Chen, Z.; Boehlert, C.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T. - TENSILE AND CREEP DEFORMATION MECHANISMS IN ROLLED AZ31. magnesium technology 2012 , 99-104, 2012. DOI: 10.1007/978-3-319-48203-3_19
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - DAMAGE LOCALIZATION AND FAILURE LOCUS UNDER BIAXIAL LOADING IN GLASS-FIBER NONWOVEN FELTS. international journal for multiscale computational engineering 10, 425-440, 2012. DOI: 10.1615/IntJMultCompEng.2012002922
Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier - Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation. comptes rendus mecanique 340, 307-319, 2012. DOI: 10.1016/j.crme.2012.02.013
Lorenzo-Villafranca, Eduardo; Tamargo-Martinez, Katia; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Martinez-Alonso, Amelia; Tascon, Juan M. D.; Gracia, Mercedes; Llorca, Javier - Influence of Plasma Surface Treatments on Kink Band Formation in PBO Fibers During Compression. journal of applied polymer science 123, 2052-2063, 2012. DOI: 10.1002/app.34568
Munoz-Moreno, Rocio; Boehlert, Carl J.; Teresa Perez-Prado, M.; Ruiz-Navas, Elisa M.; Llorca, Javier - In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn+0.8 vol pct TiB2. metallurgical and materials transactions a-physical metallurgy and materials science 43A, 1198-1208, 2012. DOI: 10.1007/s11661-011-1022-3
Soler, Rafael; Mikel Molina-Aldareguia, Jon; Segurado, Javier; LLorca, Javier - Effect of Misorientation on the Compression of Highly Anisotropic Single-Crystal Micropillars. advanced engineering materials 14, 1004-1008, 2012. DOI: 10.1002/adem.201200019
Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N. - High-temperature nanoindentation behavior of Al/SiC multilayers. philosophical magazine letters 92, 362-367, 2012. DOI: 10.1080/09500839.2012.674220
Milenkovic, Srdjan; Sabirov, Ilchat; LLorca, Javier - Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy. materials letters 73, 216-219, 2012. DOI: 10.1016/j.matlet.2012.01.028
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - A constitutive model for the in-plane mechanical behavior of nonwoven fabrics. international journal of solids and structures 49, 2215-2229, 2012. DOI: 10.1016/j.ijsolstr.2012.04.014
Sket, F.; Seltzer, R.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography. composites science and technology 72, 350-359, 2012. DOI: 10.1016/j.compscitech.2011.11.025
Williams, J. J.; Segurado, J.; LLorca, J.; Chawla, N. - Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites. materials science and engineering a-structural materials properties microstructure and processing 557, 113-118, 2012. DOI: 10.1016/j.msea.2012.05.108
Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Determination of the mechanical properties of amorphous materials through instrumented nanoindentation. acta materialia 60, 3953-3964, 2012. DOI: 10.1016/j.actamat.2012.03.027
Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - A methodology to measure the interface shear strength by means of the fiber push-in test. composites science and technology 72, 1924-1932, 2012. DOI: 10.1016/j.compscitech.2012.08.011
Canal, L. P.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; LLorca, J. - Application of digital image correlation at the microscale in fiber-reinforced composites. composites part a-applied science and manufacturing 43, 1630-1638, 2012. DOI: 10.1016/j.compositesa.2011.07.014
Soler, R.; Molina-Aldareguia, J. M.; Segurado, J.; Llorca, J.; Merino, R. I.; Orera, V. M. - Micropillar compression of LiF [111] single crystals: Effect of size, ion irradiation and misorientation. international journal of plasticity 36, 50-63, 2012. DOI: 10.1016/j.ijplas.2012.03.005
Pablo Canal, Luis; Gonzalez, Carlos; Segurado, Javier; LLorca, Javier - Intraply fracture of fiber-reinforced composites: Microscopic mechanisms and modeling. composites science and technology 72, 1223-1232, 2012. DOI: 10.1016/j.compscitech.2012.04.008
Boehlert, C. J.; Chen, Z.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T. - In situ analysis of the tensile and tensile-creep deformation mechanisms in rolled AZ31. acta materialia 60, 1889-1904, 2012. DOI: 10.1016/j.actamat.2011.10.025

2011

Ramirez-Rico, Joaquin; Martinez-Fernandez, Julian; Llorca, Javier; Orera, Victor M.; Sayir, Ali - Directionally Solidified Eutectic and Advanced Ceramics Preface. journal of the european ceramic society 31, 1189-1190, 2011. DOI: 10.1016/S0955-2219(11)00127-0
LLorca, J. - ADVANCES AND CHALLENGES IN THE COMPUTATIONAL SIMULATION OF COMPOSITES. composite materials for structural performance: towards higher limits , 45-57, 2011. DOI:
LLorca, Javier; Gonzalez, Carlos - VIRTUAL MECHANICAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS. proceedings of the 1st world congress on integrated computational materials engineering (icme) , 121-127, 2011. DOI:
Aguirre, M. V.; Martin, A.; Pastor, J. Y.; LLorca, J.; Monge, M. A.; Pareja, R. - Mechanical properties of tungsten alloys with Y2O3 and titanium additions. journal of nuclear materials 417, 516-519, 2011. DOI: 10.1016/j.jnucmat.2010.12.120
Molina-Aldareguia, Jon M.; Rodriguez, M.; Gonzalez, C.; LLorca, J. - An experimental and numerical study of the influence of local effects on the application of the fibre push-in test. philosophical magazine 91, 1293-1307, 2011. DOI: 10.1080/14786435.2010.480947
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics. international journal of solids and structures 48, 153-162, 2011. DOI: 10.1016/j.ijsolstr.2010.09.013
Hernandez, S.; Sket, F.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites. composites science and technology 71, 1331-1341, 2011. DOI: 10.1016/j.compscitech.2011.05.002
LLorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; Seltzer, R.; Sket, F.; Rodriguez, M.; Sadaba, S.; Munoz, R.; Canal, L. P. - Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing. advanced materials 23, 5130-5147, 2011. DOI: 10.1002/adma.201101683

2010

Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: An experimental and numerical study. journal of the mechanics and physics of solids 58, 1628-1645, 2010. DOI: 10.1016/j.jmps.2010.07.005
Enfedaque, A.; Molina-Aldareguia, J. M.; Galvez, F.; Gonzalez, C.; Llorca, J. - Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates. journal of composite materials 44, 3051-3068, 2010. DOI: 10.1177/0021998310369602
Aguirre, M. V.; Martin, A.; Pastor, J. Y.; Llorca, J.; Monge, M. A.; Pareja, R. - Mechanical properties of Y2O3-doped W-Ti alloys. journal of nuclear materials 404, 203-209, 2010. DOI: 10.1016/j.jnucmat.2010.07.016
Totry, Essam; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; LLorca, Javier - Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites. composites science and technology 70, 970-980, 2010. DOI: 10.1016/j.compscitech.2010.02.014

2009

LLorca, Javier; Cox, Brian N. - Virtual fracture testing of composite materials and structures. international journal of fracture 158, 97-97, 2009. DOI: 10.1007/s10704-009-9383-y
Presas, M.; Pastor, J. Y.; LLorca, J.; Martin, A.; Segurado, J.; Gonzalez, C. - Strength and toughness of cellular SiC at elevated temperature. engineering failure analysis 16, 2598-2603, 2009. DOI: 10.1016/j.engfailanal.2009.04.029
Moraleda, Joaquin; Segurado, Javier; Llorca, Javier - Effect of interface fracture on the tensile deformation of fiber-reinforced elastomers. international journal of solids and structures 46, 4287-4297, 2009. DOI: 10.1016/j.ijsolstr.2009.08.020

2008

Romero, Ignacio; Segurado, Javier; LLorca, Javier - Dislocation dynamics in non-convex domains using finite elements with embedded discontinuities. modelling and simulation in materials science and engineering 16, 2008. DOI: 10.1088/0965-0393/16/3/035008
Ester, Francisco J.; Merino, Rosa I.; Pastor, Jose Y.; Martin, Antonia; Llorca, Javier - Surface Modification of Al(2)O(3)-ZrO(2)(Y(2)O(3)) Eutectic Oxides by Laser Melting: Processing and Wear Resistance. journal of the american ceramic society 91, 3552-3559, 2008. DOI: 10.1111/j.1551-2916.2008.02728.x
Totry, Essam; Gonzalez, Carlos; LLorca, Javier - Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics. composites science and technology 68, 3128-3136, 2008. DOI: 10.1016/j.compscitech.2008.07.011

2007

Weck, Arnaud; Segurado, Javier; LLorca, Javier; Wilkinson, David; Boehm, Helmut - Numerical simulations of void linkage in model materials using a nonlocal ductile damage approximation. international journal of fracture 148, 205-219, 2007. DOI: 10.1007/s10704-008-9195-5
Gonzalez, Carlos; Llorca, Javier - Numerical simulation of the fracture behavior of Ti/SiC composites between 20 degrees C and 400 degrees C. metallurgical and materials transactions a-physical metallurgy and materials science 38A, 169-179, 2007. DOI: 10.1007/s11661-006-9014-4