Andrew Johnston

    2023

  • S. Banait; M. Campos; M.T. Pérez-Prado - Dynamic strain aging in Inconel718 additively manufactured lattices. materials letters 353, 2023. DOI: doi.org/10.1016/j.matlet.2023.135314
  • Salmenjoki, H, Papanikolaou, S, Shi, D, Tourret, D, Cepeda-Jiménez, CM, Pérez-Prado, MT, Laurson, L, Alava, MJ - Machine learning dislocation density correlations and solute effects in Mg-based alloys. scientific reports 13, 2023. DOI: DOI10.1038/s41598-023-37633-9
  • X.Z. Jin, C.Y. Wang, S. Milenkovic, I. Sabirov, I.J. Beyerlein, M.T. Pérez-Prado - Twin suppression by atomic scale engineering of precipitate-matrix interfaces. acta materialia 248, 118797-118797, 2023. DOI: 10.1016/j.actamat.2023.118797
  • X.Z. Jin, W.C. Xu, D.B. Shan, B. Guo, B. Jin, M.T. Pérez-Prado - A quantitive microplasticity-based approach to rationalize the poor strengthening response of polycrystalline Mg alloys. journal of magnesium and alloys 11, 1656-1671, 2023. DOI: https://doi.org/10.1016/j.jma.2021.08.036
  • S. Bafaluy Ojea; J. Torrents-Barrena. J. Torrents-Barrena, MT. Pérez-Prado, R. Muñoz Moreno; Sket. F - Binder jet green parts microstructure: advanced quantitative analysis. journal of materials research and technology 23, 3974-3986, 2023. DOI: DOI10.1016/j.jmrt.2023.02.051

    • 2022

  • C. Galera-Rueda, X. Jin, J.Llorca, M. T. Pérez-Prado - Icosahedral quasicrystal enhanced nucleation in commercially pure Ni processed by selective laser melting. scripta materialia 211, 114512-114512, 2022. DOI: 10.1016/j.scriptamat.2022.114512
  • Lena Thorsson, Mattias Unosson, María Teresa Pérez-Prado, Xueze Jin, Paola Tiberto, Gabriele Barrera, Bastian Adam, Nico Neuber, Amirhossein Ghavimi, Maximilian Frey, Ralf Busch, Isabella Gallino - Selective laser melting of a Fe-Si-Cr-B-C-based complex-shaped amorphous soft-magnetic electric motor rotor with record dimensions. materials & design 215, 110483-110483, 2022. DOI: 10.1016/j.matdes.2022.110483
  • Shi, D. F.; Cepeda-Jimenez, C. M.; Perez-Prado, M. T. - The relation between ductility at high temperature and solid solution in Mg alloys. journal of magnesium and alloys 10, 1, 224-238, 2022. DOI: 10.1016/j.jma.2021.09.024
  • Martin, A.; Vilanova, M.; Gil, E.; San Sebastian, M.; Wang, C. Y.; Milenkovic S.; Pérez-Prado, M. T.; Cepeda-Jiménez, C.M. - Influence of the Zr content on the processability of a high strength Al-Zn-Mg-Cu-Zr alloy by laser powder bed fusion. materials characterization 183, 111650, 2022. DOI: 10.1016/j.matchar.2021.111650

    • 2021

  • Shi, D. F.; Wang, C. Y.; Cepeda-Jimenez, C. M.; Perez-Prado, M. T. - Atomic scale interactions of basal dislocations and twin boundaries with ultrathin precipitates in magnesium alloys. acta materialia 221, 117442-117442, 2021. DOI: 10.1016/j.actamat.2021.117442
  • Banait, S.; Jin, X.; Campos, M.; Perez-Prado, M. T. - Precipitation-induced transition in the mechanical behavior of 3D printed Inconel 718 bcc lattices. scripta materialia 203, 114075-114075, 2021. DOI: 10.1016/j.scriptamat.2021.114075
  • Galera-Rueda, C.; Montero-Sistiaga, M. L.; Vanmeensel, K.; Godino-Martinez, M.; Llorca, J.; Pérez-Prado, M.T. - Icosahedral quasicrystal-enhanced nucleation in Al alloys fabricated by selective laser melting. additive manufacturing 44, 102053-102053, 2021. DOI: 10.1016/j.addma.2021.102053
  • Martin, A.; San Sebastian, M.; Gil, E.; Wang, C. Y.; Milenkovic, S.; Pérez-Prado, M.T.; Cepeda-Jiménez, C.M. - Effect of the heat treatment on the microstructure and hardness evolution of a AlSi10MgCu alloy designed for laser powder bed fusion. materials science and engineering: a 819, 141487, 2021. DOI: 10.1016/j.msea.2021.141487
  • Galera-Rueda, C.; Nieto-Valeiras, E.; Gardon, M.; Pérez-Prado, M.-T.; Llorca, J. - Effect of ZrH2 particles on the microstructure and mechanical properties of IN718 manufactured by selective laser melting. materials science & engineering a 813, 141123, 2021. DOI: 10.1016/j.msea.2021.141123
  • de Oliveira, P.C.; Montoro, L.A.; Perez-Prado, M.T.; Hohenwarter, A.; Figueiredo, R.B.; Isaac, A. - Development of segregations in a Mg-Mn-Nd alloy during HPT processing. materials science and engineering: a 802, 140423, 2021. DOI: 10.1016/j.msea.2020.140423

    • 2020

  • Herrera-Solaza, V.; Cepeda-Jiménez, C.M.; Pérez-Prado, M.T.; Segurado, J.; Niffeneggera, M. - The influence of underlying microstructure on surface stress and strain fields calculated by crystal plasticity finite element method. materials today communications 24, 101176-101176, 2020. DOI: 10.1016/j.mtcomm.2020.101176
  • Liu, F.; Xin. R.; Zhang, M-X.; Pérez-Prado, M.T.; Liu, Q. - Evaluating the orientation relationship of prismatic precipitates generated by detwinning in Mg alloys. acta materialia 195, 263-273, 2020. DOI: 10.1016/j.actamat.2020.05.031
  • Cepeda-Jiménez, C.C; Potenza, F; Magalini, E; Luchin, V; Molinari, A; Pérez-Prado, M.T. - Effect of energy density on the microstructure and texture evolution of Ti-6Al-4V manufactured by laser powder bed fusion. materials characterization 163, 110238, 2020. DOI: 10.1016/j.matchar.2020.110238
  • Wang, C. Y.; Cepeda-Jimenez, C. M.; Perez-Prado, M. T. - Dislocation-particle interactions in magnesium alloys. acta materialia 194, 190-206, 2020. DOI: 10.1016/j.actamat.2020.04.055
  • Perez-Prado, M-T.; Bohlen, J.; Yi, S.; Letzig, D.; Al-Samman, TalalT. - Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development. jom , 2020. DOI: 10.1007/s11837-020-04051-5
  • Wang, C.; Monclus, M. A.; Yang, L.; Cui, Y.; Perez-Prado, M. T. - Effect of nanoscale alpha precipitation on slip activity in ultrastrong beta titanium alloys. materials letters 264, 127398-127398, 2020. DOI: 10.1016/j.matlet.2020.127398

    • 2019

  • Martin, Arturo; Maria Cepeda-Jimenez, Carmen; Teresa Perez-Prado, Maria - Gas atomization of gamma-TiAl Alloy Powder for Additive Manufacturing. acta materialia , 2019. DOI: 10.1002/adem.201900594
  • C.M.Cepeda-Jiménez, M.Castillo-Rodríguez, M.T.Pérez-Prado - Origin of the low precipitation hardening in magnesium alloys. acta materialia 165, 164-176, 2019. DOI: 10.1016/j.actamat.2018.11.044

    • 2018

  • Wang, C.; Li, N.; Cui, Y.; Perez-Prado, M. T. - Effect of solutes on the rate sensitivity in Ti-xAl-yMo-zV and Ti-xAl-yMo-zCr beta-Ti alloys. scripta materialia 149, 129-133, 2018. DOI: 10.1016/j.scriptamat.2018.02.028
  • Cepeda-Jimenez, C. M.; Prado-Martinez, C.; Perez-Prado, M. T. - Understanding the high temperature reversed yield asymmetry in a Mg-rare earth alloy by slip trace analysis. acta materialia 145, 264-277, 2018. DOI: 10.1016/j.actamat.2017.12.021
  • Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon - Slip transfer across gamma-TiAl lamellae in tension. materials & design 146, 81-95, 2018. DOI: 10.1016/j.matdes.2018.02.072
  • Wang, C. Y.; Yang, L. W.; Cui, Y. -W.; Perez-Prado, M. T. - High throughput analysis of solute effects on the mechanical behavior and slip activity of beta titanium alloys. materials & design 137, 371-383, 2018. DOI: 10.1016/j.matdes.2017.10.029
  • C. Wang; N. Li; Y. Cui; M.T. Pérez-Prado - Effect of solutes on the rate sensitivity in Ti-xAl-yMo-zV and Ti-xAl-yMo-zCr β-Ti alloys. scripta materialia 149, 129-133, 2018. DOI: 10.1016/j.scriptamat.2018.02.028
  • C.Y. Wang; L.W. Yang ; Y.-W. Cui; M.T. Pérez-Prado - High throughput analysis of solute effects on the mechanical behavior and slip activity of beta titanium alloys.. materials & design 137 , 371-383 , 2018. DOI: 10.1016/j.matdes.2017.10.029

    • 2017

  • Cepeda-Jimenez, C. M.; Castillo-Rodriguez, M.; Molina-Aldareguia, J. M.; Huang, Y.; Langdon, T. G.; Perez-Prado, M. T. - Controlling the high temperature mechanical behavior of Al alloys by precipitation and severe straining. materials science and engineering a-structural materials properties microstructure and processing 679, 36-47, 2017. DOI: 10.1016/j.msea.2016.10.026
  • Cepeda-Jimenez, C. M.; Beltran, J. I.; Hernando, A.; Garcia, M. A.; Yndurain, F.; Zhilyaev, A.; Perez-Prado, M. T. - Tuning the magnetic properties of pure hafnium by high pressure torsion. acta materialia 123, 206-213, 2017. DOI: 10.1016/j.actamat.2016.10.052
  • Palomares-Garcia, A. J.; Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M. - Effect of nanoscale thick lamellae on the micromechanical response of a TiAl alloy. scripta materialia 139, 17-21, 2017. DOI: 10.1016/j.scriptamat.2017.06.002
  • Hidalgo-Manrique, P.; Robson, J. D.; Perez-Prado, M. T. - Precipitation strengthening and reversed yield stress asymmetry in Mg alloys containing rare-earth elements: A quantitative study. acta materialia 124, 456-467, 2017. DOI: 10.1016/j.actamat.2016.11.019
  • Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon - Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression. acta materialia 123, 102-114, 2017. DOI: 10.1016/j.actamat.2016.10.034

    • 2016

  • Cepeda-Jimenez, C. M.; Hernando, A.; Barandiaran, J. M.; Perez-Prado, M. T. - Onset of room temperature ferromagnetism by plastic deformation in three paramagnetic pure metals. scripta materialia 118, 41-45, 2016. DOI: 10.1016/j.scriptamat.2016.03.002
  • Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T. - EBSD-Assisted Slip Trace Analysis During In Situ SEM Mechanical Testing: Application to Unravel Grain Size Effects on Plasticity of Pure Mg Polycrystals. jom 68, 116-126, 2016. DOI: 10.1007/s11837-015-1521-6
  • Cepeda-Jimenez, C. M.; Perez-Prado, M. T. - Microplasticity-based rationalization of the room temperature yield asymmetry in conventional polycrystalline Mg alloys. acta materialia 108, 304-316, 2016. DOI: 10.1016/j.actamat.2016.02.023

    • 2015

  • Sket, Federico; Fernandez, Ana; Jerusalem, Antoine; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria - Effect of Hydrostatic Pressure on the 3D Porosity Distribution and Mechanical Behavior of a High Pressure Die Cast Mg AZ91 Alloy. metallurgical and materials transactions a-physical metallurgy and materials science 46A, 4056-4069, 2015. DOI: 10.1007/s11661-015-3024-z
  • Hidalgo-Manrique, P.; Herrera-Solaz, V.; Segurado, J.; Llorca, J.; Galvez, F.; Ruano, O. A.; Yi, S. B.; Perez-Prado, M. T. - Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature. acta materialia 92, 265-277, 2015. DOI: 10.1016/j.actamat.2015.03.053
  • Sanchez-Martin, R.; Zambaldi, C.; Perez-Prado, M. T.; Molina-Aldareguia, J. M. - High temperature deformation mechanisms in pure magnesium studied by nanoindentation. scripta materialia 104, 9-12, 2015. DOI: 10.1016/j.scriptamat.2015.03.012
  • Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Carreno, F.; Perez-Prado, M. T. - Prominent role of basal slip during high-temperature deformation of pure Mg polycrystals. acta materialia 85, 1-13, 2015. DOI: 10.1016/j.actamat.2014.11.013
  • Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Molina-Aldareguia, J. M. - Effect of indentation size on the nucleation and propagation of tensile twinning in pure magnesium. acta materialia 93, 114-128, 2015. DOI: 10.1016/j.actamat.2015.04.005
  • Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T. - Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium. acta materialia 88, 232-244, 2015. DOI: 10.1016/j.actamat.2015.01.032
  • Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T. - Effect of grain size on slip activity in pure magnesium polycrystals. acta materialia 84, 443-456, 2015. DOI: 10.1016/j.actamat.2014.10.001

    • 2014

  • Perez-Prado, M. T.; LLorca, J.; Boehlert, C. J. - Processing-Microstructure-Property Relationships & Deformation Mechanisms of Magnesium Alloys Foreword. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 3195-3196, 2014. DOI: 10.1007/s11661-013-2183-z
  • Srinivasarao, B.; Torralba, J. M.; Taleghani, M. A. Jabbari; Perez-Prado, M. T. - Very strong pure titanium by field assisted hot pressing of dual phase powders. materials letters 123, 75-78, 2014. DOI: 10.1016/j.matlet.2014.02.086
  • Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T. - Control of the Mechanical Asymmetry in an Extruded MN11 Alloy by Static Annealing. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 3282-3291, 2014. DOI: 10.1007/s11661-013-2169-x
  • Munoz-Moreno, R.; Ruiz-Navas, E. M.; Boehlert, C. J.; Llorca, J.; Torralba, J. M.; Perez-Prado, M. T. - Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at%)-0.8 vol%TiB2 alloy by high temperature in situ mechanical testing. materials science and engineering a-structural materials properties microstructure and processing 606, 276-289, 2014. DOI: 10.1016/j.msea.2014.03.078
  • Herrera-Solaz, V.; Hidalgo-Manrique, R.; Perez-Prado, M. T.; Letzig, D.; Llorca, J.; Segurado, J. - Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys. materials letters 128, 199-203, 2014. DOI: 10.1016/j.matlet.2014.04.144
  • Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Bohlen, J.; Gutierrez-Urrutia, I.; Llorca, J.; Molina-Aldareguia, J. M. - Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation. acta materialia 71, 283-292, 2014. DOI: 10.1016/j.actamat.2014.03.014

    • 2013

  • Boehlert, Carl; Chen, Zhe; Gutierrez-Urrutia, Ivan; Llorca, Javier; Perez-Prado, Maria Teresa - On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31. superplasticity in advanced materials 735, 22-26, 2013. DOI: 10.4028/www.scientific.net/MSF.735.22
  • Srinivasarao, B.; Zhilyaev, A. P.; Munoz-Moreno, R.; Perez-Prado, M. T. - Effect of high pressure torsion on the microstructure evolution of a gamma Ti-45Al-2Nb-2Mn-0.8 vol% TiB2 alloy. journal of materials science 48, 4599-4605, 2013. DOI: 10.1007/s10853-013-7201-4
  • Munoz-Moreno, Rocio; Teresa Perez-Prado, M.; Llorca, Javier; Maria Ruiz-Navas, Elisa; Boehlert, Carl J. - Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 1887-1896, 2013. DOI: 10.1007/s11661-012-1515-8
  • Boehlert, C. J.; Chen, Z.; Chakkedath, A.; Gutierrez-Urrutia, I.; Llorca, J.; Bohlen, J.; Yi, S.; Letzig, D.; Perez-Prado, M. T. - In situ analysis of the tensile deformation mechanisms in extruded Mg-1Mn-1Nd (wt%). philosophical magazine 93, 598-617, 2013. DOI: 10.1080/14786435.2012.725954
  • Biswas, Somjeet; Sket, Federico; Chiumenti, Michele; Gutierrez-Urrutia, Ivan; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria - Relationship Between the 3D Porosity and beta-Phase Distributions and the Mechanical Properties of a High Pressure Die Cast AZ91 Mg Alloy. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 4391-4403, 2013. DOI: 10.1007/s11661-013-1783-y
  • Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T. - Effect of Nd Additions on Extrusion Texture Development and on Slip Activity in a Mg-Mn Alloy. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 4819-4829, 2013. DOI: 10.1007/s11661-013-1823-7
  • Srinivasarao, B.; Zhilyaev, A. P.; Langdon, T. G.; Perez-Prado, M. T. - On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion. materials science and engineering a-structural materials properties microstructure and processing 562, 196-202, 2013. DOI: 10.1016/j.msea.2012.11.027
  • Dudamell, N. V.; Hidalgo-Manrique, P.; Chakkedath, A.; Chen, Z.; Boehlert, C. J.; Galvez, E.; Yi, S.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T. - Influence of strain rate on the twin and slip activity of a magnesium alloy containing neodymium. materials science and engineering a-structural materials properties microstructure and processing 583, 220-231, 2013. DOI: 10.1016/j.msea.2013.07.003
  • Fernandez, A.; Jerusalem, A.; Gutierrez-Urrutia, I.; Perez-Prado, M. T. - Three-dimensional investigation of grain boundary-twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling. acta materialia 61, 7679-7692, 2013. DOI: 10.1016/j.actamat.2013.09.005

    • 2012

  • Chen, Z.; Boehlert, C.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T. - TENSILE AND CREEP DEFORMATION MECHANISMS IN ROLLED AZ31. magnesium technology 2012 , 99-104, 2012. DOI: 10.1007/978-3-319-48203-3_19
  • Ulacia, I.; Dudamell, N. V.; Esnaola, J. A.; Yi, S. B.; Perez-Prado, M. T.; Galvez, F.; Letzig, D.; Hurtado, I. - Evolution of texture and microstructure of AZ31 Mg alloy sheet at high strain rates. thermec 2011, pts 1-4 706-709, 1255-1260, 2012. DOI: 10.4028/www.scientific.net/MSF.706-709.1255
  • Dudamell, N. V.; Galvez, F.; Perez-Prado, M. T. - Dynamic deformation of high pressure die-cast magnesium alloys. revista de metalurgia 48, 351-357, 2012. DOI: 10.3989/revmetalm.1201
  • Munoz-Moreno, Rocio; Boehlert, Carl J.; Teresa Perez-Prado, M.; Ruiz-Navas, Elisa M.; Llorca, Javier - In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn+0.8 vol pct TiB2. metallurgical and materials transactions a-physical metallurgy and materials science 43A, 1198-1208, 2012. DOI: 10.1007/s11661-011-1022-3
  • Dudamell, N. V.; Ulacia, I.; Galvez, F.; Yi, S.; Bohlen, J.; Letzig, D.; Hurtado, I.; Perez-Prado, M. T. - Influence of texture on the recrystallization mechanisms in an AZ31 Mg sheet alloy at dynamic rates. materials science and engineering a-structural materials properties microstructure and processing 532, 528-535, 2012. DOI: 10.1016/j.msea.2011.11.018
  • Boehlert, C. J.; Chen, Z.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T. - In situ analysis of the tensile and tensile-creep deformation mechanisms in rolled AZ31. acta materialia 60, 1889-1904, 2012. DOI: 10.1016/j.actamat.2011.10.025

    • 2011

  • Moreno-Valle, E.; Perez-Prado, M. T.; Murashkin, M. Yu.; Valiev, R. Z.; Bobruk, E. V.; Sabirov, I. - Effect of Grain Refinement on the Mechanical Behaviour of an Al6061 Alloy at Cryogenic Temperatures. 14th international conference on material forming esaform, 2011 proceedings 1353, 505-510, 2011. DOI: 10.1063/1.3589565
  • Sabirov, I.; Molina-Aldareguia, J. M.; Jiang, L.; Kassner, M. E.; Perez-Prado, M. T. - Effect of Accumulative Roll Bonding on Plastic Flow Properties of Commercially Pure Zirconium. 14th international conference on material forming esaform, 2011 proceedings 1353, 487-492, 2011. DOI: 10.1063/1.3589562
  • Moreno-Valle, E. C.; Sabirov, I.; Perez-Prado, M. T.; Murashkin, M. Yu.; Bobruk, E. V.; Valiev, R. Z. - Effect of the grain refinement via severe plastic deformation on strength properties and deformation behavior of an A16061 alloy at room and cryogenic temperatures. materials letters 65, 2917-2919, 2011. DOI: 10.1016/j.matlet.2011.06.057
  • Srinivasarao, B.; Zhilyaev, A. P.; Perez-Prado, M. T. - Orientation dependency of the alpha to omega plus beta transformation in commercially pure zirconium by high-pressure torsion. scripta materialia 65, 241-244, 2011. DOI: 10.1016/j.scriptamat.2011.04.017
  • Zhilyaev, A. P.; Sabirov, I.; Gonzalez-Doncel, G.; Molina-Aldareguia, J.; Srinivasarao, B.; Perez-Prado, M. T. - Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions. materials science and engineering a-structural materials properties microstructure and processing 528, 3496-3505, 2011. DOI: 10.1016/j.msea.2011.01.062
  • Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.; Semenova, I. P.; Salimgareeva, G. Kh; Valiev, R. Z. - Anisotropy of mechanical properties in high-strength ultra-fine-grained pure Ti processed via a complex severe plastic deformation route. scripta materialia 64, 69-72, 2011. DOI: 10.1016/j.scriptamat.2010.09.006
  • Dudamell, N. V.; Ulacia, I.; Galvez, F.; Yi, S.; Bohlen, J.; Letzig, D.; Hurtado, I.; Perez-Prado, M. T. - Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature. acta materialia 59, 6949-6962, 2011. DOI: 10.1016/j.actamat.2011.07.047

    • 2010

  • Jerusalem, A.; Fernandez, A.; Perez-Prado, M. T. - Continuum modeling of {10(1)over-bar2} twinning in a Mg-3%Al-1%Zn rolled sheet. revista de metalurgia 46, 133-137, 2010. DOI: 10.3989/revmetalmadrid.16XIIPMS
  • Molina-Aldareguia, J. M.; Perez-Prado, M. T.; Valiev, R. Z.; Semenova, I. P.; Sabirov, I. - HIGH STRENGTH ULTRA-FINE GRAINED TITANIUM PRODUCED VIA A NOVEL SPD PROCESSING ROUTE. international journal of material forming 3, 407-410, 2010. DOI: 10.1007/s12289-010-0793-1
  • Zhilyaev, Alexander P.; Sharafutdinov, Alfred V.; Teresa Perez-Prado, M. - Phase Transformations During High-Pressure Torsion of Pure Zr and of a Zr-2.5%Nb Alloy. advanced engineering materials 12, 754-757, 2010. DOI: 10.1002/adem.200900348
  • Perez-Prado, M. T.; Sharafutdinov, A.; Zhilyaev, A. P. - Thermal stability of pure bcc Zr fabricated by high pressure torsion. materials letters 64, 211-214, 2010. DOI: 10.1016/j.matlet.2009.10.049
  • Sabirov, I.; Perez-Prado, M. T.; Murashkin, M.; Molina-Aldareguia, J. M.; Bobruk, E. V.; Yunusova, N. F.; Valiev, R. Z. - APPLICATION OF EQUAL CHANNEL ANGULAR PRESSING WITH PARALLEL CHANNELS FOR GRAIN REFINEMENT IN ALUMINIUM ALLOYS AND ITS EFFECT ON DEFORMATION BEHAVIOR. international journal of material forming 3, 411-414, 2010. DOI: 10.1007/s12289-010-0794-0
  • Zhilyaev, A. P.; Galvez, F.; Sharafutdinov, A.; Perez-Prado, M. T. - Influence of the high pressure torsion die geometry on the allotropic phase transformations in pure Zr. materials science and engineering a-structural materials properties microstructure and processing 527, 3918-3928, 2010. DOI: 10.1016/j.msea.2010.02.066
  • Multigner, M.; Ferreira-Barragans, S.; Frutos, E.; Jaafar, M.; Ibanez, J.; Marin, P.; Perez-Prado, M. T.; Gonzalez-Doncel, G.; Asenjo, A.; Gonzalez-Carrasco, J. L. - Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties. surface & coatings technology 205, 1830-1837, 2010. DOI: 10.1016/j.surfcoat.2010.07.126
  • Ulacia, I.; Dudamell, N. V.; Galvez, F.; Yi, S.; Perez-Prado, M. T.; Hurtado, I. - Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates. acta materialia 58, 2988-2998, 2010. DOI: 10.1016/j.actamat.2010.01.029

    • 2009

  • Perez-Prado, M. T.; Zhilyaev, A. P. - First Experimental Observation of Shear Induced hcp to bcc Transformation in Pure Zr. physical review letters 102, 2009. DOI: 10.1103/PhysRevLett.102.175504

Follow Us

Linkedin-in Icon-twitter-x Youtube Instagram Facebook-f Flickr Spotify

Contact us

Phone: (+34) 91 549 34 22
Email: contact.materials@imdea.org

Location

C/ Eric Kandel, 2
Tecnogetafe
28906, Getafe, Madrid (Spain)

HOW TO ARRIVE

© All rights reserved

Privacy policy | Accesibility | Disclaimer | Ethics Channel

© Fractales