Publication

2024

M. Campos; M. Cartón-Cordero; L. García de la Cruz; F.G. Caballero; J.D. Poplawsky; J.M. Torralba - Enhancement of γ/γ’ Microstructured Cobalt Superalloys Produced from Atomized Powder by Creating a Harmonic Structure. metals 70, 2024. DOI: doi.org/10.3390/met14010070

2023

J.M. Torralba; D. Iriarte; D. Tourret; A. Meza - Using multicomponent recycled electronic waste alloys to produce high entropy alloys. intermetallics 164, 2023. DOI: doi.org/10.1016/j.intermet.2023.108128
Mohammadzadeh, A, Heidarzadeh, A, Becker, H, Robles, JV, Meza, A, Avella, M, Monclus, MA, Tourret, D, Torralba, JM - Exploring the impact of configurational entropy on the design and development of CoNi-based superalloys for sustainable applications. journal of alloys and compounds 956, 2023. DOI: DOI10.1016/j.jallcom.2023.171380
Kumaran, SV, Garbiex, D, Torralba, JM - A novel and sustainable method to develop non-equiatomic CoCrFeNiMox high entropy alloys via spark plasma sintering using commercial commodity powders and evaluation of its mechanical behaviour. materials science & engineering: a 878, 2023. DOI: DOI10.1016/j.msea.2023.145207
Xiao-Mei Yang, Guang-Zhong Yin, Olga Zafra Amorós, María Arroyo Hernández, Jimena de la Vega & José Manuel Torralba - Polydopamine surface functionalized submicron ZnO for broadening the processing window of 3D printable PLA composites. journal of polymer research 30,5, 165-165, 2023. DOI: 10.1007/s10965-023-03540-w

2022

Deng, Xiangxing; Zheng, Ruonian; Manuel Torralba, Jose; Garcia-Junceda, Andrea; Wang, Yangwei - Effect of C content on microstructure and mechanical properties of Cr-based hard composites obtained by different sintering methods. materials science and engineering: a 848, 143377-143377, 2022. DOI: doi.org/10.1016/j.msea.2022.143377
Meza, A.; Macia, E.; Chekonin, P.; Altstadt, E.; Rabanal, M. E.; Torralba, J.M.; Campos, M - The effect of composition and microstructure on the creep behaviour of 14 Cr ODS steels consolidated by SPS. materials science and engineering: a 849, 143441-143441, 2022. DOI: doi.org/10.1016/j.msea.2022.143441

2021

Torralba, J. M. - Powder Metallurgy: A New Open Section in Metals. metals 11 (10), 1519-1519, 2021. DOI: 10.3390/met11101519
Alvaredo, Paula; Torralba, Jose M.; García-Junceda, Andrea. - Sintering of High Entropy Alloys: Processing and Properties. elsevier 3, 362-371, 2021. DOI: 10.1016/B978-0-12-819726-4.00106-X
Torralba, J.M.; Kumaránb, V. - Development of competitive high-entropy alloys using commodity powders. materials letters 301, 130202, 2021. DOI: 10.1016/j.matlet.2021.130202

2020

Torralba, J.M.; Alvaredo, P.; Garcia-Junceda, A. - Powder metallurgy and high-entropy alloys: update on new opportunities. powder metallurgy 63, 227-236, 2020. DOI: 10.1080
Torralba, J.M.; Campos, M. - High Entropy Alloys Manufactured by Additive Manufacturing. metals 10(5), 639, 2020. DOI: 10.3390
Garcia-Junceda, A.; Macia, E.; Garbiec, D.; Serrano, M.; Torralba, J. M.; Campos, M - Effect of Small Variations in Zr Content on the Microstructure and Properties of Ferritic ODS Steels Consolidated by SPS. metals 10(3), 348-348, 2020. DOI: 10.3390/met10030348
Deng, Xiangxing; Cinca, Nuria; Garbiec, Dariusz; Manuel Torralba, Jose; Garcia-Junceda, Andrea - Wear resistance of nanostructured Cr-based WC hardmetals sintered by spark plasma sintering. international journal of refractory metals and hard materials 86, 105092-105092, 2020. DOI: 10.1016/j.ijrmhm.2019.105092

2019

Torralba, JM; Alvaredo, P; Garcia-Junceda, A - High-entropy alloys fabricated via powder metallurgy. A critical review. powder metallurgy 62, 84-114, 2019. DOI: 10.1080/00325899.2019.1584454
J. M. Torralba, P. Alvaredo, A. García-Junceda - High-entropy alloys fabricated via powder metallurgy: A critical review. international journal of powder metallurgy 62, 84-114, 2019. DOI: 10.1080/00325899.2019.1584454
Andrea García-Junceda, Coral Díaz-Rivera, Víctor Gómez-Torralba, María Rincón, Mónica Campos, José Manuel Torralba - Analysis of the interface and mechanical properties of field-assisted sintered duplex stainless steels. materials science and engineering a-structural materials properties microstructure and processing 740-741, 410-419, 2019. DOI: 10.1016/j.msea.2018.10.111

2018

Garcia-Junceda, A.; Saez, I.; Deng, X. X.; Torralba, J. M. - Development of a Cr-Based Hard Composite Processed by Spark Plasma Sintering. metallurgical and materials transactions a-physical metallurgy and materials science 49A, 1363-1371, 2018. DOI: 10.1007/s11661-018-4477-7
Carton-Cordero, Marta; Campos, Monica; Freund, Lisa P.; Kolb, Markus; Neumeier, Steffen; Goeken, Mathias; Torralba, Jose M. - Microstructure and compression strength of Co-based superalloys hardened by gamma ‘ and carbide precipitation. materials science and engineering a-structural materials properties microstructure and processing 734, 437-444, 2018. DOI: 10.1016/j.msea.2018.08.007
Garcia-Junceda, A.; Rinon, M.; Torralba, J. M. - Development of Duplex Stainless Steels by Field-Assisted Hot Pressing: Influence of the Particle Size and Morphology of the Powders on the Final Mechanical Properties. metallurgical and materials transactions a-physical metallurgy and materials science 49A, 264-271, 2018. DOI: 10.1007/s11661-017-4385-2

2016

Garcia-Junceda, Andrea; Campos, Monica; Garcia-Rodriguez, Nerea; Manuel Torralba, Jose - On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels. metallurgical and materials transactions a-physical metallurgy and materials science 47A, 5325-5333, 2016. DOI: 10.1007/s11661-016-3538-z
Bernardo, Elena; Galan-Salazar, Andrea; Campos, Monica; Torralba, Jose M. - A NEW APPROACH TO UNDERSTAND THE CONTRIBUTION OF THE MICROSTRUCTURE IN THE FRACTURE BEHAVIOR OF SINTERED STEELS. international journal of powder metallurgy 52, 29-35, 2016. DOI:
Carton-Cordero, M.; Srinivasarao, B.; Campos, M.; Garcia-Junceda, A.; Torralba, J. M. - On the role of processing parameters in sintered new Co-based (W,Al) alloys. journal of alloys and compounds 674, 406-412, 2016. DOI: 10.1016/j.jallcom.2016.03.077
Calderon, Raquel De Oro; Bernardo, Elena; Campos, Monica; Gierl-Mayer, Christian; Danninger, Herbert; Torralba, Jose M. - Tailoring master alloys for liquid phase sintering: Effect of introducing oxidation-sensitive elements. powder metallurgy 59, 31-40, 2016. DOI: 10.1080/00325899.2016.1148897

2015

Danninger, H.; Torralba, J. M. - Untitled. powder metallurgy 58, 1-2, 2015. DOI: 10.1179/0032589915Z.000000000223
Bernardo, Elena; de Oro, Raquel; Campos, Monica; Torralba, Jose M. - NEW FINDINGS ON THE WETTABILITY AND SPREADING OF COPPER ON IRON-BASE SUBSTRATES. international journal of powder metallurgy 51, 29-36, 2015. DOI:
Garcia-Junceda, Andrea; Garcia-Rodriguez, Nerea; Campos, Monica; Carton-Cordero, Marta; Torralba, Jose Manuel - Effect of Zirconium on the Microstructure and Mechanical Properties of an Al-Alloyed ODS Steel Consolidated by FAHP. journal of the american ceramic society 98, 3582-3587, 2015. DOI: 10.1111/jace.13691
Garcia-Junceda, Andrea; Acebo, Laura; Manuel Torralba, Jose - Study and Suppression of the Microstructural Anisotropy Generated During the Consolidation of a Carbonyl Iron Powder by Field-Assisted Hot Pressing. metallurgical and materials transactions a-physical metallurgy and materials science 46A, 3192-3198, 2015. DOI: 10.1007/s11661-015-2919-z
Oro, Raquel; Campos, Monica; Gierl-Mayer, Christian; Danninger, Herbert; Manuel Torralba, Jose - New Alloying Systems for Sintered Steels: Critical Aspects of Sintering Behavior. metallurgical and materials transactions a-physical metallurgy and materials science 46A, 1349-1359, 2015. DOI: 10.1007/s11661-014-2707-1
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M. - Capillary rheology studies of INVAR 36 feedstocks for powder injection moulding. powder technology 273, 1-7, 2015. DOI: 10.1016/j.powtec.2014.12.027
Romero, Pablo; Oro, Raquel; Campos, Monica; Torralba, Jose M.; Guzman de Villoria, Roberto - Simultaneous synthesis of vertically aligned carbon nanotubes and amorphous carbon thin films on stainless steel. carbon 82, 31-38, 2015. DOI: 10.1016/j.carbon.2014.10.020

2014

Cui, Yuwen; Torralba, Jose M.; Lu, Xiao-Gang - International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control Foreword. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 1693-1693, 2014. DOI: 10.1007/s11661-014-2223-3
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M. - Mechanical and functional properties of Invar alloy for mu-MIM. powder metallurgy 57, 127-136, 2014. DOI: 10.1179/1743290113Y.0000000081
Oro, Raquel; Hryha, Eduard; Campos, Monica; Torralba, Jose M. - Effect of processing conditions on microstructural features in Mn-Si sintered steels. materials characterization 95, 105-117, 2014. DOI: 10.1016/j.matchar.2014.06.011
Torralba, Jose M.; Campos, Monica - Toward high performance in Powder Metallurgy. revista de metalurgia 50, 2014. DOI: 10.3989/revmetalm.017
Campos, Monica; Antonio Sicre-Artalejo, Jose; Manuel Torralba, Jose; Zbiral, Hannes; Danninger, Herbert; Pena, P. - Degradation of alumina refractory bricks by sintering Mn low-alloy steels. ceramics international 40, 3063-3070, 2014. DOI: 10.1016/j.ceramint.2013.09.140
Garcia-Rodriguez, N.; Campos, M.; Torralba, J. M.; Berger, M. H.; Bienvenu, Y. - Capability of mechanical alloying and SPS technique to develop nanostructured high Cr, Al alloyed ODS steels. materials science and technology 30, 1676-1684, 2014. DOI: 10.1179/1743284714Y.0000000595
Abajo, C.; Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M. - Optimisation of eco-friendly binary binder system for powder injection moulding. powder metallurgy 57, 196-203, 2014. DOI: 10.1179/1743290114Y.0000000089
Srinivasarao, B.; Torralba, J. M.; Taleghani, M. A. Jabbari; Perez-Prado, M. T. - Very strong pure titanium by field assisted hot pressing of dual phase powders. materials letters 123, 75-78, 2014. DOI: 10.1016/j.matlet.2014.02.086
Molinari, A.; Bisoffi, E.; Menapace, C.; Torralba, J. - Shrinkage kinetics during early stage sintering of cold isostatically compacted iron powder. powder metallurgy 57, 61-69, 2014. DOI: 10.1179/1743290113Y.0000000068
Torralba, J. M.; Esteban, L.; Bernardo, E.; Campos, M. - Understanding contribution of microstructure to fracture behaviour of sintered steels. powder metallurgy 57, 357-364, 2014. DOI: 10.1179/1743290114Y.0000000119
Munoz-Moreno, R.; Ruiz-Navas, E. M.; Boehlert, C. J.; Llorca, J.; Torralba, J. M.; Perez-Prado, M. T. - Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at%)-0.8 vol%TiB2 alloy by high temperature in situ mechanical testing. materials science and engineering a-structural materials properties microstructure and processing 606, 276-289, 2014. DOI: 10.1016/j.msea.2014.03.078
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M. - Water soluble Invar 36 feedstock development for mu PIM. journal of materials processing technology 214, 436-444, 2014. DOI: 10.1016/j.jmatprotec.2013.09.014
Jabbari-Taleghani, M. A.; Torralba, J. M. - Hot workability of nanocrystalline AZ91 magnesium alloy. journal of alloys and compounds 595, 1-7, 2014. DOI: 10.1016/j.jallcom.2014.01.091
Bernardo, Elena; de Oro, Raquel; Campos, Monica; Manuel Torralba, Jose - Design of Low-Melting Point Compositions Suitable for Transient Liquid Phase Sintering of PM Steels Based on a Thermodynamic and Kinetic Study. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 1748-1760, 2014. DOI: 10.1007/s11661-013-2137-5
Munoz-Moreno, R.; Ruiz-Navas, E. M.; Srinivasarao, B.; Torralba, J. M. - Microstructural Development and Mechanical Properties of PM Ti-45Al-2Nb-2Mn-0.8 vol.% TiB2 Processed by Field Assisted Hot Pressing. journal of materials science & technology 30, 1145-1154, 2014. DOI: 10.1016/j.jmst.2014.08.008
Jabbari Taleghani, M. A.; Ruiz Navas, E. M.; Torralba, J. M. - Microstructural and mechanical characterisation of 7075 aluminium alloy consolidated from a premixed powder by cold compaction and hot extrusion. materials & design 55, 674-682, 2014. DOI: 10.1016/j.matdes.2013.10.028

2013

Navarro, G.; Jabbari Taleghani, M. A.; Torralba, J. M. - Pressed and sintered AISI 4140 PM low alloy steel from gas atomised powders. powder metallurgy 56, 11-13, 2013. DOI: 10.1179/0032589912Z.00000000087
Garcia, P.; Campos, M.; Torralba, J. M. - Dimensional consistency achieved in high-performance synchronizing hubs. revista de metalurgia 49, 55-64, 2013. DOI: 10.3989/revmetalm.1218
Straffelini, G.; Da Costa, L. Dione; Menapace, C.; Zanella, C.; Torralba, J. M. - Properties of AZ91 alloy produced by spark plasma sintering and extrusion. powder metallurgy 56, 405-410, 2013. DOI: 10.1179/1743290113Y.0000000060
Hidalgo, J.; Fernandez-Blazquez, J. P.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M. - Effect of the particle size and solids volume fraction on the thermal degradation behaviour of Invar 36 feedstocks. polymer degradation and stability 98, 2546-2555, 2013. DOI: 10.1016/j.polymdegradstab.2013.09.015
Oro, Raquel; Campos, Monica; Hryha, Eduard; Manuel Torralba, Jose; Nyborg, Lars - Surface phenomena during the early stages of sintering in steels modified with Fe-Mn-Si-C master alloys. materials characterization 86, 80-91, 2013. DOI: 10.1016/j.matchar.2013.07.022
Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M. - Thermal stability and degradation kinetics of feedstocks for powder injection moulding – A new way to determine optimal solid loading?. polymer degradation and stability 98, 1188-1195, 2013. DOI: 10.1016/j.polymdegradstab.2013.03.018
Taleghani, M. A. Jabbari; Torralba, J. M. - The microstructural evolution of a pre-alloyed AZ91 magnesium alloy powder through high-energy milling and subsequent isothermal annealing. materials letters 98, 182-185, 2013. DOI: 10.1016/j.matlet.2013.02.052
Torralba, Jose M.; Navarro, Alfonso; Campos, Monica - From the TRIP effect and Quenching and Partitioning steels concepts to the development of new high-performance, lean powder metallurgy steels. materials science and engineering a-structural materials properties microstructure and processing 573, 253-256, 2013. DOI: 10.1016/j.msea.2013.02.034
Jabbari Taleghani, M. A.; Torralba, J. M. - Hot deformation behavior and workability characteristics of AZ91 magnesium alloy powder compacts-A study using processing map. materials science and engineering a-structural materials properties microstructure and processing 580, 142-149, 2013. DOI: 10.1016/j.msea.2013.04.071
Hidalgo, J.; Abajo, C.; Jimenez-Morales, A.; Torralba, J. M. - Effect of a binder system on the low-pressure powder injection moulding of water-soluble zircon feedstocks. journal of the european ceramic society 33, 3185-3194, 2013. DOI: 10.1016/j.jeurceramsoc.2013.06.027

2012

Oro, R.; Campos, M.; Torralba, J. M.; Capdevila, C. - Lean alloys in PM: from design to sintering performance. powder metallurgy 55, 294-301, 2012. DOI: 10.1179/1743290112Y.0000000016
Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M. - Torque rheology of zircon feedstocks for powder injection moulding. journal of the european ceramic society 32, 4063-4072, 2012. DOI: 10.1016/j.jeurceramsoc.2012.06.023

2011

Sicre-Artalejo, Jose; Campos, Monica; Molina-Aldareguia, Jon M.; Torralba, Jose M. - Quantification of hardening in Fe-Mn master alloys prepared by a mechanical alloying process via nanoindentation experiments. journal of materials research 26, 1726-1733, 2011. DOI: 10.1557/jmr.2011.173
Fuentes-Pacheco, L.; Campos, M.; Torralba, J. M. - Thermal stability of nanostructured iron powder as a function of amount and nature of reinforcement (Nb or NbC). revista de metalurgia 47, 373-380, 2011. DOI: 10.3989/revmetalm.1055

2010

Campos, M.; Sicre-Artalejo, J.; Munoz, J. J.; Torralba, J. M. - Effect of Austempering Conditions on the Microstructure and Tensile Properties of Low Alloyed Sintered Steel. metallurgical and materials transactions a-physical metallurgy and materials science 41A, 1847-1854, 2010. DOI: 10.1007/s11661-010-0212-8