Alert Results Effect of carbon content on the corrosion behavior of Ni-Co-Cr-Mo-Cu alloys in both sulfuric and hydrochloric acids 1 of 3 Effect of carbon content on the corrosion behavior of Ni-Co-Cr-Mo-Cu alloys in both sulfuric and hydrochloric acids
The effect of microstructure and strain rate on the 25 °C and 700 °C compression deformation behavior of powder metallurgy processed Ti-45Al-2Nb-2Mn (at.%)-0.8 TiB2 (vol%) alloy
The effect of heating rate and soaking time on microstructure of an advanced high strength steel
Enabling high resolution strain mapping in zirconium alloys
Lunt, D.; Orozco-Caballero, A.; Thomas, R.; Honniball, P.; Frankel, P.; Preuss, M.; da Fonseca, J. Quinta
The effect of the pre-heating stage on the microstructure and texture of a cold rolled FeCMnAlSi steel under conventional and ultrafast heating
Castro Cerda, F. M.; Goulas, C.; Sabirov, I.; Kestens, L. A. I.; Petrov, R. H.
Mechanical properties of aluminosilicate fiber heat-treated from 800 degrees C to 1400 degrees C: Effects of phase transition, grain growth and defects
Jiang, Ru; Liu, Haitao; Yang, Lingwei; Sun, Xun; Cheng, Haifeng
Effect of processing conditions on microstructural features in Mn-Si sintered steels
Oro, Raquel; Hryha, Eduard; Campos, Monica; Torralba, Jose M.
Effect of strain rate on impact response and omega transformation of quenched Zr-Nb alloys
Wang, Yinghao; Tang, Bin; Cui, Y-W.; Kou, Hongchao; Li, Jinshan
Three dimensional (3D) microstructure-based finite element modeling of Al-SiC nanolaminates using focused ion beam (FIB) tomography
Mayer, Carl R.; Molina-Aladareguia, Jon; Chawla, Nikhilesh
Surface phenomena during the early stages of sintering in steels modified with Fe-Mn-Si-C master alloys
Oro, Raquel; Campos, Monica; Hryha, Eduard; Manuel Torralba, Jose; Nyborg, Lars
Strategy for severe friction stir processing to obtain acute grain refinement of an Al-Zn-Mg-Cu alloy in three initial precipitation states
Orozco-Caballero, A.; Hidalgo-Manrique, P.; Cepeda-Jimenez, C. M.; Rey, P.; Verdera, D.; Ruano, O. A.; Carreno, F.