Menu
Suppressed transformation of compression twins to double twins in Mg by activation of a non-basal slip
Icosahedral quasicrystal enhanced nucleation in commercially pure Ni processed by selective laser melting
Influence of grain size and grain boundary misorientation on the fatigue crack initiation mechanisms of textured AZ31 Mg alloy
High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics
Grain boundary slip transfer classification and metric selection with artificial neural networks
A criterion for slip transfer at grain boundaries in Al
Effect of solutes on the rate sensitivity in Ti-xAl-yMo-zV and Ti-xAl-yMo-zCr beta-Ti alloys
Wang, C.; Li, N.; Cui, Y.; Perez-Prado, M. T.
Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu
Yang, L. W.; Wang, C. Y.; Monclus, M. A.; Lu, L.; Molina-Aldareguia, J. M.; Llorca, J.
Landau model of the microstructure and shape memory properties of cubic-monoclinic-II martensite
Lee, Dong-Wook; Xu, Guanglong; Cui, Yuwen
Onset of room temperature ferromagnetism by plastic deformation in three paramagnetic pure metals
Cepeda-Jimenez, C. M.; Hernando, A.; Barandiaran, J. M.; Perez-Prado, M. T.
Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys
Gunderov, D. V.; Maksutova, G.; Churakova, A.; Lukyanov, A.; Kreitcberg, A.; Raab, G. I.; Sabirov, I.; Prokoshkin, S.
Experimental and phenomenological investigations of diffusion in Co-Al-W alloys
Chang, Hui; Xu, Guanglong; Lu, Xiao-Gang; Zhou, Lian; Ishida, Kiyohito; Cui, Yuwen
Evolution of dislocation loops in iron under irradiation: The impact of carbon
Terentyev, D.; Martin-Bragado, I.
Effect of nanoscale thick lamellae on the micromechanical response of a TiAl alloy
Palomares-Garcia, A. J.; Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.
Structure and dynamics of shear bands in amorphous-crystalline nanolaminates
Guo, Wei; Gan, Bin; Molina-Aldareguia, Jon M.; Poplawsky, Jonathan D.; Raabe, Dierk
Continuum modeling of dislocation starvation and subsequent nucleation in nano-pillar compressions
Jerusalem, Antoine; Fernandez, Ana; Kunz, Allison; Greer, Julia R.
Importance of twin defect formation created by solid-phase epitaxial growth: An atomistic study
Martin-Bragado, Ignacio
High temperature deformation mechanisms in pure magnesium studied by nanoindentation
Sanchez-Martin, R.; Zambaldi, C.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.
Three-dimensional dislocation dynamics analysis of size effects on void growth
Chang, Hyung-Jun; Segurado, Javier; LLorca, Javier
Orientation dependency of the alpha to omega plus beta transformation in commercially pure zirconium by high-pressure torsion
Srinivasarao, B.; Zhilyaev, A. P.; Perez-Prado, M. T.
Anisotropy of mechanical properties in high-strength ultra-fine-grained pure Ti processed via a complex severe plastic deformation route
Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.; Semenova, I. P.; Salimgareeva, G. Kh; Valiev, R. Z.
The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy
Sabirov, I.; Barnett, M. R.; Estrin, Y.; Hodgson, P. D.
A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity
Valiev, R. Z.; Murashkin, M. Yu; Sabirov, I.
Effect of solutes on the rate sensitivity in Ti-xAl-yMo-zV and Ti-xAl-yMo-zCr β-Ti alloys
