Publication – Page 2

2024

Y.Y. Liu; C. Intini; M. Dobricic; F.J. O'Brien; J. LLorca; M. Echeverry-Rendón - Collagen-based 3D printed poly (glycerol sebacate) composite scaffold with biomimicking mechanical properties for enhanced cartilage defect repair. international journal of biological macromolecules 280, Part 2, 2024. DOI: 10.1016/j.ijbiomac.2024.135827
W. Shao; H. Hou; S. Liu; J. LLorca - First-principles prediction of the Co-Al phase diagram including configurational, vibrational and magnetic contributions. journal of materials research and technology 31, 1518-1534, 2024. DOI: DOI10.1016/j.jmrt.2024.06.143
W. Ali; J. Ordoño; A. Kopp; C. González; M. Echeverry-Rendón; J. LLorca - Cytocompatibility, cell-material interaction, and osteogenic differentiation of MC3T3-E1 pre-osteoblasts in contact with engineered Mg/PLA composites. journal of biomedical materials research part a , 2024. DOI: DOI10.1002/jbm.a.37767
Z.L. Liu; T.L. Chen; R. Shu; J.Y. Wang; G. Sha; J. LLorca - Hot-Isostatic Pressed Al Melt-Spun Ribbons with Tailored Microstructures and Mechanical Properties for Metallic Optics. metallurgical and materials transactions a-physical metallurgy and materials science , 2024. DOI: DOI10.1007/s11661-024-07463-z
P. MacArdghail; R.A. Barrett; N. Harrison; I. Sabirov; J. LLorca; S.B. Leen - Combined Gleeble physical welding simulation and low-cycle thermo-mechanical fatigue for heat-affected zone material for 9Cr steel: Experimental testing and through-process model. proceedings of the institution of mechanical engineers part l , 2024. DOI: DOI10.1177/14644207241256624
A.K. Boukellal; M. Sarebanzadeh; A. Orozco-Caballero; F. Sket; J. LLorca; D. Tourret - Grain growth competition and formation of grain boundaries during solidification of hcp alloys. acta materialia 269, 2024. DOI: DOI10.1016/j.actamat.2024.119830
S. Liu; H. Hou; W. Shao; J. Yang; Z. Wang; Q. Yang; J. LLorca - Revisiting the precipitation mechanisms of Guinier-Preston zones, η′, and η precipitates in Al-Zn-Mg alloys. acta materialia , 2024. DOI: DOI10.1016/j.actamat.2024.119789
E. Nieto; A. Orozco-Caballero; M. Sarebanzadeh; J. Sun; J. LLorca - Analysis of slip transfer across grain boundaries in Ti via diffraction contrast tomography and high-resolution digital image correlation: When the geometrical criteria are not sufficient. international journal of plasticity 175, 2024. DOI: DOI10.1016/j.ijplas.2024.103941
R. Santon-Güemes; J. LLorca - Dislocation dynamics analysis of the strengthening induced by shearable and non-shearable precipitates in the presence of dislocation pile-ups. european journal of mechanics a-solids 104, 2024. DOI: 10.1016/j.euromechsol.2023.105042
B. Yang; J. LLorca - Origin of nucleation and growth of extension twins in grains unsuitably oriented for twinning during deformation of Mg-1%Al. journal of magnesium and alloys 12, 1186-1203, 2024. DOI: DOI10.1016/j.jma.2024.02.013
B. Yang; V. Vassilev-Galindo; J. LLorca - Application of machine learning to assess the influence of microstructure on twin nucleation in Mg alloys. npj computational materials , 2024. DOI: doi.org/10.1038/s41524-024-01212-x
E. Nieto-Valeiras; E. Ganju; N. Chawla; J. LLorca - Assessment of slip transfer criteria for prismatic-to-prismatic slip in pure Ti from 3D grain boundary data. acta materialia 262, 2024. DOI: DOI10.1016/j.actamat.2023.119424

2023

B. Ribeiro; A. Vázquez-López; M. Vazquez-Pufleau; M. Llamosí; J. Sempere; J. Yuste; M. Domenech; D.Y. Wang; J.J. Vilatela; J. LLorca; M. Echeverry-Rendón - Control of microbial agents by functionalization of commercial air filters with metal oxide particles. materials chemistry and physics 313, 2023. DOI: doi.org/10.1016/j.matchemphys.2023.128684
Yang, BB, Wang, J, Li, YP, Barnett, M, LLorca, J - Suppressed transformation of compression twins to double twins in Mg by activation of a non-basal slip. scripta materialia 235, 2023. DOI: DOI10.1016/j.scriptamat.2023.115620
Liu. YY; Fernández-Blanco. JP; Yin. GZ; Wang. DY; LLorca. J; Echeverry-Rendón. M - A strategy to tailor the mechanical and degradation properties of PCL-PEG-PCL based copolymers for biomedical application. european polymer journal 198, 2023. DOI: DOI10.1016/j.eurpolymj.2023.112388
Ali, W, Echeverry-Rendon, M, Kopp, A, González, C, LLorca, J - Effect of surface modification on interfacial behaivor in bioabsorbable magnesium wire reinforced poly-lactic acid polymer composites. npj materials degradation 7, 2023. DOI: DOI10.1038/s41529-023-00386-x
Kovacevic, S, Ali, W, Martínez-Paneda, E, LLorca, J - Phase-field modeling of pitting and mechanically-assisted corrosion of Mg alloys for biomedical applications. acta biomaterialia 164, 641-658, 2023. DOI: DOI10.1016/j.actbio.2023.04.011
Shao, W, Guevara-Vela, JM, Fernández-Caballero, A, Liu, S, LLorca, J - Accurate prediction of the solid-state region of the Ni-Al phase diagram including configurational and vibrational entropy and magentic effects. acta materialia 253, 2023. DOI: https://doi.org/10.1016/j.actamat.2023.118962
Meijuan Zhang, Anxin Ma, Javier Llorca - Simulation of dislocation slip and twin propagation in Mg through coupling crystal plasticity and phase field models. mechanics of materials 180, 104608-104608, 2023. DOI: 10.1016/j.mechmat.2023.104608
Mingdi Yu, Yuchi Cui, Jingya Wang, Yiwen Chen, Zhigang Ding, Tao Ying, Javier Llorca, Xiaoqin Zeng - Critical resolved shear stresses for slip and twinning in Mg-Y-Ca alloys and their effect on the ductility. international journal of plasticity 162, 103525-103525, 2023. DOI: 10.1016/j.ijplas.2023.103525
C. Madrona, S. Hong, D. Leec, J. García-Pérez, J. M. Guevara-Vela, R. Bernardo Gavito, A. Mikhalchan, J. Llorca, B. Ku, D. Granados, J. Hwang, J. J. Vilatela - Continuous intercalation compound fibers of bromine wires and aligned CNTs for high-performance conductors. carbon 204, 211-218, 2023. DOI: 10.1016/j.carbon.2022.12.041
W. Shao, S. Liu, J. Llorca - First principles prediction of the Al-Li phase diagram including configurational and vibrational entropic contributions. computational materials science 217, 111898-111898, 2023. DOI: 10.1016/j.commatsci.2022.111898
M. Sarebanzadeh; A. Orozco-Caballero; J. LLorca - Accurate determination of active slip systems for improved geometrical criteria of basal-to-basal slip transfer at grain boundaries in pure Mg. acta materialia 243, 118536-118536, 2023. DOI: 10.1016/j.actamat.2022.118536
Junfeng Cui; Liang Ma; Guoxin Chen; Nan Jiang; Peiling Ke; Yingying Yang; Shiliang Wang; Kazuhito Nishimura; Javier Llorca - Effect of twin boundaries on the strength of body-centered cubic tungsten nanowires. materials science and engineering a-structural materials properties microstructure and processing 862, 143826-143826, 2023. DOI: 10.1016/j.msea.2022.143826

2022

S. Li; J. S. Wróbel; J. LLorca - First-principles analysis of the Al-rich corner of Al-Li-Cu phase diagram. acta materialia 236, 118129-118129, 2022. DOI: doi.org/10.1016/j.actamat.2022.118129
Pascual-Gonzalez, C.; de la Vega, J.; Thompson, C.; Fernandez-Blazquez, J. P.; Herraez-Molinero, D.; Biurrun, N.; Lizarralde, I.; Sánchez del Río, J.; González, C.; LLorca, J. - Processing and mechanical properties of novel biodegradable poly-lactic acid/Zn 3D printed scaffolds for application in tissue regeneration. journal of the mechanical behavior of biomedical materials 132, 105290-105290, 2022. DOI: doi.org/10.1016/j.jmbbm.2022.105290
C. Galera-Rueda, X. Jin, J.Llorca, M. T. Pérez-Prado - Icosahedral quasicrystal enhanced nucleation in commercially pure Ni processed by selective laser melting. scripta materialia 211, 114512-114512, 2022. DOI: 10.1016/j.scriptamat.2022.114512
Raúl Muñoz, Rocío Seltzer, Federico Sket, Carlos González, Javier Llorca - Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation. international journal of impact engineering 165, 104229-104229, 2022. DOI: 10.1016/j.ijimpeng.2022.104229
Santos-Guemes, R.; Segurado, J.; LLorca, J. - A generalized line tension model for precipitate strengthening in metallic alloys. european journal of mechanics a-solids 93, 104540-104540, 2022. DOI: 10.1016/j.euromechsol.2022.104540
Martinez-Alonso, Carmen; Manuel Guevara-Vela, Jose; LLorca, Javier - Understanding the effect of mechanical strains on the catalytic activity of transition metals. physical chemistry chemical physics 8, 24, 4832-4842, 2022. DOI: 10.1039/D1CP05436H
Nieto-Valeiras, E.; Haouala, S.; LLorca, J. - On the effect of slip transfer at grain boundaries on the strength of FCC polycrystals. european journal of mechanics a-solids 91, 104427-104427, 2022. DOI: 10.1016/j.euromechsol.2021.104427
Tourret, D.; Liu, H.; LLorca, J. - Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges. progress in materials science 123, 100810-100810, 2022. DOI: 10.1016/j.pmatsci.2021.100810
Jamali, A.; Ma, A.; LLorca, J. - Influence of grain size and grain boundary misorientation on the fatigue crack initiation mechanisms of textured AZ31 Mg alloy. scripta materialia 207, 114304-114304, 2022. DOI: 10.1016/j.scriptamat.2021.114304

2021

Pascual-Gonzalez, C.; Thompson, C.; de la Vega, J.; Biurrun, N.; Fernandez-Blazquez, J. P.; Lizarralde, I.; Herráez-Molinero, D.; González, C.; LLorca, J. - Processing and properties of PLA/Mg filaments for 3D printing of scaffolds for biomedical applications. rapid prototyping journal , 2021. DOI: 10.1108/RPJ-06-2021-0152
Ali, Wahaaj; Echeverry-Rendon, Monica; Kopp, Alexander; Gonzalez, Carlos; LLorca, Javier - Strength, corrosion resistance and cellular response of interfaces in bioresorbable poly-lactic acid/Mg fiber composites for orthopedic applications. journal of the mechanical behavior of biomedical materials 123, 104781-104781, 2021. DOI: 10.1016/j.jmbbm.2021.104781
Martinez-Alonso, Carmen; Manuel Guevara-Vela, Jose; LLorca, Javier - The effect of elastic strains on the adsorption energy of H, O, and OH in transition metals. physical chemistry chemical physics 23, 21295-21306, 2021. DOI: 10.1039/D1CP03312C
Wang, Jingya; Chen, Yiwen; Chen, Zhe; Llorca, Javier; Zeng, Xiaoqin - Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests. acta materialia 217, 117151-117151, 2021. DOI: 10.1016/j.actamat.2021.117151
Liu, S.; Esteban-Manzanares, G.; LLorca, J. - First Principles Prediction of the Al-Li Phase Diagram. metallurgical and materials transactions a-physical metallurgy and materials science , 2021. DOI: 10.1007/s11661-021-06419-x
Galera-Rueda, C.; Montero-Sistiaga, M. L.; Vanmeensel, K.; Godino-Martinez, M.; Llorca, J.; Pérez-Prado, M.T. - Icosahedral quasicrystal-enhanced nucleation in Al alloys fabricated by selective laser melting. additive manufacturing 44, 102053-102053, 2021. DOI: 10.1016/j.addma.2021.102053
Lopez-Cabanas, I.; LLorca., J.; Gonzalez-Arrabal, R.; Meletis, E.I; Molina-Aldareguia, J.M. - High throughput optimization of hard and tough TiN/Ni nanocomposite coatings by reactive magnetron sputter deposition. surface & coatings technology 418, 127226, 2021. DOI: https://doi.org/10.1016/j.surfcoat.2021.127226
Santos-Güemes, R.; Capolungo, L.; Segurado, J.; Llorca, J. - Dislocation dynamics prediction of the strength of Al-Cu alloys containing shearable θ ′ ′ precipitates. 151, 104375, 2021. DOI: 10.1016/j.jmps.2021.104375
Galera-Rueda, C.; Nieto-Valeiras, E.; Gardon, M.; Pérez-Prado, M.-T.; Llorca, J. - Effect of ZrH2 particles on the microstructure and mechanical properties of IN718 manufactured by selective laser melting. materials science & engineering a 813, 141123, 2021. DOI: 10.1016/j.msea.2021.141123
Zhang, M.; Zhang, H.; Ma, A.; Llorca, J. - Experimental and numerical analysis of cyclic deformation and fatigue behavior of a Mg-RE alloy. international journal of plasticity 139, 102885, 2021. DOI: 10.1016/j.ijplas.2020.102885
Bellón, B.; Boukellal, A.K.; Isensee, T.; Wellborn, O.M.; Trumble, K.P.; Krane, M.J.M.; Titus, M.S.; Tourret, D.; Llorca, J. - Multiscale prediction of microstructure length scales in metallic alloy casting. acta materialia 207, 116686, 2021. DOI: 10.1016/j.actamat.2021.116686
Alizadeh, R.; Wang, J.; LLorca, J. - Precipitate strengthening of pyramidal slip in Mg-Zn alloys. materials science & engineering a Volume 804, 140697, 2021. DOI: 10.1016/j.msea.2020.140697
Li, M.; Benn, F.; Derra, T.; Kröger, N.; Zinser.; Smeets, R.; Molina-Aldareguia, J.; Kopp, A.; Llorca, J. - Microstructure, mechanical properties, corrosion resistance and cytocompatibility of WE43 Mg alloy scaffolds fabricated by laser powder bed fusion for biomedical applications. materials science & engineering: c 119, 111623, 2021. DOI: 10.1016/j.msec.2020.111623
Wang, J.; Xu, G.; Zeng, X.; Llorca, J.; Cui, Y. - Exploring the correlation between solvent diffusion and creep resistance of Mg-Ga HCP alloys from high throughput liquid-solid diffusion couple. materials & design 197, 109243, 2021. DOI: 10.1016/j.matdes.2020.109243
Liu, Z.; Snel, J.; Boll, T.; Wang, J.Y.; Monclús, M.A.; Molina-Aldareguía, J.M.;Llorca, J. - High temperature strength retention of Cu/Nb nanolaminates through dynamic strain ageing. materials science & engineering: a 799, 140117, 2021. DOI: 10.1016/j.msea.2020.140117

2020

Monclús, M. A., Yang, L., López-Cabañas, I., Castillo-Rodríguez, M., Zaman, A., Wang, J., Meletis, E. I., González-Arrabal, R., Llorca, J. and Molina-Aldareguía, J. M. - High temperature mechanical properties and microstructure of hard TaSiN coatings. materials science & engineering: a 797, 139976, 2020. DOI: 10.1016/j.msea.2020.139976
Yang, L.W.; Mayer, C.R.; Chawla, N.; Llorca, J.; Molina-Aldareguía, J.M. - Nanomechanical characterization of the fracture toughness of Al/SiC nanolaminates. extreme mechanics letters 40, 100945, 2020. DOI: 10.1016/j.eml.2020.100945
Liu, S.; Esteban-Manzanares, G.; Llorca, J. - First-principles analysis of precipitation in Mg-Zn alloys. physical review materials 4, 093609, 2020. DOI: 10.1103/physrevmaterials.4.093609
Martinez-Hergueta, F.; Pellegrino, A.; Ridruejo, A.; Petrinic, N.; Gonzalez, C. ;Llorca, J. - Dynamic Tensile Testing of Needle-Punched Nonwoven Fabrics. applied science 10, 2020. DOI: 10.3390
Liu, S.; Martínez, E.; Llorca, J. - Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanics. acta materialia 195, 317-326, 2020. DOI: 10.1016
Van der Giessen, E.; Schultz, P.A.; Bertin, N.; Bulatov, V.V.; Cai, W.; Csányi, G.; Foiles, S.M.; Geers, M.G.D.; González, C.; Hütter, M.; Kyun Kim, W.; Kochmann, D.M.; Llorca, J.; Mattsson, A.E.; Rottler, J.; Shluger, A.; Sills, R.B.; Steinbach, I.; Strachan, A.; Tadmor, E.B. - Roadmap on multiscale materials modeling. modelling and simulation in materials science and engineering 28, 043001, 2020. DOI: 10.1088
Bellon, B.; Haouala, S.; LLorca, J. - An analysis of the influence of the precipitate type on the mechanical behavior of Al – Cu alloys by means of micropillar compression tests. acta materialia 194, 207-223, 2020. DOI: 10.1016
Esteban-Manzanares, G.; Alizadeh, R.; Papadimitriou, I.; Dickel, D.; Barrett, C.D.; Llorca, J. - Atomistic simulations of the interaction of basal dislocations with MgZn precipitates in Mg alloys. materials science & engineering a 788, 139555, 2020. DOI: 10.1016
Zhao, Z.; Bieler, T.R.; LLorca, J.; Eisenlohr, P. - Grain boundary slip transfer classification and metric selection with artificial neural networks. scripta materialia 185, 71-75, 2020. DOI: 10.1016
Santos-Guemes, R.; Bellon, B.; Esteban-Manzanares, G.; Segurado, J.; Capolungo, L.; LLorca, J. - Multiscale modelling of precipitation hardening in Al-Cu alloys: Dislocation dynamics simulations and experimental validation. acta materialia 188, 475-485, 2020. DOI: 10.1016/j.actamat.2020.02.019
J. Wang; J. M. Molina-Aldareguía; J. LLorca - Effect of Al content on the critical resolved shear stress for twin nucleation and growth in Mg alloys. acta materialia 188, 215-227, 2020. DOI: 10.1016/j.actamat.2020.02.006
R. Alizadeh; J. LLorca - Interactions between basal dislocations and beta(1)’ precipitates in Mg-4Zn alloy: Mechanisms and strengthening. acta materialia 186, 475-486, 2020. DOI: 10.1016/j.actamat.2020.01.028
Haouala, S.; Alizadeh, R.; Bieler, T. R.; Segurado, J.; LLorca, J. - Effect of slip transmission at grain boundaries in Al bicrystals. international journal of plasticity 126, 102600-102600, 2020. DOI: 10.1016/j.ijplas.2019.09.006
Esteban-Manzanares, G.; Santos-Guemes, R.; Papadimitriou, I.; Martinez, E.; LLorca, J. - Influence of the stress state on the cross-slip free energy barrier in Al: An atomistic investigation. acta materialia 184, 109-119, 2020. DOI: 10.1016/j.actamat.2019.10.055
R. Alizadeh, M. Peña-Ortega, T. R. Bieler, J. LLorca - A criterion for slip transfer at grain boundaries in Al. scripta materialia 178, 408-412, 2020. DOI: 10.1016/j.scriptamat.2019.12.010
M. Marvi-Mashhadi; C. S. Lopes; J. LLorca - High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams. journal of the mechanics and physics of solids 135-103814, 2020. DOI: 10.1016/j.jmps.2019.103814
Haouala, S.; Lucarini, S.; LLorca, J.; Segurado, J. - Simulation of the Hall-Petch effect in FCC polycrystals by means of strain gradient crystal plasticity and FFT homogenization. journal of the mechanics and physics of solids 134, 103755-103755, 2020. DOI: 10.1016/j.jmps.2019.103755

2019

Esteban-Manzanares, G; Bellon, B; Martinez, E; Papadimitriou, I; LLorca, J - Strengthening of Al-Cu alloys by Guinier-Preston zones: Predictions from atomistic simulations. journal of the mechanics and physics of solids 132, 2019. DOI: 10.1016/j.jmps.2019.07.018
Wang, JY; Zheng, WS; Xu, GL; Llorca, J; Cui, YW - High-throughput extraction of the anisotropic interdiffusion coefficients in hcp Mg-Al alloys. journal of alloys and compounds 805, 237-246, 2019. DOI: 10.1016/j.jallcom.2019.07.084
Esteban-Manzanares, G; Ma, AX; Papadimitriou, I; Martinez, E; LLorca, J - Basal dislocation/precipitate interactions in Mg-Al alloys: an atomistic investigation. modelling and simulation in materials science and engineering 27, 2019. DOI: 10.1088/1361-651X/ab2de0
Liu, ZL; Papadimitriou, I; Castillo-Rodriguez, M; Wang, CY; Esteban-Manzanares, G; Yuan, XM; Tan, HH; Molina-Aldareguia, JM; Llorca, J - Mechanical Behavior of InP Twinning Superlattice Nanowires. nano letters 19, 4490-4497, 2019. DOI: 10.1021/acs.nanolett.9b01300
Pushkareva, M; Sket, F; Segurado, J; Llorca, J; Yandouzi, M; Weck, A - Effect of grain orientation and local strains on void growth and coalescence in titanium. materials science and engineering a-structural materials properties microstructure and processing 760, 258-266, 2019. DOI: 10.1016/j.msea.2019.06.004
Beyerlein, I.; Xu, S.; Llorca, J.; El-Awady, J.; Mianroodi, J.; Svendsen, B. - Alloy design for mechanical properties: Conquering the length scales. computational design and development of alloys 44-4, 257-265, 2019. DOI: 10.1557/mrs.2019.67
Bieler, TR; Alizadeh, R; Pena-Ortega, M; Llorca, J - An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al. international journal of plasticity 118, 269-290, 2019. DOI: 10.1016/j.ijplas.2019.02.014
Liu, H; Papadimitriou, I; Lin, FX; LLorca, J - Precipitation during high temperature aging of Al−Cu alloys: A multiscale analysis based on first principles calculations. acta materialia 167, 121-135, 2019. DOI: 10.1016/j.actamat.2019.01.024
G. Esteban-Manzanares, E. Martínez, J. Segurado, L. Capolungo, J. LLorca. - An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys. acta materialia 162, 189-201, 2019. DOI: 10.1016/j.actamat.2018.09.052
Sadaba, S.; Herraez, M.; Naya, F.; Gonzalez, C.; Llorca, J.; Lopes, C.S. - Special-purpose elements to impose Periodic Boundary Conditions for multiscale computational homogenization of composite materials with the explicit Finite Element Method. composite structures 208, 434-441, 2019. DOI: 10.1016/j.compstruct.2018.10.037
F.Martínez-Hergueta; A.Ridruejo; C.Gonzáleza: J.LLorca - Ballistic performance of hybrid nonwoven/woven polyethyelene fabric shield. international journal of impact engineering 111, 55-65, 2019. DOI: 10.1016/j.ijimpeng.2017.08.011

2018

Segurado, J; Lebensohn, RA; LLorca, J - Computational Homogenization of Polycrystals. advances in applied mechanics 51, 1-114, 2018. DOI: 10.1016/bs.aams.2018.07.001
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - Ballistic performance of hybrid nonwoven/woven polyethylene fabric shields. international journal of impact engineering 111, 55-65, 2018. DOI: 10.1016/j.ijimpeng.2017.08.011
LLorca, Javier - On the quest for the strongest materials. science 360, 264-265, 2018. DOI: 10.1126/science.aat5211
Cruzado, A.; Lucarini, S.; LLorca, J.; Segurado, J. - Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718. international journal of fatigue 113, 236-245, 2018. DOI: 10.1016/j.ijfatigue.2018.04.018
Santos-Guemes, R.; Esteban-Manzanares, G.; Papadimitriou, I.; Segurado, J.; Capolungo, L.; LLorca, J. - Discrete dislocation dynamics simulations of dislocation-theta ‘ precipitate interaction in Al-Cu alloys. journal of the mechanics and physics of solids 118, 228-244, 2018. DOI: 10.1016/j.jmps.2018.05.015
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J. - Effect of anisotropy on the mechanical properties of polyurethane foams: An experimental and numerical study. mechanics of materials 124, 143-154, 2018. DOI: 10.1016/j.mechmat.2018.06.006
Rodriguez-Veiga, A.; Bellon, B.; Papadimitriou, I.; Esteban-Manzanares, G.; Sabirov, I.; LLorca, J. - A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy. journal of alloys and compounds 757, 504-519, 2018. DOI: 10.1016/j.jallcom.2018.04.284
Yang, L. W.; Wang, C. Y.; Monclus, M. A.; Lu, L.; Molina-Aldareguia, J. M.; Llorca, J. - Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu. scripta materialia 154, 54-59, 2018. DOI: 10.1016/j.scriptamat.2018.05.018
Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J. - Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design (vol 91, pg 484, 2016). composites part a-applied science and manufacturing 112, 572-572, 2018. DOI: 10.1016/j.compositesa.2018.05.024
Tan, W.; Naya, F.; Yang, L.; Chang, T.; Falzon, B. G.; Zhan, L.; Molina-Aldareguia, J. M.; Gonzalez, C.; Llorca, J. - The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling. composites part b-engineering 138, 206-221, 2018. DOI: 10.1016/j.compositesb.2017.11.043
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Molina-Aldareguia, J. M.; LLorca, J. - Effect of layer thickness on the mechanical behaviour of oxidation-strengthened Zr/Nb nanoscale multilayers. journal of materials science 53, 5860-5878, 2018. DOI: 10.1007/s10853-017-1665-6
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J. - Surrogate models of the influence of the microstructure on the mechanical properties of closed- and open-cell foams. journal of materials science 53, 12937-12948, 2018. DOI: 10.1007/s10853-018-2598-4
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J. - Modelling of the mechanical behavior of polyurethane foams by means of micromechanical characterization and computational homogenization. international journal of solids and structures 146, 154-166, 2018. DOI: 10.1016/j.ijsolstr.2018.03.026
Haouala, Sarra; Segurado, Javier; LLorca, Javier - An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization. acta materialia 148, 72-85, 2018. DOI: 10.1016/j.actamat.2018.01.024
Yang, L. W.; Mayer, C.; Li, N.; Baldwin, J. K.; Mara, N. A.; Chawla, N.; Molina-Aldareguia, J. M.; Llorca, J. - Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature. acta materialia 142, 37-48, 2018. DOI: 10.1016/j.actamat.2017.09.042
Cruzado, A.; Lucarini, S.; LLorca, J.; Segurado, J. - Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior. international journal of fatigue 107, 40-48, 2018. DOI: 10.1016/j.ijfatigue.2017.10.014
M. A. Monclús; M. Callisti; T. Polcar; L. W. Yang; J. M. Molina-Aldareguía; J. LLorca - Effect of layer thickness on the mechanical behavior of oxidation-strengthened Zr/Nb nanoscale multilayers. journal of materials science 53, 5860-5878 , 2018. DOI: 10.1007/s10853-017-1665-6

2017

Lin, B. C.; Li, X.; Jain, Atul; Wu, M-S; Mier, R.; Herraez, M.; Gonzalez, C.; LLorca, J.; Nutt, S. R. - Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods. sampe journal 53, 32-39, 2017. DOI:
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; Llorca, J. - Numerical simulation of the ballistic response of needle-punched nonwoven fabrics. international journal of solids and structures 106, 56-67, 2017. DOI: 10.1016/j.ijsolstr.2016.11.031
Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier - Fabric compaction and infiltration during vacuum-assisted resin infusion with and without distribution medium. journal of composite materials 51, 687-703, 2017. DOI: 10.1177/0021998316649783
Snel, J.; Monclus, M. A.; Castillo-Rodriguez, M.; Mara, N.; Beyerlein, I. J.; Llorca, J.; Molina-Aldareguia, J. M. - Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness. jom 69, 2214-2226, 2017. DOI: 10.1007/s11837-017-2533-1
Jin, Bo Cheng; Li, Xiaochen; Jain, Atul; Gonzalez, Carlos; LLorca, Javier; Nutt, Steven - Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg. composite structures 174, 389-398, 2017. DOI: 10.1016/j.compstruct.2017.05.002
Naya, F.; Molina-Aldareguia, J. M.; Lopes, C. S.; Gonzalez, C.; Llorca, J. - Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites. jom 69, 13-21, 2017. DOI: 10.1007/s11837-016-2128-2
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Llorca, J.; Molina-Aldareguia, J. M. - Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers. acta materialia 122, 1-10, 2017. DOI: 10.1016/j.actamat.2016.09.021