Publication – Page 2

2024

W. Solórzano-Requejo; A. Martínez Cendrero; A. Alpay Altun; S. Nohut; C. Ojeda; J.G. Mollega; J.M. Molina-Aldareguia; M. Schwentenwein; A.D. Lantada - Topology optimisation and lithography-based ceramic manufacturing of short-stem hip prostheses with enhanced biomechanical and mechanobiological performance. virtual and physical prototyping 19, 2024. DOI: 10.1080/17452759.2024.2387280

2023

M. Taale; B. Schamberger; M.A. Monclús, C. Dolle; F. Taheri; D. Mager; Y.M. Eggeler; J.G. Korvink; J.M. Molina-Aldareguia; C. Selhuber-Unkel; A.D. Lantada; M. Islam - Microarchitected Compliant Scaffolds of Pyrolytic Carbon for 3D Muscle Cell Growth. advanced healthcare materials , 2023. DOI: DOI10.1002/adhm.202303485
Mocerino, D, Bruno, M, Monclus, MA, Gómez, DG, Rueda-Ruiz, M, Molina-Aldareguia, JM, Flores, M, González, C - Characterization of the interface in a fiber-reinforced polymer composite using a novel single-fiber microcantilever test. composites science and technology 242, 2023. DOI: DOI10.1016/j.compscitech.2023.110164
Riu, G, Monclus, MA, Slawik, S, Cinca, N, Tarres, E, Mucklich, F, Llanes, L, Molina-Aldareguia, JM, Guitar, MA, Roa, JJ - Microstructural and mechanical properties at the submicrometric length scale under service-like working conditions on ground WC-Co grades. international journal of refractory metals and hard materials 116, 2023. DOI: DOI10.1016/j.ijrmhm.2023.106359
A. Sierra-Soraluce; G. Li; M.J. Santofimia; J.M. Molina-Aldareguia; A. Smith; M. Muratori; I. Sabirov - Exploring the effect of complex hierarchic microstructure of quenched and partitioned martensitic stainless steels on their high cycle fatigue behaviour. materials & design 233, 2023. DOI: 10.1016/j.matdes.2023.112286
Isacco Mazo, Lia E. Vanzetti, Jon M. Molina-Aldareguia, Alberto Molinari, Vincenzo M. Sglavo - Role of surface carbon nanolayer on the activation of flash sintering in tungsten carbide. international journal of refractory metals and hard materials 111, 106090-106090, 2023. DOI: 10.1016/j.ijrmhm.2022.106090
I. Mazo, J. M. Molina-Aldareguia, A. Molinari, V. M. Sglavo - Room temperature stability, structure and mechanical properties of cubic tungsten carbide in flash sintered products. journal of materials science 58, 1829-1848, 2023. DOI: 10.1007/s10853-022-08109-4
A. Sierra-Soraluce; G. Li; M.J. Santofimia; J.M. Molina-Aldareguia; A. Smith; M. Muratori; I. Sabirov - Effect of microstructure on tensile properties of quenched and partitioned martensitic stainless steels. materials science and engineering: a 864, 2023. DOI: 10.1016/j.msea.2022.144540

2022

Mario Rueda-Ruiz, Ben D. Beake & Jon M. Molina-Aldareguia - Determination of Rate-Dependent Properties in Cohesive Frictional Materials by Instrumented Indentation. jom , 2022. DOI: 10.1007/s11837-022-05268-2
Alejandra Jacobo-Martín, Jaime J. Hernández, Eduardo Solano, Miguel A. Monclús, Juan Carlos Martínez, Daniel F. Fernandes, Patricia Pedraz, Jon M. Molina Aldareguia, Tomas Kubart, Isabel Rodríguez - Resilient moth-eye nanoimprinted antireflective and self-cleaning TiO2 sputter-coated PMMA films. applied surface science 585, 152653-152653, 2022. DOI: 10.1016/j.apsusc.2022.152653
Fernandez-Martinez, I.; Santiago, J. A.; Mendez, A.; Panizo-Laiz, M.; Diaz-Rodriguez, P.; Mendizábal, L.; Díez-Sierra, J.; Zubizarreta, C.; Monclús, M.A.; Molina-Aldareguia, J.M. - Selective Metal Ion Irradiation Using Bipolar HIPIMS: A New Route to Tailor Film Nanostructure and the Resulting Mechanical Properties. coatings 12, 2, 191-191, 2022. DOI: 10.3390/coatings12020191
Chen, Nana; Kou, Hongchao; Wu, Zhihong; Qiang, Fengming; Hua, Ke; Wang, Chuanyun; Tang, Bin; Li, Jinshan; Molina-Aldareguia, J.M. - Design of metastable beta-Ti alloys with enhanced mechanical properties by coupling alpha(S) precipitation strengthening and TRIP effect. materials science and engineering: a 835, 142696-142696, 2022. DOI: 10.1016/j.msea.2022.142696
Zhao, Z.; Ruiz, M. R.; Lu, J.; Monclus, M. A.; Molina-Aldareguia, J. M.; Bieler, T. R.; Eisenlohr, P. - Quantifying the Uncertainty of Critical Resolved Shear Stress Values Derived from Nano-Indentation in Hexagonal Ti Alloys. experimental mechanics , 2022. DOI: 10.1007/s11340-021-00813-7
Xia, P.; Vercruysse, F.; Celada-Casero, C.; Verleysen, P.; Petrov, R. H.; Sabirov, I.; Molina-Aldareguia, J.M.; Smith, A.; Link, B.; Thiessen, R.; Frometa, D.; Parareda, S.; Lara, A. - Effect of alloying and microstructure on formability of advanced high-strength steels processed via quenching and partitioning. materials science and engineering: a 831, 142217-142217, 2022. DOI: 10.1016/j.msea.2021.142217

2021

Li, N.; Wang, C.; Monclus, M. A.; Yang, L.; Molina-Aldareguia, J. M. - Solid solution and precipitation strengthening effects in basal slip, extension twinning and pyramidal slip in Mg-Zn alloys. acta materialia 221, 117374-117374, 2021. DOI: 10.1016/j.actamat.2021.117374
Chen, Nana; Kou, Hongchao; Wu, Zhihong; Qiang, Fengming; Hua, Ke; Fan, Jiangkun, Tang, Bin; Li, Jinshan; Molina-Aldareguia, Jon M. - Microstructural sensitivity and deformation micro-mechanisms of a bimodal metastable beta titanium Ti-7Mo-3Nb-3Cr-3Al alloy. materials science and engineering: a 824, 141821-141821, 2021. DOI: 10.1016/j.msea.2021.141821
Li, Na; Yang, Lingwei; Wang, Chuanyun; Monclus, M. A.; Shi, Dongfeng; Molina-Aldareguía, Jon Mikel - Deformation mechanisms of basal slip, twinning and non-basal slips in Mg-Y alloy by micropillar compression. materials science and engineering: a 819, 141408-141408, 2021. DOI: 10.1016/j.msea.2021.141408
Lopez-Cabanas, I.; LLorca., J.; Gonzalez-Arrabal, R.; Meletis, E.I; Molina-Aldareguia, J.M. - High throughput optimization of hard and tough TiN/Ni nanocomposite coatings by reactive magnetron sputter deposition. surface & coatings technology 418, 127226, 2021. DOI: https://doi.org/10.1016/j.surfcoat.2021.127226
Alvaredo-Olmos, P.; Molina-Aldareguia, J; Vaz-Romero, A.; Prieto, E.; Gonzalez-Julian, J.;Monclús, M.A. - Understanding the Links between the Composition-Processing-Properties in New Formulations of HEAs Sintered by SPS. metals 11, 1-14, 2021. DOI: 10.3390/met11060888
Sapanathan, T.; Sabirov, I.; Xia, P.; Monclús, M.A.; Molina-Aldareguía, J.; Jacques, J.; Simar, A. - High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics. scripta materialia 200, 113910, 2021. DOI: 10.1016/j.scriptamat.2021.113910
Fernández, A.; Santangelo-Muro, M.; Fernández-Blázquez, J.P.; Lopes, C.; Molina-Aldareguia, J.M. - Processing and properties of long recycled-carbon-fibre reinforced polypropylene. composites part b: engineering 211, 108653, 2021. DOI: 10.1016/j.compositesb.2021.108653
Orozco-Caballero, A.;Gutierrez, C.; Gan, B.; Molina-Aldareguia, J.M. - High-throughput nanoindentation mapping of cast IN718 nickel-based superalloys: influence of the Nb concentration. journal of materials research , 2021. DOI: 10.1557/s43578-021-00133-5
Chen, N.; Kou, H.; Wu, Z.; Qiang, F.; Wang, Ch.; Li, J.; Molina-Aldareguia, J. - Stress-induced α″ martensitic phase transformation and martensitic twinning in a metastable β titanium alloy. journal of alloys and compounds 859, 157809, 2021. DOI: 10.1016/j.jallcom.2020.157809
Valencia, F.J..; Santiago, J.; González, R.I. González-Arrabalc, R.; Ruestes, C.; Perez-Díaz, M.; Monclus, M.A.; Molina-Aldareguia, J.; Diaz-Nuñez, P.; Munoz, F.; Kiwi, M.; Perlado, J.M.; Bringaegk, E.M. - Nanoindentation of Amorphous Carbon: a combined experimental and simulation approach. acta materialia 203, 116485, 2021. DOI: 10.1016/j.actamat.2020.116485
Valencia, F.J.; Santiago, J.; González, R.I.; González-Arrabal, R.; Ruestes, C.; Díaz, M.; Monclus, M.A.; Molina-Aldaregui, J.; Diaz-Nuñez, P.; Munoz, F.; Kiwi, M.; Perlado, J.M.; Bringaegk, E.M. - Nanoindentation of Amorphous Carbon: a combined experimental and simulation approach. acta materialia 203, 116485, 2021. DOI: 10.1016/j.actamat.2020.116485
Li, M.; Benn, F.; Derra, T.; Kröger, N.; Zinser.; Smeets, R.; Molina-Aldareguia, J.; Kopp, A.; Llorca, J. - Microstructure, mechanical properties, corrosion resistance and cytocompatibility of WE43 Mg alloy scaffolds fabricated by laser powder bed fusion for biomedical applications. materials science & engineering: c 119, 111623, 2021. DOI: 10.1016/j.msec.2020.111623
Liu, Z.; Snel, J.; Boll, T.; Wang, J.Y.; Monclús, M.A.; Molina-Aldareguía, J.M.;Llorca, J. - High temperature strength retention of Cu/Nb nanolaminates through dynamic strain ageing. materials science & engineering: a 799, 140117, 2021. DOI: 10.1016/j.msea.2020.140117

2020

Monclús, M. A., Yang, L., López-Cabañas, I., Castillo-Rodríguez, M., Zaman, A., Wang, J., Meletis, E. I., González-Arrabal, R., Llorca, J. and Molina-Aldareguía, J. M. - High temperature mechanical properties and microstructure of hard TaSiN coatings. materials science & engineering: a 797, 139976, 2020. DOI: 10.1016/j.msea.2020.139976
Yang, L.W.; Mayer, C.R.; Chawla, N.; Llorca, J.; Molina-Aldareguía, J.M. - Nanomechanical characterization of the fracture toughness of Al/SiC nanolaminates. extreme mechanics letters 40, 100945, 2020. DOI: 10.1016/j.eml.2020.100945
Rueda-Ruiz, M.; Monclús, M. A.; Beake, B.D.; Gálvez, F.; Molina-Aldareguia, J.M - High strain rate compression of epoxy micropillars. extreme mechanics letters 40, 100905, 2020. DOI: 10.1016/j.eml.2020.100905
Rueda-Ruiz, M.; Deakec, B.D.; Molina-Aldareguia, J.M. - New instrumentation and analysis methodology for nano-impact testing. materials & design 192, 108715 - 1-108715 - 12, 2020. DOI: 10.1016
Cepeda-Jiménez, C.C; Potenza, F; Magalini, E; Luchin, V; Molinari, A; Pérez-Prado, M.T. - Effect of energy density on the microstructure and texture evolution of Ti-6Al-4V manufactured by laser powder bed fusion. materials characterization 163, 110238, 2020. DOI: 10.1016/j.matchar.2020.110238
Chen, N.; Molina-Aldareguia, J.; Kou, H.; Qiang, F.; Wu, Z.; Li, J. - Reversion martensitic phase transformation induced {3 3 2}〈1 1 3〉 twinning in metastable β-Ti alloys. materials letters 272, 127883-127883, 2020. DOI: 10.1016/j.matlet.2020.127883
J. Wang; J. M. Molina-Aldareguía; J. LLorca - Effect of Al content on the critical resolved shear stress for twin nucleation and growth in Mg alloys. acta materialia 188, 215-227, 2020. DOI: 10.1016/j.actamat.2020.02.006
E. Fresta; M. A. Monclús; M. Bertz; C. Ezquerro; J. M. Molina‐Aldareguia; J. R. Berenguer; M. Kunimoto; T. Homma; R. D. Costa - Key Ionic Electrolytes for Highly Self‐Stable Light‐Emitting Electrochemical Cells Based on Ir(III) Complexes. advanced optical materials , 2020. DOI: 10.1002/adom.202000295
Valdes-Tabernero, M. A.; Kumar, A.; Petrov, R. H.; Monclus, M. A.; Molina-Aldareguia, J. M. - The sensitivity of the microstructure and properties to the peak temperature in an ultrafast heat treated low carbon-steel. materials science and engineering a-structural materials properties microstructure and processing 776, 138999-138999, 2020. DOI: 10.1016/j.msea.2020.138999

2019

Valdes-Tabernero, MA; Petrov, RH; Monclus, MA; Molina-Aldareguia, JM; Sabirov, I - The effect of soaking time after ultrafast heating on the microstructure and mechanical behavior of a low carbon steel. materials science and engineering a-structural materials properties microstructure and processing 765, 2019. DOI: 10.1016/j.msea.2019.138276
Barnoush, A; Hosemann, P; Molina-Aldareguia, J; Wheeler, JM - In situ small-scale mechanical testing under extreme environments. mrs bulletin 44, 471-477, 2019. DOI: 10.1557/mrs.2019.126
Liu, ZL; Papadimitriou, I; Castillo-Rodriguez, M; Wang, CY; Esteban-Manzanares, G; Yuan, XM; Tan, HH; Molina-Aldareguia, JM; Llorca, J - Mechanical Behavior of InP Twinning Superlattice Nanowires. nano letters 19, 4490-4497, 2019. DOI: 10.1021/acs.nanolett.9b01300
T.Sapanathan; N.Jimenez-Mena: I.Sabirov; M.A.Monclús; J.M.Molina-Aldareguía; P.XiabcL.Zhao; A.Simar - A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by friction melt bonding. journal of materials science & technology 35, 2048-2057, 2019. DOI: 10.1016/j.jmst.2019.05.004
Santiago, J. A.; Fernandez-Martinez, I.; Kozak, T.; Capek, J.; Wennberg, A.; Molina-Aldareguia, J. M.; Bellido-Gonzalez, V.; Gonzalez-Arrabal, R.; Monclus, M. A. - The influence of positive pulses on HiPIMS deposition of hard DLC coatings. surface & coatings technology 358-49, 2019. DOI: 10.1016/j.surfcoat.2018.11.001

2018

Yang, L. W.; Wang, C. Y.; Monclus, M. A.; Lu, L.; Molina-Aldareguia, J. M.; Llorca, J. - Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu. scripta materialia 154, 54-59, 2018. DOI: 10.1016/j.scriptamat.2018.05.018
Santiago, J. A.; Fernandez-Martinez, I.; Wennberg, A.; Molina-Aldareguia, J. M.; Castillo-Rodriguez, M.; Rojas, T. C.; Sanchez-Lopez, J. C.; Gonzalez, M. U.; Garcia-Martin, J. M.; Li, H.; Bellido-Gonzalez, V.; Monclus, M. A.; Gonzalez-Arrabal, R. - Adhesion enhancement of DLC hard coatings by HiPIMS metal ion etching pretreatment. surface & coatings technology 349, 787-796, 2018. DOI: 10.1016/j.surfcoat.2018.04.090
Xia, Peikang; Sabirov, Ilchat; Molina-Aldareguia, Jon; Verleysen, Patricia; Petrov, Roumen - Mechanical behavior and microstructure evolution of a quenched and partitioned steel during drop weight impact and punch testing. materials science and engineering a-structural materials properties microstructure and processing 737, 18-26, 2018. DOI: 10.1016/j.msea.2018.09.015
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Molina-Aldareguia, J. M.; LLorca, J. - Effect of layer thickness on the mechanical behaviour of oxidation-strengthened Zr/Nb nanoscale multilayers. journal of materials science 53, 5860-5878, 2018. DOI: 10.1007/s10853-017-1665-6
Valdes-Tabernero, M. A.; Vercruysse, F.; Sabirov, I.; Petrov, R. H.; Monclus, M. A.; Molina-Aldareguia, J. M. - Effect of Ultrafast Heating on the Properties of the Microconstituents in a Low-Carbon Steel. metallurgical and materials transactions a-physical metallurgy and materials science 49A, 3145-3150, 2018. DOI: 10.1007/s11661-018-4658-4
Boltynjuk, E. V.; Gunderov, D. V.; Ubyivovk, E. V.; Monclus, M. A.; Yang, L. W.; Molina-Aldareguia, J. M.; Tyurin, A. I.; Kilmametov, A. R.; Churakova, A. A.; Churyumov, A. Yu.; Valiev, R. Z. - Enhanced strain rate sensitivity of Zr-based bulk metallic glasses subjected to high pressure torsion. journal of alloys and compounds 747, 595-602, 2018. DOI: 10.1016/j.jallcom.2018.03.018
Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon - Slip transfer across gamma-TiAl lamellae in tension. materials & design 146, 81-95, 2018. DOI: 10.1016/j.matdes.2018.02.072
Tan, W.; Naya, F.; Yang, L.; Chang, T.; Falzon, B. G.; Zhan, L.; Molina-Aldareguia, J. M.; Gonzalez, C.; Llorca, J. - The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling. composites part b-engineering 138, 206-221, 2018. DOI: 10.1016/j.compositesb.2017.11.043
Yang, L. W.; Mayer, C.; Li, N.; Baldwin, J. K.; Mara, N. A.; Chawla, N.; Molina-Aldareguia, J. M.; Llorca, J. - Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature. acta materialia 142, 37-48, 2018. DOI: 10.1016/j.actamat.2017.09.042
M. A. Monclús; M. Callisti; T. Polcar; L. W. Yang; J. M. Molina-Aldareguía; J. LLorca - Effect of layer thickness on the mechanical behavior of oxidation-strengthened Zr/Nb nanoscale multilayers. journal of materials science 53, 5860-5878 , 2018. DOI: 10.1007/s10853-017-1665-6

2017

Yang, L. W.; Liu, H. T.; Jiang, R.; Sun, X.; Mao, W. G.; Cheng, H. F.; Molina-Aldareguia, J. M. - Weak interface dominated high temperature fracture strength of carbon fiber reinforced mullite matrix composites. journal of the european ceramic society 37, 2991-2996, 2017. DOI: 10.1016/j.jeurceramsoc.2017.03.033
Medina, Carlos; Fernandez, Eduardo; Salas, Alexis; Naya, Fernando; Molina-Aldereguia, Jon; Melendrez, Manuel F.; Flores, Paulo - Multiscale Characterization of Nanoengineered Fiber-Reinforced Composites: Effect of Carbon Nanotubes on the Out-of-Plane Mechanical Behavior. journal of nanomaterials , 2017. DOI: 10.1155/2017/9809702
Cepeda-Jimenez, C. M.; Castillo-Rodriguez, M.; Molina-Aldareguia, J. M.; Huang, Y.; Langdon, T. G.; Perez-Prado, M. T. - Controlling the high temperature mechanical behavior of Al alloys by precipitation and severe straining. materials science and engineering a-structural materials properties microstructure and processing 679, 36-47, 2017. DOI: 10.1016/j.msea.2016.10.026
Hernandez, Jaime J.; Monclus, Miguel A.; Navarro-Baena, Ivan; Viela, Felipe; Molina-Aldareguia, Jon M.; Rodriguez, Isabel - Multifunctional Nano-engineered Polymer Surfaces with Enhanced Mechanical Resistance and Superhydrophobicity. scientific reports 7, 2017. DOI: 10.1038/srep43450
Snel, J.; Monclus, M. A.; Castillo-Rodriguez, M.; Mara, N.; Beyerlein, I. J.; Llorca, J.; Molina-Aldareguia, J. M. - Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness. jom 69, 2214-2226, 2017. DOI: 10.1007/s11837-017-2533-1
Naya, F.; Molina-Aldareguia, J. M.; Lopes, C. S.; Gonzalez, C.; Llorca, J. - Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites. jom 69, 13-21, 2017. DOI: 10.1007/s11837-016-2128-2
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Llorca, J.; Molina-Aldareguia, J. M. - Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers. acta materialia 122, 1-10, 2017. DOI: 10.1016/j.actamat.2016.09.021
Palomares-Garcia, A. J.; Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M. - Effect of nanoscale thick lamellae on the micromechanical response of a TiAl alloy. scripta materialia 139, 17-21, 2017. DOI: 10.1016/j.scriptamat.2017.06.002
Liu, H. T.; Yang, L. W.; Han, S.; Cheng, H. F.; Mao, W. G.; Molina-Aldareguia, J. M. - Interface controlled micro- and macro- mechanical properties of aluminosilicate fiber reinforced SiC matrix composites. journal of the european ceramic society 37, 883-890, 2017. DOI: 10.1016/j.jeurceramsoc.2016.10.003
Gonzalez, C.; Vilatela, J. J.; Molina-Aldareguia, J. M.; Lopes, C. S.; LLorca, J. - Structural composites for multifunctional applications: Current challenges and future trends. progress in materials science 89, 194-251, 2017. DOI: 10.1016/j.pmatsci.2017.04.005
Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon - Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression. acta materialia 123, 102-114, 2017. DOI: 10.1016/j.actamat.2016.10.034
L. W. Yang, H. T. Liu, R. Jiang, X. Sun, W. G. Mao, H. F. Cheng, and J. M. MolinaAldareguia - Weak interface dominated high temperature fracture strength of carbon fiber reinforced mullite matrix composites. journal of the european ceramic society 37, 2991-2996, 2017. DOI: 10.1016/j.jeurceramsoc.2017.03.033

2016

Fernandez-Martinez, Ivan; Antonio Santiago, Jose; Bellido-Gonzalez, Victor; Monclus, Miguel; Molina, Jon; Gonzalez-Arrabal, Raquel; Papa, Frank; Wennberg, Ambiorn - Tribo-Mechanical Properties of Hard Hydrogen-Free Diamond-Like Carbon Coatings Prepared by Magnetron Sputtering. society of vacuum coaters 59th annual technical conference proceedings, 2016 , 126-131, 2016. DOI: 10.14332/svc16.proc.0038
Chang, Hyung-Jun; Segurado, Javier; Molina-Aldareguia, Jon M.; Soler, Rafael; LLorca, Javier - A 3D dislocation dynamics analysis of the size effect on the strength of [111] LiF micropillars at 300K and 600K. modelling and simulation in materials science and engineering 24, 2016. DOI: 10.1088/0965-0393/24/3/035009
Sket, F.; Enfedaque, A.; Diaz Lopez, C.; Gonzalez, C.; Molina-Aldareguia, J.; LLorca, J. - X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear. composites science and technology 133, 40-50, 2016. DOI: 10.1016/j.compscitech.2016.06.012
Mora-Sanchez, H.; Sabirov, I.; Monclus, M. A.; Matykina, E.; Molina-Aldareguia, J. M. - Ultra-fine grained pure Titanium for biomedical applications. materials technology 31, 756-771, 2016. DOI: 10.1080/10667857.2016.1238131
Mayer, Carl R.; Molina-Aladareguia, Jon; Chawla, Nikhilesh - Three dimensional (3D) microstructure-based finite element modeling of Al-SiC nanolaminates using focused ion beam (FIB) tomography. materials characterization 120, 369-376, 2016. DOI: 10.1016/j.matchar.2016.09.023
Yang, L. W.; Mayer, C.; Chawla, N.; Llorca, J.; Molina-Aldareguia, J. M. - Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature. philosophical magazine 96, 3336-3355, 2016. DOI: 10.1080/14786435.2016.1219075
Mayer, C.; Yang, L. W.; Singh, S. S.; Xie, H.; Shen, Y. -L.; Llorca, J.; Molina-Aldareguia, J.; Chawla, N. - Orientation dependence of indentation behavior in Al-SiC nanolaminate composites. materials letters 168, 129-133, 2016. DOI: 10.1016/j.matlet.2016.01.049
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T. - EBSD-Assisted Slip Trace Analysis During In Situ SEM Mechanical Testing: Application to Unravel Grain Size Effects on Plasticity of Pure Mg Polycrystals. jom 68, 116-126, 2016. DOI: 10.1007/s11837-015-1521-6
de Diego-Calderon, I.; Sabirov, I.; Molina-Aldareguia, J. M.; Fojer, C.; Thiessen, R.; Petrov, R. H. - Microstructural design in quenched and partitioned (Q&P) steels to improve their fracture properties. materials science and engineering a-structural materials properties microstructure and processing 657, 136-146, 2016. DOI: 10.1016/j.msea.2016.01.011
Molina-Mendoza, Aday J.; Moya, Alicia; Frisenda, Riccardo; Svatek, Simon A.; Gant, Patricia; Gonzalez-Abad, Sergio; Antolin, Elisa; Agrait, Nicolas; Rubio-Bollinger, Gabino; Perez de lara, David; Vilatela, Juan J.; Castellanos-Gomez, Andres - Highly responsive UV-photodetectors based on single electrospun TiO2 nanofibres. journal of materials chemistry c 4, 10707-10714, 2016. DOI: 10.1039/c6tc02344d
Guo, Wei; Gan, Bin; Molina-Aldareguia, Jon M.; Poplawsky, Jonathan D.; Raabe, Dierk - Structure and dynamics of shear bands in amorphous-crystalline nanolaminates. scripta materialia 110, 28-32, 2016. DOI: 10.1016/j.scriptamat.2015.07.038
Mayer, C. R.; Yang, L. W.; Singh, S. S.; Llorca, J.; Molina-Aldareguia, J. M.; Shen, Y. L.; Chawla, N. - Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites. acta materialia 114, 25-32, 2016. DOI: 10.1016/j.actamat.2016.05.018
Medina M, Carlos; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Melendrez, Manuel F.; Flores, Paulo; LLorca, Javier - Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. journal of composite materials 50, 1651-1659, 2016. DOI: 10.1177/0021998315595115
Liu, H. T.; Yang, L. W.; Sun, X.; Cheng, H. F.; Wang, C. Y.; Mao, W. G.; Molina-Aldareguia, J. M. - Enhancing the fracture resistance of carbon fiber reinforced SiC matrix composites by interface modification through a simple fiber heat-treatment process. carbon 109, 435-443, 2016. DOI: 10.1016/j.carbon.2016.08.047
Wan, Jintao; Zhao, Jianqing; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Zhao, Ying; Pan, Ye-Tang; Wang, De-Yi - Ultrastiff Biobased Epoxy Resin with High T-g and Low Permittivity: From Synthesis to Properties. acs sustainable chemistry & engineering 4, 2869-2880, 2016. DOI: 10.1021/acssuschemeng.6b00479
Wan, Jintao; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Kalali, Ehsan Naderi; Wang, Xin; Wang, De-Yi - A sustainable, eugenol-derived epoxy resin with high biobased content, modulus, hardness and low flammability: Synthesis, curing kinetics and structure-property relationship. chemical engineering journal 284, 1080-1093, 2016. DOI: 10.1016/j.cej.2015.09.031

2015

Sket, Federico; Fernandez, Ana; Jerusalem, Antoine; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria - Effect of Hydrostatic Pressure on the 3D Porosity Distribution and Mechanical Behavior of a High Pressure Die Cast Mg AZ91 Alloy. metallurgical and materials transactions a-physical metallurgy and materials science 46A, 4056-4069, 2015. DOI: 10.1007/s11661-015-3024-z
Mayer, Carl R.; Lotfian, Saeid; Molina-Aldareguia, Jon; Chawla, Nikhilesh - High-Temperature Micropillar Compression Creep Testing of Constituent Phases in Lead-Free Solder. advanced engineering materials 17, 1168-1174, 2015. DOI: 10.1002/adem.201500089
De Diego-Calderon, Irene; De Knijf, Dorien; Molina-Aldareguia, Jon M.; Sabirov, Ilchat; Fojer, Cecilia; Petrov, Roumen - Effect of Q&P parameters on microstructure development and mechanical behaviour of Q&P steels. revista de metalurgia 51, 2015. DOI: 10.3989/revmetalm.035
Sket, F.; Rodriguez-Hortala, M.; Molina-Aldareguia, J. M.; Llorca, J.; Maire, E.; Requena, G. - In situ tomographic investigation of damage development in +/- 45 degrees carbon fibre reinforced laminates. materials science and technology 31, 587-593, 2015. DOI: 10.1179/1743284714Y.0000000561
Frontini, P.; Lotfian, S.; Monclus, M. A.; Molina-Aldareguia, J. M. - High Temperature Nanoindentation Response of RTM6 Epoxy Resin at Different Strain Rates. experimental mechanics 55, 851-862, 2015. DOI: 10.1007/s11340-015-9985-4
Wu, L.; Sket, F.; Molina-Aldareguia, J. M.; Makradi, A.; Adam, L.; Doghri, I.; Noels, L. - A study of composite laminates failure using an anisotropic gradient-enhanced damage mean-field homogenization model. composite structures 126, 246-264, 2015. DOI: 10.1016/j.compstruct.2015.02.070
Matykina, E.; Arrabal, R.; Valiev, R. Z.; Molina-Aldareguia, J. M.; Belov, P.; Sabirov, I. - Electrochemical Anisotropy of Nanostructured Titanium for Biomedical Implants. electrochimica acta 176, 1221-1232, 2015. DOI: 10.1016/j.electacta.2015.07.128
Vigueras, Guillermo; Sket, Federico; Samaniego, Cristobal; Wu, Ling; Noels, Ludovic; Tjahjanto, Denny; Casoni, Eva; Houzeaux, Guillaume; Makradi, Ahmed; Molina-Aldareguia, Jon M.; Vazquez, Mariano; Jerusalem, Antoine - An XFEM/CZM implementation for massively parallel simulations of composites fracture. composite structures 125, 542-557, 2015. DOI: 10.1016/j.compstruct.2015.01.053
Sanchez-Martin, R.; Zambaldi, C.; Perez-Prado, M. T.; Molina-Aldareguia, J. M. - High temperature deformation mechanisms in pure magnesium studied by nanoindentation. scripta materialia 104, 9-12, 2015. DOI: 10.1016/j.scriptamat.2015.03.012
de Diego-Calderon, I.; De Knijf, D.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sabirov, I.; Foejer, C.; Petrov, R. H. - Global and local deformation behavior and mechanical properties of individual phases in a quenched and partitioned steel. materials science and engineering a-structural materials properties microstructure and processing 630, 27-35, 2015. DOI: 10.1016/j.msea.2015.01.077
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Carreno, F.; Perez-Prado, M. T. - Prominent role of basal slip during high-temperature deformation of pure Mg polycrystals. acta materialia 85, 1-13, 2015. DOI: 10.1016/j.actamat.2014.11.013
Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Molina-Aldareguia, J. M. - Effect of indentation size on the nucleation and propagation of tensile twinning in pure magnesium. acta materialia 93, 114-128, 2015. DOI: 10.1016/j.actamat.2015.04.005
de Diego-Calderon, I.; Rodriguez-Calvillo, P.; Lara, A.; Molina-Aldareguia, J. M.; Petrov, R. H.; De Knijf, D.; Sabirov, I. - Effect of microstructure on fatigue behavior of advanced high strength steels produced by quenching and partitioning and the role of retained austenite. materials science and engineering a-structural materials properties microstructure and processing 641, 215-224, 2015. DOI: 10.1016/j.msea.2015.06.034
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T. - Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium. acta materialia 88, 232-244, 2015. DOI: 10.1016/j.actamat.2015.01.032
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T. - Effect of grain size on slip activity in pure magnesium polycrystals. acta materialia 84, 443-456, 2015. DOI: 10.1016/j.actamat.2014.10.001
Wan, Jintao; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Li, Zhi; Wang, Xin; Wang, De-Yi - A novel biobased epoxy resin with high mechanical stiffness and low flammability: synthesis, characterization and properties. journal of materials chemistry a 3, 21907-21921, 2015. DOI: 10.1039/c5ta02939b

2014

Cruzado, A.; Gan, B.; Chang, H.; Ostolaza, K.; Linaza, A.; Milenkovic, S.; Molina-Aldareguia, J. M.; Llorca, J.; Segurado, J. - MICROTESTING AND CRYSTAL PLASTICITY MODELLING OF IN718 SUPERALLOY GRAINS. 8th international symposium on superalloy 718 and derivatives , 897-907, 2014. DOI: 10.1002/9781119016854.ch71
Alvarez-Fraga, L.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sanchez-Garcia, J. A.; Cespedes, E.; Escobar-Galindo, R.; Prieto, C. - Influence of the IR-mirror layer composition in the mechanical properties of solar selective coatings made from Mo:Si3N4 cermet. thin solid films 571, 316-320, 2014. DOI: 10.1016/j.tsf.2014.05.069
Alberto Monclus, Miguel; Lotfian, Saeid; Mikel Molina-Aldareguia, Jon - Tip Shape Effect on Hot Nanoindentation Hardness and Modulus Measurements. international journal of precision engineering and manufacturing 15, 1513-1519, 2014. DOI: 10.1007/s12541-014-0499-2
Molinari, A.; Bisoffi, E.; Menapace, C.; Torralba, J. - Shrinkage kinetics during early stage sintering of cold isostatically compacted iron powder. powder metallurgy 57, 61-69, 2014. DOI: 10.1179/1743290113Y.0000000068
Lotfian, S.; Mayer, C.; Chawla, N.; Llorca, J.; Misra, A.; Baldwin, J. K.; Molina-Aldareguia, J. M. - Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates. thin solid films 571, 260-267, 2014. DOI: 10.1016/j.tsf.2014.06.022