Publication

    2014

  • Cui, Yuwen; Torralba, Jose M.; Lu, Xiao-Gang - International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control Foreword. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 1693-1693, 2014. DOI: 10.1007/s11661-014-2223-3
  • Sklenard, B.; Batude, P.; Pasini, L.; Fenouillet-Beranger, C.; Previtali, B.; Casse, M.; Brunet, L.; Rivallin, P.; Barbe, J-C.; Tavernier, C.; Cristoloveanu, S.; Vinet, M.; Martin-Bragado, I. - Low temperature junction formation by Solid Phase Epitaxy on thin film devices: atomistic modeling and experimental achievements. 2014 international workshop on junction technology (iwjt) , 33-38, 2014. DOI: 10.1109/IWJT.2014.6842024
  • Milenkovic, S.; Rahimian, M.; Sabirov, I.; Maestro, L. - Effect of solidification parameters on the secondary dendrite arm spacing in MAR M-247 superalloy determined by a novel approach. eurosuperalloys 2014 - 2nd european symposium on superalloys and their applications 14, 2014. DOI: 10.1051/matecconf/20141413004
  • Martinez-Hergueta, Francisca; Galvez, Francisco; Gonzalez, Carlos - INFLUENCE OF THE FIBER ALIGNMENT IN THE BALLISTIC PERFORMANCE OF DYNEEMA NON-WOVEN FABRICS. 28th international symposium on ballistics, vols 1 and 2 , 931-941, 2014. DOI:
  • Sabirov, I.; Enikeev, N.; Kazykhanov, V.; Valiev, R.; Murashkin, M. - Ultra-fine grained Al-Mg alloys with superior strength via physical simulation. 6th international conference on nanomaterials by severe plastic deformation (nanospd6) 63, 2014. DOI: 10.1088/1757-899X/63/1/012042
  • Gomez-Selles, J. L.; Darby, B. L.; Jones, K. S.; Martin-Bragado, I. - Lattice kinetic Monte Carlo modeling of germanium solid phase epitaxial growth. physica status solidi c: current topics in solid state physics, vol 11, no 1 11, 93-96, 2014. DOI: 10.1002/pssc.201300159
  • Varona-Caballero, A.; Milenkovic, S.; Jabbari-Taleghani, M. A.; Monge, M. A. - Mechanical alloying and field assisted hot pressing of nanocrystalline B2-NiAl intermetallic compound. powder metallurgy 57, 212-219, 2014. DOI: 10.1179/1743290114Y.0000000099
  • Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M. - Mechanical and functional properties of Invar alloy for mu-MIM. powder metallurgy 57, 127-136, 2014. DOI: 10.1179/1743290113Y.0000000081
  • Rahimian, Mehdi; Milenkovic, Srdjan; Sabirov, Ilchat - A physical simulation study of the effect of thermal variations on the secondary dendrite arm spacing in a Ni-based superalloy. philosophical magazine letters 94, 86-94, 2014. DOI: 10.1080/09500839.2013.870670
  • Chao, Qi; Beladi, Hossein; Sabirov, Ilchat; Hodgson, Peter D. - Deformation behaviour of a commercial pure titanium alloy during hot compression testing. advances in materials and processing technologies xv 773-774, 281-286, 2014. DOI: 10.4028/www.scientific.net/MSF.773-774.281
  • Cui, Yuwen; Xu, Guanglong; Chen, Yi; Tang, Bin; Li, Jinshan; Zhou, Lian - Computational diffusion kinetics and its applications in study and design of rare metallic materials. chinese science bulletin 59, 1672-1683, 2014. DOI: 10.1007/s11434-014-0127-7
  • Dopico, Ignacio; Castrillo, Pedro; Martin-Bragado, Ignacio - Modeling of boron diffusion in silicon-germanium alloys using Kinetic Monte Carlo. solid-state electronics 93, 61-65, 2014. DOI: 10.1016/j.sse.2013.12.007
  • Alvarez-Fraga, L.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sanchez-Garcia, J. A.; Cespedes, E.; Escobar-Galindo, R.; Prieto, C. - Influence of the IR-mirror layer composition in the mechanical properties of solar selective coatings made from Mo:Si3N4 cermet. thin solid films 571, 316-320, 2014. DOI: 10.1016/j.tsf.2014.05.069
  • Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Rivallin, Pierrette; Tavernier, Clement; Cristoloveanu, Sorin; Martin-Bragado, Ignacio - Atomistic investigation of the impact of stress during solid phase epitaxial regrowth. physica status solidi c: current topics in solid state physics, vol 11, no 1 11, 97-100, 2014. DOI: 10.1002/pssc.201300166
  • Solanas, Concepcion; Herrero, Sara; Dasari, Aravind; Plaza, Gustavo R.; Llorca, Javier; Perez-Rigueiro, Jose; Elices, Manuel; Guinea, Gustavo V. - Insights into the production and characterization of electrospun fibers from regenerated silk fibroin. european polymer journal 60, 123-134, 2014. DOI: 10.1016/j.eurpolymj.2014.08.030
  • Drensler, Stefanie; Milenkovic, Srdjan; Hassel, Achim Walter - Microvials with tungsten nanowire arrays. journal of solid state electrochemistry 18, 2955-2961, 2014. DOI: 10.1007/s10008-014-2528-6
  • Lee, Dong-Wook; Xu, Guanglong; Cui, Yuwen - Landau model of the microstructure and shape memory properties of cubic-monoclinic-II martensite. scripta materialia 90-91, 2-5, 2014. DOI: 10.1016/j.scriptamat.2014.06.017
  • Basu, Debdipta; Das, Amit; George, Jinu Jacob; Wang, De-Yi; Stoekelhuber, Klaus Werner; Wagenknecht, Udo; Leuteritz, Andreas; Kutlu, Burak; Reuter, Uta; Heintrich, Gert - UNMODIFIED LDH AS REINFORCING FILLER FOR XNBR AND THE DEVELOPMENT OF FLAME-RETARDANT ELASTOMER COMPOSITES. rubber chemistry and technology 87, 606-616, 2014. DOI: 10.5254/rct.14.86920
  • Oro, Raquel; Hryha, Eduard; Campos, Monica; Torralba, Jose M. - Effect of processing conditions on microstructural features in Mn-Si sintered steels. materials characterization 95, 105-117, 2014. DOI: 10.1016/j.matchar.2014.06.011
  • Zhang, Xiao-Fang; Xu, Cun-Jin; Wan, Jintao - Mono- and dinuclear europium(III) complexes with thenoyltrifluoroacetone and 1,10-phenanthroline-5,6-dione. monatshefte fur chemie 145, 1913-1917, 2014. DOI: 10.1007/s00706-014-1282-x
  • Yang, Guang; Milenkovic, Srdjan - Microstructure evolution and mechanical behavior of as-cast, heat treated and directionally solidified Fe-15Al-10Nb alloys. intermetallics 55, 129-137, 2014. DOI: 10.1016/j.intermet.2014.06.016
  • Garcia-Rodriguez, N.; Campos, M.; Torralba, J. M.; Berger, M. H.; Bienvenu, Y. - Capability of mechanical alloying and SPS technique to develop nanostructured high Cr, Al alloyed ODS steels. materials science and technology 30, 1676-1684, 2014. DOI: 10.1179/1743284714Y.0000000595
  • Abajo, C.; Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M. - Optimisation of eco-friendly binary binder system for powder injection moulding. powder metallurgy 57, 196-203, 2014. DOI: 10.1179/1743290114Y.0000000089
  • Srinivasarao, B.; Torralba, J. M.; Taleghani, M. A. Jabbari; Perez-Prado, M. T. - Very strong pure titanium by field assisted hot pressing of dual phase powders. materials letters 123, 75-78, 2014. DOI: 10.1016/j.matlet.2014.02.086
  • Torralba, Jose M.; Campos, Monica - Toward high performance in Powder Metallurgy. revista de metalurgia 50, 2014. DOI: 10.3989/revmetalm.017
  • Milenkovic, Srdjan; Rahimian, Mehdi; Sabirov, Ilchat - A Novel High-throughput Technique for Establishing the Solidification-Microstructure Relationships. metallurgical and materials transactions b-process metallurgy and materials processing science 45, 482-488, 2014. DOI: 10.1007/s11663-013-9846-4
  • Campos, Monica; Antonio Sicre-Artalejo, Jose; Manuel Torralba, Jose; Zbiral, Hannes; Danninger, Herbert; Pena, P. - Degradation of alumina refractory bricks by sintering Mn low-alloy steels. ceramics international 40, 3063-3070, 2014. DOI: 10.1016/j.ceramint.2013.09.140
  • Renversade, Loic; Ruoff, Herbert; Maile, Karl; Sket, Federico; Borbely, Andras - Microtomographic assessment of damage in P91 and E911 steels after long-term creep. international journal of materials research 105, 621-627, 2014. DOI: 10.3139/146.111056
  • Zographos, Nikolas; Martin-Bragado, Ignacio - Process modeling of stress and chemical effects in SiGe alloys using kinetic Monte Carlo. journal of computational electronics 13, 59-69, 2014. DOI: 10.1007/s10825-013-0489-0
  • Molinari, A.; Bisoffi, E.; Menapace, C.; Torralba, J. - Shrinkage kinetics during early stage sintering of cold isostatically compacted iron powder. powder metallurgy 57, 61-69, 2014. DOI: 10.1179/1743290113Y.0000000068
  • Bobruk, E.; Sabirov, I.; Kazykhanov, V.; Valiev, R.; Murashkin, M. - Microstructure features and mechanical properties of a UFG Al-Mg-Si alloy produced via SPD. 6th international conference on nanomaterials by severe plastic deformation (nanospd6) 63, 2014. DOI: 10.1088/1757-899X/63/1/012116
  • Polyakov, Alexander; Gunderov, Dmitry; Sitdikov, Vil'; Valiev, Ruslan; Semenova, Irina; Sabirov, Ilchat - Physical Simulation of Hot Rolling of Ultra-fine Grained Pure Titanium. metallurgical and materials transactions b-process metallurgy and materials processing science 45, 2315-2326, 2014. DOI: 10.1007/s11663-014-0133-9
  • Alberto Monclus, Miguel; Lotfian, Saeid; Mikel Molina-Aldareguia, Jon - Tip Shape Effect on Hot Nanoindentation Hardness and Modulus Measurements. international journal of precision engineering and manufacturing 15, 1513-1519, 2014. DOI: 10.1007/s12541-014-0499-2
  • Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T. - Control of the Mechanical Asymmetry in an Extruded MN11 Alloy by Static Annealing. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 3282-3291, 2014. DOI: 10.1007/s11661-013-2169-x
  • Lu, Xiao-Gang; Wang, Zhuo; Cui, Yuwen; Jin, Zhanpeng - Computational thermodynamics, computational kinetics, and materials design. chinese science bulletin 59, 1662-1671, 2014. DOI: 10.1007/s11434-014-0219-4
  • Dunn, Aaron; Agudo-Merida, Laura; Martin-Bragado, Ignacio; McPhie, Mathieu; Cherkaoui, Mohammed; Capolungo, Laurent - A novel method for computing effective diffusivity: Application to helium implanted alpha-Fe thin films. journal of nuclear materials 448, 195-205, 2014. DOI: 10.1016/j.jnucmat.2014.01.039
  • Hidalgo-Manrique, P.; Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Ruano, O. A.; Carreno, F. - Role of particles on microstructure and mechanical properties of the severely processed 7075 aluminium alloy. journal of materials science 49, 833-841, 2014. DOI: 10.1007/s10853-013-7767-x
  • Torralba, J. M.; Esteban, L.; Bernardo, E.; Campos, M. - Understanding contribution of microstructure to fracture behaviour of sintered steels. powder metallurgy 57, 357-364, 2014. DOI: 10.1179/1743290114Y.0000000119
  • Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Garcia-Infanta, J. M.; Zhilyaev, A. P.; Ruano, O. A.; Carreno, F. - Assessment of homogeneity of the shear-strain pattern in Al-7 wt%Si casting alloy processed by high-pressure torsion. materials science and engineering a-structural materials properties microstructure and processing 597, 102-110, 2014. DOI: 10.1016/j.msea.2013.12.072
  • Munoz-Moreno, R.; Ruiz-Navas, E. M.; Boehlert, C. J.; Llorca, J.; Torralba, J. M.; Perez-Prado, M. T. - Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at%)-0.8 vol%TiB2 alloy by high temperature in situ mechanical testing. materials science and engineering a-structural materials properties microstructure and processing 606, 276-289, 2014. DOI: 10.1016/j.msea.2014.03.078
  • Yue, H. -B.; Fernandez-Blazquez, J. P.; Shuttleworth, P. S.; Cui, Y. -D.; Ellis, G. - Thermomechanical relaxation and different water states in cottonseed protein derived bioplastics. rsc advances 4, 32320-32326, 2014. DOI: 10.1039/c4ra01794c
  • Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M. - Water soluble Invar 36 feedstock development for mu PIM. journal of materials processing technology 214, 436-444, 2014. DOI: 10.1016/j.jmatprotec.2013.09.014
  • Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier - A level set approach for the analysis of flow and compaction during resin infusion in composite materials. composites part a-applied science and manufacturing 67, 299-307, 2014. DOI: 10.1016/j.compositesa.2014.09.002
  • Chakkedath, Ajith; Bohlen, Jan; Yi, Sangbong; Letzig, Dietmar; Chen, Zhe; Boehlert, Carl J. - The Effect of Nd on the Tension and Compression Deformation Behavior of Extruded Mg-1Mn (wt pct) at Temperatures Between 298 K and 523 K (25 A degrees C and 250 A degrees C). metallurgical and materials transactions a-physical metallurgy and materials science 45A, 3254-3274, 2014. DOI: 10.1007/s11661-013-2143-7
  • Jabbari-Taleghani, M. A.; Torralba, J. M. - Hot workability of nanocrystalline AZ91 magnesium alloy. journal of alloys and compounds 595, 1-7, 2014. DOI: 10.1016/j.jallcom.2014.01.091
  • Bernardo, Elena; de Oro, Raquel; Campos, Monica; Manuel Torralba, Jose - Design of Low-Melting Point Compositions Suitable for Transient Liquid Phase Sintering of PM Steels Based on a Thermodynamic and Kinetic Study. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 1748-1760, 2014. DOI: 10.1007/s11661-013-2137-5
  • Cao, Jun; Hu, Jijiang; Fan, Hong; Wan, Jintao; Li, Bogeng - Novel silicone-phenyl contained amine curing agent for epoxy resin: 1. Non-isothermal cure and thermal decomposition. thermochimica acta 593, 30-36, 2014. DOI: 10.1016/j.tca.2014.06.014
  • Jubera, R.; Ridruejo, A.; Gonzalez, C.; LLorca, J. - Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate. mechanics of materials 74, 14-25, 2014. DOI: 10.1016/j.mechmat.2014.03.007
  • Hidago-Manrique, P.; Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Ruano, O. A.; Carreno, F. - Evolution of the microstructure, texture and creep properties of the 7075 aluminium alloy during hot accumulative roll bonding. materials science and engineering a-structural materials properties microstructure and processing 606, 434-442, 2014. DOI: 10.1016/j.msea.2014.03.105
  • Munoz-Moreno, R.; Ruiz-Navas, E. M.; Srinivasarao, B.; Torralba, J. M. - Microstructural Development and Mechanical Properties of PM Ti-45Al-2Nb-2Mn-0.8 vol.% TiB2 Processed by Field Assisted Hot Pressing. journal of materials science & technology 30, 1145-1154, 2014. DOI: 10.1016/j.jmst.2014.08.008
  • Salazar, A.; Rico, A.; Rodriguez, J.; Segurado Escudero, J.; Seltzer, R.; de la Escalera Cutillas, F. Martin - Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature. composites part b-engineering 59, 285-292, 2014. DOI: 10.1016/j.compositesb.2013.12.017
  • Terrones, Jeronimo; Elliott, James A.; Vilatela, Juan J.; Windle, Alan H. - Electric Field-Modulated Non-ohmic Behavior of Carbon Nanotube Fibers in Polar Liquids. acs nano 8, 8497-8504, 2014. DOI: 10.1021/nn5030835
  • Salazar, A.; Rico, A.; Rodriguez, J.; Segurado Escudero, J.; Seltzer, R.; Martin de la Escalera Cutillas, F. - Monotonic loading and fatigue response of a bio-based polyamide PA11 and a petrol-based polyamide PA12 manufactured by selective laser sintering. european polymer journal 59, 36-45, 2014. DOI: 10.1016/j.eurpolymj.2014.07.016
  • Agoras, M.; Castaneda, P. Ponte - Anisotropic finite-strain models for porous viscoplastic materials with microstructure evolution. international journal of solids and structures 51, 981-1002, 2014. DOI: 10.1016/j.ijsolstr.2013.11.025
  • Chen, Yi; Li, Jinshan; Tang, Bin; Kou, Hongchao; Segurado, J.; Cui, Yuwen - Computational study of atomic mobility for bcc phase in Ti-Al-Fe system. calphad-computer coupling of phase diagrams and thermochemistry 46, 205-212, 2014. DOI: 10.1016/j.calphad.2014.05.004
  • Munoz, R.; Martinez, V.; Sket, F.; Gonzalez, C.; LLorca, J. - Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension. composites part a-applied science and manufacturing 59, 93-104, 2014. DOI: 10.1016/j.compositesa.2014.01.003
  • Lotfian, S.; Mayer, C.; Chawla, N.; Llorca, J.; Misra, A.; Baldwin, J. K.; Molina-Aldareguia, J. M. - Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates. thin solid films 571, 260-267, 2014. DOI: 10.1016/j.tsf.2014.06.022
  • Cruzado, A.; Urchegui, M. A.; Gomez, X. - Finite element modeling of fretting wear scars in the thin steel wires: Application in crossed cylinder arrangements. wear 318, 98-105, 2014. DOI: 10.1016/j.wear.2014.06.019
  • Kou, Hongchao; Chen, Yi; Tang, Bin; Cui, Yuwen; Sun, Feng; Li, Jinshan; Xue, Xiangyi - An experimental study on the mechanism of texture evolution during hot-rolling process in a beta titanium alloy. journal of alloys and compounds 603, 23-27, 2014. DOI: 10.1016/j.jallcom.2014.03.070
  • Yue, H. -B.; Fernandez-Blazquez, J. P.; Beneito, D. F.; Vilatela, J. J. - Real time monitoring of click chemistry self-healing in polymer composites. journal of materials chemistry a 2, 3881-3887, 2014. DOI: 10.1039/c3ta14961g
  • Soler, Rafael; Wheeler, Jeffrey M.; Chang, Hyung-Jun; Segurado, Javier; Michler, Johann; Llorca, Javier; Molina-Aldareguia, Jon M. - Understanding size effects on the strength of single crystals through high-temperature micropillar compression. acta materialia 81, 50-57, 2014. DOI: 10.1016/j.actamat.2014.08.007
  • Monclus, M. A.; Karlik, M.; Callisti, M.; Frutos, E.; LLorca, J.; Polcar, T.; Molina-Aldareguia, J. M. - Microstructure and mechanical properties of physical vapor deposited Cu/W nanoscale multilayers: Influence of layer thickness and temperature. thin solid films 571, 275-282, 2014. DOI: 10.1016/j.tsf.2014.05.044
  • Shabanian, Meisam; Kang, Nianjun; Liu, Jianwen; Wagenknecht, Udo; Heinrich, Gert; Wang, De-Yi - Bio-based semi-aromatic polyamide/functional clay nanocomposites: preparation and properties. rsc advances 4, 23420-23427, 2014. DOI: 10.1039/c4ra02949f
  • Munoz, Raul; Delgado, Sofia; Gonzalez, Carlos; Lopez-Romano, Bernardo; Wang, De-Yi; LLorca, Javier - Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials. applied composite materials 21, 149-164, 2014. DOI: 10.1007/s10443-013-9377-9
  • Jerusalem, Antoine; Garcia-Grajales, Julian A.; Merchan-Perez, Angel; Pena, Jose M. - A computational model coupling mechanics and electrophysiology in spinal cord injury. biomechanics and modeling in mechanobiology 13, 883-896, 2014. DOI: 10.1007/s10237-013-0543-7
  • Chen, Yi; Tang, Bin; Xu, Guanglong; Wang, Chuanyun; Kou, Hongchao; Li, Jinshan; Cui, Yuwen - Diffusion Research in BCC Ti-Al-Mo Ternary Alloys. metallurgical and materials transactions a-physical metallurgy and materials science 45A, 1647-1652, 2014. DOI: 10.1007/s11661-014-2245-x
  • Jabbari Taleghani, M. A.; Ruiz Navas, E. M.; Torralba, J. M. - Microstructural and mechanical characterisation of 7075 aluminium alloy consolidated from a premixed powder by cold compaction and hot extrusion. materials & design 55, 674-682, 2014. DOI: 10.1016/j.matdes.2013.10.028
  • Vajari, Danial Ashouri; Gonzalez, Carlos; Llorca, Javier; Legarth, Brian Nyvang - A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. composites science and technology 97, 46-54, 2014. DOI: 10.1016/j.compscitech.2014.04.004
  • Wang, Xin; Pan, Ye-Tang; Wan, Jin-Tao; Wang, De-Yi - An eco-friendly way to fire retardant flexible polyurethane foam: layer-by-layer assembly of fully bio-based substances. rsc advances 4, 46164-46169, 2014. DOI: 10.1039/c4ra07972h
  • Falco, O.; Mayugo, J. A.; Lopes, C. S.; Gascons, N.; Turon, A.; Costa, J. - Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior. composites part b-engineering 56, 660-669, 2014. DOI: 10.1016/j.compositesb.2013.09.003
  • Li, Cheng; Kang, Nian-Jun; Delgado Labrandero, Sofia; Wan, Jintao; Gonzalez, Carlos; Wane, De-Yi - Synergistic Effect of Carbon Nanotube and Polyethersulfone on Flame Retardancy of Carbon Fiber Reinforced Epoxy Composites. industrial & engineering chemistry research 53, 1040-1047, 2014. DOI: 10.1021/ie403378w
  • Herrera-Solaz, V.; Hidalgo-Manrique, R.; Perez-Prado, M. T.; Letzig, D.; Llorca, J.; Segurado, J. - Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys. materials letters 128, 199-203, 2014. DOI: 10.1016/j.matlet.2014.04.144
  • Mesa, M. C.; Oliete, P. B.; Pastor, J. Y.; Martin, A.; LLorca, J. - Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method. journal of the european ceramic society 34, 2081-2087, 2014. DOI: 10.1016/j.jeurceramsoc.2013.11.013
  • de Diego-Calderon, I.; Santofimia, M. J.; Molina-Aldareguia, J. M.; Monclus, M. A.; Sabirov, I. - Deformation behavior of a high strength multiphase steel at macro- and micro-scales. materials science and engineering a-structural materials properties microstructure and processing 611, 201-211, 2014. DOI: 10.1016/j.msea.2014.05.068
  • Sket, F.; Enfedaque, A.; Alton, C.; Gonzalez, C.; Molina-Aldareguia, J. M.; Llorca, J. - Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates. composites science and technology 90, 129-138, 2014. DOI: 10.1016/j.compscitech.2013.10.022
  • Inuwa, I. M.; Hassan, Azman; Wang, De-Yi; Samsudin, S. A.; Haafiz, M. K. Mohamad; Wong, S. L.; Jawaid, M. - Influence of exfoliated graphite nanoplatelets on the flammability and thermal properties of polyethylene terephthalate/polypropylene nanocomposites. polymer degradation and stability 110, 137-148, 2014. DOI: 10.1016/j.polymdegradstab.2014.08.025
  • Herrera-Solaz, V.; LLorca, J.; Dogan, E.; Karaman, I.; Segurado, J. - An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy. international journal of plasticity 57, 1-15, 2014. DOI: 10.1016/j.ijplas.2014.02.001
  • Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Bohlen, J.; Gutierrez-Urrutia, I.; Llorca, J.; Molina-Aldareguia, J. M. - Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation. acta materialia 71, 283-292, 2014. DOI: 10.1016/j.actamat.2014.03.014
  • Reguero, Victor; Aleman, Belen; Mas, Bartolome; Jose Vilatela, Juan - Controlling Carbon Nanotube Type in Macroscopic Fibers Synthesized by the Direct Spinning Process. chemistry of materials 26, 3550-3557, 2014. DOI: 10.1021/cm501187x
  • Mishnaevsky, Leon, Jr.; Levashov, Evgeny; Valiev, Ruslan Z.; Segurado, Javier; Sabirov, Ilchat; Enikeev, Nariman; Prokoshkin, Sergey; Solov'yov, Andrey V.; Korotitskiy, Andrey; Gutmanas, Elazar; Gotman, Irene; Rabkin, Eugen; Psakh'e, Sergey; Dluhos, Ludek; Seefeldt, Marc; Smolin, Alexey - Nanostructured titanium-based materials for medical implants: Modeling and development. materials science & engineering r-reports 81, 1-19, 2014. DOI: 10.1016/j.mser.2014.04.002
  • Valiev, R. Z.; Murashkin, M. Yu; Sabirov, I. - A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity. scripta materialia 76, 13-16, 2014. DOI: 10.1016/j.scriptamat.2013.12.002

    • 2013

  • Milenkovic, Srdjan; Caram, Rubens - Oxidation behavior and thermal stability of a NiAlV eutectic alloy. physica status solidi a-applications and materials science 210, 1019-1024, 2013. DOI: 10.1002/pssa.201200836
  • Navarro, G.; Jabbari Taleghani, M. A.; Torralba, J. M. - Pressed and sintered AISI 4140 PM low alloy steel from gas atomised powders. powder metallurgy 56, 11-13, 2013. DOI: 10.1179/0032589912Z.00000000087
  • Boehlert, Carl; Chen, Zhe; Gutierrez-Urrutia, Ivan; Llorca, Javier; Perez-Prado, Maria Teresa - On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31. superplasticity in advanced materials 735, 22-26, 2013. DOI: 10.4028/www.scientific.net/MSF.735.22
  • Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Mayugo, J. A.; Costa, J. - Two-pheromone Ant Colony Optimization to design dispersed laminates for aeronautical structural applications. advances in engineering software 66, 10-18, 2013. DOI: 10.1016/j.advengsoft.2013.02.002
  • Garcia, P.; Campos, M.; Torralba, J. M. - Dimensional consistency achieved in high-performance synchronizing hubs. revista de metalurgia 49, 55-64, 2013. DOI: 10.3989/revmetalm.1218
  • Murashkin, M. Yu.; Enikeev, N. A.; Kazykhanov, V. U.; Sabirov, I.; Valiev, R. Z. - PHYSICAL SIMULATION OF COLD ROLLING OF ULTRA-FINE GRAINED AL 5083 ALLOY TO STUDY MICROSTRUCTURE EVOLUTION. reviews on advanced materials science 35, 75-85, 2013. DOI:
  • Xu, Guanglong; Cui, Yuwen; Zeng, Lijun; Tao, Xiaoma; Liu, Libin; Jin, Zhanpeng - Experimental Investigation and Thermodynamic Modeling for the Mg-Nd-Sr System. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 5634-5641, 2013. DOI: 10.1007/s11661-013-2038-7
  • Wang, Yinghao; Tang, Bin; Cui, Y-W.; Kou, Hongchao; Li, Jinshan - Effect of strain rate on impact response and omega transformation of quenched Zr-Nb alloys. materials characterization 84, 10-15, 2013. DOI: 10.1016/j.matchar.2013.07.002
  • Sklenard, Benoit; Batude, Perrine; Rafhay, Quentin; Martin-Bragado, Ignacio; Xu, Cuiqin; Previtali, Bernard; Colombeau, Benjamin; Khaja, Fareen-Adeni; Cristoloveanu, Sorin; Rivallin, Pierrette; Tavernier, Clement; Poiroux, Thierry - Influence of device architecture on junction leakage in low-temperature process FDSOI MOSFETs. solid-state electronics 88, 9-14, 2013. DOI: 10.1016/j.sse.2013.04.018
  • Sabirov, I.; Yang, C.; Mullins, J.; Hodgson, P. D. - A theoretical study of the structure-property relations in ultra-fine metallic materials with fractal microstructures. materials science and engineering a-structural materials properties microstructure and processing 559, 543-548, 2013. DOI: 10.1016/j.msea.2012.08.139
  • Fei, Hou-jun; Xu, Guang-long; Liu, Li-bin; Bo, Hong; Zeng, Li-jun; Chen, Cui-ping - Phase equilibria in Mg-rich corner of Mg-Ca-RE (RE=Gd, Nd) systems at 400 degrees C. transactions of nonferrous metals society of china 23, 881-888, 2013. DOI: 10.1016/S1003-6326(13)62543-1
  • Huespe, A. E.; Oliver, J.; Mora, D. F. - Computational modeling of high performance steel fiber reinforced concrete using a micromorphic approach. computational mechanics 52, 1243-1264, 2013. DOI: 10.1007/s00466-013-0873-4
  • de Antonio Gomez, Santiago; Pina, Carlos M.; Martin-Bragado, Ignacio - Lattice Kinetic Modeling of the Anisotropic Growth of Two-Dimensional Islands on Barite (001) Surface. crystal growth & design 13, 2840-2845, 2013. DOI: 10.1021/cg4002237
  • Srinivasarao, B.; Zhilyaev, A. P.; Munoz-Moreno, R.; Perez-Prado, M. T. - Effect of high pressure torsion on the microstructure evolution of a gamma Ti-45Al-2Nb-2Mn-0.8 vol% TiB2 alloy. journal of materials science 48, 4599-4605, 2013. DOI: 10.1007/s10853-013-7201-4
  • Martin-Bragado, Ignacio - Comprehensive modeling of solid phase epitaxial growth using Lattice Kinetic Monte Carlo. nuclear instruments & methods in physics research section b-beam interactions with materials and atoms 303, 184-187, 2013. DOI: 10.1016/j.nimb.2012.10.026
  • Straffelini, G.; Da Costa, L. Dione; Menapace, C.; Zanella, C.; Torralba, J. M. - Properties of AZ91 alloy produced by spark plasma sintering and extrusion. powder metallurgy 56, 405-410, 2013. DOI: 10.1179/1743290113Y.0000000060
  • Rivera, A.; Valles, G.; Caturla, M. J.; Martin-Bragado, I. - Effect of ion flux on helium retention in helium-irradiated tungsten. nuclear instruments & methods in physics research section b-beam interactions with materials and atoms 303, 81-83, 2013. DOI: 10.1016/j.nimb.2012.10.038
  • Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J. - Damage resistance and damage tolerance of dispersed CFRP laminates: The bending stiffness effect. composite structures 106, 30-32, 2013. DOI: 10.1016/j.compstruct.2013.05.046
  • Sabirov, I.; Valiev, R. Z.; Pippan, R. - About application of three dimensional analyses of fracture surfaces in fracture study on nanostructured titanium. computational materials science 76, 72-79, 2013. DOI: 10.1016/j.commatsci.2012.12.027

Follow Us

Linkedin-in Icon-twitter-x Youtube Instagram Facebook-f Flickr Spotify

Contact us

Phone: (+34) 91 549 34 22
Email: contact.materials@imdea.org

Location

C/ Eric Kandel, 2
Tecnogetafe
28906, Getafe, Madrid (Spain)

HOW TO ARRIVE

© All rights reserved

Privacy policy | Accesibility | Disclaimer | Ethics Channel

© Fractales