Herraez, M.; Gonzalez, C.; Lopes, C. S.
Spherical cobalt/cobalt oxide – Carbon composite anodes for enhanced lithium-ion storage
Patrinoiu, Greta; Etacheri, Vinodkumar; Somacescu, Simona; Teodorescu, Valentin S.; Birjega, Ruxandra; Culita, Dana C.; Hong, Chulgi Nathan; Calderon-Moreno, Jose Maria; Pol, Vilas G.; Carp, Oana
Effect of stereocomplex crystal and flexible segments on the crystallization and tensile behavior of poly(L-lactide)
Li, Xiaolu; Zhang, Xiuqin; Liu, Guoming; Yang, Zhongkai; Yang, Bo; Qi, Yue; Wang, Rui; Wang, De-Yi
Maximizing Volumetric Removal Capacity in Capacitive Deionization by Adjusting Electrode Thickness and Charging Mode
Santos, Cleis; Lado, Julio J.; Garcia-Quismondo, Enrique; Soria, Jorge; Palma, Jesus; Anderson, Marc A.
Processing of a new high entropy alloy: AlCrFeMoNiTi
Prieto, Estela; Calderon, Raquel De Oro; Konegger, Thomas; Gordo, Elena; Gierl-Mayer, Christian; Sheikh, Saad; Guo, Sheng; Danninger, Herbert; Milenkovic, Srdjan; Alvaredo, Paula
The effect of nylon nanofibers on the dynamic behaviour and the delamination resistance of GFRP composites
Garcia, Cristobal; Trendafilova, Irina; Zucchelli, Andrea; Contreras, Justin
In Silico Design of 2D and 3D Covalent Organic Frameworks for Methane Storage Applications
Mercado, Rocio; Fu, Rueih-Sheng; Yakutovich, Aliaksandr V.; Talirz, Leopold; Haranczyk, Maciej; Smit, Berend
Novel Dihydroxy-Containing Ammonium Phosphate Based Poly(Lactic Acid): Synthesis, Characterization and Flame Retardancy
Jian, Rong-Kun; Xia, Long; Ai, Yuan-Fang; Wang, De-Yi
Revealing the Effect of Local Connectivity of Rigid Phases during Deformation at High Temperature of Cast AlSi12Cu4Ni(2,3)Mg Alloys
Bugelnig, Katrin; Germann, Holger; Steffens, Thomas; Sket, Federico; Adrien, Jerome; Maire, Eric; Boller, Elodie; Requena, Guillermo
Crack propagation in TRIP assisted steels modeled by crystal plasticity and cohesive zone method
Dakshinamurthy, Manjunath; Ma, Anxin
Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
Cruzado, A.; Lucarini, S.; LLorca, J.; Segurado, J.
Self-powered pressure sensor based on the triboelectric effect and its analysis using dynamic mechanical analysis
Garcia, Cristobal; Trendafilova, Irina; Guzman de Villoria, Roberto; Sanchez del Rio, Jose
Enhanced microwave-absorbing property of precursor infiltration and pyrolysis derived SiCf/SiC composites at X band: Role of carbon-rich interphase
Yang, Lingwei; Liu, Haitao; Zu, Mei
Interfacial growth of MOF-derived layered double hydroxide nanosheets on graphene slab towards fabrication of multifunctional epoxy nanocomposites (vol 330, pg 1222, 2017)
Pan, Ye-Tang; Wan, Jintao; Zhao, Xuanliang; Li, Cheng; Wang, De-Yi
Hierarchical nanoporous silica doped with tin as novel multifunctional hybrid material to flexible poly (vinyl chloride) with greatly improved flame retardancy and mechanical properties (vol 295, pg 451, 2016)
Pan, Ye-Tang; Trempont, Cedric; Wang, De-Yi
White perovskite based lighting devices
Bidikoudi, M.; Fresta, E.; Costa, R. D.
Fitting electron density as a physically sound basis for the development of interatomic potentials of complex alloys
Ortiz-Roldan, Jose M.; Esteban-Manzanares, Gustavo; Lucarini, Sergio; Calero, Sofia; Segurado, Javier; Montero-Chacon, Francisco; Rabdel Ruiz-Salvador, A.; Hamad, Said
Research Progress on Micro-mechanical Property of Continuous Fiber-reinforced Ceramic Matrix Composites
Liu Hai-Tao; Yang Ling-Wei; Han Shuang
When Fluorescent Proteins Meet White Light-Emitting Diodes
Fernandez-Luna, Veronica; Coto, Pedro B.; Costa, Ruben D.
Composites of Proteins and 2D Nanomaterials
Demirel, Melik C.; Vural, Mert; Terrones, Mauricio
Biobased Epoxy Resin with Low Electrical Permissivity and Flame Retardancy: From Environmental Friendly High-Throughput Synthesis to Properties
Li, Cheng; Fan, Hong; Aziz, Tariq; Bittencourt, Carla; Wu, Linbo; Wang, De-Yi; Dubois, Philippe
Impact response of basalt textile reinforced concrete subjected to different velocities and temperatures
Liu, Sai; Zhu, Deju; Ou, Yunfu; Yao, Yiming; Shi, Caijun
Coupling nonlinear beams and continua: Variational principles and finite element approximations
Romero, Ignacio
Bio-Materials for Light Management
Costa, Ruben D.
Synergistic Effect of Graphene Oxide and Mesoporous Structure on Flame Retardancy of Nature Rubber/IFR Composites
Wang, Na; Zhang, Miao; Kang, Ping; Zhang, Jing; Fang, Qinghong; Li, Wenda
Experimental and computational study of diffusion mobilities for the bcc phase in the Fe-Al-(Si, Mn) systems
Zheng, Weisen; Wang, Jingya; He, Yanlin; Lu, Xiao-Gang; Li, Lin
Thermodynamic Evaluation of the Co-Al-C System by Coupling Ab Initio Calculations and CALPHAD Approach
Zheng, Weisen; He, Shuang; Wang, Jingya; Mao, Huahai
Experimental Diffusion Research on BCC Ti-Al-Sn Ternary Alloys
Wu, Qiaojun; Wang, Jingya; Gu, Yuanyu; Guo, Yanhua; Xu, Guanglong; Cui, Yuwen
Structure mediation and ductility enhancement of poly(L-lactide) by random copolymer poly(D-lactide-co-epsilon-caprolactone)
Zhang, Xiuqin; Yin, Yongai; Song, Yan; Li, Xiaolu; Dong, Zhenfeng; Wang, Rui; Wang, De-Yi
Influence of phenylphosphonic amide on rheological, mechanical and flammable properties of carbon fiber/RTM6 composites
Zhao, Xiaomin; Zhang, Lu; Picon Alonso, Juan; Delgado, Sofia; Martinez-Miranda, M. R.; Wang, De-Yi
Adhesion enhancement of DLC hard coatings by HiPIMS metal ion etching pretreatment
Santiago, J. A.; Fernandez-Martinez, I.; Wennberg, A.; Molina-Aldareguia, J. M.; Castillo-Rodriguez, M.; Rojas, T. C.; Sanchez-Lopez, J. C.; Gonzalez, M. U.; Garcia-Martin, J. M.; Li, H.; Bellido-Gonzalez, V.; Monclus, M. A.; Gonzalez-Arrabal, R.
Microstructure and compression strength of Co-based superalloys hardened by gamma ‘ and carbide precipitation
Carton-Cordero, Marta; Campos, Monica; Freund, Lisa P.; Kolb, Markus; Neumeier, Steffen; Goeken, Mathias; Torralba, Jose M.
A carbon nanotube integrated microfluidic device for blood plasma extraction
Yeh, Yin-Ting; Lin, Zhong; Zheng, Si-Yang; Terrones, Mauricio
Core-shell flame retardant/graphene oxide hybrid : a self-assembly strategy towards reducing fire hazard and improving toughness of polylactic acid
Jing, Jian; Zhang, Yan; Fang, Zheng-Ping; Wang, De-Yi
Locally Induced Spin States on Graphene by Chemical Attachment of Boron Atoms
Li, Qing; Lin, Haiping; Lv, Ruitao; Terrones, Mauricio; Chi, Lifeng; Hofer, Werner A.; Pan, Minghu
Assessment of atomic mobility for BCC Ti-Mn and Ti-Al-Mn alloys
Dong, Hao; Wang, Jingya; Xu, Guanglong; Zhou, Lian; Cui, Yuwen
Integrated Computational Materials Engineering in Solar Plants: The Virtual Materials Design Project
Montero-Chacon, Francisco; Chiumenti, Michele; Segurado, Javier; Doblare, Manuel
Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu
Yang, L. W.; Wang, C. Y.; Monclus, M. A.; Lu, L.; Molina-Aldareguia, J. M.; Llorca, J.
Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design (vol 91, pg 484, 2016)
Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J.
Discrete dislocation dynamics simulations of dislocation-theta ‘ precipitate interaction in Al-Cu alloys
Santos-Guemes, R.; Esteban-Manzanares, G.; Papadimitriou, I.; Segurado, J.; Capolungo, L.; LLorca, J.
Effect of anisotropy on the mechanical properties of polyurethane foams: An experimental and numerical study
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
Light-emitting electrochemical cells based on inorganic metal halide perovskite nanocrystals
Aygueler, Meltem F.; Puscher, Bianka M. D.; Tong, Yu; Bein, Thomas; Urban, Alexander S.; Costa, Ruben D.; Docampo, Pablo
Novel Ligand and Device Designs for Stable Light-Emitting Electrochemical Cells Based on Heteroleptic Copper(I) Complexes
Fresta, Elisa; Volpi, Giorgio; Milanesio, Marco; Garino, Claudio; Barolo, Claudia; Costa, Ruben D.
Hybrid titania-based multilayered photoelectrode for superior low temperature dye-sensitized solar cells
Serrano, Elena; Sepulveda, Angel; Lalinde, Elena; Berenguer, Jesus; Costa, Ruben; Garcia Martinez, Javier
Growth competition between columnar dendritic grains – Cellular automaton versus phase field modeling
Pineau, A.; Guillemot, G.; Tourret, D.; Karma, A.; Gandin, Ch. -A.
A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy
Rodriguez-Veiga, A.; Bellon, B.; Papadimitriou, I.; Esteban-Manzanares, G.; Sabirov, I.; LLorca, J.
Lattice kinetic Monte Carlo modeling of germanium solid phase epitaxial growth
Gomez-Selles, J. L.; Darby, B. L.; Jones, K. S.; Martin-Bragado, I.
Two-pheromone Ant Colony Optimization to design dispersed laminates for aeronautical structural applications
Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Mayugo, J. A.; Costa, J.
Dimensional consistency achieved in high-performance synchronizing hubs
Garcia, P.; Campos, M.; Torralba, J. M.
Dynamic deformation of high pressure die-cast magnesium alloys
Dudamell, N. V.; Galvez, F.; Perez-Prado, M. T.
Modeling of Incommensurate omega Structure in the Zr-Nb Alloys
Tang, Bin; Cui, Y. -W.; Chang, Hui; Kou, Hongchao; Li, Jinshan; Zhou, Lian
Influence of hygrothermal aging on the mechanical properties of Nylon 12 composites processed by selective laser sintering
Seltzer, R.; Segurado Escudero, J.; de la Escalera Cutillas, F. Martin
Quantification of hardening in Fe-Mn master alloys prepared by a mechanical alloying process via nanoindentation experiments
Sicre-Artalejo, Jose; Campos, Monica; Molina-Aldareguia, Jon M.; Torralba, Jose M.
Tearing and Delaminating of a Polymer Laminate
Kao-Walter, S.; Walter, M.; Dasari, A.; Leon, A.
VIRTUAL MECHANICAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
LLorca, Javier; Gonzalez, Carlos
Continuum modeling of {10(1)over-bar2} twinning in a Mg-3%Al-1%Zn rolled sheet
Jerusalem, A.; Fernandez, A.; Perez-Prado, M. T.
Virtual fracture testing of composite materials and structures
LLorca, Javier; Cox, Brian N.
Mechanical behavior and microstructure evolution of a quenched and partitioned steel during drop weight impact and punch testing
Xia, Peikang; Sabirov, Ilchat; Molina-Aldareguia, Jon; Verleysen, Patricia; Petrov, Roumen
Interfacial engineering of layered double hydroxide toward epoxy resin with improved fire safety and mechanical property
Li, Zhi; Liu, Zhiqi; Dufosse, Francois; Yan, Luke; Wang, De-Yi
H2O2/UV layer-by-layer oxidation of multiwall carbon nanotubes: The onion effect and the control of the degree of surface crystallinity and diameter
Gonzalez, Viviana Jehova; Vega-Diaz, Sofia Magdalena; Morelos-Gomez, Aaron; Fujisawa, Kazunori; Endo, Morinobu; Cadiz, Olga Martin; Llido, Juan Baselga; Terrones, Mauricio
Transferrable polymeric carbon nitride/nitrogen-doped graphene films for solid state optoelectronics
Gan, Xin; Lv, Ruitao; Zhang, Tianyi; Zhang, Fu; Terrones, Mauricio; Kang, Feiyu
The effect of manganese additions on the high temperature oxidation behaviour of the high-vanadium cast iron
Chen, Pinghu; Liu, Zhilin; Li, Ruiqing; Li, Xiaoqian
Origin of Degradation in Si-Based All-Solid-State Li-Ion Microbatteries
Chen, Chunguang; Oudenhoven, Jos F. M.; Danilov, Dmitri L.; Vezhlev, Egor; Gao, Lu; Li, Na; Mulder, Fokko M.; Eichel, Ruediger-A.; Notten, Peter H. L.
Emerging Materials in Heterogeneous Electrocatalysis Involving Oxygen for Energy Harvesting
Rana, Moumita; Mondal, Sanjit; Sahoo, Lipipuspa; Chatterjee, Kaustav; Karthik, Pitchiah E.; Gautam, Ujjal K.
Surface Chemistry Analysis of Carbon Nanotube Fibers by X-Ray Photoelectron Spectroscopy
Aleman, Belen; Vila, Maria; Vilatela, Juan J.
A novel oligomer containing DOPO and ferrocene groups: Synthesis, characterization, and its application in fire retardant epoxy resin
Wen, Yi; Cheng, Zhou; Li, Wenxiong; Li, Zhi; Liao, Duijun; Hu, Xiaoping; Pan, Ning; Wang, Deyi; Hull, T. Richard
Numerical simulation of the ballistic response of needle-punched nonwoven fabrics
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; Llorca, J.
The Effect of a Semi-Industrial Masterbatch Process on the Carbon Nanotube Agglomerates and Its Influence in the Properties of Thermoplastic Carbon Nanotube Composites
Herrera-Ramirez, Luis C.; Castell, Pere; Castillo-Rodriguez, Miguel; Fernandez, Angel; Guzman de Villoria, Roberto
Controlling the high temperature mechanical behavior of Al alloys by precipitation and severe straining
Cepeda-Jimenez, C. M.; Castillo-Rodriguez, M.; Molina-Aldareguia, J. M.; Huang, Y.; Langdon, T. G.; Perez-Prado, M. T.
Bio-based carbonaceous composite materials from epoxidised linseed oil, bio-derived curing agent and starch with controllable functionality
Supanchaiyamat, N.; Shuttleworth, P. S.; Sikhom, C.; Chaengkham, S.; Yue, H-B.; Fernandez-Blazquez, J. P.; Budarin, V. L.; Hunt, A. J.
Response to Comment on ‘Thickness and temperature depending intermixing of SiOx/SiO2 and SiOxNy/SiO2 superlattices: Experimental observation and thermodynamic modeling’ [Appl. Phys. Lett. 109, 166101 (2016)]
Zhigunov, D. M.; Sarikov, A.; Chesnokov, Yu. M.; Vasiliev, A. L.; Zakharov, N.; Kashkarov, P. K.
Hydrogen behavior in Al-Cr alloys: Synchrotron-based photoelectron microscopy of the rapidly solidified structure
Tashlykova-Bushkevich, Iya I.; Amati, Matteo; Aleman, Belen; Sezen, Hikmet; Gregoratti, Luca; Kiskinova, Maya
Time dependent modeling of single particle displacement damage in silicon devices
Tang, Du; Martin-Bragado, Ignacio; He, Chaohui; Zang, Hang; Xiong, Cen; Li, Yonghong; Guo, Daxi; Zhang, Peng; Zhang, Jinxin
Exploring phase stability, electronic and mechanical properties of Ce-Pb intermetallic compounds using first-principles calculations
Tao, Xiaoma; Wang, Ziru; Lan, Chunxiang; Xu, Guanglong; Ouyang, Yifang; Du, Yong
A 3D dislocation dynamics analysis of the size effect on the strength of [111] LiF micropillars at 300K and 600K
Chang, Hyung-Jun; Segurado, Javier; Molina-Aldareguia, Jon M.; Soler, Rafael; LLorca, Javier
Damage accumulation during cryogenic and room temperature implantations in strained SiGe alloys
Payet, Anthony; Luce, Flavia Piegas; Curfs, Caroline; Mathieu, Benoit; Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Joblot, Sylvain; Tavernier, Clement; Colombeau, Benjamin; Guissi, Sofiene; Martin-Bragado, Ignacio; Gergaud, Patrice
Microstructure Evolution in Fe and Fe-Cr Alloys with OKMC Methods
Caturla, Maria J.; Aliaga, Maria J.; Martin-Bragado, Ignacio; Dopico, Ignacio; Malerba, Lorenzo; Hernandez-Mayoral, Mercedes
High-Temperature Micropillar Compression Creep Testing of Constituent Phases in Lead-Free Solder
Mayer, Carl R.; Lotfian, Saeid; Molina-Aldareguia, Jon; Chawla, Nikhilesh
Crystal Plasticity Finite Element Simulations for Single Phase Titanium Alloys: Effect of Polycrystalline Aggregate Features on the Mechanical Response
Tang Bin; Xie Shao; Liu Yi; Han Fengbo; Kou Hongchao; Li Jinshan
Enhanced Impact Energy Absorption Characteristics of Sandwich Composites through Tufting
Henao, Anamaria; Guzman de Villoria, Roberto; Cuartero, Jesus; Carrera, Marco; Picon, Juan; Miravete, Antonio
Effect of Q&P parameters on microstructure development and mechanical behaviour of Q&P steels
De Diego-Calderon, Irene; De Knijf, Dorien; Molina-Aldareguia, Jon M.; Sabirov, Ilchat; Fojer, Cecilia; Petrov, Roumen
Study of the Synergistic Effect of Nanoporous Nickel Phosphates on Novel Intumescent Flame Retardant Polypropylene Composites
Nie, Shibin; Zhang, Chi; Peng, Chao; Wang, De-yi; Ding, Daowei; He, Qingliang
Mechanical alloying and field assisted hot pressing of nanocrystalline B2-NiAl intermetallic compound
Varona-Caballero, A.; Milenkovic, S.; Jabbari-Taleghani, M. A.; Monge, M. A.
Mechanical and functional properties of Invar alloy for mu-MIM
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
A physical simulation study of the effect of thermal variations on the secondary dendrite arm spacing in a Ni-based superalloy
Rahimian, Mehdi; Milenkovic, Srdjan; Sabirov, Ilchat
Deformation behaviour of a commercial pure titanium alloy during hot compression testing
Chao, Qi; Beladi, Hossein; Sabirov, Ilchat; Hodgson, Peter D.
Porphyrins as Multifunctional Interconnects in Networks of ZnO Nanoparticles and their Application in Dye-Sensitized Solar Cells
Duering, Jasmin; Kunzmann, Andreas; Killian, Manuela S.; Costa, Ruben D.; Guldi, Dirk M.; Groehn, Franziska
Effect of phytic acid-modified layered double hydroxide on flammability and mechanical properties of intumescent flame retardant polypropylene system
Kalali, Ehsan Naderi; Montes, Anabel; Wang, Xin; Zhang, Lu; Shabestari, Marjan E.; Li, Zhi; Wang, De-Yi
Cutting Materials in Half: A Graph Theory Approach for Generating Crystal Surfaces and Its Prediction of 2D Zeolites
Witman, Matthew; Ling, Sanliang; Boyd, Peter; Barthel, Senja; Haranczyk, Maciej; Slater, Ben; Smit, Berend
Enhanced Electro-Fenton Mineralization of Acid Orange 7 Using a Carbon Nanotube Fiber-Based Cathode
Thi Xuan Huong Le; Aieman, Beien; Vilatela, Juan J.; Bechelany, Mikhael; Cretin, Marc
Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves
Senokos, Evgeny; Ou, Yunfu; Jose Torres, Juan; Sket, Federico; Gonzalez, Carlos; Marcilla, Rebeca; Vilatela, Juan J.
Understanding the high temperature reversed yield asymmetry in a Mg-rare earth alloy by slip trace analysis
Cepeda-Jimenez, C. M.; Prado-Martinez, C.; Perez-Prado, M. T.
Cobalt Nanoparticles Chemically Bonded to Porous Carbon Nanosheets: A Stable High-Capacity Anode for Fast-Charging Lithium-Ion Batteries
Etacheri, Vinodkumar; Hong, Chulgi Nathan; Tang, Jialiang; Pol, Vilas G.
Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach
Garcia-Carpintero, A.; van den Beuken, B. N. G.; Haldar, S.; Herraez, M.; Gonzalez, C.; Lopes, C. S.
Triboelectric nanogenerator as self-powered impact sensor
Garcia, Cristobal; Trendafilova, Irina; Guzman de Villoria, Roberto; Sanchez del Rio, Jose
Development of Duplex Stainless Steels by Field-Assisted Hot Pressing: Influence of the Particle Size and Morphology of the Powders on the Final Mechanical Properties
Garcia-Junceda, A.; Rinon, M.; Torralba, J. M.
Energy-entropy-momentum integration schemes for general discrete non-smooth dissipative problems in thermomechanics
Portillo, D.; Garcia Orden, J. C.; Romero, I.
Iodine-Pseudohalogen Ionic Liquid-Based Electrolytes for Quasi-Solid-State Dye-Sensitized Solar Cells
Lennert, Annkatrin; Sternberg, Michelle; Meyer, Karsten; Costa, Ruben D.; Guldi, Dirk M.
Review of Grain Refinement of Cast Metals Through Inoculation: Theories and Developments
Liu, Zhilin
A novel high symmetry interlocking micro-architecture design for polymer composites with improved mechanical properties
Haldar, Sandip; Sain, Trisha; Ghosh, Susanta
Mapping of Diffusion and Nanohardness Properties of Fcc Co-Al-V Alloys Using Ternary Diffusion Couples
Wang, Chuanyun; Xu, Guanglong; Cui, Yuwen
The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys
Hu, Libin; Zhan, Lihua; Liu, Zhilin; Shen, Rulin; Yang, Youliang; Ma, Ziyao; Liu, Ming; Liu, Jian; Yang, Yingge; Wang, Xun
The effect of the pre-heating stage on the microstructure and texture of a cold rolled FeCMnAlSi steel under conventional and ultrafast heating
Castro Cerda, F. M.; Goulas, C.; Sabirov, I.; Kestens, L. A. I.; Petrov, R. H.
Effect of SPD processing on mechanical behavior and dynamic strain aging of an Al-Mg alloy in various deformation modes and wide strain rate range
Valdes-Tabernero, M. A.; Sancho-Cadenas, R.; Sabirov, I.; Murashkin, M. Yu; Ovid'ko, I. A.; Galvez, F.
Effect of tea saponin-based intumescent flame retardant on thermal stability, mechanical property and flame retardancy of natural rubber composites
Wang, Na; Hu, Lidong; Babu, Heeralal Vignesh; Zhang, Jing; Fang, Qinghong
Choosing the right nanoparticle size – designing novel ZnO electrode architectures for efficient dye-sensitized solar cells
Pfau, Markus W.; Kunzmann, Andreas; Segets, Doris; Peukert, Wolfgang; Wallace, Gordon G.; Officer, David L.; Clark, Tim; Costa, Ruben D.; Guldi, Dirk M.
High-performance carrageenan film based on carrageenan intercalated layered double hydroxide with enhanced properties: Fire safety, thermal stability and barrier effect
Li, Zhi; Wang, Jiang; Fernandez Exposito, Daniel; Zhang, Jing; Fu, Can; Shi, Dean; Wang, De-Yi
Surrogate models of the influence of the microstructure on the mechanical properties of closed- and open-cell foams
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
Effect of Ultrafast Heating on the Properties of the Microconstituents in a Low-Carbon Steel
Valdes-Tabernero, M. A.; Vercruysse, F.; Sabirov, I.; Petrov, R. H.; Monclus, M. A.; Molina-Aldareguia, J. M.
Enhancements in mechanical and electrical properties of carbon nanotube films by SiC and C matrix bridging
Zhang, Xiaoshan; Yang, Lingwei; Liu, Haitao
Kinetic Diffusion Couple for Mapping Microstructural and Mechanical Data on Ti-Al-Mo Titanium Alloys
Chen, Yi; Kou, Hongchao; Cheng, Liang; Zhang, Yunlong; Yu, Yun; Lu, Yalin
Synthesis and anhydrous proton conductivity of doped azole functional PGMA-hBN nano-flakes
Yusuf, Abdulmalik; Celik, Sevim Unugur; Bozkurt, Ayhan
A multiscale methodology quantifying the sintering temperature-dependent mechanical properties of oxide matrix composites
Jiang, Ru; Yang, Lingwei; Liu, Haitao; Tan, Wei; Sun, Xun; Cheng, Haifeng; Mao, Weiguo
Interconnected metal oxide CNT fibre hybrid networks for current collector-free asymmetric capacitive deionization dagger
Santos, Cleis; Lado, Julio J.; Garcia-Quismondo, Enrique; Rodriguez, Ines, V; Hospital-Benito, Daniel; Palma, Jesus; Anderson, Marc A.; Vilatela, Juan J.
Invited paper: Kinetic diffusion multiple: A high-throughput approach to screening the composition-microstructure-micromechanical properties relationships
Mao, Shu; Wang, Chuanyun; Li, Na; Wang, Jingya; Chen, Yi; Xu, Guanglong; Guo, Yanhua; Cui, Yuwen
Enhanced strain rate sensitivity of Zr-based bulk metallic glasses subjected to high pressure torsion
Boltynjuk, E. V.; Gunderov, D. V.; Ubyivovk, E. V.; Monclus, M. A.; Yang, L. W.; Molina-Aldareguia, J. M.; Tyurin, A. I.; Kilmametov, A. R.; Churakova, A. A.; Churyumov, A. Yu.; Valiev, R. Z.
Improving charge injection and charge transport in CuO-based p-type DSSCs – a quick and simple precipitation method for small CuO nanoparticles
Langmar, Oliver; Ganivet, Carolina R.; Schol, Peter; Scharl, Tobias; de la Torre, Gema; Torres, Tomas; Costa, Ruben D.; Guldi, Dirk M.
Thermal-field effects on interface dynamics and microstructure selection during alloy directional solidification
Song, Y.; Tourret, D.; Mota, F. L.; Pereda, J.; Billia, B.; Bergeon, N.; Trivedi, R.; Karma, A.
Slip transfer across gamma-TiAl lamellae in tension
Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon
Tuning pentacene based dye-sensitized solar cells
Kunzmann, Andreas; Gruber, Marco; Casillas, Ruben; Tykwinski, Rik R.; Costa, Ruben D.; Guldi, Dirk M.
Hybrid Dye-Titania Nanoparticles for Superior Low-Temperature Dye-Sensitized Solar Cells
Kunzmann, Andreas; Valero, Silvia; Sepulveda, Angel E.; Rico-Santacruz, Marisa; Lalinde, Elena; Berenguer, Jesus R.; Garcia-Martinez, Javier; Guldi, Dirk M.; Serrano, Elena; Costa, Ruben D.
Rationalizing Fabrication and Design Toward Highly Efficient and Stable Blue Light-Emitting Electrochemical Cells Based on NHC Copper(I) Complexes
Weber, Michael D.; Fresta, Elisa; Elie, Margaux; Miehlich, Matthias E.; Renaud, Jean-Luc; Meyer, Karsten; Gaillard, Sylvain; Costa, Ruben D.
Role of lignin nanoparticles in UV resistance, thermal and mechanical performance of PMMA nanocomposites prepared by a combined free-radical graft polymerization/masterbatch procedure
Yang, Weijun; Rallini, Marco; Wang, De-Yi; Gao, Daqian; Dominici, Franco; Torre, Luigi; Kenny, Jose M.; Puglia, Debora
The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
Tan, W.; Naya, F.; Yang, L.; Chang, T.; Falzon, B. G.; Zhan, L.; Molina-Aldareguia, J. M.; Gonzalez, C.; Llorca, J.
Mechanical properties of aluminosilicate fiber heat-treated from 800 degrees C to 1400 degrees C: Effects of phase transition, grain growth and defects
Jiang, Ru; Liu, Haitao; Yang, Lingwei; Sun, Xun; Cheng, Haifeng
Effect of layer thickness on the mechanical behaviour of oxidation-strengthened Zr/Nb nanoscale multilayers
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Molina-Aldareguia, J. M.; LLorca, J.
Physical Simulation of Investment Casting of Complex Shape Parts
Rahimian, Mehdi; Milenkovic, Srdjan; Maestro, Laura; Eguidazu Ruiz De Azua, Aitor; Sabirov, Ilchat
Synthesis of Binaphthyl-Based Push-Pull Chromophores with Supramolecularly Polarizable Acceptor Ends
Coluccini, Carmine; Terraneo, Giancarlo; Pasini, Dario
Influence of the IR-mirror layer composition in the mechanical properties of solar selective coatings made from Mo:Si3N4 cermet
Alvarez-Fraga, L.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sanchez-Garcia, J. A.; Cespedes, E.; Escobar-Galindo, R.; Prieto, C.
Insights into the production and characterization of electrospun fibers from regenerated silk fibroin
Solanas, Concepcion; Herrero, Sara; Dasari, Aravind; Plaza, Gustavo R.; Llorca, Javier; Perez-Rigueiro, Jose; Elices, Manuel; Guinea, Gustavo V.
Microvials with tungsten nanowire arrays
Drensler, Stefanie; Milenkovic, Srdjan; Hassel, Achim Walter
Landau model of the microstructure and shape memory properties of cubic-monoclinic-II martensite
Lee, Dong-Wook; Xu, Guanglong; Cui, Yuwen
UNMODIFIED LDH AS REINFORCING FILLER FOR XNBR AND THE DEVELOPMENT OF FLAME-RETARDANT ELASTOMER COMPOSITES
Basu, Debdipta; Das, Amit; George, Jinu Jacob; Wang, De-Yi; Stoekelhuber, Klaus Werner; Wagenknecht, Udo; Leuteritz, Andreas; Kutlu, Burak; Reuter, Uta; Heintrich, Gert
Effect of processing conditions on microstructural features in Mn-Si sintered steels
Oro, Raquel; Hryha, Eduard; Campos, Monica; Torralba, Jose M.
Computational diffusion kinetics and its applications in study and design of rare metallic materials
Cui, Yuwen; Xu, Guanglong; Chen, Yi; Tang, Bin; Li, Jinshan; Zhou, Lian
Modeling of boron diffusion in silicon-germanium alloys using Kinetic Monte Carlo
Dopico, Ignacio; Castrillo, Pedro; Martin-Bragado, Ignacio
Atomistic investigation of the impact of stress during solid phase epitaxial regrowth
Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Rivallin, Pierrette; Tavernier, Clement; Cristoloveanu, Sorin; Martin-Bragado, Ignacio
PHYSICAL SIMULATION OF COLD ROLLING OF ULTRA-FINE GRAINED AL 5083 ALLOY TO STUDY MICROSTRUCTURE EVOLUTION
Murashkin, M. Yu.; Enikeev, N. A.; Kazykhanov, V. U.; Sabirov, I.; Valiev, R. Z.
Experimental Investigation and Thermodynamic Modeling for the Mg-Nd-Sr System
Xu, Guanglong; Cui, Yuwen; Zeng, Lijun; Tao, Xiaoma; Liu, Libin; Jin, Zhanpeng
Effect of strain rate on impact response and omega transformation of quenched Zr-Nb alloys
Wang, Yinghao; Tang, Bin; Cui, Y-W.; Kou, Hongchao; Li, Jinshan
Influence of device architecture on junction leakage in low-temperature process FDSOI MOSFETs
Sklenard, Benoit; Batude, Perrine; Rafhay, Quentin; Martin-Bragado, Ignacio; Xu, Cuiqin; Previtali, Bernard; Colombeau, Benjamin; Khaja, Fareen-Adeni; Cristoloveanu, Sorin; Rivallin, Pierrette; Tavernier, Clement; Poiroux, Thierry
A theoretical study of the structure-property relations in ultra-fine metallic materials with fractal microstructures
Sabirov, I.; Yang, C.; Mullins, J.; Hodgson, P. D.
Effect of Accumulative Roll Bonding on Plastic Flow Properties of Commercially Pure Zirconium
Sabirov, I.; Molina-Aldareguia, J. M.; Jiang, L.; Kassner, M. E.; Perez-Prado, M. T.
Continuum modeling of the reverse Hall-Petch effect in nanocrystalline metals under uniaxial tension: how many grains in a finite element model?
Jerusalem, Antoine
Computational study of atomic mobility for the bcc phase of the U-Pu-Zr ternary system
Li, Weibang; Hu, Rui; Cui, Y. -W.; Zhong, Hong; Chang, Hui; Li, Jinshan; Zhou, Lian
A hybrid molecular photoanode for efficient light – induced water oxidation
Grau, Sergi; Berardi, Serena; Moya, Alicia; Matheu, Roc; Cristino, Vito; Jose Vilatela, Juan; Bignozzi, Carlo A.; Caramori, Stefano; Gimbert-Surinach, Carolina; Llobet, Antoni
Branched 1,6-Diaminohexane-Derived Aliphatic Polyamine as Curing Agent for Epoxy: Isothermal Cure, Network Structure, and Mechanical Properties
Wan, Jintao; Li, Cheng; Fang, Hong; Li, Bo-Geng
Modeling adsorption of brominated, chlorinated and mixed bromo/chloro-dibenzo-p-dioxins on C-60 fullerene using Nano-QSPR
Urbaszek, Piotr; Gajewicz, Agnieszka; Sikorska, Celina; Haranczyk, Maciej; Puzyn, Tomasz
Indirect improvement of high temperature mechanical properties of a Mg-based alloy Elektron2l by addition of AIN nanoparticles
Daudin, R.; Terzi, S.; Mallmann, C.; Martin, R. Sanchez; Lhuissier, P.; Boller, E.; Pacureanu, A.; Katsarou, L.; Dieringa, H.; Salvo, L.
Multifunctional Nano-engineered Polymer Surfaces with Enhanced Mechanical Resistance and Superhydrophobicity
Hernandez, Jaime J.; Monclus, Miguel A.; Navarro-Baena, Ivan; Viela, Felipe; Molina-Aldareguia, Jon M.; Rodriguez, Isabel
Fabric compaction and infiltration during vacuum-assisted resin infusion with and without distribution medium
Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier
Influence of free surfaces on microstructure evolution of radiation damage in Fe from molecular dynamics and object kinetic Monte Carlo calculations
Aliaga, Maria J.; Dopico, Ignacio; Martin-Bragado, Ignacio; Caturla, Maria J.
Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding
Amirkhanlou, Sajjad; Rahimian, Mehdi; Ketabchi, Mostafa; Parvin, Nader; Yaghinali, Parisa; Carreno, Fernando
Characterization of catalytic materials with scanning photoelectron microscopy: Present and future
Amati, M.; Aleman, B.; Bozzini, B.; Gregoratti, L.; Sezen, H.; Kiskinova, M.
X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear
Sket, F.; Enfedaque, A.; Diaz Lopez, C.; Gonzalez, C.; Molina-Aldareguia, J.; LLorca, J.
The role of mesophases in the ordering of polymers
Perez, E.; Cerrada, M. L.; Garcia-Penas, A.; Gomez-Elvira, J. M.; Fernandez-Blazquez, J. P.; Martinez-Gomez, A.; Lopez-Velazquez, D.; Martinez, J. C.
On the role of processing parameters in sintered new Co-based (W,Al) alloys
Carton-Cordero, M.; Srinivasarao, B.; Campos, M.; Garcia-Junceda, A.; Torralba, J. M.
Predicting epitaxial orientations and lattice structure in ultrathin magnetic thin films
Lu, Yong; Wang, Cuiping; Shi, Rongpei; Cui, Yuanyuan; Shi, Zhan; Yang, Shuiyuan; Cui, Yuwen; Liu, Xingjun
Landau modeling of dynamical nucleation of martensite at grain boundaries under local stress
Xu, Guanglong; Wang, Chuanyun; Ignacio Beltran, Juan; LLorca, Javier; Cui, Yuwen
A numerical method for the time coarsening of transport processes at the atomistic scale
Gonzalez-Ferreiro, B.; Romero, I.; Ortiz, M.
Atomistic modeling of epitaxial growth of semiconductor materials
Martin-Bragado, Ignacio; Sarikov, Andrey
Development of tool for physical simulation of skin formation during investment casting of nickel-based superalloys
Rahimian, M.; Milenkovic, S.; Maestro, L.; Ruiz De Azua, A. Eguidazu; Sabirov, I.
Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
Munoz, R.; Gonzalez, C.; Llorca, J.
Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law
Czel, Gergely; Jalalvand, Meisam; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier
Effect of Zirconium on the Microstructure and Mechanical Properties of an Al-Alloyed ODS Steel Consolidated by FAHP
Garcia-Junceda, Andrea; Garcia-Rodriguez, Nerea; Campos, Monica; Carton-Cordero, Marta; Torralba, Jose Manuel
Synchronous parallel Kinetic Monte Carlo: Implementation and results for object and lattice approaches
Martin-Bragado, Ignacio; Abujas, J.; Galindo, P. L.; Pizarro, J.
Phase equilibria in Mg-rich corner of Mg-Ca-RE (RE=Gd, Nd) systems at 400 degrees C
Fei, Hou-jun; Xu, Guang-long; Liu, Li-bin; Bo, Hong; Zeng, Li-jun; Chen, Cui-ping
DAMAGE LOCALIZATION AND FAILURE LOCUS UNDER BIAXIAL LOADING IN GLASS-FIBER NONWOVEN FELTS
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Multi-scale homogenization-based modeling of semi-crystalline polymers
Agoras, M.; Ponte Castaneda, P.
Nanostructuring of Ultra-Thin HfO(2) Layers for High-k/III-V Device Application
Benedicto, M.; Anguita, J.; Alvaro, R.; Galiana, B.; Molina-Aldereguia, J. M.; Tejedor, P.
Characterization of creep and creep damage by in-situ microtomography
Borbely, Andras; Dzieciol, Krzysztof; Sket, Federico; Isaac, Augusta; di Michiel, Marco; Buslaps, Thomas; Kaysser-Pyzalla, Anke R.
Strength and toughness of cellular SiC at elevated temperature
Presas, M.; Pastor, J. Y.; LLorca, J.; Martin, A.; Segurado, J.; Gonzalez, C.
Deformation mechanisms in an ultra-fine grained Al alloy
Sabirov, Ilchat; Barnett, Matthew R.; Estrin, Yuri; Timokhina, Ilana; Hodgson, Peter D.
Modelling of the mechanical behavior of polyurethane foams by means of micromechanical characterization and computational homogenization
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
Merging Biology and Solid-State Lighting: Recent Advances in Light-Emitting Diodes Based on Biological Materials
Fresta, Elisa; Fernandez-Luna, Veronica; Coto, Pedro B.; Costa, Ruben D.
A carbon science perspective in 2018: Current achievements and future challenges
Bianco, Alberto; Chen, Yongsheng; Chen, Yuan; Ghoshal, Debjit; Hurt, Robert H.; Kim, Yoong Ahm; Koratkar, Nikhil; Meunier, Vincent; Terrones, Mauricio
The cavitation erosion of ultrasonic sonotrode during large-scale metallic casting: Experiment and simulation
Tian, Yang; Liu, Zhilin; Li, Xiaoqian; Zhang, Lihua; Li, Ruiqing; Jiang, Ripeng; Dong, Fang
An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
Haouala, Sarra; Segurado, Javier; LLorca, Javier
Modelling and simulation methodology for unidirectional composite laminates in a Virtual Test Lab framework
Falco, O.; Avila, R. L.; Tijs, B.; Lopes, C. S.
High throughput analysis of solute effects on the mechanical behavior and slip activity of beta titanium alloys
Wang, C. Y.; Yang, L. W.; Cui, Y. -W.; Perez-Prado, M. T.
Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy
Bugelnig, Katrin; Sket, Federico; Germann, Holger; Steffens, Thomas; Koos, Robert; Wilde, Fabian; Boller, Elodie; Requena, Guillermo
Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature
Yang, L. W.; Mayer, C.; Li, N.; Baldwin, J. K.; Mara, N. A.; Chawla, N.; Molina-Aldareguia, J. M.; Llorca, J.
Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness
Snel, J.; Monclus, M. A.; Castillo-Rodriguez, M.; Mara, N.; Beyerlein, I. J.; Llorca, J.; Molina-Aldareguia, J. M.
From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
Tourret, D.; Mertens, J. C. E.; Lieberman, E.; Imhoff, S. D.; Gibbs, J. W.; Henderson, K.; Fezzaa, K.; Deriy, A. L.; Sun, T.; Lebensohn, R. A.; Patterson, B. M.; Clarke, A. J.
Fabrication of low-fire-hazard flexible poly (vinyl chloride) via reutilization of heavy metal biosorbents
Pan, Ye-Tang; Wang, De-Yi
Effect on thermal and combustion behaviors of montmorillonite intercalation nickel compounds in polypropylene/IFR system
Kong, Qinghong; Zhang, Hongkai; Zheng, Lu; Wang, De-Yi; Zhang, Junhao
Onset of room temperature ferromagnetism by plastic deformation in three paramagnetic pure metals
Cepeda-Jimenez, C. M.; Hernando, A.; Barandiaran, J. M.; Perez-Prado, M. T.
An atomistic investigation of the composition dependence in SiGe alloys during Solid Phase Epitaxial Regrowth
Payet, Anthony; Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Tavernier, Clement; Gergaud, Patrice; Martin-Bragado, Ignacio
Ultra-fine grained pure Titanium for biomedical applications
Mora-Sanchez, H.; Sabirov, I.; Monclus, M. A.; Matykina, E.; Molina-Aldareguia, J. M.
Tailoring master alloys for liquid phase sintering: Effect of introducing oxidation-sensitive elements
Calderon, Raquel De Oro; Bernardo, Elena; Campos, Monica; Gierl-Mayer, Christian; Danninger, Herbert; Torralba, Jose M.
Multiscale tomographic analysis of heterogeneous cast Al-Si-X alloys
Asghar, Z.; Requena, G.; Sket, F.
Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys
Gunderov, D. V.; Maksutova, G.; Churakova, A.; Lukyanov, A.; Kreitcberg, A.; Raab, G. I.; Sabirov, I.; Prokoshkin, S.
Formation of size-controlled and luminescent Si nanocrystals from SiOxNy/Si3N4 hetero-superlattices
Zelenina, A.; Sarikov, A.; Gutsch, S.; Zakharov, N.; Werner, P.; Reichert, A.; Weiss, C.; Zacharias, M.
Investigation of thermophysical, electronic and lattice dynamic properties for CaX2Si2 (X = Ni, Zn, Cu, Ag, Au) via first-principles calculations
Tao, Xiaoma; Guo, Zifeng; Xu, Guanglong; Wang, Rongcheng; Chen, Hongmei; Ouyang, Yifang
Interdiffusion in FCC Co-Al-Ti Ternary Alloys
Chen, Yi; Li, Jinshan; Tang, Bin; Xu, Guanglong; Kou, Hongchao; Cui, Yuwen
In situ tomographic investigation of damage development in +/- 45 degrees carbon fibre reinforced laminates
Sket, F.; Rodriguez-Hortala, M.; Molina-Aldareguia, J. M.; Llorca, J.; Maire, E.; Requena, G.
Neurite, a Finite Difference Large Scale Parallel Program for the Simulation of Electrical Signal Propagation in Neurites under Mechanical Loading
Garcia-Grajales, Julian A.; Rucabado, Gabriel; Garcia-Dopico, Antonio; Pena, Jose-Maria; Jerusalem, Antoine
RETRACTED: Atomistic simulation of damage accumulation and amorphization in Ge(Retracted article.See vol.121,ARTN 049901,2017)
Gomez-Selles, Jose L.; Claverie, Alain; Sklenard, Benoit; Benistant, Francis; Martin-Bragado, Ignacio
Mono- and dinuclear europium(III) complexes with thenoyltrifluoroacetone and 1,10-phenanthroline-5,6-dione
Zhang, Xiao-Fang; Xu, Cun-Jin; Wan, Jintao
Microstructure evolution and mechanical behavior of as-cast, heat treated and directionally solidified Fe-15Al-10Nb alloys
Yang, Guang; Milenkovic, Srdjan