4D printed Nitinol metamaterials: from algorithmic design of textile-based soft-stiff architectures towards next-generation medical implants Author/s: Carlos Aguilar VegaDirector/s: Andrés Díaz LantadaDefence Date: 21/05/2026Ph.D. Awarding Institution: School of Industrial Engineering,
Deformation and crack initiation mechanisms under low-cycle fatigue in Ni-based supperalloys Author/s: Ignacio EscobarDirector/s: Javier LLorca MartínezDefence Date: 24/04/2026Ph.D. Awarding Institution: School of Civil Engineering, Technical University of Madrid Abstract Ni-based
Construction of efficient intumescent flame-retardant systems based on multi-group synergy: properties and mechanism in polypropylene Author/s: Wei TangDirector/s: De Yi Wang and Silvia González ProlongoDefence Date: 23/1/2026Ph.D. Awarding Institution: Rey Juan Carlos
Laser powder bed fusion of soft magnetic metallic glasses. A fundamental study on the interplay between processing conditions, defects, microstructure and properties Author/s: Marcos Rodríguez SánchezDirector/s: Mária Teresa Pérez PradoDefence Date: 06/03/2026Ph.D. Awarding Institution: Marcos
The preparation, characterisation and properties of high-performance, bio-based epoxy vitrimers and fiber-reinforced composites Author/s: Meihui ZhouDirector/s: De Yi Wang and Silvia González ProlongoDefence Date: 18/1/2023Ph.D. Awarding Institution: Rey Juan Carlos
Fire-safe lithium-ion batteries: material assessment and mechanism Author/s: Mingyang ZhangDirector/s: De Yi WangDefence Date: 20/11/2025Ph.D. Awarding Institution: School of Civil Engineering, Technical University of Madrid PDF
Laser powder bed fusion of Inconel 939: from parameter optimization to microstructural design Author/s: Ignacio Rodríguez BarberDirector/s: María Teresa Pérez PradoDefence Date: 12/09/2025Ph.D. Awarding Institution: Carlos III University of
Exploring the physics of rapid solidification microstructures from additive manufacturing of metallic alloys using phase-field modelling Author/s: José ManciasDirector/s: Damien TourretDefence Date: 27/08/2025Ph.D. Awarding Institution: Texas A&M University Abstract This
Development of 3D-printed biodegradable polymer scaffolds for osteochondral tissue engineering Author/s: Yuyao LiuDirector/s: Javier LLorca and Mónica Echeverry RendónDefence Date: 23/6/2025Ph.D. Awarding Institution: School of Civil Engineering, Technical University of
Influence of the microstructure on the deformation mechanisms of wrought Mg alloys Author/s: Biaobiao YangDirector/s: Javier LLorcaDefence Date: 18/1/2023Ph.D. Awarding Institution: School of Civil Engineering, Technical University of
Predicting the fire performance of flame-retardant polymer composites with a data-driven approach Author/s: Junchen XiaoDirector/s: De Yi WangDefence Date: 26/2/2025Ph.D. Awarding Institution: School of Civil Engineering, Technical University of
Predicting properties of polymer materials using machine learning methods Author/s: Elaheh KazemiDirector/s: Maciej Haranczyk and Carlos GonzálezDefence Date: 18/2/2025Ph.D. Awarding Institution: School of Civil Engineering, Technical University of
Analysis of the mechanical behaviour of PA12 lattice materials fabricated by additive manufacturing Author/s: Lucía CobianDirector/s: Javier Segurado and Miguel MonclúsDefence Date: 6/2/2025Ph.D. Awarding Institution: School of Civil Engineering, Technical University of
Expanding the floating catalyst synthesis of inorganic 1D nanomaterials and their assembly into macroscopic networks Author/s: Isabel GómezDirector/s: Juan José Vilatela and Álvaro Ridruejo (UPM)Defence Date: 27/1/2025Ph.D. Awarding Institution: School of Civil Engineering, Technical
Facilitating development of special clays by incorporation of machine learning techniques Author/s: Giulia Lo DicoDirector/s: Maciej Haranczyk and Veronica Carcelén (UAM)Defence Date: 12/06/2023Ph.D. Awarding Institution: Carlos III University of
Fatigue behavior and fatigue crack initiation micromechanism of rolled AZ31 Mg alloy Author/s: Syed Abbas JamiliDirector/s: Javier LLorca and Anxin MaDefence Date: 18/1/2023Ph.D. Awarding Institution: School of Civil Engineering, Technical University of
Development of Ti-Fe-based powders for laser additive manufacturing of ultrafine lamellar eutectics Author/s: Akshya Kumar Pandey Director/s: Srdjan Milenkovic and Federico SketDefence Date: 14/09/2023Ph.D. Awarding Institution: Universidad Carlos III de
Binder Jetting: A microstructural perspective Author/s: Sergi Bafaluy OjeaDirector/s: María Teresa Pérez Prado and Federico SketDefence Date: 22/09/2023Ph.D. Awarding Institution: Universidad Carlos III de Madrid PDF
Advanced deep learning technologies for the smart manufacturing of structural composites Author/s: Joaquín FernándezDirector/s: Luis Baumela (UPM) and Carlos GonzálezDefence Date: 4/10/2023Ph.D. Awarding Institution: School of Computer Engineering, Technical University of
