Pineau, A.; Guillemot, G.; Tourret, D.; Karma, A.; Gandin, Ch. -A.
Menu
A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy
Rodriguez-Veiga, A.; Bellon, B.; Papadimitriou, I.; Esteban-Manzanares, G.; Sabirov, I.; LLorca, J.
Lattice kinetic Monte Carlo modeling of germanium solid phase epitaxial growth
Gomez-Selles, J. L.; Darby, B. L.; Jones, K. S.; Martin-Bragado, I.
Two-pheromone Ant Colony Optimization to design dispersed laminates for aeronautical structural applications
Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Mayugo, J. A.; Costa, J.
Dimensional consistency achieved in high-performance synchronizing hubs
Garcia, P.; Campos, M.; Torralba, J. M.
Dynamic deformation of high pressure die-cast magnesium alloys
Dudamell, N. V.; Galvez, F.; Perez-Prado, M. T.
Modeling of Incommensurate omega Structure in the Zr-Nb Alloys
Tang, Bin; Cui, Y. -W.; Chang, Hui; Kou, Hongchao; Li, Jinshan; Zhou, Lian
Influence of hygrothermal aging on the mechanical properties of Nylon 12 composites processed by selective laser sintering
Seltzer, R.; Segurado Escudero, J.; de la Escalera Cutillas, F. Martin
Quantification of hardening in Fe-Mn master alloys prepared by a mechanical alloying process via nanoindentation experiments
Sicre-Artalejo, Jose; Campos, Monica; Molina-Aldareguia, Jon M.; Torralba, Jose M.
Tearing and Delaminating of a Polymer Laminate
Kao-Walter, S.; Walter, M.; Dasari, A.; Leon, A.
VIRTUAL MECHANICAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
LLorca, Javier; Gonzalez, Carlos
Continuum modeling of {10(1)over-bar2} twinning in a Mg-3%Al-1%Zn rolled sheet
Jerusalem, A.; Fernandez, A.; Perez-Prado, M. T.
Virtual fracture testing of composite materials and structures
LLorca, Javier; Cox, Brian N.
Mechanical behavior and microstructure evolution of a quenched and partitioned steel during drop weight impact and punch testing
Xia, Peikang; Sabirov, Ilchat; Molina-Aldareguia, Jon; Verleysen, Patricia; Petrov, Roumen
Interfacial engineering of layered double hydroxide toward epoxy resin with improved fire safety and mechanical property
Li, Zhi; Liu, Zhiqi; Dufosse, Francois; Yan, Luke; Wang, De-Yi
H2O2/UV layer-by-layer oxidation of multiwall carbon nanotubes: The onion effect and the control of the degree of surface crystallinity and diameter
Gonzalez, Viviana Jehova; Vega-Diaz, Sofia Magdalena; Morelos-Gomez, Aaron; Fujisawa, Kazunori; Endo, Morinobu; Cadiz, Olga Martin; Llido, Juan Baselga; Terrones, Mauricio
Transferrable polymeric carbon nitride/nitrogen-doped graphene films for solid state optoelectronics
Gan, Xin; Lv, Ruitao; Zhang, Tianyi; Zhang, Fu; Terrones, Mauricio; Kang, Feiyu
The effect of manganese additions on the high temperature oxidation behaviour of the high-vanadium cast iron
Chen, Pinghu; Liu, Zhilin; Li, Ruiqing; Li, Xiaoqian
Origin of Degradation in Si-Based All-Solid-State Li-Ion Microbatteries
Chen, Chunguang; Oudenhoven, Jos F. M.; Danilov, Dmitri L.; Vezhlev, Egor; Gao, Lu; Li, Na; Mulder, Fokko M.; Eichel, Ruediger-A.; Notten, Peter H. L.
Emerging Materials in Heterogeneous Electrocatalysis Involving Oxygen for Energy Harvesting
Rana, Moumita; Mondal, Sanjit; Sahoo, Lipipuspa; Chatterjee, Kaustav; Karthik, Pitchiah E.; Gautam, Ujjal K.
Surface Chemistry Analysis of Carbon Nanotube Fibers by X-Ray Photoelectron Spectroscopy
Aleman, Belen; Vila, Maria; Vilatela, Juan J.
A novel oligomer containing DOPO and ferrocene groups: Synthesis, characterization, and its application in fire retardant epoxy resin
Wen, Yi; Cheng, Zhou; Li, Wenxiong; Li, Zhi; Liao, Duijun; Hu, Xiaoping; Pan, Ning; Wang, Deyi; Hull, T. Richard
Numerical simulation of the ballistic response of needle-punched nonwoven fabrics
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; Llorca, J.
The Effect of a Semi-Industrial Masterbatch Process on the Carbon Nanotube Agglomerates and Its Influence in the Properties of Thermoplastic Carbon Nanotube Composites
Herrera-Ramirez, Luis C.; Castell, Pere; Castillo-Rodriguez, Miguel; Fernandez, Angel; Guzman de Villoria, Roberto
Controlling the high temperature mechanical behavior of Al alloys by precipitation and severe straining
Cepeda-Jimenez, C. M.; Castillo-Rodriguez, M.; Molina-Aldareguia, J. M.; Huang, Y.; Langdon, T. G.; Perez-Prado, M. T.
Bio-based carbonaceous composite materials from epoxidised linseed oil, bio-derived curing agent and starch with controllable functionality
Supanchaiyamat, N.; Shuttleworth, P. S.; Sikhom, C.; Chaengkham, S.; Yue, H-B.; Fernandez-Blazquez, J. P.; Budarin, V. L.; Hunt, A. J.
Response to Comment on ‘Thickness and temperature depending intermixing of SiOx/SiO2 and SiOxNy/SiO2 superlattices: Experimental observation and thermodynamic modeling’ [Appl. Phys. Lett. 109, 166101 (2016)]
Zhigunov, D. M.; Sarikov, A.; Chesnokov, Yu. M.; Vasiliev, A. L.; Zakharov, N.; Kashkarov, P. K.
Hydrogen behavior in Al-Cr alloys: Synchrotron-based photoelectron microscopy of the rapidly solidified structure
Tashlykova-Bushkevich, Iya I.; Amati, Matteo; Aleman, Belen; Sezen, Hikmet; Gregoratti, Luca; Kiskinova, Maya
Time dependent modeling of single particle displacement damage in silicon devices
Tang, Du; Martin-Bragado, Ignacio; He, Chaohui; Zang, Hang; Xiong, Cen; Li, Yonghong; Guo, Daxi; Zhang, Peng; Zhang, Jinxin
Exploring phase stability, electronic and mechanical properties of Ce-Pb intermetallic compounds using first-principles calculations
Tao, Xiaoma; Wang, Ziru; Lan, Chunxiang; Xu, Guanglong; Ouyang, Yifang; Du, Yong
A 3D dislocation dynamics analysis of the size effect on the strength of [111] LiF micropillars at 300K and 600K
Chang, Hyung-Jun; Segurado, Javier; Molina-Aldareguia, Jon M.; Soler, Rafael; LLorca, Javier
Damage accumulation during cryogenic and room temperature implantations in strained SiGe alloys
Payet, Anthony; Luce, Flavia Piegas; Curfs, Caroline; Mathieu, Benoit; Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Joblot, Sylvain; Tavernier, Clement; Colombeau, Benjamin; Guissi, Sofiene; Martin-Bragado, Ignacio; Gergaud, Patrice
Microstructure Evolution in Fe and Fe-Cr Alloys with OKMC Methods
Caturla, Maria J.; Aliaga, Maria J.; Martin-Bragado, Ignacio; Dopico, Ignacio; Malerba, Lorenzo; Hernandez-Mayoral, Mercedes
High-Temperature Micropillar Compression Creep Testing of Constituent Phases in Lead-Free Solder
Mayer, Carl R.; Lotfian, Saeid; Molina-Aldareguia, Jon; Chawla, Nikhilesh
Crystal Plasticity Finite Element Simulations for Single Phase Titanium Alloys: Effect of Polycrystalline Aggregate Features on the Mechanical Response
Tang Bin; Xie Shao; Liu Yi; Han Fengbo; Kou Hongchao; Li Jinshan
Enhanced Impact Energy Absorption Characteristics of Sandwich Composites through Tufting
Henao, Anamaria; Guzman de Villoria, Roberto; Cuartero, Jesus; Carrera, Marco; Picon, Juan; Miravete, Antonio
Effect of Q&P parameters on microstructure development and mechanical behaviour of Q&P steels
De Diego-Calderon, Irene; De Knijf, Dorien; Molina-Aldareguia, Jon M.; Sabirov, Ilchat; Fojer, Cecilia; Petrov, Roumen
Study of the Synergistic Effect of Nanoporous Nickel Phosphates on Novel Intumescent Flame Retardant Polypropylene Composites
Nie, Shibin; Zhang, Chi; Peng, Chao; Wang, De-yi; Ding, Daowei; He, Qingliang
Mechanical alloying and field assisted hot pressing of nanocrystalline B2-NiAl intermetallic compound
Varona-Caballero, A.; Milenkovic, S.; Jabbari-Taleghani, M. A.; Monge, M. A.
Mechanical and functional properties of Invar alloy for mu-MIM
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
A physical simulation study of the effect of thermal variations on the secondary dendrite arm spacing in a Ni-based superalloy
Rahimian, Mehdi; Milenkovic, Srdjan; Sabirov, Ilchat
Deformation behaviour of a commercial pure titanium alloy during hot compression testing
Chao, Qi; Beladi, Hossein; Sabirov, Ilchat; Hodgson, Peter D.
Porphyrins as Multifunctional Interconnects in Networks of ZnO Nanoparticles and their Application in Dye-Sensitized Solar Cells
Duering, Jasmin; Kunzmann, Andreas; Killian, Manuela S.; Costa, Ruben D.; Guldi, Dirk M.; Groehn, Franziska
Effect of phytic acid-modified layered double hydroxide on flammability and mechanical properties of intumescent flame retardant polypropylene system
Kalali, Ehsan Naderi; Montes, Anabel; Wang, Xin; Zhang, Lu; Shabestari, Marjan E.; Li, Zhi; Wang, De-Yi
Cutting Materials in Half: A Graph Theory Approach for Generating Crystal Surfaces and Its Prediction of 2D Zeolites
Witman, Matthew; Ling, Sanliang; Boyd, Peter; Barthel, Senja; Haranczyk, Maciej; Slater, Ben; Smit, Berend
Enhanced Electro-Fenton Mineralization of Acid Orange 7 Using a Carbon Nanotube Fiber-Based Cathode
Thi Xuan Huong Le; Aieman, Beien; Vilatela, Juan J.; Bechelany, Mikhael; Cretin, Marc
Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves
Senokos, Evgeny; Ou, Yunfu; Jose Torres, Juan; Sket, Federico; Gonzalez, Carlos; Marcilla, Rebeca; Vilatela, Juan J.
Understanding the high temperature reversed yield asymmetry in a Mg-rare earth alloy by slip trace analysis
Cepeda-Jimenez, C. M.; Prado-Martinez, C.; Perez-Prado, M. T.
Cobalt Nanoparticles Chemically Bonded to Porous Carbon Nanosheets: A Stable High-Capacity Anode for Fast-Charging Lithium-Ion Batteries
Etacheri, Vinodkumar; Hong, Chulgi Nathan; Tang, Jialiang; Pol, Vilas G.
Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach
Garcia-Carpintero, A.; van den Beuken, B. N. G.; Haldar, S.; Herraez, M.; Gonzalez, C.; Lopes, C. S.
Triboelectric nanogenerator as self-powered impact sensor
Garcia, Cristobal; Trendafilova, Irina; Guzman de Villoria, Roberto; Sanchez del Rio, Jose
Development of Duplex Stainless Steels by Field-Assisted Hot Pressing: Influence of the Particle Size and Morphology of the Powders on the Final Mechanical Properties
Garcia-Junceda, A.; Rinon, M.; Torralba, J. M.
Energy-entropy-momentum integration schemes for general discrete non-smooth dissipative problems in thermomechanics
Portillo, D.; Garcia Orden, J. C.; Romero, I.
Iodine-Pseudohalogen Ionic Liquid-Based Electrolytes for Quasi-Solid-State Dye-Sensitized Solar Cells
Lennert, Annkatrin; Sternberg, Michelle; Meyer, Karsten; Costa, Ruben D.; Guldi, Dirk M.
Review of Grain Refinement of Cast Metals Through Inoculation: Theories and Developments
Liu, Zhilin
A novel high symmetry interlocking micro-architecture design for polymer composites with improved mechanical properties
Haldar, Sandip; Sain, Trisha; Ghosh, Susanta
Mapping of Diffusion and Nanohardness Properties of Fcc Co-Al-V Alloys Using Ternary Diffusion Couples
Wang, Chuanyun; Xu, Guanglong; Cui, Yuwen
The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys
Hu, Libin; Zhan, Lihua; Liu, Zhilin; Shen, Rulin; Yang, Youliang; Ma, Ziyao; Liu, Ming; Liu, Jian; Yang, Yingge; Wang, Xun
The effect of the pre-heating stage on the microstructure and texture of a cold rolled FeCMnAlSi steel under conventional and ultrafast heating
Castro Cerda, F. M.; Goulas, C.; Sabirov, I.; Kestens, L. A. I.; Petrov, R. H.
Effect of SPD processing on mechanical behavior and dynamic strain aging of an Al-Mg alloy in various deformation modes and wide strain rate range
Valdes-Tabernero, M. A.; Sancho-Cadenas, R.; Sabirov, I.; Murashkin, M. Yu; Ovid'ko, I. A.; Galvez, F.
Effect of tea saponin-based intumescent flame retardant on thermal stability, mechanical property and flame retardancy of natural rubber composites
Wang, Na; Hu, Lidong; Babu, Heeralal Vignesh; Zhang, Jing; Fang, Qinghong
Choosing the right nanoparticle size – designing novel ZnO electrode architectures for efficient dye-sensitized solar cells
Pfau, Markus W.; Kunzmann, Andreas; Segets, Doris; Peukert, Wolfgang; Wallace, Gordon G.; Officer, David L.; Clark, Tim; Costa, Ruben D.; Guldi, Dirk M.
High-performance carrageenan film based on carrageenan intercalated layered double hydroxide with enhanced properties: Fire safety, thermal stability and barrier effect
Li, Zhi; Wang, Jiang; Fernandez Exposito, Daniel; Zhang, Jing; Fu, Can; Shi, Dean; Wang, De-Yi
Surrogate models of the influence of the microstructure on the mechanical properties of closed- and open-cell foams
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
Effect of Ultrafast Heating on the Properties of the Microconstituents in a Low-Carbon Steel
Valdes-Tabernero, M. A.; Vercruysse, F.; Sabirov, I.; Petrov, R. H.; Monclus, M. A.; Molina-Aldareguia, J. M.
Enhancements in mechanical and electrical properties of carbon nanotube films by SiC and C matrix bridging
Zhang, Xiaoshan; Yang, Lingwei; Liu, Haitao
Kinetic Diffusion Couple for Mapping Microstructural and Mechanical Data on Ti-Al-Mo Titanium Alloys
Chen, Yi; Kou, Hongchao; Cheng, Liang; Zhang, Yunlong; Yu, Yun; Lu, Yalin
Synthesis and anhydrous proton conductivity of doped azole functional PGMA-hBN nano-flakes
Yusuf, Abdulmalik; Celik, Sevim Unugur; Bozkurt, Ayhan
A multiscale methodology quantifying the sintering temperature-dependent mechanical properties of oxide matrix composites
Jiang, Ru; Yang, Lingwei; Liu, Haitao; Tan, Wei; Sun, Xun; Cheng, Haifeng; Mao, Weiguo
Interconnected metal oxide CNT fibre hybrid networks for current collector-free asymmetric capacitive deionization dagger
Santos, Cleis; Lado, Julio J.; Garcia-Quismondo, Enrique; Rodriguez, Ines, V; Hospital-Benito, Daniel; Palma, Jesus; Anderson, Marc A.; Vilatela, Juan J.
Invited paper: Kinetic diffusion multiple: A high-throughput approach to screening the composition-microstructure-micromechanical properties relationships
Mao, Shu; Wang, Chuanyun; Li, Na; Wang, Jingya; Chen, Yi; Xu, Guanglong; Guo, Yanhua; Cui, Yuwen
Enhanced strain rate sensitivity of Zr-based bulk metallic glasses subjected to high pressure torsion
Boltynjuk, E. V.; Gunderov, D. V.; Ubyivovk, E. V.; Monclus, M. A.; Yang, L. W.; Molina-Aldareguia, J. M.; Tyurin, A. I.; Kilmametov, A. R.; Churakova, A. A.; Churyumov, A. Yu.; Valiev, R. Z.
Improving charge injection and charge transport in CuO-based p-type DSSCs – a quick and simple precipitation method for small CuO nanoparticles
Langmar, Oliver; Ganivet, Carolina R.; Schol, Peter; Scharl, Tobias; de la Torre, Gema; Torres, Tomas; Costa, Ruben D.; Guldi, Dirk M.
Thermal-field effects on interface dynamics and microstructure selection during alloy directional solidification
Song, Y.; Tourret, D.; Mota, F. L.; Pereda, J.; Billia, B.; Bergeon, N.; Trivedi, R.; Karma, A.
Slip transfer across gamma-TiAl lamellae in tension
Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon
Tuning pentacene based dye-sensitized solar cells
Kunzmann, Andreas; Gruber, Marco; Casillas, Ruben; Tykwinski, Rik R.; Costa, Ruben D.; Guldi, Dirk M.
Hybrid Dye-Titania Nanoparticles for Superior Low-Temperature Dye-Sensitized Solar Cells
Kunzmann, Andreas; Valero, Silvia; Sepulveda, Angel E.; Rico-Santacruz, Marisa; Lalinde, Elena; Berenguer, Jesus R.; Garcia-Martinez, Javier; Guldi, Dirk M.; Serrano, Elena; Costa, Ruben D.
Rationalizing Fabrication and Design Toward Highly Efficient and Stable Blue Light-Emitting Electrochemical Cells Based on NHC Copper(I) Complexes
Weber, Michael D.; Fresta, Elisa; Elie, Margaux; Miehlich, Matthias E.; Renaud, Jean-Luc; Meyer, Karsten; Gaillard, Sylvain; Costa, Ruben D.
Role of lignin nanoparticles in UV resistance, thermal and mechanical performance of PMMA nanocomposites prepared by a combined free-radical graft polymerization/masterbatch procedure
Yang, Weijun; Rallini, Marco; Wang, De-Yi; Gao, Daqian; Dominici, Franco; Torre, Luigi; Kenny, Jose M.; Puglia, Debora
The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
Tan, W.; Naya, F.; Yang, L.; Chang, T.; Falzon, B. G.; Zhan, L.; Molina-Aldareguia, J. M.; Gonzalez, C.; Llorca, J.
Mechanical properties of aluminosilicate fiber heat-treated from 800 degrees C to 1400 degrees C: Effects of phase transition, grain growth and defects
Jiang, Ru; Liu, Haitao; Yang, Lingwei; Sun, Xun; Cheng, Haifeng
Effect of layer thickness on the mechanical behaviour of oxidation-strengthened Zr/Nb nanoscale multilayers
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Molina-Aldareguia, J. M.; LLorca, J.
Physical Simulation of Investment Casting of Complex Shape Parts
Rahimian, Mehdi; Milenkovic, Srdjan; Maestro, Laura; Eguidazu Ruiz De Azua, Aitor; Sabirov, Ilchat
Synthesis of Binaphthyl-Based Push-Pull Chromophores with Supramolecularly Polarizable Acceptor Ends
Coluccini, Carmine; Terraneo, Giancarlo; Pasini, Dario
Influence of the IR-mirror layer composition in the mechanical properties of solar selective coatings made from Mo:Si3N4 cermet
Alvarez-Fraga, L.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sanchez-Garcia, J. A.; Cespedes, E.; Escobar-Galindo, R.; Prieto, C.
Insights into the production and characterization of electrospun fibers from regenerated silk fibroin
Solanas, Concepcion; Herrero, Sara; Dasari, Aravind; Plaza, Gustavo R.; Llorca, Javier; Perez-Rigueiro, Jose; Elices, Manuel; Guinea, Gustavo V.
Microvials with tungsten nanowire arrays
Drensler, Stefanie; Milenkovic, Srdjan; Hassel, Achim Walter
Landau model of the microstructure and shape memory properties of cubic-monoclinic-II martensite
Lee, Dong-Wook; Xu, Guanglong; Cui, Yuwen
UNMODIFIED LDH AS REINFORCING FILLER FOR XNBR AND THE DEVELOPMENT OF FLAME-RETARDANT ELASTOMER COMPOSITES
Basu, Debdipta; Das, Amit; George, Jinu Jacob; Wang, De-Yi; Stoekelhuber, Klaus Werner; Wagenknecht, Udo; Leuteritz, Andreas; Kutlu, Burak; Reuter, Uta; Heintrich, Gert
Effect of processing conditions on microstructural features in Mn-Si sintered steels
Oro, Raquel; Hryha, Eduard; Campos, Monica; Torralba, Jose M.
Computational diffusion kinetics and its applications in study and design of rare metallic materials
Cui, Yuwen; Xu, Guanglong; Chen, Yi; Tang, Bin; Li, Jinshan; Zhou, Lian
Modeling of boron diffusion in silicon-germanium alloys using Kinetic Monte Carlo
Dopico, Ignacio; Castrillo, Pedro; Martin-Bragado, Ignacio
Atomistic investigation of the impact of stress during solid phase epitaxial regrowth
Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Rivallin, Pierrette; Tavernier, Clement; Cristoloveanu, Sorin; Martin-Bragado, Ignacio
PHYSICAL SIMULATION OF COLD ROLLING OF ULTRA-FINE GRAINED AL 5083 ALLOY TO STUDY MICROSTRUCTURE EVOLUTION
Murashkin, M. Yu.; Enikeev, N. A.; Kazykhanov, V. U.; Sabirov, I.; Valiev, R. Z.
Experimental Investigation and Thermodynamic Modeling for the Mg-Nd-Sr System
Xu, Guanglong; Cui, Yuwen; Zeng, Lijun; Tao, Xiaoma; Liu, Libin; Jin, Zhanpeng
Effect of strain rate on impact response and omega transformation of quenched Zr-Nb alloys
Wang, Yinghao; Tang, Bin; Cui, Y-W.; Kou, Hongchao; Li, Jinshan
Influence of device architecture on junction leakage in low-temperature process FDSOI MOSFETs
Sklenard, Benoit; Batude, Perrine; Rafhay, Quentin; Martin-Bragado, Ignacio; Xu, Cuiqin; Previtali, Bernard; Colombeau, Benjamin; Khaja, Fareen-Adeni; Cristoloveanu, Sorin; Rivallin, Pierrette; Tavernier, Clement; Poiroux, Thierry
A theoretical study of the structure-property relations in ultra-fine metallic materials with fractal microstructures
Sabirov, I.; Yang, C.; Mullins, J.; Hodgson, P. D.
Effect of Accumulative Roll Bonding on Plastic Flow Properties of Commercially Pure Zirconium
Sabirov, I.; Molina-Aldareguia, J. M.; Jiang, L.; Kassner, M. E.; Perez-Prado, M. T.
Continuum modeling of the reverse Hall-Petch effect in nanocrystalline metals under uniaxial tension: how many grains in a finite element model?
Jerusalem, Antoine
Computational study of atomic mobility for the bcc phase of the U-Pu-Zr ternary system
Li, Weibang; Hu, Rui; Cui, Y. -W.; Zhong, Hong; Chang, Hui; Li, Jinshan; Zhou, Lian
A hybrid molecular photoanode for efficient light – induced water oxidation
Grau, Sergi; Berardi, Serena; Moya, Alicia; Matheu, Roc; Cristino, Vito; Jose Vilatela, Juan; Bignozzi, Carlo A.; Caramori, Stefano; Gimbert-Surinach, Carolina; Llobet, Antoni
Branched 1,6-Diaminohexane-Derived Aliphatic Polyamine as Curing Agent for Epoxy: Isothermal Cure, Network Structure, and Mechanical Properties
Wan, Jintao; Li, Cheng; Fang, Hong; Li, Bo-Geng
Modeling adsorption of brominated, chlorinated and mixed bromo/chloro-dibenzo-p-dioxins on C-60 fullerene using Nano-QSPR
Urbaszek, Piotr; Gajewicz, Agnieszka; Sikorska, Celina; Haranczyk, Maciej; Puzyn, Tomasz
Indirect improvement of high temperature mechanical properties of a Mg-based alloy Elektron2l by addition of AIN nanoparticles
Daudin, R.; Terzi, S.; Mallmann, C.; Martin, R. Sanchez; Lhuissier, P.; Boller, E.; Pacureanu, A.; Katsarou, L.; Dieringa, H.; Salvo, L.
Multifunctional Nano-engineered Polymer Surfaces with Enhanced Mechanical Resistance and Superhydrophobicity
Hernandez, Jaime J.; Monclus, Miguel A.; Navarro-Baena, Ivan; Viela, Felipe; Molina-Aldareguia, Jon M.; Rodriguez, Isabel
Fabric compaction and infiltration during vacuum-assisted resin infusion with and without distribution medium
Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier
Influence of free surfaces on microstructure evolution of radiation damage in Fe from molecular dynamics and object kinetic Monte Carlo calculations
Aliaga, Maria J.; Dopico, Ignacio; Martin-Bragado, Ignacio; Caturla, Maria J.
Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding
Amirkhanlou, Sajjad; Rahimian, Mehdi; Ketabchi, Mostafa; Parvin, Nader; Yaghinali, Parisa; Carreno, Fernando
Characterization of catalytic materials with scanning photoelectron microscopy: Present and future
Amati, M.; Aleman, B.; Bozzini, B.; Gregoratti, L.; Sezen, H.; Kiskinova, M.
X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear
Sket, F.; Enfedaque, A.; Diaz Lopez, C.; Gonzalez, C.; Molina-Aldareguia, J.; LLorca, J.
The role of mesophases in the ordering of polymers
Perez, E.; Cerrada, M. L.; Garcia-Penas, A.; Gomez-Elvira, J. M.; Fernandez-Blazquez, J. P.; Martinez-Gomez, A.; Lopez-Velazquez, D.; Martinez, J. C.
On the role of processing parameters in sintered new Co-based (W,Al) alloys
Carton-Cordero, M.; Srinivasarao, B.; Campos, M.; Garcia-Junceda, A.; Torralba, J. M.
Predicting epitaxial orientations and lattice structure in ultrathin magnetic thin films
Lu, Yong; Wang, Cuiping; Shi, Rongpei; Cui, Yuanyuan; Shi, Zhan; Yang, Shuiyuan; Cui, Yuwen; Liu, Xingjun
Landau modeling of dynamical nucleation of martensite at grain boundaries under local stress
Xu, Guanglong; Wang, Chuanyun; Ignacio Beltran, Juan; LLorca, Javier; Cui, Yuwen
A numerical method for the time coarsening of transport processes at the atomistic scale
Gonzalez-Ferreiro, B.; Romero, I.; Ortiz, M.
Atomistic modeling of epitaxial growth of semiconductor materials
Martin-Bragado, Ignacio; Sarikov, Andrey
Development of tool for physical simulation of skin formation during investment casting of nickel-based superalloys
Rahimian, M.; Milenkovic, S.; Maestro, L.; Ruiz De Azua, A. Eguidazu; Sabirov, I.
Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
Munoz, R.; Gonzalez, C.; Llorca, J.
Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law
Czel, Gergely; Jalalvand, Meisam; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier
Effect of Zirconium on the Microstructure and Mechanical Properties of an Al-Alloyed ODS Steel Consolidated by FAHP
Garcia-Junceda, Andrea; Garcia-Rodriguez, Nerea; Campos, Monica; Carton-Cordero, Marta; Torralba, Jose Manuel
Synchronous parallel Kinetic Monte Carlo: Implementation and results for object and lattice approaches
Martin-Bragado, Ignacio; Abujas, J.; Galindo, P. L.; Pizarro, J.
Phase equilibria in Mg-rich corner of Mg-Ca-RE (RE=Gd, Nd) systems at 400 degrees C
Fei, Hou-jun; Xu, Guang-long; Liu, Li-bin; Bo, Hong; Zeng, Li-jun; Chen, Cui-ping
DAMAGE LOCALIZATION AND FAILURE LOCUS UNDER BIAXIAL LOADING IN GLASS-FIBER NONWOVEN FELTS
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Multi-scale homogenization-based modeling of semi-crystalline polymers
Agoras, M.; Ponte Castaneda, P.
Nanostructuring of Ultra-Thin HfO(2) Layers for High-k/III-V Device Application
Benedicto, M.; Anguita, J.; Alvaro, R.; Galiana, B.; Molina-Aldereguia, J. M.; Tejedor, P.
Characterization of creep and creep damage by in-situ microtomography
Borbely, Andras; Dzieciol, Krzysztof; Sket, Federico; Isaac, Augusta; di Michiel, Marco; Buslaps, Thomas; Kaysser-Pyzalla, Anke R.
Strength and toughness of cellular SiC at elevated temperature
Presas, M.; Pastor, J. Y.; LLorca, J.; Martin, A.; Segurado, J.; Gonzalez, C.
Deformation mechanisms in an ultra-fine grained Al alloy
Sabirov, Ilchat; Barnett, Matthew R.; Estrin, Yuri; Timokhina, Ilana; Hodgson, Peter D.
Modelling of the mechanical behavior of polyurethane foams by means of micromechanical characterization and computational homogenization
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
Merging Biology and Solid-State Lighting: Recent Advances in Light-Emitting Diodes Based on Biological Materials
Fresta, Elisa; Fernandez-Luna, Veronica; Coto, Pedro B.; Costa, Ruben D.
A carbon science perspective in 2018: Current achievements and future challenges
Bianco, Alberto; Chen, Yongsheng; Chen, Yuan; Ghoshal, Debjit; Hurt, Robert H.; Kim, Yoong Ahm; Koratkar, Nikhil; Meunier, Vincent; Terrones, Mauricio
The cavitation erosion of ultrasonic sonotrode during large-scale metallic casting: Experiment and simulation
Tian, Yang; Liu, Zhilin; Li, Xiaoqian; Zhang, Lihua; Li, Ruiqing; Jiang, Ripeng; Dong, Fang
An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
Haouala, Sarra; Segurado, Javier; LLorca, Javier
Modelling and simulation methodology for unidirectional composite laminates in a Virtual Test Lab framework
Falco, O.; Avila, R. L.; Tijs, B.; Lopes, C. S.
High throughput analysis of solute effects on the mechanical behavior and slip activity of beta titanium alloys
Wang, C. Y.; Yang, L. W.; Cui, Y. -W.; Perez-Prado, M. T.
Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy
Bugelnig, Katrin; Sket, Federico; Germann, Holger; Steffens, Thomas; Koos, Robert; Wilde, Fabian; Boller, Elodie; Requena, Guillermo
Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature
Yang, L. W.; Mayer, C.; Li, N.; Baldwin, J. K.; Mara, N. A.; Chawla, N.; Molina-Aldareguia, J. M.; Llorca, J.
Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness
Snel, J.; Monclus, M. A.; Castillo-Rodriguez, M.; Mara, N.; Beyerlein, I. J.; Llorca, J.; Molina-Aldareguia, J. M.
From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
Tourret, D.; Mertens, J. C. E.; Lieberman, E.; Imhoff, S. D.; Gibbs, J. W.; Henderson, K.; Fezzaa, K.; Deriy, A. L.; Sun, T.; Lebensohn, R. A.; Patterson, B. M.; Clarke, A. J.
Fabrication of low-fire-hazard flexible poly (vinyl chloride) via reutilization of heavy metal biosorbents
Pan, Ye-Tang; Wang, De-Yi
Effect on thermal and combustion behaviors of montmorillonite intercalation nickel compounds in polypropylene/IFR system
Kong, Qinghong; Zhang, Hongkai; Zheng, Lu; Wang, De-Yi; Zhang, Junhao
Onset of room temperature ferromagnetism by plastic deformation in three paramagnetic pure metals
Cepeda-Jimenez, C. M.; Hernando, A.; Barandiaran, J. M.; Perez-Prado, M. T.
An atomistic investigation of the composition dependence in SiGe alloys during Solid Phase Epitaxial Regrowth
Payet, Anthony; Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Tavernier, Clement; Gergaud, Patrice; Martin-Bragado, Ignacio
Ultra-fine grained pure Titanium for biomedical applications
Mora-Sanchez, H.; Sabirov, I.; Monclus, M. A.; Matykina, E.; Molina-Aldareguia, J. M.
Tailoring master alloys for liquid phase sintering: Effect of introducing oxidation-sensitive elements
Calderon, Raquel De Oro; Bernardo, Elena; Campos, Monica; Gierl-Mayer, Christian; Danninger, Herbert; Torralba, Jose M.
Multiscale tomographic analysis of heterogeneous cast Al-Si-X alloys
Asghar, Z.; Requena, G.; Sket, F.
Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys
Gunderov, D. V.; Maksutova, G.; Churakova, A.; Lukyanov, A.; Kreitcberg, A.; Raab, G. I.; Sabirov, I.; Prokoshkin, S.
Formation of size-controlled and luminescent Si nanocrystals from SiOxNy/Si3N4 hetero-superlattices
Zelenina, A.; Sarikov, A.; Gutsch, S.; Zakharov, N.; Werner, P.; Reichert, A.; Weiss, C.; Zacharias, M.
Investigation of thermophysical, electronic and lattice dynamic properties for CaX2Si2 (X = Ni, Zn, Cu, Ag, Au) via first-principles calculations
Tao, Xiaoma; Guo, Zifeng; Xu, Guanglong; Wang, Rongcheng; Chen, Hongmei; Ouyang, Yifang
Interdiffusion in FCC Co-Al-Ti Ternary Alloys
Chen, Yi; Li, Jinshan; Tang, Bin; Xu, Guanglong; Kou, Hongchao; Cui, Yuwen
In situ tomographic investigation of damage development in +/- 45 degrees carbon fibre reinforced laminates
Sket, F.; Rodriguez-Hortala, M.; Molina-Aldareguia, J. M.; Llorca, J.; Maire, E.; Requena, G.
Neurite, a Finite Difference Large Scale Parallel Program for the Simulation of Electrical Signal Propagation in Neurites under Mechanical Loading
Garcia-Grajales, Julian A.; Rucabado, Gabriel; Garcia-Dopico, Antonio; Pena, Jose-Maria; Jerusalem, Antoine
RETRACTED: Atomistic simulation of damage accumulation and amorphization in Ge(Retracted article.See vol.121,ARTN 049901,2017)
Gomez-Selles, Jose L.; Claverie, Alain; Sklenard, Benoit; Benistant, Francis; Martin-Bragado, Ignacio
Mono- and dinuclear europium(III) complexes with thenoyltrifluoroacetone and 1,10-phenanthroline-5,6-dione
Zhang, Xiao-Fang; Xu, Cun-Jin; Wan, Jintao
Microstructure evolution and mechanical behavior of as-cast, heat treated and directionally solidified Fe-15Al-10Nb alloys
Yang, Guang; Milenkovic, Srdjan
Capability of mechanical alloying and SPS technique to develop nanostructured high Cr, Al alloyed ODS steels
Garcia-Rodriguez, N.; Campos, M.; Torralba, J. M.; Berger, M. H.; Bienvenu, Y.
Optimisation of eco-friendly binary binder system for powder injection moulding
Abajo, C.; Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M.
Very strong pure titanium by field assisted hot pressing of dual phase powders
Srinivasarao, B.; Torralba, J. M.; Taleghani, M. A. Jabbari; Perez-Prado, M. T.
Toward high performance in Powder Metallurgy
Torralba, Jose M.; Campos, Monica
A Novel High-throughput Technique for Establishing the Solidification-Microstructure Relationships
Milenkovic, Srdjan; Rahimian, Mehdi; Sabirov, Ilchat
Degradation of alumina refractory bricks by sintering Mn low-alloy steels
Campos, Monica; Antonio Sicre-Artalejo, Jose; Manuel Torralba, Jose; Zbiral, Hannes; Danninger, Herbert; Pena, P.
Simultaneously improving the fire safety and mechanical properties of epoxy resin with Fe-CNTs via large-scale preparation
Zhang, Junhao; Kong, Qinghong; Wang, De-Yi
Xenon Gas Separation and Storage Using Metal-Organic Frameworks
Banerjee, Debasis; Simon, Cory M.; Elsaidi, Sameh K.; Haranczyk, Maciej; Thallapally, Praveen K.
Contextualizing yellow light-emitting electrochemical cells based on a blue-emitting imidazo-pyridine emitterd
Fresta, Elisa; Volpi, Giorgio; Garino, Claudio; Barolo, Claudia; Costa, Ruben D.
Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior
Cruzado, A.; Lucarini, S.; LLorca, J.; Segurado, J.
Ferrocene-Based Nonphosphorus Copolymer: Synthesis, High-Charring Mechanism, and Its Application in Fire Retardant Epoxy Resin
Liao, Dui-Jun; Xu, Qi-Kui; McCabe, Richard W.; Babu, Heeralal Vignesh; Hu, Xiao-Ping; Pan, Ning; Wang, De-Yi; Hull, T. Richard
Out-of-Oblivion Cage Molecules and Their Porous Crystalline Phases
Garcia, Ismael Gomez; Bernabei, Marco; Soto, Raul Perez; Haranczyk, Maciej
Functionalized allylamine polyphosphate as a novel multifunctional highly efficient fire retardant for polypropylene
Xiao, Dan; Li, Zhi; Gohs, Uwe; Wagenknecht, Udo; Voita, Brigitte; Wang, De-Yi
Low thermal and high electrical conductivity in hollow glass microspheres covered with carbon nanofiber-polymer composites
Herrera-Ramirez, Luis C.; Cano, Manuela; Guzman de Villoria, Roberto
Micro-mechanical properties and interfacial engineering of SiC fiber reinforced sol-gel fabricated mullite matrix composites
Han, S.; Yang, L. W.; Liu, H. T.; Sun, X.; Jiang, R.; Mao, W. G.; Chen, Z. H.
Thermodynamic modeling of nitrate materials for hybrid thermal energy storage: Using latent and sensible mechanisms
Ignacio Beltran, Juan; Wang, Jingya; Montero-Chacon, Francisco; Cui, Yuwen
Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg
Jin, Bo Cheng; Li, Xiaochen; Jain, Atul; Gonzalez, Carlos; LLorca, Javier; Nutt, Steven
Diffusion Research in BCC Ti-Al-Ni Ternary Alloys
Gao, Bo; Gu, Yuanyu; Wu, Qiaojun; Guo, Yanhua; Cui, Yuwen
Effect of Fe3O4-doped sepiolite on the flammability and thermal degradation properties of epoxy composites
Liu, Yun; Kong, Qing-Hong; Zhao, Xiao-Min; Zhu, Ping; Zhao, Jianqing; Esteban-Cubillo, Antonio; Santaren, Julio; Wang, De-Yi
Carbon nanotube fibers with martensite and austenite Fe residual catalyst: room temperature ferromagnetism and implications for CVD growth
Aleman, B.; Ranchal, R.; Reguero, V.; Mas, B.; Vilatela, J. J.
Cell survival and differentiation with nanocrystalline glass-like carbon using substantia nigra dopaminergic cells derived from transgenic mouse embryos
Rodriguez-Losada, Noela; Romero, Pablo; Estivill-Torrus, Guillermo; Guzman de Villoria, Roberto; Aguirre, Jose A.
Tuning the magnetic properties of pure hafnium by high pressure torsion
Cepeda-Jimenez, C. M.; Beltran, J. I.; Hernando, A.; Garcia, M. A.; Yndurain, F.; Zhilyaev, A.; Perez-Prado, M. T.
TCNQ Grown on Cu (001): Its Atomic and Electronic Structure Determination
Capitan, M. J.; Navio, C.; Beltran, J. I.; Otero, R.; Alvarez, J.
Micro-macro mechanical relations in Palmetto wood by numerical homogenisation
Saavedra Flores, Erick I.; Haldar, Sandip
The formation mechanism of eutectic microstructures in NiAl-Cr composites
Tang, Bin; Cogswell, Daniel A.; Xu, Guanglong; Milenkovic, Srdjan; Cui, Yuwen
Strength and toughness of structural fibres for composite material reinforcement
Herraez, M.; Fernandez, A.; Lopes, C. S.; Gonzalez, C.
Simultaneously enhancing the flame retardancy and toughness of epoxy by lamellar dodecyl-ammonium dihydrogen phosphate
Zhuang, Rong-Chuan; Yang, Juan; Wang, De-Yi; Huang, Ya-Xi
Thermostructural behaviour of Ni-Cr materials: modelling of bulk and nanoparticle systems
Ortiz-Roldan, Jose M.; Rabdel Ruiz-Salvador, A.; Calero, Sofia; Montero-Chacon, Francisco; Garcia-Perez, Elena; Segurado, Javier; Martin-Bragado, Ignacio; Hamad, Said
Physical Simulation of Hot Rolling of Ultra-fine Grained Pure Titanium
Polyakov, Alexander; Gunderov, Dmitry; Sitdikov, Vil'; Valiev, Ruslan; Semenova, Irina; Sabirov, Ilchat
Tip Shape Effect on Hot Nanoindentation Hardness and Modulus Measurements
Alberto Monclus, Miguel; Lotfian, Saeid; Mikel Molina-Aldareguia, Jon
Microtomographic assessment of damage in P91 and E911 steels after long-term creep
Renversade, Loic; Ruoff, Herbert; Maile, Karl; Sket, Federico; Borbely, Andras
Process modeling of stress and chemical effects in SiGe alloys using kinetic Monte Carlo
Zographos, Nikolas; Martin-Bragado, Ignacio
Shrinkage kinetics during early stage sintering of cold isostatically compacted iron powder
Molinari, A.; Bisoffi, E.; Menapace, C.; Torralba, J.
Microstructure features and mechanical properties of a UFG Al-Mg-Si alloy produced via SPD
Bobruk, E.; Sabirov, I.; Kazykhanov, V.; Valiev, R.; Murashkin, M.
Computational modeling of high performance steel fiber reinforced concrete using a micromorphic approach
Huespe, A. E.; Oliver, J.; Mora, D. F.
Lattice Kinetic Modeling of the Anisotropic Growth of Two-Dimensional Islands on Barite (001) Surface
de Antonio Gomez, Santiago; Pina, Carlos M.; Martin-Bragado, Ignacio
Thermal stability of {110} facet terminated gold nanobelts
Chen, Ying; Milenkovic, Srdjan; Hassel, Achim Walter
Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation
Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier
Effect of water conditioning on the fracture behavior of PA12 composites processed by selective laser sintering
Seltzer, Rocio; Martin de la Escalera, Federico; Segurado, Javier
Multi-technique characterisation of MOVPE-grown GaAs on Si
Wong, C. S.; Bennett, N. S.; McNally, P. J.; Galiana, B.; Tejedor, P.; Benedicto, M.; Molina-Aldareguia, J. M.; Monaghan, S.; Hurley, P. K.; Cherkaoui, K.
Metal Matrix Composites reinforced with nano-size reinforcements
Molina-Aldareguia, Jon M.; Reyes Elizalde, M.
HIGH STRENGTH ULTRA-FINE GRAINED TITANIUM PRODUCED VIA A NOVEL SPD PROCESSING ROUTE
Molina-Aldareguia, J. M.; Perez-Prado, M. T.; Valiev, R. Z.; Semenova, I. P.; Sabirov, I.
Hollow waveguide-based full-field absorbance biosensor
Cadarso, V. J.; Llobera, A.; Fernandez-Sanchez, C.; Darder, M.; Dominguez, C.
Tunable Fano Resonance and Plasmon-Exciton Coupling in Single Au Nanotriangles on Monolayer WS2 at Room Temperature
Wang, Mingsong; Krasnok, Alex; Zhang, Tianyi; Scarabelli, Leonardo; Liu, He; Wu, Zilong; Liz-Marzan, Luis M.; Terrones, Mauricio; Alu, Andrea; Zheng, Yuebing
