Publication

    2020

  • Santos, Cleis; Garcia-Quismondo, Enrique; Palma, Jesus; Anderson, Marc A.; Lado, Julio J. - Understanding capacitive deionization performance by comparing its electrical response with an electrochemical supercapacitor: Strategies to boost round-trip efficiency. electrochimica acta 330, 135216-135216, 2020. DOI: 10.1016/j.electacta.2019.135216
  • Deng, Xiangxing; Cinca, Nuria; Garbiec, Dariusz; Manuel Torralba, Jose; Garcia-Junceda, Andrea - Wear resistance of nanostructured Cr-based WC hardmetals sintered by spark plasma sintering. international journal of refractory metals and hard materials 86, 105092-105092, 2020. DOI: 10.1016/j.ijrmhm.2019.105092
  • 2019

  • Lado, J.; Santos, C.; García Quismondo, E.; Anderson, M.A.; Gutiérrez, B.; Huertas, F.; Ordóñez, A.; de Miguel, A. - Singular Applications of Capacitive Deionization: Reduction of the Brine Volume from Brackish Water Reverse Osmosis Plants. advances in science , 429-431, 2019. DOI: 10.1007/978-3-030-13068-8_107
  • S. de Juan, J. Zhang, P. Acuña, S. Nie, Z. Liu, W. Zhang, M.L. Puertas, A. Esteban-Cubillo, J. Santarén, D-Y. Wang - An efficient approach to improving fire retardancy and smoke suppression for intumescent flame‐retardant polypropylene composites via incorporating organo‐modified sepiolite. fire and materials 43-970, 2019. DOI: 10.1002/fam.2757
  • Z. Zhang, X. Li, Y. Yuan, Y-T. Pan, D-Y. Wang, R. Yang - Confined Dispersion of Zinc Hydroxystannate Nanoparticles into Layered Bimetallic Hydroxide Nanocapsules and Its Application in Flame-Retardant Epoxy Nanocomposites. acs applied materials & interfaces 11-43, 40951-40960, 2019. DOI: 10.1021/acsami.9b15393
  • Z. Li, J. Zhang, S. Nie, X. Wen, S. Djaziri, D-Y. Wang - Bioinspired growth of iron derivatives on mesoporous silica: effect on thermal degradation and fire behavior of polystyrene. nanotechnology 31, 6, 2019. DOI: 10.1088/1361-6528/ab4e46
  • Zhang, J.; Li, Z., Z; Zhang, L.; Yang, Y.; Wang, D-Y - Green Synthesis of Biomass Phytic Acid-Functionalized UiO-66-NH2 Hierarchical Hybrids toward Fire Safety of Epoxy Resin. acs sustainable chemistry & engineering 8,2, 994-1003, 2019. DOI: 10.1021/acssuschemeng.9b05658
  • Fresta, Elisa; Milanesio, Marco; Volpi, Giorgio; Barolo, Claudia; Conterosito, Eleonora - Synthesis and Crystal Structure of Bis(2-phenylpyridine-C,N’)-bis(acetonitrile)iridium(III)hexafluorophosphate Showing Three Anion/Cation Couples in the Asymmetric Unit. crystals 9(12)-617, 2019. DOI: 10.3390/cryst9120617
  • Pashaei, Babak; Karimi, Soheila; Shahroosvand, Hashem; Abbasi, Parisa; Pilkington, Melanie; et al. - Polypyridyl ligands as a versatile platform for solid-state light-emitting devices. chemical society reviews 19, 2019. DOI: 10.1039/C8CS00075A
  • Wang, Na; Gao, Huiying; Zhang, Jing; Li, Long; Fan, Xiaolei; et al. - Anticorrosive waterborne epoxy (EP) coatings based on sodium tripolyphosphate-pillared layered double hydroxides (STPP-LDHs). progress in organic coatings 135, 74-81, 2019. DOI: 10.1016/j.porgcoat.2019.04.055
  • Chung, Yongchul G.; Haldoupis, Emmanuel; Bucior, Benjamin J.; Haranczyk, Maciej; Lee, Seulchan; et al. - Advances, Updates, and Analytics for the Computation-Ready, Experimental Metal-Organic Framework Database: CoRE MOF 2019. journal of chemical and engineering data 64-12, 5985-5998, 2019. DOI: 10.1021/acs.jced.9b00835
  • Rana, Moumita; Avvaru, Venkata Sai; Boaretto, Nicola; de la Pena O'Shea, Victor A.; Marcilla, Rebeca; et al. - High rate hybrid MnO2@CNT fabric anodes for Li-ion batteries: properties and a lithium storage mechanism study by in situ synchrotron X-ray scattering. journal of materials chemistry a 46, 2019. DOI: 10.1039/C9TA08800H
  • Rahman, N. Ur; Capuano, L.; Cabeza, S.; Feinaeugle, M.; Garcia-Junceda, A.; et al. - Directed energy deposition and characterization of high-carbon high speed steels. additive manufacturing 30, 100838-100838, 2019. DOI: 10.1016/j.addma.2019.100838
  • Iragi, M.; Pascual-Gonzalez, C.; Esnaola, A.; Lopes, C. S.; Aretxabaleta, L. - Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure. additive manufacturing 30, 100884-100884, 2019. DOI: 10.1016/j.addma.2019.100884
  • Menga, Edoardo; Sanchez, Maria J.; Romero, Ignacio - Anisotropic meta-models for computationally expensive simulations in nonlinear mechanics. international journal for numerical methods in engineering , 2019. DOI: 10.1002/nme.6250
  • Kalali, Ehsan N.; Zhang, Lu; Shabestari, Marjan E.; Croyal, Jeremy; Wang, De-Yi - Flame-retardant wood polymer composites (WPCs) as potential fire safe bio-based materials for building products: Preparation, flammability and mechanical properties. fire safety journal 107, 210-216, 2019. DOI: 10.1016/j.firesaf.2017.11.001
  • Li, XL; Zhang, FH; Jian, RK; Ai, YF; Ma, JL; Hui, GJ; Wang, DY - Influence of eco-friendly calcium gluconate on the intumescent flame-retardant epoxy resin: Flame retardancy, smoke suppression and mechanical properties. composites part b-engineering 176, 2019. DOI: 10.1016/j.compositesb.2019.107200
  • Martin, Arturo; Maria Cepeda-Jimenez, Carmen; Teresa Perez-Prado, Maria - Gas atomization of gamma-TiAl Alloy Powder for Additive Manufacturing. acta materialia , 2019. DOI: 10.1002/adem.201900594
  • Moreno-Valle, EC; Pachla, W; Kulczyk, M; Sabirov, I; Hohenwarter, A - Anisotropy of Tensile and Fracture Behavior of Pure Titanium after Hydrostatic Extrusion. materials transactions 60, 2160-2167, 2019. DOI: 10.2320/matertrans.MF201928
  • Kong, QH; Sun, YL; Zhang, CJ; Guan, HM; Zhang, JH; Wang, DY; Zhang, F - Ultrathin iron phenyl phosphonate nanosheets with appropriate thermal stability for improving fire safety in epoxy. composites science and technology 182, 2019. DOI: 10.1016/j.compscitech.2019.107748
  • Li, Z; Liu, ZQ; Zhang, J; Fu, C; Wagenknecht, U; Wang, DY - Bio-based layered double hydroxide nanocarrier toward fire-retardant epoxy resin with efficiently improved smoke suppression. chemical engineering journal 378, 2019. DOI: 10.1016/j.cej.2019.122046
  • Riezzo, MA; Simmons, M; Russell, B; Sket, F; Martinez, V; Gonzalez, C - Dynamic characterisation of interlaminar fracture toughness in carbon fibre epoxy composite laminates. composites part a-applied science and manufacturing 126, 2019. DOI: 10.1016/j.compositesa.2019.105597
  • Bernabei, M; Soto, RP; Garcia, IG; Haranczyk, M - Computational discovery of a large-imine-cage-based porous molecular material and its application in water desalination. molecular systems design & engineering 4-4, 912-920, 2019. DOI: 10.1039/c9me00018f
  • Esteban-Manzanares, G; Bellon, B; Martinez, E; Papadimitriou, I; LLorca, J - Strengthening of Al-Cu alloys by Guinier-Preston zones: Predictions from atomistic simulations. journal of the mechanics and physics of solids 132, 2019. DOI: 10.1016/j.jmps.2019.07.018
  • Valdes-Tabernero, MA; Petrov, RH; Monclus, MA; Molina-Aldareguia, JM; Sabirov, I - The effect of soaking time after ultrafast heating on the microstructure and mechanical behavior of a low carbon steel. materials science and engineering a-structural materials properties microstructure and processing 765, 2019. DOI: 10.1016/j.msea.2019.138276
  • Yu, FY; Wei, YH; Liu, XB - The evolution of polycrystalline solidification in the entire weld: A phase-field investigation. international journal of heat and mass transfer 142, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.118450
  • Mugica, JI; Lopes, CS; Naya, F; Herraez, M; Martinez, V; Gonzalez, C - Multiscale modelling of thermoplastic woven fabric composites: From micromechanics to mesomechanics. composite structures 228, 2019. DOI: 10.1016/j.compstruct.2019.111340
  • Haldar, S; Herraez, M; Naya, F; Gonzalez, C; Lopes, CS - Relations between intralaminar micromechanisms and translaminar fracture behavior of unidirectional FRP supported by experimental micromechanics. composites part b-engineering 174, 2019. DOI: 10.1016/j.compositesb.2019.107000
  • Fresta, E; Weber, MD; Fernandez-Cestau, J; Costa, RD - White Light-Emitting Electrochemical Cells Based on Deep-Red Cu(I) Complexes. advanced optical materials , 2019. DOI: 10.1002/adom.201900830
  • Banis, A; Duran, EH; Bliznuk, V; Sabirov, I; Petrov, RH; Papaefthymiou, S - The Effect of Ultra-Fast Heating on the Microstructure, Grain Size and Texture Evolution of a Commercial Low-C, Medium-Mn DP Steel. metals 9, 877, 2019. DOI: 10.3390/met9080877
  • Zhang, J; Li, Z; Zhang, L; Molleja, JG; Wang, DY - Bimetallic metal-organic frameworks and graphene oxide nano-hybrids for enhanced fire retardant epoxy composites: A novel carbonization mechanism. carbon 153, 407-413, 2019. DOI: 10.1016/j.carbon.2019.07.003
  • Yu, FY; Wei, YH - Phase-field investigation of dendrite growth in the molten pool with the deflection of solid/liquid interface. computational materials science 169, 2019. DOI: 10.1016/j.commatsci.2019.109128
  • Boaretto, N; Almenara, J; Mikhalchan, A; Marcilla, R; Vilatela, JJ - A Route to High-Toughness Battery Electrodes. acs applied energy materials 2, 5889-5899, 2019. DOI: 10.1021/acsaem.9b00906
  • Valdes-Tabernero, MA; Celada-Casero, C; Sabirov, I; Kumar, A; Petrov, RH - The effect of heating rate and soaking time on microstructure of an advanced high strength steel. materials characterization 155, 2019. DOI: 10.1016/j.matchar.2019.109822
  • Ye, TP; Liao, SF; Zhang, Y; Chen, MJ; Xiao, Y; Liu, XY; Liu, ZG; Wang, DY - Cu(0) and Cu(II) decorated graphene hybrid on improving fireproof efficiency of intumescent flame-retardant epoxy resins. composites part b-engineering 175, 2019. DOI: 10.1016/j.compositesb.2019.107189
  • Vilatela, JJ; Poulin, P; Terrones, M - Special issue on Multifunctional Nanocarbon Fibres. carbon 152, 738-739, 2019. DOI: 10.1016/j.carbon.2019.06.017
  • Wang, JY; Zheng, WS; Xu, GL; Llorca, J; Cui, YW - High-throughput extraction of the anisotropic interdiffusion coefficients in hcp Mg-Al alloys. journal of alloys and compounds 805, 237-246, 2019. DOI: 10.1016/j.jallcom.2019.07.084
  • Hong, CN; Kye, DK; Mane, AU; Elam, JW; Etacheri, V; Pol, VG - Blocking Polysulfides in Graphene-Sulfur Cathodes of Lithium-Sulfur Batteries through Atomic Layer Deposition of Alumina. energy technology , 2019. DOI: 10.1002/ente.201900621
  • Fernandez-Luna, V; Sanchez-de Alcazar, D; Fernandez-Blazquez, JP; Cortajarena, AL; Coto, PB; Costa, RD - Deciphering Limitations to Meet Highly Stable Bio-Hybrid Light-Emitting Diodes. advanced functional materials , 2019. DOI: 10.1002/adfm.201904356
  • Baluch, AH; Falco, O; Jimenez, JL; Tijs, BHAH; Lopes, CS - An efficient numerical approach to the prediction of laminate tolerance to Barely Visible Impact Damage. composite structures 225, 2019. DOI: 10.1016/j.compstruct.2019.111017
  • Ou, YF; Gonzalez, C; Vilatela, JJ - Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils. composites part a-applied science and manufacturing 124, 2019. DOI: 10.1016/j.compositesa.2019.105477
  • Fresta, E; Carbonell-Vilar, JM; Yu, JY; Armentano, D; Cano, J; Viciano-Chumillas, M; Costa, RD - Deciphering the Electroluminescence Behavior of Silver(I)-Complexes in Light-Emitting Electrochemical Cells: Limitations and Solutions toward Highly Stable Devices. advanced functional materials 29, 2019. DOI: 10.1002/adfm.201901797
  • Barnoush, A; Hosemann, P; Molina-Aldareguia, J; Wheeler, JM - In situ small-scale mechanical testing under extreme environments. mrs bulletin 44, 471-477, 2019. DOI: 10.1557/mrs.2019.126
  • Armas, JA; Reynolds, KJ; Marsh, ZM; Fernandez-Blazquez, JP; Ayala, D; Cronin, AD; Del Aguila, J; Fideldy, R; Abdou, JP; Bilger, DW; Stefik, M; Scott, GE; Zhang, SJ - Supramolecular Assembly of Oriented Spherulitic Crystals of Conjugated Polymers Surrounding Carbon Nanotube Fibers. macromolecular rapid communications , 2019. DOI: 10.1002/marc.201900098
  • Shao, ZB; Yue, WZ; Piao, MJ; Ma, JY; Lv, X; Wang, DY; Wang, Q - An Excellent Intrinsic Transparent Epoxy Resin with High Flame Retardancy: Synthesis, Characterization, and Properties. macromolecular materials and engineering , 2019. DOI: 10.1002/mame.201900254
  • Perez, JLS; Haranczyk, M; Zimmermann, NER - High-throughput assessment of hypothetical zeolite materials for their synthesizeability and industrial deployability. zeitschrift fur kristallographie-crystalline materials 234, 437-450, 2019. DOI: 10.1515/zkri-2018-2155
  • Esteban-Manzanares, G; Ma, AX; Papadimitriou, I; Martinez, E; LLorca, J - Basal dislocation/precipitate interactions in Mg-Al alloys: an atomistic investigation. modelling and simulation in materials science and engineering 27, 2019. DOI: 10.1088/1361-651X/ab2de0
  • Liu, ZL; Papadimitriou, I; Castillo-Rodriguez, M; Wang, CY; Esteban-Manzanares, G; Yuan, XM; Tan, HH; Molina-Aldareguia, JM; Llorca, J - Mechanical Behavior of InP Twinning Superlattice Nanowires. nano letters 19, 4490-4497, 2019. DOI: 10.1021/acs.nanolett.9b01300
  • S. Lucarini, J. Segurado - An algorithm for stress and mixed control in Galerkin-based FFT homogenization. international journal for numerical methods in engineering 119-805, 2019. DOI: 10.1002/nme.6069
  • del Pozo, D; Lopez-Gomez, I; Romero, I - A robust asymmetrical contact algorithm for explicit solid dynamics. computational mechanics 64, 15-32, 2019. DOI: 10.1007/s00466-018-1654-x
  • Pushkareva, M; Sket, F; Segurado, J; Llorca, J; Yandouzi, M; Weck, A - Effect of grain orientation and local strains on void growth and coalescence in titanium. materials science and engineering a-structural materials properties microstructure and processing 760, 258-266, 2019. DOI: 10.1016/j.msea.2019.06.004
  • Szymoniak, P; Li, Z; Wang, DY; Schonhals, A - Dielectric and flash DSC investigations on an epoxy based nanocomposite system with MgAl layered double hydroxide as nanofiller. thermochimica acta 677, 151-161, 2019. DOI: 10.1016/j.tca.2019.01.010
  • Carbonell-Vilar, JM; Fresta, E; Armentano, D; Costa, RD; Viciano-Chumillas, M; Cano, J - Photoluminescent Cu(i) vs. Ag(i) complexes: slowing down emission in Cu(i) complexes by pentacoordinate low-lying excited states. dalton transactions 48, 9765-9775, 2019. DOI: 10.1039/c9dt00772e
  • Rodiles, X; Reguero, V; Vila, M; Aleman, B; Arevalo, L; Fresno, F; O'Shea, VAD; Vilatela, JJ - Carbon nanotube synthesis and spinning as macroscopic fibers assisted by the ceramic reactor tube. scientific reports 9, 2019. DOI: 10.1038/s41598-019-45638-6
  • Li, XC; Miyauchi, M; Gonzalez, C; Nutt, S - Thermal oxidation of PEPA-terminated polyimide. high performance polymers 31, 707-718, 2019. DOI: 10.1177/0954008318787852
  • Mikhalchan, A; Vilatela, JJ - A perspective on high-performance CNT fibres for structural composites. carbon 150, 191-215, 2019. DOI: 10.1016/j.carbon.2019.04.113
  • Aleman, B.; Vilatela, J.J. - Molecular characterization of macroscopic aerogels of single-walled carbon nanotubes. carbon 149, 512-518, 2019. DOI: 10.1016/j.carbon.2019.04.061
  • Pena-Bahamonde, J; San-Miguel, V; Baselga, J; Fernandez-Blazquez, JP; Gedler, G; Ozisik, R; Cabanelas, JC - Effect of polysulfone brush functionalization on thermo-mechanical properties of melt extruded graphene/polysulfone nanocomposites. carbon 151, 84-93, 2019. DOI: 10.1016/j.carbon.2019.05.072
  • W.Liu, J.Sanz, C.Pecharromán ,I.Sobrados, S.Lopez-Esteban, R.Torrecillas, De-Yi Wang, J.S.Moya, B.Caba - Synthesis, characterization and applications of low temperature melting glasses belonging to P2O5-CaO-Na2O system. ceramics international 45, 12234-12242, 2019. DOI: 10.1016/j.ceramint.2019.03.133
  • Cernicharo, J; Gallego, JD; Lopez-Perez, JA; Tercero, F; Tanarro, I; Beltran, F; de Vicente, P; Lauwaet, K; Aleman, B; Moreno, E; Herrero, VJ; Domenech, JL; Ramirez, SI; Bermudez, C; Pelaez, RJ; Patino-Esteban, M; Lopez-Fernandez, I; Garcia-Alvaro, S; Garcia-Carreno, P; Cabezas, C; Malo, I; Amils, R; Sobrado, J; Diez-Gonzalez, C; Hernandez, JM; Tercero, B; Santoro, G; Martinez, L; Castellanos, M; Jimenez, BV; Pardo, JR; Barbas, L; Lopez-Fernandez, JA; Aja, B; Leuther, A; Martin-Gago, JA - Broad-band high-resolution rotational spectroscopy for laboratory astrophysics. astronomy & astrophysics 626, 2019. DOI: 10.1051/0004-6361/201935197
  • G. Kahraman, D. Wang, J. von Irmer,M. Gallei, E. Hey-Hawkins, T. Eren - Synthesis and Characterization of Phosphorusand Carborane-Containing Polyoxanorbornene Block Copolymers. polymers 11, 613, 2019. DOI: 10.3390/polym11040613
  • Torralba, JM; Alvaredo, P; Garcia-Junceda, A - High-entropy alloys fabricated via powder metallurgy. A critical review. powder metallurgy 62, 84-114, 2019. DOI: 10.1080/00325899.2019.1584454
  • Lu Zhang, Siqi Chen, Ye-Tang Pan, Shuidong Zhang, Shibin Nie, Ping Wei, Xiuqin Zhang, Rui Wang, De-Yi Wang - Nickel Metal–Organic Framework Derived Hierarchically Mesoporous Nickel Phosphate toward Smoke Suppression and Mechanical Enhancement of Intumescent Flame Retardant Wood Fiber/Poly(lactic acid) Composites. acs sustainable chemistry & engineering 7, 9272-9280, 2019. DOI: 10.1021/acssuschemeng.9b00174
  • Qi, XL; Zhou, DD; Zhang, J; Hu, S; Haranczyk, M; Wang, DY - Simultaneous Improvement of Mechanical and Fire-Safety Properties of Polymer Composites with Phosphonate-Loaded MOF Additives. acs applied materials & interfaces 11, 20325-20332, 2019. DOI: 10.1021/acsami.9b02357
  • Li, JF; Romero, I; Segurado, J - Development of a thermo-mechanically coupled crystal plasticity modeling framework: Application to polycrystalline homogenization. international journal of plasticity 119, 313-330, 2019. DOI: 10.1016/j.ijplas.2019.04.008
  • J. M. Torralba, P. Alvaredo, A. García-Junceda - High-entropy alloys fabricated via powder metallurgy: A critical review. international journal of powder metallurgy 62, 84-114, 2019. DOI: 10.1080/00325899.2019.1584454
  • Rubio, S; Maça, RR; Aragón, MJ; Cabello, M; Castillo-Rodríguez, M; Lavela, P; Tirado, JL; Etacheri, V; Ortiz, GF - Superior electrochemical performance of TiO2 sodium-ion battery anodes in diglyme-based electrolyte solution. journal of power sources 432, 82-91, 2019. DOI: 10.1016/j.jpowsour.2019.05.070
  • T.Sapanathan; N.Jimenez-Mena: I.Sabirov; M.A.Monclús; J.M.Molina-Aldareguía; P.XiabcL.Zhao; A.Simar - A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by friction melt bonding. journal of materials science & technology 35, 2048-2057, 2019. DOI: 10.1016/j.jmst.2019.05.004
  • Kahraman, G; Wang, DY; Von Irmer, J; Gallei, M; Hey-Hawkins, E; Eren, T - Synthesis and Characterization of Phosphorus- and Carborane-Containing Polyoxanorbornene Block Copolymers. polymers 11, 613-613, 2019. DOI: 10.3390/polym11040613
  • Monrrabal, G.; Bautista, A.; Guzman, S.; Gutierrez, C.; Velasco, F. - Influence of the cold working induced martensite on the electrochemical behavior of AISI 304 stainless steel surfaces. journal of materials research and technology 8, 1335-1346, 2019. DOI: 10.1016/j.jmrt.2018.10.004
  • Yue, H.; Rubalcaba, J. C.; Cui, J.; Fernández-Blázquez, J. P.; Yang, C.; Shuttleworth, P.S. - Determination of cross-sectional area of natural plant fibres and fibre failure analysis by in situ SEM observation during microtensile tests. cellulose 26 - 8, 4693-4706, 2019. DOI: 10.1007/s10570-019-02428-7
  • Beyerlein, I.; Xu, S.; Llorca, J.; El-Awady, J.; Mianroodi, J.; Svendsen, B. - Alloy design for mechanical properties: Conquering the length scales. computational design and development of alloys 44-4, 257-265, 2019. DOI: 10.1557/mrs.2019.67
  • Admal, NC; Segurado, J; Marian, J - A three-dimensional misorientation axis- and inclination-dependent Kobayashi-Warren-Carter grain boundary model. journal of materials science & technology 128, 32-53, 2019. DOI: 10.1016/j.jmps.2019.03.020
  • Shi Z; Liu S; Guo J; Zhao C; Zhou Y; Xing X; Yang, Q - Investigation on heterogeneous nucleation substrate of Y2O3 as NbC in hypereutectic Fe–Cr–C hardfacing coating by experiment and first-principles calculation. journal of materials science 54, 10102-10118, 2019. DOI: 10.1007/s10853-019-03548-y
  • Zhang, L; Chen, SQ; Pan, YT; Zhang, SD; Nie, SB; Wei, P; Zhang, XQ; Wang, R; Wang, DY - Nickel Metal-Organic Framework Derived Hierarchically Mesoporous Nickel Phosphate toward Smoke Suppression and Mechanical Enhancement of Intumescent Flame Retardant Wood Fiber/Poly(lactic acid) Composites. acs sustainable chemistry & engineering 7, 9272-9280, 2019. DOI: 10.1021/acssuschemeng.9b00174
  • Bieler, TR; Alizadeh, R; Pena-Ortega, M; Llorca, J - An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al. international journal of plasticity 118, 269-290, 2019. DOI: 10.1016/j.ijplas.2019.02.014
  • Jian, RK; Ai, YF; Xia, L; Zhang, ZP; Wang, DY - Organophosphorus heteroaromatic compound towards mechanically reinforced and low-flammability epoxy resin. composites part b-engineering 168, 458-466, 2019. DOI: 10.1016/j.compositesb.2019.03.052
  • Wang, J; Tang, Q; Ren, XM; Yang, YK; Zhang, QC; Lei, WW; Li, Z; Jiang, T; Shi, D - Selectively localized nanosilica particles at the phase interface of PS/PA6/nanosilica composites with co-continuous structure via reactive extrusion. composites science and technology 172, 125-133, 2019. DOI: 10.1016/j.compscitech.2019.01.016
  • Yang, YX; Haurie, L; Wen, JH; Zhang, SD; Ollivier, A; Wang, DY - Effect of oxidized wood flour as functional filler on the mechanical, thermal and flame-retardant properties of polylactide biocomposites. industrial crops and products 130-309, 2019. DOI: 10.1016/j.indcrop.2018.12.090
  • Vivas, J; Capdevila, C; Altstadt, E; Houska, M; Sabirov, I; San-Martin, D - Microstructural Degradation and Creep Fracture Behavior of Conventionally and Thermomechanically Treated 9% Chromium Heat Resistant Steel. metals and materials international 25, 343-352, 2019. DOI: 10.1007/s12540-018-0192-6
  • Ma, XK; Yin, XW; Fan, XM; Cao, XY; Yang, LW; Sun, XN; Cheng, LF - Improved tensile strength and toughness of dense C/SiC-SiBC with tailored PyC interphase. journal of the european ceramic society 39, 1766-1774, 2019. DOI: 10.1016/j.jeurceramsoc.2019.01.006
  • E. Macía, A. García-Junceda, M. Serrano, L.A. Díaz, M. Campos - Effect of the heating rate on the microstructure of a ferritic ODS steel with four oxide formers (Y-Ti-Al-Zr) consolidated by spark plasma sintering (SPS). journal of nuclear materials 518, 190-201, 2019. DOI: 10.1016/j.jnucmat.2019.02.043
  • Cleis Santos, Evgeny Senokos, Juan Carlos Fernández-Toribio, Álvaro Ridruejo, Rebeca Marcilla and Juan Vilatela - Pore structure and electrochemical properties of CNT-based electrodes studied by in-situ small/wide angle X-ray scattering. journal of materials chemistry a 7, 5305-5314 , 2019. DOI: 10.1039/C9TA01112A
  • Liu, H; Papadimitriou, I; Lin, FX; LLorca, J - Precipitation during high temperature aging of Al−Cu alloys: A multiscale analysis based on first principles calculations. acta materialia 167, 121-135, 2019. DOI: 10.1016/j.actamat.2019.01.024
  • Zhou, T; Wu, T; Xiang, HN; Li, ZC; Xu, ZL; Kong, QH; Zhang, JH; Li, Z; Pan, YT; Wang, DY - Simultaneously improving flame retardancy and dynamic mechanical properties of epoxy resin nanocomposites through synergistic effect of zirconium phenylphosphate and POSS. journal of thermal analysis and calorimetry 135, 2117-2124, 2019. DOI: 10.1007/s10973-018-7387-4
  • G. Esteban-Manzanares, E. Martínez, J. Segurado, L. Capolungo, J. LLorca. - An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys. acta materialia 162, 189-201, 2019. DOI: 10.1016/j.actamat.2018.09.052
  • Liu, Z. L.; Li, R. Q.; Jiang, R. P.; Zhang, L. H.; Li, X. Q. - Scalable Ultrasound-Assisted Casting of Ultra-large 2219 Al Alloy Ingots. metallurgical and materials transactions a-physical metallurgy and materials science 50A, 1146-1152, 2019. DOI: 10.1007/s11661-018-5097-y
  • Lucarini, S; Segurado, J - On the accuracy of spectral solvers for micromechanics based fatigue modeling. computational mechanics 63, 365-382, 2019. DOI: 10.1007/s00466-018-1598-1
  • Andrea García-Junceda, Coral Díaz-Rivera, Víctor Gómez-Torralba, María Rincón, Mónica Campos, José Manuel Torralba - Analysis of the interface and mechanical properties of field-assisted sintered duplex stainless steels. materials science and engineering a-structural materials properties microstructure and processing 740-741, 410-419, 2019. DOI: 10.1016/j.msea.2018.10.111
  • D. Tourret, M.M. Francois, A.J. Clarke - Multiscale dendritic needle network model of alloy solidification with fluid flow. computational materials science 162, 206-227, 2019. DOI: 10.1016/j.commatsci.2019.02.031
  • Molleja, JG; Burgi, J; Kellermann, G; Craievich, A; Neuenschwander, R; Jouan, PY; Djouadi, MA; Piccoli, M; Bemporad, E; De Felicis, D; Feugeas, JN - Synchrotron Radiation Applied to Real-Time Studies of the Kinetics of Growth of Aluminum Nitride Thin Multilayers. journal of physical chemistry b 123, 1679-1687, 2019. DOI: 10.1021/acs.jpcb.8b09496
  • Xia, P. K.; Vercruysse, F.; Petrov, R.; Sabirov, I.; Castillo-Rodriguez, M.; Verleysen, P. - High strain rate tensile behavior of a quenching and partitioning (Q&P) Fe-0.25C-1.5Si-3.0Mn steel. materials science and engineering a-structural materials properties microstructure and processing 745, 53-62, 2019. DOI: 10.1016/j.msea.2018.12.064
  • C.M.Cepeda-Jiménez, M.Castillo-Rodríguez, M.T.Pérez-Prado - Origin of the low precipitation hardening in magnesium alloys. acta materialia 165, 164-176, 2019. DOI: 10.1016/j.actamat.2018.11.044
  • Peng-Ji Wang, Dui-Jun Liao, Xiao-Ping Hu*, Ning Pan, Wen-Xiong Li, De-Yi Wang, YongYao - Facile fabrication of biobased P-N-C-containing nano-layered hybrid: Preparation, growth mechanism and its efficient fire retardancy in epoxy. polymer degradation and stability 159, 153-162, 2019. DOI: 10.1016/j.polymdegradstab.2018.11.024
  • Langmar, O.; Ganivet, C. R.; Scharl, T.; de la Torre, G.; Torres, T.; Costa, R. D.; Guldi, D. M. - Modifying the Semiconductor/Electrolyte Interface in CuO p-Type Dye-Sensitized Solar Cells: Optimization of Iodide/Triiodide-Based Electrolytes. acs applied energy materials 1-5400, 2019. DOI: 10.1021/acsaem.8b01370
  • Cerda, F. M. C.; Schulz, B.; Celentano, D.; Monsalve, A.; Sabirov, I.; Petrov, R. H. - Exploring the microstructure and tensile properties of cold-rolled low and medium carbon steels after ultrafast heating and quenching. materials science and engineering a-structural materials properties microstructure and processing 745, 509-516, 2019. DOI: 10.1016/j.msea.2018.12.036
  • Torres, J. J.; Simmons, M.; Sket, F.; Gonzalez, C. - An analysis of void formation mechanisms in out-of-autoclave prepregs by means of X-ray computed tomography. composites part a-applied science and manufacturing 117, 230-242, 2019. DOI: 10.1016/j.compositesa.2018.11.010
  • Lomakin, I.; Castillo-Rodriguez, M.; Sauvage, X. - Microstructure, mechanical properties and aging behaviour of nanocrystalline copper-beryllium alloy. materials science and engineering a-structural materials properties microstructure and processing 744 , 206-214, 2019. DOI: 10.1016/j.msea.2018.12.011
  • Moosavi, S. M.; Chidambaram, A.; Talirz, L.; Haranczyk, M.; Stylianou, K. C.; Smit, B. - Capturing chemical intuition in synthesis of metal-organic frameworks. nature communications 10, 2019. DOI: 10.1038/s41467-019-08483-9
  • Garcia-Senz, D.; Velarde, P.; Suzuki-Vidal, F.; Stehle, C.; Cotelo, M.; Portillo, D.; Plewa, T; Pak, A. - Interaction of Hemispherical Blast Waves with Inhomogeneous Spheres: Probing the Collision of a Supernova Ejecta with a Nearby Companion Star in the Laboratory. astrophysical journal 871, Number 2, 2019. DOI: 10.3847/1538-4357/aaf894