Publication

    2020

  • Xia, P.; Canillas-Rodríguez, F.J.; Sabirov, I. - Microstructure evolution and adiabatic heating during dynamic biaxial deformation of a 304 stainless steel. materials science and engineering: a 793, 139829, 2020. DOI: 10.1016/j.msea.2020.139829
  • Barzegar, M.; Costa, J.; Lopes, C.S. - High-fidelity computational micromechanics of first-fibre failure in unidirectional composites: Deformation mechanisms and stress concentration factors. international journal of solids and structures Volumes 204–205, 18-33, 2020. DOI: 10.1016/j.ijsolstr.2020.08.005
  • Yang, L.W.; Mayer, C.R.; Chawla, N.; Llorca, J.; Molina-Aldareguía, J.M. - Nanomechanical characterization of the fracture toughness of Al/SiC nanolaminates. extreme mechanics letters 40, 100945, 2020. DOI: 10.1016/j.eml.2020.100945
  • Rueda-Ruiz, M.; Monclús, M. A.; Beake, B.D.; Gálvez, F.; Molina-Aldareguia, J.M - High strain rate compression of epoxy micropillars. extreme mechanics letters 40, 100905, 2020. DOI: 10.1016/j.eml.2020.100905
  • Zhang, L.; Li, Z.; Wang, D.-Y. - Polydopamine-assisted strategies for preparation of fire-safe polymeric materials: A review. european polymer journal 138, 109973, 2020. DOI: 10.1016/j.eurpolymj.2020.109973
  • Boaretto, N.; Rana, M.; Marcilla, R.; Vilatela, J.J. - Revealing the Mechanism of Electrochemical Lithiation of Carbon Nanotube Fibers. acs applied energy materials 2020, 8695-8705, 2020. DOI: 10.1021/acsaem.0c01267
  • Liu, S.; Esteban-Manzanares, G.; Llorca, J. - First-principles analysis of precipitation in Mg-Zn alloys. physical review materials 4, 093609, 2020. DOI: 10.1103/physrevmaterials.4.093609
  • Wan, J.; Zhao, J.; Zhang, X.; Fan, H.; Zhang, J.; Hu, D.; Jin, P.; Wang, D.-Y. - Epoxy thermosets and materials derived from bio-based monomeric phenols: Transformations and performances. progress in polymer science 108, 101287, 2020. DOI: 10.1016/j.progpolymsci.2020.101287
  • Vilatela, J.J. - Materials Horizons Emerging Investigator Series: Juan José Vilatela, IMDEA Materials Institute, Spain. 10, 2477-2478, 2020. DOI: 10.1039/D0MH90064H
  • Castro, J; Sket, F; González, C. - S-XCT experimental determination of local contact angle and meniscus shape in liquid moulding of composites. 199, 108362, 2020. DOI: 10.1016/j.compscitech.2020.108362
  • Sarigul, G.; Gómez-Palos, I.; Linares, N.; García-Martínez, J.; Costa , R.D.; Serrano, E. - The use of N^N ligands as an alternative strategy for the sol–gel synthesis of visible-light activated titanias. journal of materials chemistry c 36, 12495-12508, 2020. DOI: 10.1039/D0TC03073B
  • Culebras, M.; Ren , G.; O'Connell, S.; Vilatela, J.J.; Collins, M.N. - Lignin Doped Carbon Nanotube Yarns for Improved Thermoelectric Efficiency. advanced sustainable systems , 2020. DOI: 10.1002/adsu.202000147
  • Herrera-Solaza, V.; Cepeda-Jiménez, C.M.; Pérez-Prado, M.T.; Segurado, J.; Niffeneggera, M. - The influence of underlying microstructure on surface stress and strain fields calculated by crystal plasticity finite element method. materials today communications 24, 101176-101176, 2020. DOI: 10.1016/j.mtcomm.2020.101176
  • Wang, Q.; Zhang, J.; Shi, W.; Castillo-Rodríguez, M.; Su, D.S.; Wang, D.-Y. - Coordinating mechanical performance and fire safety of epoxy resin via functionalized nanodiamond. diamond and related materials 108, 107964 - 1-107964 - 12, 2020. DOI: 10.1016/j.diamond.2020.107964
  • Li, Y.-M.; Hu, S.-L.; Wang, D.-Y. - Polymer-based ceramifiable composites for flame retardant applications: A review. composites communications 21, 100405 - 1-100405 - 18, 2020. DOI: 10.1016/j.coco.2020.100405
  • Bia, Q.; Yao, D.; Yin, G.-Z.; You, J.; Li, X.-Q.; Wang, N.; Wang, D.-Y. - Surface engineering of magnesium hydroxide via bioinspired iron-loaded polydopamine as green and efficient strategy to epoxy composites with improved flame retardancy and reduced smoke release. reactive and funcional polymers 155, 104690, 2020. DOI: 10.1016/j.reactfunctpolym.2020.104690
  • Camarena-Maese, F.J.; Martínez-Hergueta, F.; Fernández-Blázquez, J.P.; Kok, R.W.; Reid, J.; Callanan, A. - Multiscale SAXS/WAXD characterisation of the deformation mechanisms of electrospun PCL scaffolds. polymer 203, 122775 - 1-122775 - 12, 2020. DOI: 10.1016/j.polymer.2020.122775
  • Zhang, Z.; Li, Z.; Shao, Z-B.; Zhang, L.; Wang, D.Y. - Hierarchically tailored hybrids via interfacial-engineering of self-assembled UiO-66 and prussian blue analogue: Novel strategy to impart epoxy high-efficient fire retardancy and smoke suppression. chemical engineering journal 400, 125942 - 1-125942 - 12, 2020. DOI: 10.1016
  • Hangfeng, Y.; Hangbo, Y.; Xi, Z.; Minzimo, S.; Jianwei, G.; Cui, Y.; Fernández-Blazquez, J.P.; Wang, D.-Y. - Polycarbonate/Sulfonamide Composites with Ultralow Contents of Halogen-Free Flame Retardant and Desirable Compatibility. materials 13, 3656 -1-3656 - 12, 2020. DOI: 10.3390/ma13173656
  • Rueda-Ruiz, M.; Deakec, B.D.; Molina-Aldareguia, J.M. - New instrumentation and analysis methodology for nano-impact testing. materials & design 192, 108715 - 1-108715 - 12, 2020. DOI: 10.1016
  • Zhang, J.; Li, L.; , Qi, X-L.; Wang, D-Y. - Recent Progress on Metal-Organic Framework and Its Derivatives as Novel Fire Retardants to Polymeric Materials. nano-micro letters 173, 1-21, 2020. DOI: 10.1007/s40820-020-00497-z
  • Salavagione, H.J.; Shuttleworth, P.S.; Fernández-Blázquez, J.F.; Ellis, G.J.; Gómez-Fatou, M.A. - Scalable graphene-based nanocomposite coatings for flexible and washable conductive textiles. carbon 167, 495-503, 2020. DOI: 10.1016/j.carbon.2020.05.108
  • Umuhire Mahoro, G.; Fernandez‐Cestau, J.; Renaud, J‐L.; Coto, P.B.; Costa, R.D.; Gaillard, S. - Recent Advances in Solid‐State Lighting Devices Using Transition Metal Complexes Exhibiting Thermally Activated Delayed Fluorescent Emission Mechanism. advanced optical materials 8, 2000260, 2020. DOI: 10.1002/adom.202000260
  • Acuña, P.; Lin, X..; Calvo, M.S.; Shaoa, Z.; Péreza, N.; Villafañe, F.; Rodríguez-Pérez, M.A.; Wang, D.-Y. - Synergistic effect of expandable graphite and phenylphosphonic-aniline salt on flame retardancy of rigid polyurethane foam. 179, 109274, 2020. DOI: 10.1016/j.polymdegradstab.2020.109274
  • Garcia-Abrego Ch.; Zaunz, S.; Toprakhisar, B.; Subramani. R.; Deschaume. O.; Jooken, S.; Bajaj, M.; Ramon, H.; Verfaillie, C.; Bartic, C.; Patterson, J. - Towards Mimicking the Fetal Liver Niche: The Influence of Elasticity and Oxygen Tension on Hematopoietic Stem/Progenitor Cells Cultured in 3D Fibrin Hydrogels. international journal of molecular science 21, 6367 (1)-6367 (18), 2020. DOI: 10.3390/ijms21176367
  • Fresta, E.; Costa, R.C. - Advances and Challenges in White Light‐Emitting Electrochemical Cells. advanced functional materials 30, 2020. DOI: 10.1002/adfm.201908176
  • Senokos, E.; Rana, M.; Vila, M.; Fernandez-Cestau, J.; Costa, R. D, Marcilla, R.; Vilatela, J.J. - Transparent and flexible high-power supercapacitors based on carbon nanotube fibre aerogels. nanoscale 32, 2020. DOI: 10.1039
  • Martinez-Hergueta, F.; Pellegrino, A.; Ridruejo, A.; Petrinic, N.; Gonzalez, C. ;Llorca, J. - Dynamic Tensile Testing of Needle-Punched Nonwoven Fabrics. applied science 10, 2020. DOI: 10.3390
  • Torralba, J.M.; Alvaredo, P.; Garcia-Junceda, A. - Powder metallurgy and high-entropy alloys: update on new opportunities. powder metallurgy 63, 227-236, 2020. DOI: 10.1080
  • Wang, N.; Liu, H.; Zhang, J.; Zhang, M.; Fang, Q.; Wang, D. - Synergistic effect of graphene oxide and boron-nitrogen structure on flame retardancy of natural rubber/IFR composites. arabian journal of chemistry 13, 6274-6284, 2020. DOI: 10.1016
  • Duan, Y.; Ezquerro, C; Serrano, E; Lalinde, E; Garcia-Martinez, J.; Berenguer, J.R.; Costa, R.D. - Meeting High Stability and Efficiency in Hybrid Light-Emitting Diodes Based on SiO2/ZrO(2)Coated CsPbBr(3)Perovskite Nanocrystals. advanced functional materials , 2005401, 2020. DOI: 10.1002
  • Qibing, P.; Costa, R.D. - 25 Years of Light-Emitting Electrochemical Cells. advanced functional materials 30, 2020. DOI: 10.1002/adfm.202002879
  • Liu, F.; Xin. R.; Zhang, M-X.; Pérez-Prado, M.T.; Liu, Q. - Evaluating the orientation relationship of prismatic precipitates generated by detwinning in Mg alloys. acta materialia 195, 263-273, 2020. DOI: 10.1016/j.actamat.2020.05.031
  • Liu, S.; Martínez, E.; Llorca, J. - Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanics. acta materialia 195, 317-326, 2020. DOI: 10.1016
  • Gebhardt, C. G., Romero, I - The Rotating Rigid Body Model Based on a Non-twisting Frame. journal of nonlinear science , 2020. DOI: 10.1007/s00332-020-09648-3
  • Sancho, R.: Segurado, J.; Erice, B.; Pérez-Martín, M-J.; Gálvez, F - Crystal-Plasticity-Finite-Element Modeling of the Quasi-Static and Dynamic Response of a Directionally Solidified Nickel-Base Superalloy. computational materials modelling 13, 2020. DOI: 10.3390
  • Cepeda-Jiménez, C.C; Potenza, F; Magalini, E; Luchin, V; Molinari, A; Pérez-Prado, M.T. - Effect of energy density on the microstructure and texture evolution of Ti-6Al-4V manufactured by laser powder bed fusion. materials characterization 163, 110238, 2020. DOI: 10.1016/j.matchar.2020.110238
  • Maça, R.R.; Cíntora, D.; Castillo Rodríguez, M.; Etacheri, V. - Nanointerface-driven pseudocapacitance tuning of TiO2 nanosheet anodes for high-rate, ultralong-life and enhanced capacity sodium-ion batteries. chemical engineering journal 391, 123598, 2020. DOI: 10.1016
  • Van der Giessen, E.; Schultz, P.A.; Bertin, N.; Bulatov, V.V.; Cai, W.; Csányi, G.; Foiles, S.M.; Geers, M.G.D.; González, C.; Hütter, M.; Kyun Kim, W.; Kochmann, D.M.; Llorca, J.; Mattsson, A.E.; Rottler, J.; Shluger, A.; Sills, R.B.; Steinbach, I.; Strachan, A.; Tadmor, E.B. - Roadmap on multiscale materials modeling. modelling and simulation in materials science and engineering 28, 043001, 2020. DOI: 10.1088
  • Fresta, E.; Dosso, J.; Cabanillas-Gonzalez, J.; Bonifazi, D.; Costa, R.D. - Revealing the Impact of Heat Generation Using Nanographene-Based Light-Emitting Electrochemical Cells. acs applied materials & interfaces 12, 2842-28434, 2020. DOI: 10.1021
  • Wang, W.Y; Gan, B.; Lin,D.; Wang,j.; Wang,Y.; Tang,B.; Kou,H.; Shang,S.; Wang,Y.; Gao,X.; Song,H.; Hui,X.; Kecskes,L.J.; Xia,Z.; Dahmen,K.A.; Liaw,P.K.; Liu,Z.-L. - High-throughput investigations of configurational-transformation-dominated serrations in CuZr/Cu nanolaminates. journal of materials science & technology 53, 192-199, 2020. DOI: 10.1016
  • Bellon, B.; Haouala, S.; LLorca, J. - An analysis of the influence of the precipitate type on the mechanical behavior of Al – Cu alloys by means of micropillar compression tests. acta materialia 194, 207-223, 2020. DOI: 10.1016
  • Wang, C. Y.; Cepeda-Jimenez, C. M.; Perez-Prado, M. T. - Dislocation-particle interactions in magnesium alloys. acta materialia 194, 190-206, 2020. DOI: 10.1016/j.actamat.2020.04.055
  • Esteban-Manzanares, G.; Alizadeh, R.; Papadimitriou, I.; Dickel, D.; Barrett, C.D.; Llorca, J. - Atomistic simulations of the interaction of basal dislocations with MgZn precipitates in Mg alloys. materials science & engineering a 788, 139555, 2020. DOI: 10.1016
  • Torralba, J.M.; Campos, M. - High Entropy Alloys Manufactured by Additive Manufacturing. metals 10(5), 639, 2020. DOI: 10.3390
  • Requena, G.; Bugelnig, K.; Sket, F.; Milenkovic, S.; Roedler, G.; Weisheit,A.; Gussone, J.; Haubrich, J.; Barriobero-Vila, P.; Pusztai, T.; Gránásy, L.; Theofilatos, A.; Da Silva, J.C.; Hechte, U. - Ultrafine Fe-Fe2Ti eutectics by directed energy deposition: Insights into microstructure formation based on experimental techniques and phase field modelling. additive manufacturing 33, 2020. DOI: 10.1016
  • Zhao, Z.; Bieler, T.R.; LLorca, J.; Eisenlohr, P. - Grain boundary slip transfer classification and metric selection with artificial neural networks. scripta materialia 185, 71-75, 2020. DOI: 10.1016
  • Yang, Y. X.; Haurie, L.; Zhang, J.; Zhang, X-Q.; Wang, R.; Wang, D-Y. - Effect of bio-based phytate (PA-THAM) on the flame retardant and mechanical properties of polylactide (PLA). express polymer letters 14, 705-716, 2020. DOI: 10.3144
  • Pastrana, J.; Dsouza, H.; Cao, Y.; Figueroa, J.; González, I.; Vilatela, J.J.; Sepúlveda, N. - Electrode Effects on Flexible and Robust Polypropylene Ferroelectret Devices for Fully Integrated Energy Harvesters. acs applied materials & interfaces 12, 2020. DOI: 10.1021/acsami.0c02019
  • Wang, Q.; Dang S.S.; Wang, D.-Y. - Carbon Nanotube/Epoxy Composites for Improved Fire Safety. acs applied nano materials 3, 2020. DOI: 10.1021/acsanm.0c00423
  • Xia, P.; Sanchez, M.; Sabirov, I. - Adiabatic heating and energy absorption capability of an advanced high strength steel during drop weight impact testing. materials science and engineering: a 785, 139382-139382, 2020. DOI: 10.1016/j.msea.2020.139382
  • Zhang, Z.; Han, Z.; Pan, Y.-T.; Li, D.; Wang, D.-Y.; Yang, R. - Dry synthesis of mesoporous nanosheet assembly constructed by cyclomatrix polyphosphazene frameworks and its application in flame retardant polypropylene. chemical engineering journal 395, 2020. DOI: 10.1016/j.cej.2020.125076
  • Chen, N.; Molina-Aldareguia, J.; Kou, H.; Qiang, F.; Wu, Z.; Li, J. - Reversion martensitic phase transformation induced {3 3 2}〈1 1 3〉 twinning in metastable β-Ti alloys. materials letters 272, 127883-127883, 2020. DOI: 10.1016/j.matlet.2020.127883
  • Sanchez, J. S.; Ruben, R.; Pendashteh, A.; Etacheri, V.; de la Pena, V. A.; Castillo, M.; Palma, J.; Marcilla, R. - Hierarchical Co3O4 nanorods anchored on nitrogen doped reduced graphene oxide: a highly efficient bifunctional electrocatalyst for rechargeable Zn-air batteries. catalysis science & technology 5, 2020. DOI: 10.1039/C9CY02183C
  • Xiao, Yao; Guo, Beibei; Zhang, Jing; Hu, Chun; Ma, Ruguang; Wang,Deyi; Wang, Jiacheng - A bimetallic MOF@graphene oxide composite as an efficient bifunctional oxygen electrocatalyst for rechargeable Zn-air batteries. dalton transactions 49, 5730-5735, 2020. DOI: 10.1039/D0DT00976H
  • Garcia-Junceda, A.; Macia, E.; Garbiec, D.; Serrano, M.; Torralba, J. M.; Campos, M - Effect of Small Variations in Zr Content on the Microstructure and Properties of Ferritic ODS Steels Consolidated by SPS. metals 10(3), 348-348, 2020. DOI: 10.3390/met10030348
  • Alvaredo-Atienza, A.; Fernandez-Blazquez, J. P.; Castell, P.; Guzman de Villoria, R. - Production of graphene nanoplate/polyetheretherketone composites by semi-industrial melt-compounding. heliyon 6, Issue 4-e03740, 2020. DOI: 10.1016/j.heliyon.2020.e03740
  • Krishnapriyan, A. S.; Haranczyk, M.; Morozov, D. - Topological Descriptors Help Predict Guest Adsorption in Nanoporous Materials. journal of physical chemistry c 124, 17, 9360-9368, 2020. DOI: 10.1021/acs.jpcc.0c01167
  • Conesa-Egea, J.; Gonzalez-Platas, J.; Rodriguez-Mendoza, U. R.; Martinez, J. I.; Pilar, O.; Fernández-Moreira, V.; Costa, R.D.; Fernández-Cestau, J.; Zamora, F.; Amo-Ochoa, P. - Cunning defects: emission control by structural point defects on Cu(i)I double chain coordination polymers. journal of materials chemistry c 4, 2020. DOI: 10.1039/C9TC05185F
  • Santos-Guemes, R.; Bellon, B.; Esteban-Manzanares, G.; Segurado, J.; Capolungo, L.; LLorca, J. - Multiscale modelling of precipitation hardening in Al-Cu alloys: Dislocation dynamics simulations and experimental validation. acta materialia 188, 475-485, 2020. DOI: 10.1016/j.actamat.2020.02.019
  • J. Wang; J. M. Molina-Aldareguía; J. LLorca - Effect of Al content on the critical resolved shear stress for twin nucleation and growth in Mg alloys. acta materialia 188, 215-227, 2020. DOI: 10.1016/j.actamat.2020.02.006
  • S. Lucarini; J. Segurado - An upscaling approach for micromechanics based fatigue: from RVEs to specimens and component life prediction. international journal of fracture 223, 93-108, 2020. DOI: 10.1007/s10704-019-00406-5
  • Y.Wang; I.Vázquez-Rodríguez; C.Santos; E.García-Quismondo; J. Palma; M.A.Anderson; J.J.Lado - Graphite felt 3D framework composites as an easy to scale capacitive deionization electrode for brackish water desalination. chemical engineering journal 392, 123698-123698, 2020. DOI: 10.1016/j.cej.2019.123698
  • E. Fresta; M. A. Monclús; M. Bertz; C. Ezquerro; J. M. Molina‐Aldareguia; J. R. Berenguer; M. Kunimoto; T. Homma; R. D. Costa - Key Ionic Electrolytes for Highly Self‐Stable Light‐Emitting Electrochemical Cells Based on Ir(III) Complexes. advanced optical materials , 2020. DOI: 10.1002/adom.202000295
  • V. N. Sonkusare; R. G. Chaudhary; G. S. Bhusari; A. Mondal; A. K. Potbhare; R. K Mishra; H. D. Juneja; A. A. Abdala - Mesoporous Octahedron-Shaped Tricobalt Tetroxide Nanoparticles for Photocatalytic Degradation of Toxic Dyes. acs omega 5, 14, 7823-7835, 2020. DOI: 10.1021/acsomega.9b03998
  • S. K. Elsaidi; D. Ongari; M. H. Mohamed; W. Xu; R. K. Motkuri; M. Haranczyk; P. K. Thallapally - Metal Organic Frameworks for Xenon Storage Applications. acs materials 2,3, 233-238, 2020. DOI: 10.1021/acsmaterialslett.9b00468
  • Li, Hang; Liu, Sai; li, Gaosheng; Yao, Yiming; Shi, Caijun; Ou, Yunfu; Zhu, Deju - Flexural Performance of Basalt Textile-Reinforced Concrete with Pretension and Short Fibers. journal of materials in civil engineering 32, 3-3, 2020. DOI: 10.1061/(ASCE)MT.1943-5533.0003077
  • J. Zhang; Z. Li; X. Qi; W. Zhang; D.-Y. Wang - Size tailored bimetallic metal-organic framework (MOF) on graphene oxide with sandwich-like structure as functional nano-hybrids for improving fire safety of epoxy. composites part b: engineering 188, 107881-107881, 2020. DOI: 10.1016/j.compositesb.2020.107881
  • R. Alizadeh; J. LLorca - Interactions between basal dislocations and beta(1)’ precipitates in Mg-4Zn alloy: Mechanisms and strengthening. acta materialia 186, 475-486, 2020. DOI: 10.1016/j.actamat.2020.01.028
  • A. Moya; M. Barawi; B. Alemán; P. Zeller; M. Amati; A. Monreal-Bernal; L. Gregoratti; V. A. de la Peña O’Shea; J. J. Vilatela - Interfacial studies in CNT fibre/TiO2 photoelectrodes for efficient H-2 production. applied catalysis b-environmental 268-5, 118613-118613, 2020. DOI: 10.1016/j.apcatb.2020.118613
  • E. Fresta, K. Baumgärtner, J. Cabanillas-Gonzalez, M. Mastalerz, R. D. Costa - Bright, stable, and efficient red light-emitting electrochemical cells using contorted nanographenes. nanoscale horizons 3, 2020. DOI: 10.1039/c9nh00641a
  • Portillo, D.; Oesterle, B.; Thierer, R.; Bischoff, M.; Romero, I. - Structural models based on 3D constitutive laws: Variational structure and numerical solution. computer methods in applied mechanics and engineering 362, 112872-112872, 2020. DOI: 10.1016/j.cma.2020.112872
  • Valdes-Tabernero, M. A.; Kumar, A.; Petrov, R. H.; Monclus, M. A.; Molina-Aldareguia, J. M. - The sensitivity of the microstructure and properties to the peak temperature in an ultrafast heat treated low carbon-steel. materials science and engineering a-structural materials properties microstructure and processing 776, 138999-138999, 2020. DOI: 10.1016/j.msea.2020.138999
  • Rapakousiou, A.; Lopez-Moreno, A.; Nieto-Ortega, B.; Bernal, M. M.; Monclus, M. A. A. - Stronger aramids through molecular design and nanoprocessing. polymer chemistry 11, 1489-1495, 2020. DOI: 10.1039/C9PY01599J
  • Perez-Prado, M-T.; Bohlen, J.; Yi, S.; Letzig, D.; Al-Samman, TalalT. - Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development. jom , 2020. DOI: 10.1007/s11837-020-04051-5
  • L. Zhang; Q. Wang; R.-K. Jianac; D.-Y. Wang - Bioinspired iron-loaded polydopamine nanospheres as green flame retardants for epoxy resin via free radical scavenging and catalytic charring. journal of materials chemistry a 5, 2020. DOI: 10.1039/C9TA11021F
  • Wang, Z. J.; Liu, S.; Qiu, Z. X.; Sun, H. Y.; Liu, W. C. - First-principles calculations on the interface of the Al/TiC aluminum matrix composites. applied surface science 505, 144502-144502, 2020. DOI: 10.1016/j.apsusc.2019.144502
  • Wang, C.; Monclus, M. A.; Yang, L.; Cui, Y.; Perez-Prado, M. T. - Effect of nanoscale alpha precipitation on slip activity in ultrastrong beta titanium alloys. materials letters 264, 127398-127398, 2020. DOI: 10.1016/j.matlet.2020.127398
  • Wen, W.; Shuttleworth, P. S.; Yue, H.; Fernandez-Blazquez, J. P.; Guo, J. - Exceptionally Stable Microporous Organic Frameworks with Rigid Building Units for Efficient Small Gas Adsorption and Separation. acs applied materials & interfaces 12-6, 7548-7556, 2020. DOI: 10.1021/acsami.9b20771
  • Wen, W.; Shuttleworth, P. S.; Yue, H.; Fernandez-Blazquez, J.P.; Guo, J. - Exceptionally Stable Microporous Organic Frameworks with Rigid Building Units for Efficient Small Gas Adsorption and Separation. acs applied materials & interfaces 12-6, 7548-7556, 2020. DOI: 10.1021/acsami.9b20771
  • Haouala, S.; Alizadeh, R.; Bieler, T. R.; Segurado, J.; LLorca, J. - Effect of slip transmission at grain boundaries in Al bicrystals. international journal of plasticity 126, 102600-102600, 2020. DOI: 10.1016/j.ijplas.2019.09.006
  • Wen, X.; Liu, Z.; Li, Z.; Zhang, J.; Wang, D. - Constructing multifunctional nanofiller with reactive interface in PLA/CB-g-DOPO composites for simultaneously improving flame retardancy, electrical conductivity and mechanical properties. composites science and technology 188, 107988-107988, 2020. DOI: 10.1016/j.compscitech.2019.107988
  • Z. Zhang, J. Qin, W. Zhang, Y-T. Pan, D-Y. Wang, R. Yang - Synthesis of a novel dual layered double hydroxide hybrid nanomaterial and its application in epoxy nanocomposites. chermical engineering journal -122777, 2020. DOI: 10.1016/j.cej.2019.122777
  • X. Wen, Z. Liu, Z. Li, J. Zhang, D-Y. Wang, K. Szymanska, X. Chen, E. Mijowska, T. Tang - Constructing multifunctional nanofiller with reactive interface in PLA/CB-g-DOPO composites for simultaneously improving flame retardancy, electrical conductivity and mechanical properties. composites science and technology , 107988-107988, 2020. DOI: 10.1016/j.compscitech.2019.107988
  • Esteban-Manzanares, G.; Santos-Guemes, R.; Papadimitriou, I.; Martinez, E.; LLorca, J. - Influence of the stress state on the cross-slip free energy barrier in Al: An atomistic investigation. acta materialia 184, 109-119, 2020. DOI: 10.1016/j.actamat.2019.10.055
  • R. Alizadeh, M. Peña-Ortega, T. R. Bieler, J. LLorca - A criterion for slip transfer at grain boundaries in Al. scripta materialia 178, 408-412, 2020. DOI: 10.1016/j.scriptamat.2019.12.010
  • Feng, W; Maça R.R.; Etacheri V. - High-Energy-Density Sodium-Ion Hybrid Capacitors Enabled by Interface-Engineered Hierarchical TiO2 Nanosheet Anodes. acs applied materials & interfaces 12,4, 4443-4453, 2020. DOI: 10.1021/acsami.9b17775
  • Santiago, J. A.; Fernandez-Martinez, I.; Sanchez-Lopez, J. C.; Rojas, T. C.; Wennberg, A. - Tribomechanical properties of hard Cr-doped DLC coatings deposited by low-frequency HiPIMS. surface and coatings technology 382, 124899-124899, 2020. DOI: 10.1016/j.surfcoat.2019.124899
  • Fernandez-Toribio, Juan C.; Mikhalchan, Anastasiia; Santos, Cleis; Ridruejo, Alvaro; Vilatela, Juan J. - Understanding cooperative loading in carbon nanotube fibres through in-situ structural studies during stretching. carbon 156, 430-437, 2020. DOI: 10.1016/j.carbon.2019.09.070
  • Herraez, M.; Bergan, A. C.; Lopes, C. S.; Gonzalez, C. - Computational micromechanics model for the analysis of fiber kinking in unidirectional fiber-reinforced polymers. mechanics of materials 142, 103299-103299, 2020. DOI: 10.1016/j.mechmat.2019.103299
  • A.C. Bergana; M. Herráez; C. González; C. S.Lopes - A constitutive model for fiber kinking: Formulation, finite element implementation, and verification. composites part a: applied science and manufacturing 129, 105682-105682, 2020. DOI: 10.1016/j.compositesa.2019.105682
  • Zhang, Lu; Liu, Wei; Wen, Xin; Chen, Jiayin; Zhao, Chenshou - Electrospun submicron NiO fibers combined with nanosized carbon black as reinforcement for multi-functional poly(lactic acid) composites. composites part a-applied science and manufacturing 129, 105662-105662, 2020. DOI: 10.1016/j.compositesa.2019.105662
  • M. Magri; G. Lemoine; L. Adam; J. Segurado - A coupled model of diffusional creep of polycrystalline solids based on climb of dislocations at grain boundaries. journal of the mechanics and physics of solids 135, 103786-103786, 2020. DOI: 10.1016/j.jmps.2019.103786
  • M. Marvi-Mashhadi; C. S. Lopes; J. LLorca - High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams. journal of the mechanics and physics of solids 135-103814, 2020. DOI: 10.1016/j.jmps.2019.103814
  • Fresta, E.; Dosso, J.; Cabanillas-Gonzalez, J.; Bonifazi, D.; Costa, R. - Origin of the Exclusive Ternary Electroluminescent Behavior of BN-Doped Nanographenes in Efficient Single-Component White Light-Emitting Electrochemical Cells. advanced functional materials 1, 2020. DOI: 10.1002/adfm.201906830
  • A.Mikhalchan; T. Earn Taya; A.M. Banas; K.Banas; M.B.H.Breese; A.M. Borkowska; M.Nowakowski; W.M.Kwiatek; C. Paluszkiewicz - Development of continuous CNT fibre-reinforced PMMA filaments for additive manufacturing: A case study by AFM-IR nanoscale imaging. materials letters Volume 262, 127182-127182, 2020. DOI: 10.1016/j.matlet.2019.127182
  • O. Zabihi; M. Ahmadi; Q. Lia; M. Reza; G. Ferdowsi; R. Mahmoodi; E. NaderiKalali; D. Y. Wang; M. Naebe - A sustainable approach to scalable production of a graphene based flame retardant using waste fish deoxyribonucleic acid. journal of cleaner production Volume 247, 19150-119150, 2020. DOI: 10.1016/j.jclepro.2019.119150
  • Hernandez, R.; Serrano, M.; Garcia-Junceda, A.; Onorbe, E.; Vivas, J. - Improvement of High Temperature Creep Strength of Conventional Grade 91 Steel by Thermomechanical Treatments. vessels and pipping conference proceedings , 2020. DOI: 10.1115/PVP2019-93148
  • C. Pascual; M. Iragi; A. Fernández; J. P. Fernández-Blázquez; L. Aretxabalet; C. S. Lopes - An approach to analyse the factors behind the micromechanical response of 3D-printed composites. composites part b: engineering Volume 186, 107820-Volume 186, 1 April 2020, 107820, 2020. DOI: 10.1016/j.compositesb.2020.107820
  • Haouala, S.; Lucarini, S.; LLorca, J.; Segurado, J. - Simulation of the Hall-Petch effect in FCC polycrystals by means of strain gradient crystal plasticity and FFT homogenization. journal of the mechanics and physics of solids 134, 103755-103755, 2020. DOI: 10.1016/j.jmps.2019.103755