Publication

    2021

  • Shao, Z.; Cui, J.; Li, X.; Diaz Palencia, J. L.; Wang, D. - Chemically inorganic modified ammonium polyphosphate as eco-friendly flame retardant and its high fire safety for epoxy resin. composites communications 28, 100959-100959, 2021. DOI: 10.1016/j.coco.2021.100959
  • Torralba, J. M. - Powder Metallurgy: A New Open Section in Metals. metals 11 (10), 1519-1519, 2021. DOI: 10.3390/met11101519
  • Yuan, Y. ; Pan, Y-T.; Zhang, W. ; Feng, M. ; Wang, N. ; Wang, D.; Yang, R. - Delamination and Engineered Interlayers of Ti3C2 MXenes using Phosphorous Vapor toward Flame-Retardant Epoxy Nanocomposites. acs applied materials & interfaces 13, 40, 48196-48207, 2021. DOI: 10.1021/acsami.1c11863
  • Kulchar, R. J.; Denzer, B. R.; Chavre, B. M.; Takegami, M.; Patterson, J. - A Review of the Use of Microparticles for Cartilage Tissue Engineering. international journal of molecular sciences 22(19), 10292-10292, 2021. DOI: 10.3390/ijms221910292
  • Yin, Guang-Zhong; Palencia, Jose Luis Diaz; Wang, De-Yi - Fully bio-based Poly (Glycerol-Itaconic acid) as supporter for PEG based form stable phase change materials. composites communications 27, 100893-100893, 2021. DOI: 10.1016/j.coco.2021.100893
  • Hernandez, T.; Morono, A.; Sanchez, F. J.; Maffiotte, C.; Monclus, M. A.; González-Arrabal, R. - Study of deuterium permeation, retention, and desorption in SiC coatings submitted to relevant conditions for breeder blanket applications: thermal cycling effect under electron irradiation and oxygen exposure. journal of nuclear materials 557, 153219-153219, 2021. DOI: 10.1016/j.jnucmat.2021.153219
  • Chao, Qi; Sabirov, Ilchat; Guo, Tingting; Hodgson, Peter D.; Beladi, Hossein - Tailoring the deformation characteristics of commercial purity titanium through hot deformation of a martensitic microstructure. materials science and engineering: a 827, 142075-142075, 2021. DOI: 10.1016/j.msea.2021.142075
  • Ali, Wahaaj; Echeverry-Rendon, Monica; Kopp, Alexander; Gonzalez, Carlos; LLorca, Javier - Strength, corrosion resistance and cellular response of interfaces in bioresorbable poly-lactic acid/Mg fiber composites for orthopedic applications. journal of the mechanical behavior of biomedical materials 123, 104781-104781, 2021. DOI: 10.1016/j.jmbbm.2021.104781
  • Alvaredo, Paula; Torralba, Jose M.; García-Junceda, Andrea. - Sintering of High Entropy Alloys: Processing and Properties. elsevier 3, 362-371, 2021. DOI: 10.1016/B978-0-12-819726-4.00106-X
  • Sabirov, Ilchat; Santofimia, Maria J.; Petrov, Roumen H. - Advanced High-Strength Steels by Quenching and Partitioning. metals 11(9), 1419-1419, 2021. DOI: 10.3390/met11091419
  • Diaz-Nunez, Pablo; Thomae, Sabrina L. J.; Gonzalez-Rubio, Guillermo; Borrell-Grueiro, Olivia; Hoeller, Roland P. M.; Chanana, Munish; Garoz, David; Bañares, Luis; Junquera, Elena; Guerrero-Martínez, Andrés; Rivera, Antonio; Peña-Rodríguez, Ovidio - Rod-sphere cluster irradiation with femtosecond laser pulses: cut and paste at the nanoscale. nanophotonics 10 (12)-3159, 2021. DOI: 10.1515/nanoph-2021-0240
  • Garbiec, Dariusz; Leshchynsky, Volf; Garcia-Junceda, Andrea; Swadzba, Radoslaw; Siwak, Piotr; Adamek, Grzegorz; Radwański, Krzysztof - Microstructure and Mechanical Properties of Spark Plasma Sintered and Severely Deformed AA7075 Alloy. nanophotonics 11(9), 1433-1433, 2021. DOI: 10.3390/met11091433
  • Fu, Can; Ye, Wen; Zhai, Zhongjie; Zhang, Jing; Li, Pingyang; Xu, Baoyun; Li, Xiaolei; Gao, Fei; Zhai, Jinguo; Wang, De-Yi - Self-cleaning cotton fabrics with good flame retardancy via one-pot approach. polymer degradation and stability 192, 109700-109700, 2021. DOI: 10.1016/j.polymdegradstab.2021.109700
  • Aguirre Ocampo, Robinson; Echeverry-Rendon, Monica; Robledo, Sara; Echeverria Echeverria, Felix - Effect of TiO2 nanotubes size, heat treatment, and UV irradiation on osteoblast behavior. materials chemistry and physics 275, 125137-125137, 2021. DOI: 10.1016/j.matchemphys.2021.125137
  • Becker, C. Gus; Tourret, Damien; Smith, Doug; Rodgers, Brian; Imhoff, Seth; Gibbs, John; Hunter, James; Espy, Michelle; Clarke, Kester ; Clarke, Amy - Integrating In Situ x-Ray Imaging, Energy Dispersive Spectroscopy, and Calculated Phase Diagram Analysis of Solute Segregation During Solidification of an Al-Ag Alloy. jom , 2021. DOI: 10.1007/s11837-021-04884-8
  • Martinez-Alonso, Carmen; Manuel Guevara-Vela, Jose; LLorca, Javier - The effect of elastic strains on the adsorption energy of H, O, and OH in transition metals. physical chemistry chemical physics 23, 21295-21306, 2021. DOI: 10.1039/D1CP03312C
  • Magri, M.; Lucarini, S.; Lemoine, G.; Adam, L.; Segurado, J. - An FFT framework for simulating non-local ductile failure in heterogeneous materials. computer methods in applied mechanics and engineering 380, 113759-113759, 2021. DOI: 10.1016/j.cma.2021.113759
  • Castro, J.; Sket, F.; Helfen, L.; Gonzalez, C. - In situ local imaging and analysis of impregnation during liquid moulding of composite materials using synchrotron radiation computed laminography. composites science and technology 215, 108999-108999, 2021. DOI: 10.1016/j.compscitech.2021.108999
  • Jin, Xueze; Xu, Wenchen; Yang, Guojing; Shan, Debin; Guo, Bin - Microstructure evolution and strengthening mechanisms of Mg-6Gd-4Y-0.5Zn-0.5Zr alloy during hot spinning and aging treatment. materials science and engineering: a 827, 142035-142035, 2021. DOI: https://doi.org/10.1016/j.msea.2021.142035
  • Duan, Yanyan; Wang, De-Yi; Costa, Ruben D. - Recent Progress on Synthesis, Characterization, and Applications of Metal Halide Perovskites@Metal Oxide. advanced functional materials , 2021. DOI: 10.1002/adfm.202104634
  • Gibney, Rory; Patterson, Jennifer; Ferraris, Eleonora - High-Resolution Bioprinting of Recombinant Human Collagen Type III. polymers 13(17), 2973-2973, 2021. DOI: 10.3390/polym13172973
  • Romero, Ignacio; Andres, Eva M.; Ortiz-Toranzo, Angel - Variational updates for general thermo–chemo–mechanical processes of inelastic solids. computer methods in applied mechanics and engineering 385, 114013-114013, 2021. DOI: 10.1016/j.cma.2021.114013
  • Wang, Jingya; Chen, Yiwen; Chen, Zhe; Llorca, Javier; Zeng, Xiaoqin - Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests. acta materialia 217, 117151-117151, 2021. DOI: 10.1016/j.actamat.2021.117151
  • Shao, Zhu-Bao; Zhang, Jing; Jian, Rong-Kun; Sun, Chang-Chun; Li, Xiao-Lu; Wang, De-Yi - A strategy to construct multifunctional ammonium polyphosphate for epoxy resin with simultaneously high fire safety and mechanical properties. composites part a: applied science and manufacturing 149, 106529-106529, 2021. DOI: 10.1016/j.compositesa.2021.106529
  • Chen, Nana; Kou, Hongchao; Wu, Zhihong; Qiang, Fengming; Hua, Ke; Fan, Jiangkun, Tang, Bin; Li, Jinshan; Molina-Aldareguia, Jon M. - Microstructural sensitivity and deformation micro-mechanisms of a bimodal metastable beta titanium Ti-7Mo-3Nb-3Cr-3Al alloy. materials science and engineering: a 824, 141821-141821, 2021. DOI: 10.1016/j.msea.2021.141821
  • Jacobo-Martin, Alejandra; Hernandez, Jaime J.; Pedraz, Patricia; Navarro-Baena, Ivan; Monclus, Miguel A.; et al. - Enhanced Mechanical and Thermal Resistances of Nanoimprinted Antireflective Moth‐Eye Surfaces Based on Poly Vinylidene Fluoride/TiO 2 Surface Nanocomposites. advanced engineering materials , 2021. DOI: 10.1002/adem.202100603
  • Liu, S.; Esteban-Manzanares, G.; LLorca, J. - First Principles Prediction of the Al-Li Phase Diagram. metallurgical and materials transactions a-physical metallurgy and materials science , 2021. DOI: 10.1007/s11661-021-06419-x
  • Andreev, K.; Yin, Y.; Luchini, B.; Sabirov, I. - Failure of refractory masonry material under monotonic and cyclic loading-Crack propagation analysis. construction and building materials 299, 124203-124203, 2021. DOI: 10.1016/j.conbuildmat.2021.124203
  • Ciurduc, Diana Elena; Boaretto, Nicola; Fernandez-Blazquez, Juan P.; Marcilla, Rebeca - Development of high performing polymer electrolytes based on superconcentrated solutions. journal of power sources 506, 230220-230220, 2021. DOI: 10.1016/j.jpowsour.2021.230220
  • Mendez, A.; Monclus, M. A.; Santiago, J. A.; Fernandez-Martinez, I.; Rojas, T. C.; et al. - Effect of Al content on the hardness and thermal stability study of AlTiN and AlTiBN coatings deposited by HiPIMS. surface & coatings technology 422, 127513-127513, 2021. DOI: 10.1016/j.surfcoat.2021.127513
  • Dieringa, Hajo; StJohn, David; Perez Prado, Maria Teresa; Kainer, Karl Ulrich - Editorial: Latest Developments in the Field of Magnesium Alloys and Their Applications. frontiers in materials July, 2021. DOI: 10.3389/fmats.2021.726297
  • Vincent, Mewin; Avvaru, Venkata Sai; Rodriguez, Miguel Castillo; Haranczyk, Maciej; Etacheri, Vinodkumar - High-rate and ultralong-life Mg-Li hybrid batteries based on highly pseudocapacitive dual-phase TiO2 nanosheet cathodes. journal of power sources 506, 230118-230118, 2021. DOI: 10.1016/j.jpowsour.2021.230118
  • Liu, Wei; Pan, Ye-Tang; Zhang, Jing; Zhang, Lu; Moya, Jose Serafin; Cabal, Belén; Wang, De-Yi - Low-melting phosphate glasses as flame-retardant synergists to epoxy: Barrier effects vs flame retardancy. polymer degradation and stability 185, 109495-109495, 2021. DOI: 10.1016/j.polymdegradstab.2021.109495
  • Yang, Yuan; Diaz Palencia, Jose Luis; Wang, Na; Jiang, Yan; Wang, De-Yi - Nanocarbon-Based Flame Retardant Polymer Nanocomposites. molecules 26 (15), 4670-4670, 2021. DOI: 10.3390/molecules26154670
  • Banait, S.; Jin, X.; Campos, M.; Perez-Prado, M. T. - Precipitation-induced transition in the mechanical behavior of 3D printed Inconel 718 bcc lattices. scripta materialia 203, 114075-114075, 2021. DOI: 10.1016/j.scriptamat.2021.114075
  • Gebhardt, C.G.; Romero, I. - On a nonlinear rod exhibiting only axial and bending deformations: mathematical modeling and numerical implementation. acta mechanica , 2021. DOI: 10.1007/s00707-021-03038-w
  • Piluso, S.; Skvortsov, A.; Altunbek, M.; Afghah, F.; Khani, N., Koç, B.; Patterson, J. - 3D bioprinting of molecularly engineered PEG-based hydrogels utilizing gelatin fragments. biofabrication 13, 4, 045008-045008, 2021. DOI: 10.1088/1758-5090/ac0ff0
  • María Vila, Seungki Hong, Seunggyu Park, Anastasiia Mikhalchan, Bon-Cheol Ku, Jun Yeon Hwang, and Juan J. Vilatela - Identification of Collapsed Carbon Nanotubes in High-Strength Fibers Spun from Compositionally Polydisperse Aerogels. acs applied nano materials 4, 7, 6947-6955, 2021. DOI: 10.1021/acsanm.1c00969
  • Garcia-Junceda, Andrea; Rodriguez, Diego; Hernandez, Rebeca; Serrano, Marta - Investigation of the Effect of 475 degrees C Aging Treatment on Mechanical Properties of a Fe-19Cr-5.5Al ODS Alloy Using Tensile, Impact and Small Punch Tests. metallurgical and materials transactions a-physical metallurgy and materials science , 2021. DOI: 10.1007/s11661-021-06402-6
  • Rana, M.; Boaretto, N.; Mikhalchan, A.; Vila, M.; Marcilla, R.; Vilatela, J.J. - Composite Fabrics of Conformal MoS2 Grown on CNT Fibers: Tough Battery Anodes without Metals or Binders. acs applied energy materials 4, 6, , 5668-5676, 2021. DOI: 10.1021/acsaem.1c00482
  • Galera-Rueda, C.; Montero-Sistiaga, M. L.; Vanmeensel, K.; Godino-Martinez, M.; Llorca, J.; Pérez-Prado, M.T. - Icosahedral quasicrystal-enhanced nucleation in Al alloys fabricated by selective laser melting. additive manufacturing 44, 102053-102053, 2021. DOI: 10.1016/j.addma.2021.102053
  • Segurado, J.; Lebensohn, R. A. - An FFT-based approach for Bloch wave analysis: application to polycrystals. computational mechanics July, 2021. DOI: 10.1007/s00466-021-02055-9
  • Marti, J.; de la Vega, J.; Wang, D.; Onate, E. - Numerical Simulation of Flame Retardant Polymers Using a Combined Eulerian-Lagrangian Finite Element Formulation. applied sciences-basel 11(13), 5952-5952, 2021. DOI: 10.3390/app11135952
  • Macia, E.; Garcia-Junceda, A.; Serrano, M.; Hong, S. J.; Campos, M. - Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y-Ti-Al-Zr) addition processed by Spark Plasma Sintering (SPS). nuclear engineering and technology 53, Issue 8, 2582-2590, 2021. DOI: 10.1016/j.net.2021.02.002
  • Li, Na; Yang, Lingwei; Wang, Chuanyun; Monclus, M. A.; Shi, Dongfeng; Molina-Aldareguía, Jon Mikel - Deformation mechanisms of basal slip, twinning and non-basal slips in Mg-Y alloy by micropillar compression. materials science and engineering: a 819, 141408-141408, 2021. DOI: 10.1016/j.msea.2021.141408
  • Yin, Guang-Zhong; Hobson, Jose; Duan, Yanyan; Wang, De-Yi - Polyrotaxane: New generation of sustainable, ultra-flexible, form-stable and smart phase change materials. energy storage materials 40, 347-357, 2021. DOI: 10.1016/j.ensm.2021.05.023
  • Marvi-Mashhadi, M.; Vaz-Romero, A.; Sket, F.; Rodriguez-Martinez, J. A. - Finite element analysis to determine the role of porosity in dynamic localization and fragmentation: Application to porous microstructures obtained from additively manufactured materials. international journal of plasticity 143, 102999, 2021. DOI: 10.1016/j.ijplas.2021.102999
  • Martin, A.; San Sebastian, M.; Gil, E.; Wang, C. Y.; Milenkovic, S.; Pérez-Prado, M.T.; Cepeda-Jiménez, C.M. - Effect of the heat treatment on the microstructure and hardness evolution of a AlSi10MgCu alloy designed for laser powder bed fusion. materials science and engineering: a 819, 141487, 2021. DOI: 10.1016/j.msea.2021.141487
  • Li, Z.; Bucior, B.J.; Chen, H.; Haranczyk, M.; Siepmann, J.I.; Snurr, R.Q. - Realization of High Energy Density Sodium-Ion Hybrid Capacitors through Interface Engineering of Pseudocapacitive 3D-CoO-NrGO Hybrid Anodes. journal of chemical physics 155, 014701 , 2021. DOI: 10.1063/5.0050823
  • Feng, W.; Avvaru, V.S.; Maca, R.R.; Hinder, S. J.; Castillo-Rodriguez, M.; Etacheri, V. - Realization of High Energy Density Sodium-Ion Hybrid Capacitors through Interface Engineering of Pseudocapacitive 3D-CoO-NrGO Hybrid Anodes. 13, 27999-28009, 2021. DOI: 10.1021/acsami.1c01207
  • Lopez-Cabanas, I.; LLorca., J.; Gonzalez-Arrabal, R.; Meletis, E.I; Molina-Aldareguia, J.M. - High throughput optimization of hard and tough TiN/Ni nanocomposite coatings by reactive magnetron sputter deposition. surface & coatings technology 418, 127226, 2021. DOI: https://doi.org/10.1016/j.surfcoat.2021.127226
  • Mikhalchan, A.; Vila, M.; Arevalo, L.; Vilatela, J. J. - Simultaneous improvements in conversion and properties of molecularly controlled CNT fibres. carbon 179, 417-424, 2021. DOI: 10.1016/j.carbon.2021.04.033
  • Donoro, Alvaro; Munoz-Mauricio, Alvaro; Etacheri, Vinodkumar - High-Performance Lithium Sulfur Batteries Based on Multidimensional Graphene-CNT-Nanosulfur Hybrid Cathodes. batteries 7, 26 (1)-26 (17), 2021. DOI: 10.3390/batteries7020026
  • Alvaredo-Olmos, P.; Molina-Aldareguia, J; Vaz-Romero, A.; Prieto, E.; Gonzalez-Julian, J.;Monclús, M.A. - Understanding the Links between the Composition-Processing-Properties in New Formulations of HEAs Sintered by SPS. metals 11, 1-14, 2021. DOI: 10.3390/met11060888
  • Lo Dico, G.; Peña, A.; Carcelén, V.; Haranczyk, M. - Machine-learning-accelerated multimodal characterization and multiobjective design optimization of natural porous materials. chemical science , 2021. DOI: 10.1039/D1SC00816A
  • Li, X.; Zhang, J.; Zhang, L.; Ruiz de Luzuriaga, A.; Rekondo, A.; Wang, D.-Y. - Recyclable flame-retardant epoxy composites based on disulfide bonds: Flammability and recyclability. composites communications 25, 100754, 2021. DOI: 10.1016/j.coco.2021.100754
  • Duan, Y.; Yin, G.-Z.; Wang, D.-Y.; Costa, R.C. - In Situ Ambient Preparation of Perovskite-Poly(L-lactic acid) Phosphors for Highly Stable and Efficient Hybrid Light-Emitting Diodes. acs applied materials & interfaces 13, 21800-21809, 2021. DOI: 10.1021/acsami.1c04025
  • Torralba, J.M.; Kumaránb, V. - Development of competitive high-entropy alloys using commodity powders. materials letters 301, 130202, 2021. DOI: 10.1016/j.matlet.2021.130202
  • Kancharlapalli, S.; Gopalan, A.; Haranczyk, M.; Snurr, R.Q. - Fast and Accurate Machine Learning Strategy for Calculating Partial Atomic Charges in Metal-Organic Frameworks. journal of chemical theory and computation 17, 3052-3064, 2021. DOI: 10.1021/acs.jctc.0c01229
  • Omar, H.; Smales, G.J.; Henning, S.; Li, Z.; Wang, D.-Y.; Schönhals, A.; Szymoniak, P. - Calorimetric and Dielectric Investigations of Epoxy-Based Nanocomposites with Halloysite Nanotubes as Nanofillers. polymers 13, 1634, 2021. DOI: 10.3390/polym13101634
  • Yang, Y.; Wang, D.-Y.; Haurie, L.; Liu, Z.; Zhang, L. - Combination of Corn Pith Fiber and Biobased Flame Retardant: A Novel Method toward Flame Retardancy, Thermal Stability, and Mechanical Properties of Polylactide. polymer 13, 1562, 2021. DOI: 10.3390/polym13101562
  • Fu, C.; Xu, B.; Dong, L.; Zhai, J.; Wang, X.; Wang, D.-Y. - Highly efficient BiVO4 single-crystal nanosheets with dual modification: phosphorus doping and selective Ag modification. nanotechnology 32, 325701, 2021. DOI: 10.1088/1361-6528/abfc0b
  • Krishnapriyan, A.S.; Montoya, J.; Haranczyk, M.; Hummelshø, J.; Morozov, D. - Machine learning with persistent homology and chemical word embeddings improves prediction accuracy and interpretability in metal-organic frameworks. scientific reports 11, 8888, 2021. DOI: 10.1038/s41598-021-88027-8
  • Sapanathan, T.; Sabirov, I.; Xia, P.; Monclús, M.A.; Molina-Aldareguía, J.; Jacques, J.; Simar, A. - High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics. scripta materialia 200, 113910, 2021. DOI: 10.1016/j.scriptamat.2021.113910
  • Santos-Güemes, R.; Capolungo, L.; Segurado, J.; Llorca, J. - Dislocation dynamics prediction of the strength of Al-Cu alloys containing shearable θ ′ ′ precipitates. 151, 104375, 2021. DOI: 10.1016/j.jmps.2021.104375
  • Sun, Ch.-Ch.; Yusuf, A.; Li, Sh.-W.; Qi, X-L.; Ma, Y.; Wang, D.-Y. - Metal organic frameworks enabled rational design of multifunctional PEO-based solid polymer electrolytes. chemical engineering journal 414, 128702, 2021. DOI: 10.1016/j.cej.2021.128702
  • Zhang, M.; Nguyen, K.; Segurado, J.; Montáns, F.J. - A multiplicative finite strain crystal plasticity formulation based on additive elastic corrector rates: Theory and numerical implementation. international journal of plasticity 137, 102899, 2021. DOI: 10.1016/j.ijplas.2020.102899
  • Galera-Rueda, C.; Nieto-Valeiras, E.; Gardon, M.; Pérez-Prado, M.-T.; Llorca, J. - Effect of ZrH2 particles on the microstructure and mechanical properties of IN718 manufactured by selective laser melting. materials science & engineering a 813, 141123, 2021. DOI: 10.1016/j.msea.2021.141123
  • Zabihi, O.; Ahmadi, M.;Yadav, R.; Mahmoodi, R.; Kalali, E.N.; Nikafshar, S.; Reza Ghandehari Ferdowsi, M.; Wang, D.-Y.; Naebe, M. - Novel Phosphorous-Based Deep Eutectic Solvents for the Production of Recyclable Macadamia Nutshell-Polymer Biocomposites with Improved Mechanical and Fire Safety Performances. acs sustainable chemistry & engineering 9, 4463-4476, 2021. DOI: 10.1021/acssuschemeng.0c08447
  • Zabihi, O.; Ahmadi, R.; Yadav, R.; Mahmoodi, R.; Kalali, E.N.; Nikafshar, S.; Ghandehari Ferdowsi, M.R.; Wang, D.-Y.; Naebe, M. - Novel Phosphorous-Based Deep Eutectic Solvents for the Production of Recyclable Macadamia Nutshell-Polymer Biocomposites with Improved Mechanical and Fire Safety Performances. acs sustainable chemistry & engineering , 4463-4476, 2021. DOI: 10.1021/acssuschemeng.0c08447
  • Zhang, L. Ou, Y.; Wang, D.-Y - Surface functionalization of carbon fabric towards high-performance epoxy composites via enhanced fiber-matrix interfacial strength and intergrowth charring behavior. express polymer letters 15, 503-514, 2021. DOI: 10.3144/expresspolymlett.2021.43
  • EzEldeen, M.; Toprakhisar, B.; Murgia, D.; Smisdom, N.; Deschaume, O.; Bartic, C.; Oosterwyck, H.V.; Vaz Sousa Pereira, R.; Opdenakker, G.; Lambrichts, I.; Bronckaers, A.; Jacobs, R.; Patterson, J. - Chlorite oxidized oxyamylose differentially influences the microstructure of fibrin and self assembling peptide hydrogels as well as dental pulp stem cell behavior. scientific reports 11, 5687, 2021. DOI: 10.1038/s41598-021-84405-4
  • Jian, R.-K.; Lin, X.-B.; Liu, Z.-Q.; Zhang, W.; Zhang, J.; Zhang, L.; Li, Z.; Wang, D.-Y. - Rationally designed zinc borate@ZIF-8 core-shell nanorods for curing epoxy resins along with low flammability and high mechanical property. composites part b: engineering 200, 108349, 2021. DOI: 10.1016/j.compositesb.2020.108349
  • Pascual-González, C.; San Martín, P.; Lizarralde, A.; Fernández, A.; León, A.; Lopes, C.S.; Fernández-Blázquez, J.P. - Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites. composites part b: engineering 210, 221-108652, 2021. DOI: 10.1016/j.compositesb.2021.108652
  • Pascual-González, C.; San Martín, P.; Lizarralde, L.; Fernández, A.; León, A.; Lopes, C.S.; Fernández-Blázquez, J.P. - Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites. composites part b: engineering 210, 108652, 2021. DOI: 10.1016/j.compositesb.2021.108652
  • Fernández, A.; Santangelo-Muro, M.; Fernández-Blázquez, J.P.; Lopes, C.; Molina-Aldareguia, J.M. - Processing and properties of long recycled-carbon-fibre reinforced polypropylene. composites part b: engineering 211, 108653, 2021. DOI: 10.1016/j.compositesb.2021.108653
  • Durst, K.; Sebastiani, M.; Korsunsky, A.M.. - Preface – Virtual Special Issue on nanomechanical testing in materials research and development. materials & design 176, 107832, 2021. DOI: 10.1016/j.matdes.2020.109407
  • Szymoniak, P.; Qu, X.; Abbasi, M.; Pauw, B.R.; Henning, S.; Li, Z.; Wang, D.-Y.; Schick, C.; Saalwächter, K.; Schönhals, A. - Spatial inhomogeneity, interfaces and complex vitrification kinetics in a network forming nanocomposite. soft matter 17, 2275-2790, 2021. DOI: 10.1039/D0SM01992E
  • Orozco-Caballero, A.;Gutierrez, C.; Gan, B.; Molina-Aldareguia, J.M. - High-throughput nanoindentation mapping of cast IN718 nickel-based superalloys: influence of the Nb concentration. journal of materials research , 2021. DOI: 10.1557/s43578-021-00133-5
  • Zhang, M.; Zhang, H.; Ma, A.; Llorca, J. - Experimental and numerical analysis of cyclic deformation and fatigue behavior of a Mg-RE alloy. international journal of plasticity 139, 102885, 2021. DOI: 10.1016/j.ijplas.2020.102885
  • Cantón-Sánchez, R.; Romero, I. - Dimensionally reduced nonlinear solids with general loads and constitutive laws: Theory and finite element formulation for rod-like bodies. international journal of solids and structures 210-211, 273-288, 2021. DOI: 10.1016/j.ijsolstr.2020.11.024
  • Zhou, M.; Liu, Y.; Yao, D.; Jiang, Y.; Zhang, X.; Wang, D.-Y.; Wang, N. - Promotion of the flame retardancy of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide grafted natural rubber using expandable graphite. arabian journal of chemistry 14, 102980, 2021. DOI: 10.1016/j.arabjc.2020.102980
  • Maça, R.R.; Etacheri, V. - Effect of Vinylene Carbonate Electrolyte Additive on the Surface Chemistry and Pseudocapacitive Sodium-Ion Storage of TiO2 Nanosheet Anodes. batteries 7, 1, 2021. DOI: 10.3390/batteries7010001
  • Comesaña, R.; Boutinguiza, M.; Lusquiños , F.; Jones , J.R.; Pérez‐Prado, M.T.; Pou, J. - Laser-Guided Corrosion Control: A New Approach to Tailor the Degradation of Mg-Alloys. nano-micro small , 2021. DOI: 10.1002/smll.202100924
  • Cruzado, A.; Segurado, J.; Hartl, D.J.; Benzerga, A.A. - A variational fast Fourier transform method for phase-transforming materials. modelling and simulation in materials science and engineering 29, 045001, 2021. DOI: 10.1088/1361-651X/abe4c7
  • Santos, C.; Rodriguez, I,V.; Lado, J.J.; Vila, M.; Garcia-Quismondo, E. - Low-energy consumption, free-form capacitive deionization through nanostructured networks. carbon 176, 390-399, 2021. DOI: 10.1016/j.carbon.2021.01.148
  • Boehler, C.J.; Hernández-Escobar, D.; Ruiz-Palenzuela, B.; Sabirov, I.; Cornide, J.; Ruiz-Navas, E.M. - The effect of microstructure and strain rate on the 25 °C and 700 °C compression deformation behavior of powder metallurgy processed Ti-45Al-2Nb-2Mn (at.%)-0.8 TiB2 (vol%) alloy. materials characterization , 110856, 2021. DOI: 10.1016/j.matchar.2020.110856
  • Liu, Z.; Yuan, X.; Wang, S.; Liu, S.; Tan, H.H.; Jagadish, Ch. - Nanomechanical behavior of single taper-free GaAs nanowires unravelled by in-situ TEM mechanical testing and molecular dynamics simulation. materials science & engineering a 806, 140866, 2021. DOI: 10.1016/j.msea.2021.140866
  • Madrona, C.; Vila, M.; Oropeza, F.E.; de la Peña O’Shea, V.A.; Vilatela, J.J. - Macroscopic yarns of FeCl3-intercalated collapsed carbon nanotubes with high doping and stability. carbon 173, 311-321, 2021. DOI: 10.1016/j.carbon.2020.10.052
  • Guo, Y.; Zhou, M.; Yin, G._Z.: Kalali, E.; Wang, N.; Wang, D.-Y. - Basalt Fiber-Based Flame Retardant Epoxy Composites: Preparation, Thermal Properties, and Flame Retardancy. materials 14, 902, 2021. DOI: 10.3390/ma14040902
  • Chen, X.; Yusuf, A.; Sanchez del Rio, J.; Wang, D.-Y. - A facile and robust route to polyvinyl alcohol-based triboelectric nanogenerator containing flame-retardant polyelectrolyte with improved output performance and fire safety. nano energy 81, 105656, 2021. DOI: 10.1016/j.nanoen.2020.105656
  • Bellón, B.; Boukellal, A.K.; Isensee, T.; Wellborn, O.M.; Trumble, K.P.; Krane, M.J.M.; Titus, M.S.; Tourret, D.; Llorca, J. - Multiscale prediction of microstructure length scales in metallic alloy casting. acta materialia 207, 116686, 2021. DOI: 10.1016/j.actamat.2021.116686
  • Liu, Z.; Yuan, X.; Wang, S.; Liu, S.; Tan, H.H.; Jagadish, C. - Nanomechanical behavior of single taper-free GaAs nanowires unravelled by in-situ TEM mechanical testing and molecular dynamics simulation. materials science & engineering a 806, 140866, 2021. DOI: 10.1016/j.msea.2021.140866
  • Sanchez del Río, J.; Pascual-González, C.; Martínez, V.; Jiménez, J.L.; González, C. - 3D-printed resistive carbon-fiber-reinforced sensors for monitoring the resin frontal flow during composite manufacturing. sensors and actuators a: physical 317, 112422, 2021. DOI: 10.1016/j.sna.2020.112422
  • Jacobo-Martín, A.; Rueda, M.; Hernández, J.J.; Navarro-Baena, I. - Bioinspired antireflective flexible films with optimized mechanical resistance fabricated by roll to roll thermal nanoimprint. scientific reports 11, 2419, 2021. DOI: 10.1038/s41598-021-81560-6
  • Alizadeh, R.; Wang, J.; LLorca, J. - Precipitate strengthening of pyramidal slip in Mg-Zn alloys. materials science & engineering a Volume 804, 140697, 2021. DOI: 10.1016/j.msea.2020.140697
  • de Oliveira, P.C.; Montoro, L.A.; Perez-Prado, M.T.; Hohenwarter, A.; Figueiredo, R.B.; Isaac, A. - Development of segregations in a Mg-Mn-Nd alloy during HPT processing. materials science and engineering: a 802, 140423, 2021. DOI: 10.1016/j.msea.2020.140423
  • Karjule, N.; Rana, M.; Shalom, M.; Barrio, J.; Vilatela, J.J. - Controlled Nucleation and Growth of Carbon Nitride Films on CNT Fiber Fabric for Photoelectrochemical Applications. advanced sustainable systems , 2021. DOI: 10.1002/adsu.202000265
  • Chen, N.; Kou, H.; Wu, Z.; Qiang, F.; Wang, Ch.; Li, J.; Molina-Aldareguia, J. - Stress-induced α″ martensitic phase transformation and martensitic twinning in a metastable β titanium alloy. journal of alloys and compounds 859, 157809, 2021. DOI: 10.1016/j.jallcom.2020.157809
  • Tsipas, S. A.; Tabares, E.; Weissgaerber, T; Hutsch, T.; Sket, F.; Velasco, B. - Thermophysical properties of porous Ti2AlC and Ti3SiC2 produced by powder metallurgy. journal of alloys and compounds 857, 158145, 2021. DOI: 10.1016/j.jallcom.2020.158145