Publication

    2013

  • Hidalgo, J.; Fernandez-Blazquez, J. P.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M. - Effect of the particle size and solids volume fraction on the thermal degradation behaviour of Invar 36 feedstocks. polymer degradation and stability 98, 2546-2555, 2013. DOI: 10.1016/j.polymdegradstab.2013.09.015
  • Torralba, Jose M.; Navarro, Alfonso; Campos, Monica - From the TRIP effect and Quenching and Partitioning steels concepts to the development of new high-performance, lean powder metallurgy steels. materials science and engineering a-structural materials properties microstructure and processing 573, 253-256, 2013. DOI: 10.1016/j.msea.2013.02.034
  • Taleghani, M. A. Jabbari; Torralba, J. M. - The microstructural evolution of a pre-alloyed AZ91 magnesium alloy powder through high-energy milling and subsequent isothermal annealing. materials letters 98, 182-185, 2013. DOI: 10.1016/j.matlet.2013.02.052
  • Munoz-Moreno, Rocio; Teresa Perez-Prado, M.; Llorca, Javier; Maria Ruiz-Navas, Elisa; Boehlert, Carl J. - Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 1887-1896, 2013. DOI: 10.1007/s11661-012-1515-8
  • Ygnacio Pastor, Jose; Martin, Antonia; Molina-Aldareguia, Jon M.; LLorca, Javier; Oliete, Patricia B.; Larrea, Angel; Pena, Jose I.; Orera, Victor M.; Arenal, Raul - Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics. journal of the european ceramic society 33, 2579-2586, 2013. DOI: 10.1016/j.jeurceramsoc.2013.03.033
  • Darby, B. L.; Yates, B. R.; Martin-Bragado, I.; Gomez-Selles, J. L.; Elliman, R. G.; Jones, K. S. - Substrate orientation dependence on the solid phase epitaxial growth rate of Ge. journal of applied physics 113, 2013. DOI: 10.1063/1.4776718
  • Torrejon, Jacob; Infante, German; Badini-Confalonieri, Giovanni; Pirota, Kleber R.; Vazquez, Manuel - Electroplated Bimagnetic Microwires: From Processing to Magnetic Properties and Sensor Devices. jom 65, 890-900, 2013. DOI: 10.1007/s11837-013-0614-3
  • Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Rivallin, Pierrette; Tavernier, Clement; Cristoloveanu, Sorin; Martin-Bragado, Ignacio - An atomistic investigation of the impact of in-plane uniaxial stress during solid phase epitaxial regrowth. applied physics letters 102, 2013. DOI: 10.1063/1.4802203
  • Llorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Lopes, C. S. - Multiscale Modeling of Composites: Toward Virtual Testing … and Beyond. jom 65, 215-225, 2013. DOI: 10.1007/s11837-012-0509-8
  • Jabbari Taleghani, M. A.; Torralba, J. M. - Hot deformation behavior and workability characteristics of AZ91 magnesium alloy powder compacts-A study using processing map. materials science and engineering a-structural materials properties microstructure and processing 580, 142-149, 2013. DOI: 10.1016/j.msea.2013.04.071
  • Li, Cheng; Fan, Hong; Wang, De-Yi; Hu, Jijiang; Wan, Jintao; Li, Bogeng - Novel silicon-modified phenolic novolacs and their biofiber-reinforced composites: Preparation, characterization and performance. composites science and technology 87, 189-195, 2013. DOI: 10.1016/j.compscitech.2013.08.016
  • Moreno-Valle, E. C.; Monclus, M. A.; Molina-Aldareguia, J. M.; Enikeev, N.; Sabirov, I. - Biaxial Deformation Behavior and Enhanced Formability of Ultrafine-Grained Pure Copper. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 2399-2408, 2013. DOI: 10.1007/s11661-012-1576-8
  • Peron-Luhrs, V.; Jerusalem, A.; Sansoz, F.; Stainier, L.; Noels, L. - A two-scale model predicting the mechanical behavior of nanocrystalline solids. journal of the mechanics and physics of solids 61, 1895-1914, 2013. DOI: 10.1016/j.jmps.2013.04.009
  • Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J. - Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization. composite structures 95, 569-576, 2013. DOI: 10.1016/j.compstruct.2012.07.005
  • Biswas, Somjeet; Sket, Federico; Chiumenti, Michele; Gutierrez-Urrutia, Ivan; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria - Relationship Between the 3D Porosity and beta-Phase Distributions and the Mechanical Properties of a High Pressure Die Cast AZ91 Mg Alloy. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 4391-4403, 2013. DOI: 10.1007/s11661-013-1783-y
  • Boehlert, C. J.; Chen, Z.; Chakkedath, A.; Gutierrez-Urrutia, I.; Llorca, J.; Bohlen, J.; Yi, S.; Letzig, D.; Perez-Prado, M. T. - In situ analysis of the tensile deformation mechanisms in extruded Mg-1Mn-1Nd (wt%). philosophical magazine 93, 598-617, 2013. DOI: 10.1080/14786435.2012.725954
  • Moreno-Valle, E. C.; Pachla, W.; Kulczyk, M.; Savoini, B.; Monge, M. A.; Ballesteros, C.; Sabirov, I. - Anisotropy of uni-axial and bi-axial deformation behavior of pure Titanium after hydrostatic extrusion. materials science and engineering a-structural materials properties microstructure and processing 588, 7-13, 2013. DOI: 10.1016/j.msea.2013.08.044
  • Hidalgo, J.; Abajo, C.; Jimenez-Morales, A.; Torralba, J. M. - Effect of a binder system on the low-pressure powder injection moulding of water-soluble zircon feedstocks. journal of the european ceramic society 33, 3185-3194, 2013. DOI: 10.1016/j.jeurceramsoc.2013.06.027
  • Rahimian, Mehdi; Milenkovic, Srdjan; Sabirov, Ilchat - Microstructure and hardness evolution in MAR-M247 Ni-based superalloy processed by controlled cooling and double heat treatment. journal of alloys and compounds 550, 339-344, 2013. DOI: 10.1016/j.jallcom.2012.10.129
  • Chang, H-J; Segurado, J.; Rodriguez de la Fuente, O.; Pabon, B. M.; Lorca, J. L. - Molecular dynamics modeling and simulation of void growth in two dimensions. modelling and simulation in materials science and engineering 21, 2013. DOI: 10.1088/0965-0393/21/7/075010
  • Bardella, Lorenzo; Segurado, Javier; Panteghini, Andrea; Llorca, Javier - Latent hardening size effect in small-scale plasticity. modelling and simulation in materials science and engineering 21, 2013. DOI: 10.1088/0965-0393/21/5/055009
  • Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N. - Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation. journal of electronic materials 42, 1085-1091, 2013. DOI: 10.1007/s11664-013-2517-z
  • Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T. - Effect of Nd Additions on Extrusion Texture Development and on Slip Activity in a Mg-Mn Alloy. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 4819-4829, 2013. DOI: 10.1007/s11661-013-1823-7
  • Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J. - Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of ply clustering. composite structures 106, 96-103, 2013. DOI: 10.1016/j.compstruct.2013.05.052
  • Agoras, M.; Ponte Castaneda, P. - Iterated linear comparison bounds for viscoplastic porous materials with ellipsoidal microstructures. journal of the mechanics and physics of solids 61, 701-725, 2013. DOI: 10.1016/j.jmps.2012.11.003
  • Segurado, Javier; Llorca, Javier - Simulation of the deformation of polycrystalline nanostructured Ti by computational homogenization. computational materials science 76, 3-11, 2013. DOI: 10.1016/j.commatsci.2013.03.008
  • Mas, Bartolome; Fernandez-Blazquez, Juan P.; Duval, Jonathan; Bunyan, Humphrey; Vilatela, Juan J. - Thermoset curing through Joule heating of nanocarbons for composite manufacture, repair and soldering. carbon 63, 523-529, 2013. DOI: 10.1016/j.carbon.2013.07.029
  • Dudamell, N. V.; Hidalgo-Manrique, P.; Chakkedath, A.; Chen, Z.; Boehlert, C. J.; Galvez, E.; Yi, S.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T. - Influence of strain rate on the twin and slip activity of a magnesium alloy containing neodymium. materials science and engineering a-structural materials properties microstructure and processing 583, 220-231, 2013. DOI: 10.1016/j.msea.2013.07.003
  • Monclus, M. A.; Zheng, S. J.; Mayeur, J. R.; Beyerlein, I. J.; Mara, N. A.; Polcar, T.; Llorca, J.; Molina-Aldareguia, J. M. - Optimum high temperature strength of two-dimensional nanocomposites. apl materials 1, 2013. DOI: 10.1063/1.4828757
  • Srinivasarao, B.; Zhilyaev, A. P.; Langdon, T. G.; Perez-Prado, M. T. - On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion. materials science and engineering a-structural materials properties microstructure and processing 562, 196-202, 2013. DOI: 10.1016/j.msea.2012.11.027
  • Cui, Y. -W.; Xu, Guanglong; Kato, R.; Lu, Xiao-Gang; Kainuma, R.; Ishida, K. - Interdiffusion and Atomic Mobility for Face-Centered Cubic (FCC) Co-W Alloys. metallurgical and materials transactions a-physical metallurgy and materials science 44A, 1621-1625, 2013. DOI: 10.1007/s11661-012-1586-6
  • Kang, Nian-Jun; Wang, De-Yi - A green functional nanohybrid: preparation, characterization and properties of a beta-cyclodextrin based functional layered double hydroxide. journal of materials chemistry a 1, 11376-11383, 2013. DOI: 10.1039/c3ta12304a
  • Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Maimi, P.; Costa, J. - Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies. composite structures 101, 255-264, 2013. DOI: 10.1016/j.compstruct.2013.01.026
  • Sepulveda, A. T.; Guzman de Villoria, R.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Rocha, L. A. - Full elastic constitutive relation of non-isotropic aligned-CNT/PDMS flexible nanocomposites. nanoscale 5, 4847-4854, 2013. DOI: 10.1039/c3nr00753g
  • Murashkin, M. Yu; Sabirov, I.; Kazykhanov, V. U.; Bobruk, E. V.; Dubravina, A. A.; Valiev, R. Z. - Enhanced mechanical properties and electrical conductivity in ultrafine-grained Al alloy processed via ECAP-PC. journal of materials science 48, 4501-4509, 2013. DOI: 10.1007/s10853-013-7279-8
  • Seltzer, R.; Gonzalez, C.; Munoz, R.; LLorca, J.; Blanco-Varela, T. - X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact. composites part a-applied science and manufacturing 45, 49-60, 2013. DOI: 10.1016/j.compositesa.2012.09.017
  • Hernandez, S.; Sket, F.; Gonzalez, C.; LLorca, J. - Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties. composites science and technology 85, 73-82, 2013. DOI: 10.1016/j.compscitech.2013.06.005
  • Martin-Bragado, Ignacio; Rivera, Antonio; Valles, Gonzalo; Luis Gomez-Selles, Jose; Caturla, Maria J. - MMonCa: An Object Kinetic Monte Carlo simulator for damage irradiation evolution and defect diffusion. computer physics communications 184, 2703-2710, 2013. DOI: 10.1016/j.cpc.2013.07.011
  • Wu, L.; Tjahjanto, D.; Becker, G.; Makradi, A.; Jerusalem, A.; Noels, L. - A micro-meso-model of intra-laminar fracture in fiber-reinforced composites based on a discontinuous Galerkin/cohesive zone method. engineering fracture mechanics 104, 162-183, 2013. DOI: 10.1016/j.engfracmech.2013.03.018
  • Shabanian, Meisam; Kang, Nian-Jun; Wang, De-Yi; Wagenknecht, Udo; Heinrich, Gert - Synthesis of aromatic-aliphatic polyamide acting as adjuvant in polylactic acid (PLA)/ammonium polyphosphate (APP) system. polymer degradation and stability 98, 1036-1042, 2013. DOI: 10.1016/j.polymdegradstab.2013.02.007
  • Kang, Nian-Jun; Wang, De-Yi; Kutlu, Burak; Zhao, Peng-Cheng; Leuteritz, Andreas; Wagenknecht, Udo; Heinrich, Gert - A New Approach to Reducing the Flammability of Layered Double Hydroxide (LDH)-Based Polymer Composites: Preparation and Characterization of Dye Structure-Intercalated LDH and Its Effect on the Flammability of Polypropylene-Grafted Maleic Anhydride/d-LDH Composites. acs applied materials & interfaces 5, 8991-8997, 2013. DOI: 10.1021/am4020555
  • Fernandez, A.; Jerusalem, A.; Gutierrez-Urrutia, I.; Perez-Prado, M. T. - Three-dimensional investigation of grain boundary-twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling. acta materialia 61, 7679-7692, 2013. DOI: 10.1016/j.actamat.2013.09.005
  • Lotfian, S.; Rodriguez, M.; Yazzie, K. E.; Chawla, N.; Llorca, J.; Molina-Aldareguia, J. M. - High temperature micropillar compression of Al/SiC nanolaminates. acta materialia 61, 4439-4451, 2013. DOI: 10.1016/j.actamat.2013.04.013
  • Sabirov, I.; Murashkin, M. Yu; Valiev, R. Z. - Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development. materials science and engineering a-structural materials properties microstructure and processing 560, 1-24, 2013. DOI: 10.1016/j.msea.2012.09.020
  • 2012

  • Tang, Bin; Kou, Hongchao; Cui, Y. -W.; Chang, Hui; Li, Jinshan; Zhou, Lian - The Incorporation of omega Particles during Growing or Coarsening Process in Metastable beta Titanium Alloy. ti-2011: proceedings of the 12th world conference on titanium, vol i , 597-600, 2012. DOI:
  • Feng, Liang; Huang, Lei; Chang, Hui; Cui, Yu-wen; Li, Jin-shan - Interdiffusion Study and Assessment of Mobility for Ti-Mo Alloys. ti-2011: proceedings of the 12th world conference on titanium, vol i , 653-657, 2012. DOI:
  • Fasce, L. A.; Seltzer, R.; Frontini, P. M. - Depth sensing indentation of organic-inorganic hybrid coatings deposited onto a polymeric substrate. surface & coatings technology 210, 62-70, 2012. DOI: 10.1016/j.surfcoat.2012.08.064
  • Bornert, M.; Brenner, R.; Castelnau, O.; Ponte Castaneda, P.; Suquet, P. - A special issue of Comptes Rendus Mecanique in honor of Andre Zaoui Preface. comptes rendus mecanique 340, 179-180, 2012. DOI:
  • Chen, Z.; Boehlert, C.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T. - TENSILE AND CREEP DEFORMATION MECHANISMS IN ROLLED AZ31. magnesium technology 2012 , 99-104, 2012. DOI: 10.1007/978-3-319-48203-3_19
  • Moroz, Victor; Huang, Joanne; Letay, Gergoe; Martin-Bragado, Ignacio - Modeling and Optimization of Solar Cells. ion implantation technology 2012 1496, 201-205, 2012. DOI: 10.1063/1.4766524
  • Ulacia, I.; Dudamell, N. V.; Esnaola, J. A.; Yi, S. B.; Perez-Prado, M. T.; Galvez, F.; Letzig, D.; Hurtado, I. - Evolution of texture and microstructure of AZ31 Mg alloy sheet at high strain rates. thermec 2011, pts 1-4 706-709, 1255-1260, 2012. DOI: 10.4028/www.scientific.net/MSF.706-709.1255
  • Danas, Kostas; Ponte Castaneda, Pedro - Comment on Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials by K. Danas and P. Ponte Castaneda Response. international journal of solids and structures 49, 3486-3486, 2012. DOI: 10.1016/j.ijsolstr.2012.07.010
  • Dudamell, N. V.; Galvez, F.; Perez-Prado, M. T. - Dynamic deformation of high pressure die-cast magnesium alloys. revista de metalurgia 48, 351-357, 2012. DOI: 10.3989/revmetalm.1201
  • Tang, Bin; Cui, Y. -W.; Chang, Hui; Kou, Hongchao; Li, Jinshan; Zhou, Lian - Modeling of Incommensurate omega Structure in the Zr-Nb Alloys. metallurgical and materials transactions a-physical metallurgy and materials science 43A, 2581-2586, 2012. DOI: 10.1007/s11661-012-1214-5
  • Seltzer, R.; Segurado Escudero, J.; de la Escalera Cutillas, F. Martin - Influence of hygrothermal aging on the mechanical properties of Nylon 12 composites processed by selective laser sintering. innovative developments on virtual and physical prototyping , 287-289, 2012. DOI:
  • Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - DAMAGE LOCALIZATION AND FAILURE LOCUS UNDER BIAXIAL LOADING IN GLASS-FIBER NONWOVEN FELTS. international journal for multiscale computational engineering 10, 425-440, 2012. DOI: 10.1615/IntJMultCompEng.2012002922
  • Agoras, M.; Ponte Castaneda, P. - Multi-scale homogenization-based modeling of semi-crystalline polymers. philosophical magazine 92, 925-958, 2012. DOI: 10.1080/14786435.2011.637982
  • Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier - Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation. comptes rendus mecanique 340, 307-319, 2012. DOI: 10.1016/j.crme.2012.02.013
  • Chen, Ying; Milenkovic, Srdjan; Hassel, Achim Walter - Thermal stability of {110} facet terminated gold nanobelts. applied surface science 258, 6224-6231, 2012. DOI: 10.1016/j.apsusc.2012.02.144
  • Lebensohn, Ricardo A.; Idiart, Martin I.; Ponte Castaneda, Pedro - Modeling microstructural effects in dilatational plasticity of polycrystalline materials. iutam symposium on linking scales in computations: from microstructure to macro-scale properties 3, 314-330, 2012. DOI: 10.1016/j.piutam.2012.03.020
  • Lorenzo-Villafranca, Eduardo; Tamargo-Martinez, Katia; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Martinez-Alonso, Amelia; Tascon, Juan M. D.; Gracia, Mercedes; Llorca, Javier - Influence of Plasma Surface Treatments on Kink Band Formation in PBO Fibers During Compression. journal of applied polymer science 123, 2052-2063, 2012. DOI: 10.1002/app.34568
  • Lopez-Pamies, Oscar; Ponte Castaneda, Pedro; Idiart, Martin I. - Effects of internal pore pressure on closed-cell elastomeric foams. international journal of solids and structures 49, 2793-2798, 2012. DOI: 10.1016/j.ijsolstr.2012.02.024
  • Christou, George A.; Young, Laurence R.; Goel, Rahul; Vechart, Andrew P.; Jerusalem, Antoine - Shock attenuation of PMMA sandwich panels filled with soda-lime glass beads: A fluid-structure interaction continuum model simulation. international journal of impact engineering 47, 48-59, 2012. DOI: 10.1016/j.ijimpeng.2012.03.003
  • Zographos, Nikolas; Zechner, Christoph; Castrillo, Pedro; Martin-Bragado, Ignacio - Process Modeling of Chemical and Stress Effects in SiGe. ion implantation technology 2012 1496, 212-216, 2012. DOI: 10.1063/1.4766526
  • Tang, Bin; Cui, Y. -W.; Kou, Hongchao; Chang, Hui; Li, Jinshan; Zhou, Lian - Phase field modeling of isothermal beta -> omega phase transformation in the Zr-Nb alloys. computational materials science 61, 76-82, 2012. DOI: 10.1016/j.commatsci.2012.04.007
  • Munoz-Moreno, Rocio; Boehlert, Carl J.; Teresa Perez-Prado, M.; Ruiz-Navas, Elisa M.; Llorca, Javier - In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn+0.8 vol pct TiB2. metallurgical and materials transactions a-physical metallurgy and materials science 43A, 1198-1208, 2012. DOI: 10.1007/s11661-011-1022-3
  • Wong, C. S.; Bennett, N. S.; Galiana, B.; Tejedor, P.; Benedicto, M.; Molina-Aldareguia, J. M.; McNally, P. J. - Structural investigation of MOVPE-grown GaAs on Ge by x-ray techniques. semiconductor science and technology 27, 2012. DOI: 10.1088/0268-1242/27/11/115012
  • Sepulveda, A. T.; Guzman de Villoria, R.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Rocha, L. A. - Flexible Pressure Sensors: Modeling and Experimental Characterization. 26th european conference on solid-state transducers, eurosensor 2012 47, 1177-1180, 2012. DOI: 10.1016/j.proeng.2012.09.361
  • Siboni, M. H.; Ponte Castaneda, Pedro - A magnetically anisotropic, ellipsoidal inclusion subjected to a non-aligned magnetic field in an elastic medium. comptes rendus mecanique 340, 205-218, 2012. DOI: 10.1016/j.crme.2012.02.003
  • Jose Vilatela, Juan; Windle, Alan H. - A Multifunctional Yarn Made Of Carbon Nanotubes. journal of engineered fibers and fabrics 7, 23-28, 2012. DOI: 10.1177/155892501200702S04
  • Martin-Bragado, Ignacio - Importance of twin defect formation created by solid-phase epitaxial growth: An atomistic study. scripta materialia 66, 186-189, 2012. DOI: 10.1016/j.scriptamat.2011.10.036
  • Tang, Bin; Cui, Y. -W.; Chang, Hui; Kou, Hongchao; Li, Jinshan; Zhou, Lian - A phase-field approach to athermal beta -> omega transformation. computational materials science 53, 187-193, 2012. DOI: 10.1016/j.commatsci.2011.09.011
  • Jerusalem, Antoine; Fernandez, Ana; Kunz, Allison; Greer, Julia R. - Continuum modeling of dislocation starvation and subsequent nucleation in nano-pillar compressions. scripta materialia 66, 93-96, 2012. DOI: 10.1016/j.scriptamat.2011.10.009
  • Martin-Bragado, Ignacio; Sklenard, Benoit - Understanding Si(111) solid phase epitaxial regrowth using Monte Carlo modeling: Bi-modal growth, defect formation, and interface topology. journal of applied physics 112, 2012. DOI: 10.1063/1.4739733
  • Ponte Castaneda, P. - Bounds for nonlinear composites via iterated homogenization. journal of the mechanics and physics of solids 60, 1583-1604, 2012. DOI: 10.1016/j.jmps.2012.05.004
  • Edwards, D.; Sabirov, I.; Sigle, W.; Pippan, R. - Microstructure and thermostability of a W-Cu nanocomposite produced via high-pressure torsion. philosophical magazine 92, 4151-4166, 2012. DOI: 10.1080/14786435.2012.704426
  • Seltzer, Rocio; Mai, Yiu-Wing; Frontini, Patricia M. - Creep behaviour of injection moulded polyamide 6/organoclay nanocomposites by nanoindentation and cantilever-bending. composites part b-engineering 43, 83-89, 2012. DOI: 10.1016/j.compositesb.2011.04.035
  • Oro, R.; Campos, M.; Torralba, J. M.; Capdevila, C. - Lean alloys in PM: from design to sintering performance. powder metallurgy 55, 294-301, 2012. DOI: 10.1179/1743290112Y.0000000016
  • Soler, Rafael; Mikel Molina-Aldareguia, Jon; Segurado, Javier; LLorca, Javier - Effect of Misorientation on the Compression of Highly Anisotropic Single-Crystal Micropillars. advanced engineering materials 14, 1004-1008, 2012. DOI: 10.1002/adem.201200019
  • Jerusalem, Antoine; Dao, Ming - Continuum modeling of a neuronal cell under blast loading. acta biomaterialia 8, 3360-3371, 2012. DOI: 10.1016/j.actbio.2012.04.039
  • Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N. - High-temperature nanoindentation behavior of Al/SiC multilayers. philosophical magazine letters 92, 362-367, 2012. DOI: 10.1080/09500839.2012.674220
  • Yue, H. -B.; Cui, Y. -D.; Shuttleworth, P. S.; Clark, James H. - Preparation and characterisation of bioplastics made from cottonseed protein. green chemistry 14, 2009-2016, 2012. DOI: 10.1039/c2gc35509d
  • Lachman, Noa; Wiesel, Erica; Guzman de Villoria, Roberto; Wardle, Brian L.; Wagner, H. Daniel - Interfacial load transfer in carbon nanotube/ceramic microfiber hybrid polymer composites. composites science and technology 72, 1416-1422, 2012. DOI: 10.1016/j.compscitech.2012.05.015
  • Gao, Tong; Hu, Howard H.; Ponte Castaneda, Pedro - Shape Dynamics and Rheology of Soft Elastic Particles in a Shear Flow. physical review letters 108, 2012. DOI: 10.1103/PhysRevLett.108.058302
  • Milenkovic, Srdjan; Sabirov, Ilchat; LLorca, Javier - Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy. materials letters 73, 216-219, 2012. DOI: 10.1016/j.matlet.2012.01.028
  • Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M. - Torque rheology of zircon feedstocks for powder injection moulding. journal of the european ceramic society 32, 4063-4072, 2012. DOI: 10.1016/j.jeurceramsoc.2012.06.023
  • Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - A constitutive model for the in-plane mechanical behavior of nonwoven fabrics. international journal of solids and structures 49, 2215-2229, 2012. DOI: 10.1016/j.ijsolstr.2012.04.014
  • Wang, De-Yi; Gohs, Uwe; Kang, Nian-Jun; Leuteritz, Andreas; Boldt, Regine; Wagenknecht, Udo; Heinrich, Gert - Method for Simultaneousiy Improving the Thermal Stability and Mechanical Properties of Poly(lactic acid): Effect of High-Energy Electrons on the Morphological, Mechanical, and Thermal Properties of PLA/MMT Nanocomposites. langmuir 28, 12601-12608, 2012. DOI: 10.1021/la3025099
  • Sebaey, T. A.; Blanco, N.; Costa, J.; Lopes, C. S. - Characterization of crack propagation in mode I delamination of multidirectional CFRP laminates. composites science and technology 72, 1251-1256, 2012. DOI: 10.1016/j.compscitech.2012.04.011
  • Dudamell, N. V.; Ulacia, I.; Galvez, F.; Yi, S.; Bohlen, J.; Letzig, D.; Hurtado, I.; Perez-Prado, M. T. - Influence of texture on the recrystallization mechanisms in an AZ31 Mg sheet alloy at dynamic rates. materials science and engineering a-structural materials properties microstructure and processing 532, 528-535, 2012. DOI: 10.1016/j.msea.2011.11.018
  • Sket, F.; Seltzer, R.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography. composites science and technology 72, 350-359, 2012. DOI: 10.1016/j.compscitech.2011.11.025
  • Williams, J. J.; Segurado, J.; LLorca, J.; Chawla, N. - Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites. materials science and engineering a-structural materials properties microstructure and processing 557, 113-118, 2012. DOI: 10.1016/j.msea.2012.05.108
  • Frontan, Jaime; Zhang, Yuming; Dao, Ming; Lu, Jian; Galvez, Francisco; Jerusalem, Antoine - Ballistic performance of nanocrystalline and nanotwinned ultrafine crystal steel. acta materialia 60, 1353-1367, 2012. DOI: 10.1016/j.actamat.2011.11.029
  • Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Determination of the mechanical properties of amorphous materials through instrumented nanoindentation. acta materialia 60, 3953-3964, 2012. DOI: 10.1016/j.actamat.2012.03.027
  • Galipeau, Evan; Ponte Castaneda, Pedro - The effect of particle shape and distribution on the macroscopic behavior of magnetoelastic composites. international journal of solids and structures 49, 1-17, 2012. DOI: 10.1016/j.ijsolstr.2011.08.014
  • Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - A methodology to measure the interface shear strength by means of the fiber push-in test. composites science and technology 72, 1924-1932, 2012. DOI: 10.1016/j.compscitech.2012.08.011
  • Canal, L. P.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; LLorca, J. - Application of digital image correlation at the microscale in fiber-reinforced composites. composites part a-applied science and manufacturing 43, 1630-1638, 2012. DOI: 10.1016/j.compositesa.2011.07.014
  • Dasari, Aravind; Quiros, Jennifer; Herrero, Berta; Boltes, Karina; Garcia-Calvo, Eloy; Rosal, Roberto - Antifouling membranes prepared by electrospinning polylactic acid containing biocidal nanoparticles. journal of membrane science 405, 134-140, 2012. DOI: 10.1016/j.memsci.2012.02.060
  • Pablo Canal, Luis; Gonzalez, Carlos; Segurado, Javier; LLorca, Javier - Intraply fracture of fiber-reinforced composites: Microscopic mechanisms and modeling. composites science and technology 72, 1223-1232, 2012. DOI: 10.1016/j.compscitech.2012.04.008
  • Castaneda, P. Ponte; Siboni, M. N. - A finite-strain constitutive theory for electro-active polymer composites via homogenization. international journal of non-linear mechanics 47, 293-306, 2012. DOI: 10.1016/j.ijnonlinmec.2011.06.012