
José Manuel Torralba, IMDEA MATERIALS
At 280 km/h, a Formula 1 driver experiences accelerations that can exceed several times the force of gravity, comparable to those endured by astronauts during a rocket launch. At such speeds, a crash should be unsurvivable. Yet accidents do happen in Formula 1, and drivers often walk away from them, as Robert Kubica did at the 2007 Canadian Grand Prix.
After leaving the track at around 280 km/h, Kubica’s car was completely destroyed, with the exception of the cockpit, the protective cell surrounding the driver. He climbed out of what had become little more than scrap metal and thanked Pope John Paul II for saving his life: “It was John Paul II. He saved me.” Kubica did not mention the cutting-edge technology and advanced materials that had turned the cockpit into a shield any Viking warrior would have envied.
The Cockpit as a Lifesaving Shield
Kubica survived thanks largely to composite materials, especially carbon-carbon composites, which are the primary materials used to manufacture Formula 1 chassis. McLaren was among the pioneers in adopting this technology.
Carbon fiber is an exceptionally lightweight material that, on its own, can achieve mechanical strengths comparable to those of high-grade steel. Embedded within a carbon matrix, however, the fibers can absorb far more energy before failure occurs.
A carbon-fiber composite can have a tensile strength three times greater than that of a quality steel (3.5 GPa versus 1.3 GPa), while being approximately six times less dense (1.75 g/cm³ compared to 7.9 g/cm³). This provides a specific strength of around 2 GPa, compared with only 0.17 GPa for steel.
In composite materials, a network of fibers is embedded within a surrounding matrix. This architecture hinders crack propagation, allowing the material to absorb enormous amounts of energy before ultimately fracturing.
The Strongest Synthetic Fiber
New aramid fibers such as Zylon (also used in products like bulletproof vests) are sometimes employed in place of carbon fiber. These advanced materials provide even greater energy-absorption capability.
Fernando Alonso escaped a potentially fatal accident at the Australian Grand Prix after crashing at 310 km/h. His survival was aided by Zylon, a material stronger than steel that helped prevent disaster at Albert Park’s Turn 3. Although it breaks down during impact, Zylon is capable of absorbing tremendous amounts of energy and is considered the strongest synthetic fiber currently produced in laboratories.
The Brakes: A Technological Marvel
During Formula 1 broadcasts, commentators frequently emphasize brake temperatures. If the brakes are not operating within their optimal temperature window, performance suffers dramatically.This behavior is governed by principles from the scientific discipline known as tribology, the study of friction, wear, and lubrication.
A braking system consists of one material sliding against another, generating friction and converting kinetic energy into heat. This is known as a tribological system, in which the materials involved, temperature, humidity, and contact conditions all play critical roles. A difference of only a few degrees can determine whether a brake pad lasts mere seconds or several minutes. Brake degradation rates can also vary significantly according to environmental conditions.
Materials science is therefore fundamental to predicting and optimizing the survival of brake components operating under Formula 1’s extreme conditions, where drivers routinely experience accelerations and decelerations of up to 5G. Formula 1 brake discs are typically made from carbon-carbon composites, much like those used in aviation brakes. Introduced in the 1980s by the Brabham team, these materials remain central to modern brake technology.
Races can be won or lost because of brake wear.
Tyres and Tribology
The tyre-track interface is another tribological system. Tyre wear, which is directly linked to grip, depends not only on the materials used in the tyre but also on temperature and environmental conditions.
Poor tyre selection has been responsible for numerous Formula 1 disasters, with consequences that are never positive. Once again, composite structures dominate. Modern racing tyres combine different rubber compounds reinforced with steel belts. The hardness of the base rubber largely determines tyre behaviour and, consequently, the vehicle’s grip on the track.
Ignoring factors such as track hardness, temperature, or humidity when selecting tyres can lead to accelerated wear and a complete loss of grip, ultimately resulting in lost positions during a race.
Aluminium, Titanium and Steel in the Engine
A Formula 1 engine contains metals from multiple families: aluminium in the engine block, titanium in pistons, and steel in the crankshaft.
Titanium is rarely found in conventional road-car engines, except in some high-end performance vehicles, due to its cost and the potential corrosion issues it can create. Because titanium is a highly noble metal, it can act as a cathode when in contact with steel or aluminium, accelerating the degradation of those materials.
The relatively short lifespan of a Formula 1 engine means that reliability and performance often outweigh concerns related to long-term corrosion. In the quest to minimise weight, engineers may also use magnesium alloys, which are even lighter than aluminium. Conversely, dense materials such as tungsten may be employed as counterweights to help satisfy weight-distribution regulations.
Engine components may also incorporate ceramic coatings to optimize performance. Ceramics can withstand higher operating temperatures and enable more efficient thermal cycles. A Formula 1 engine is essentially a materials testing laboratory, where one material continually replaces another according to its fatigue resistance, operating temperature, reliability and overall performance. The innovations developed there eventually find their way into production vehicles.
When an engine fails and a replacement component is required, modern materials technologies allow even highly complex parts to be manufactured within hours thanks to additive manufacturing, or metal 3D printing. Once again, advances made in the materials laboratory are transferred to wider industry.
Sustainability and Safety: Formula 1’s Driving Forces
If we consider the main forces shaping Formula 1 vehicle development today, they are undoubtedly sustainability and safety. Engineers strive to build cars that are lighter and more efficient while maintaining or improving performance, without ever compromising driver protection.
We have already seen how advanced materials improve the safety of chassis structures, helping protect drivers during high-speed collisions. Equally important are the advances in fire-resistant materials, which can prevent flames from reaching a driver’s skin for critical seconds in the event of a fire.
Formula 1 cars operate at the very limits of technology thanks to the materials from which they are built. They are fast, sustainable and safe, showcasing how advances in materials science continue to push the boundaries of what is possible.
José Manuel Torralba, Full Professor, Carlos III University of Madrid and Senior Scientist, IMDEA MATERIALS
This article was originally published in The Conversation. Read the original.