Ponte Castaneda, P.
Menu
Microstructure and thermostability of a W-Cu nanocomposite produced via high-pressure torsion
Edwards, D.; Sabirov, I.; Sigle, W.; Pippan, R.
Microtomographic investigation of damage in E911 steel after long term creep
Sket, F.; Dzieciol, K.; Borbely, A.; Kaysser-Pyzalla, A. R.; Maile, K.; Scheck, R.
Fire response of polyamide 6 with layered and fibrillar nanofillers
Cai, Guipeng; Dasari, Aravind; Yu, Zhong-Zhen; Du, Xusheng; Dai, Shaocong; Mai, Yiu-Wing; Wang, Jiyang
Structural composites for multifunctional applications: Current challenges and future trends
Gonzalez, C.; Vilatela, J. J.; Molina-Aldareguia, J. M.; Lopes, C. S.; LLorca, J.
Interfacial crystallization of isotactic polypropylene surrounding macroscopic carbon nanotube and graphene fibers
Abdou, John P.; Reynolds, Karina J.; Pfau, Michaela R.; van Staden, Justin; Braggin, Gregory A.; Tajaddod, Navid; Minus, Marilyn; Reguero, Victor; Vilatela, Juan J.; Zhang, Shanju
Temperature and stain rate effect on the deformation of nanostructured pure titanium
Rodriguez-Galan, D.; Sabirov, I.; Segurado, J.
Comparative study of the synergistic effect of binary and ternary LDH with intumescent flame retardant on the properties of polypropylene composites
Wang, Xin; Spoerer, Yvonne; Leuteritz, Andreas; Kuehnert, Ines; Wagenknecht, Udo; Heinrich, Gert; Wang, De-Yi
Bio-based nickel alginate and copper alginate films with excellent flame retardancy: preparation, flammability and thermal degradation behavior
Liu, Yun; Zhao, Jin-Chao; Zhang, Chuan-Jie; Guo, Yi; Cui, Li; Zhu, Ping; Wang, De-Yi
Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates
Lotfian, S.; Mayer, C.; Chawla, N.; Llorca, J.; Misra, A.; Baldwin, J. K.; Molina-Aldareguia, J. M.
Anisotropy of uni-axial and bi-axial deformation behavior of pure Titanium after hydrostatic extrusion
Moreno-Valle, E. C.; Pachla, W.; Kulczyk, M.; Savoini, B.; Monge, M. A.; Ballesteros, C.; Sabirov, I.
Effect of a binder system on the low-pressure powder injection moulding of water-soluble zircon feedstocks
Hidalgo, J.; Abajo, C.; Jimenez-Morales, A.; Torralba, J. M.
Microstructure and hardness evolution in MAR-M247 Ni-based superalloy processed by controlled cooling and double heat treatment
Rahimian, Mehdi; Milenkovic, Srdjan; Sabirov, Ilchat
Texture evolution and dynamic recrystallization in a beta titanium alloy during hot-rolling process
Chen, Yi; Li, Jinshan; Tang, Bin; Kou, Hongchao; Xue, Xiangyi; Cui, Yuwen
Understanding size effects on the strength of single crystals through high-temperature micropillar compression
Soler, Rafael; Wheeler, Jeffrey M.; Chang, Hyung-Jun; Segurado, Javier; Michler, Johann; Llorca, Javier; Molina-Aldareguia, Jon M.
Bio-based semi-aromatic polyamide/functional clay nanocomposites: preparation and properties
Shabanian, Meisam; Kang, Nianjun; Liu, Jianwen; Wagenknecht, Udo; Heinrich, Gert; Wang, De-Yi
Latent hardening size effect in small-scale plasticity
Bardella, Lorenzo; Segurado, Javier; Panteghini, Andrea; Llorca, Javier
Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation
Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N.
Lean alloys in PM: from design to sintering performance
Oro, R.; Campos, M.; Torralba, J. M.; Capdevila, C.
Effect of Cu-doped graphene on the flammability and thermal properties of epoxy composites
Liu, Yun; Babu, Heeralal Vignesh; Zhao, Jianqing; Goni-Urtiaga, Asier; Sainz, Raquel; Ferritto, Rafael; Pita, Marcos; Wang, De-Yi
Thermal oxidative degradation kinetics of novel intumescent flame-retardant polypropylene composites
Nie, Shibin; Zhou, Can; Peng, Chao; Liu, Lei; Zhang, Chi; Dong, Xiang; Wang, De-yi
Transverse cracking of cross-ply laminates: A computational micromechanics perspective
Herraez, Miguel; Mora, Diego; Naya, Fernando; Lopes, Claudio S.; Gonzalez, Carlos; LLorca, Javier
Microstructure and mechanical properties of physical vapor deposited Cu/W nanoscale multilayers: Influence of layer thickness and temperature
Monclus, M. A.; Karlik, M.; Callisti, M.; Frutos, E.; LLorca, J.; Polcar, T.; Molina-Aldareguia, J. M.
Creep behaviour of injection moulded polyamide 6/organoclay nanocomposites by nanoindentation and cantilever-bending
Seltzer, Rocio; Mai, Yiu-Wing; Frontini, Patricia M.
Hierarchical TiO2 nanofibres as photocatalyst for CO2 reduction: Influence of morphology and phase composition on catalytic activity
Renones, Patricia; Moya, Alicia; Fresno, Fernando; Collado, Laura; Vilatela, Juan J.; de la Pena O'Shea, Victor A.
Deformation and energy dissipation mechanisms of needle-punched nonwoven fabrics: A multiscale experimental analysis
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Effect of Nd Additions on Extrusion Texture Development and on Slip Activity in a Mg-Mn Alloy
Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T.
Effect of Misorientation on the Compression of Highly Anisotropic Single-Crystal Micropillars
Soler, Rafael; Mikel Molina-Aldareguia, Jon; Segurado, Javier; LLorca, Javier
Mechanical properties of tungsten alloys with Y2O3 and titanium additions
Aguirre, M. V.; Martin, A.; Pastor, J. Y.; LLorca, J.; Monge, M. A.; Pareja, R.
Effect of the grain refinement via severe plastic deformation on strength properties and deformation behavior of an A16061 alloy at room and cryogenic temperatures
Moreno-Valle, E. C.; Sabirov, I.; Perez-Prado, M. T.; Murashkin, M. Yu.; Bobruk, E. V.; Valiev, R. Z.
Interdiffusion and Atomic Mobility for Face-Centered-Cubic Co-Al Alloys
Cui, Y. -W.; Tang, B.; Kato, R.; Kainuma, R.; Ishida, K.
Physically-sound simulation of low-velocity impact on fiber reinforced laminates
Lopes, C. S.; Sadaba, S.; Gonzalez, C.; Llorca, J.; Camanho, P. P.
Computational identification of organic porous molecular crystals
Evans, Jack D.; Huang, David M.; Haranczyk, Maciej; Thornton, Aaron W.; Sumby, Christopher J.; Doonan, Christian J.
Precipitation strengthening and reversed yield stress asymmetry in Mg alloys containing rare-earth elements: A quantitative study
Hidalgo-Manrique, P.; Robson, J. D.; Perez-Prado, M. T.
Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression
Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon
Global and local deformation behavior and mechanical properties of individual phases in a quenched and partitioned steel
de Diego-Calderon, I.; De Knijf, D.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sabirov, I.; Foejer, C.; Petrov, R. H.
Prominent role of basal slip during high-temperature deformation of pure Mg polycrystals
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Carreno, F.; Perez-Prado, M. T.
Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials
Munoz, Raul; Delgado, Sofia; Gonzalez, Carlos; Lopez-Romano, Bernardo; Wang, De-Yi; LLorca, Javier
Iterated linear comparison bounds for viscoplastic porous materials with ellipsoidal microstructures
Agoras, M.; Ponte Castaneda, P.
Numerical investigation to prevent crack jumping in Double Cantilever Beam tests of multidirectional composite laminates
Sebaey, T. A.; Blanco, N.; Lopes, C. S.; Costa, J.
Billion-atom synchronous parallel kinetic Monte Carlo simulations of critical 3D Ising systems
Martinez, E.; Monasterio, P. R.; Marian, J.
Void growth in copper during high-temperature power-law creep
Dzieciol, K.; Borbely, A.; Sket, F.; Isaac, A.; Di Michiel, M.; Cloetens, P.; Buslaps, Th; Pyzalla, A. R.
Hierarchical nanoporous silica doped with tin as novel multifunctional hybrid material to flexible poly(vinyl chloride) with greatly improved flame retardancy and mechanical properties
Pan, Ye-Tang; Trempont, Cedric; Wang, De-Yi
Impact of halogen-free flame retardant with varied phosphorus chemical surrounding on the properties of diglycidyl ether of bisphenol-A type epoxy resin: synthesis, fire behaviour, flame-retardant mechanism and mechanical properties
Zhao, Xiaomin; Babu, Heeralal Vignesh; Llorca, Javier; Wang, De-Yi
Effect of indentation size on the nucleation and propagation of tensile twinning in pure magnesium
Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Molina-Aldareguia, J. M.
A computational model coupling mechanics and electrophysiology in spinal cord injury
Jerusalem, Antoine; Garcia-Grajales, Julian A.; Merchan-Perez, Angel; Pena, Jose M.
Diffusion Research in BCC Ti-Al-Mo Ternary Alloys
Chen, Yi; Tang, Bin; Xu, Guanglong; Wang, Chuanyun; Kou, Hongchao; Li, Jinshan; Cui, Yuwen
Microstructural and mechanical characterisation of 7075 aluminium alloy consolidated from a premixed powder by cold compaction and hot extrusion
Jabbari Taleghani, M. A.; Ruiz Navas, E. M.; Torralba, J. M.
Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of ply clustering
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J.
Continuum modeling of a neuronal cell under blast loading
Jerusalem, Antoine; Dao, Ming
The Influence of Intrinsic Framework Flexibility on Adsorption in Nanoporous Materials
Witman, Matthew; Ling, Sanliang; Jawahery, Sudi; Boyd, Peter G.; Haranczyk, Maciej; Slater, Ben; Smit, Berend
Enhancing the fracture resistance of carbon fiber reinforced SiC matrix composites by interface modification through a simple fiber heat-treatment process
Liu, H. T.; Yang, L. W.; Sun, X.; Cheng, H. F.; Wang, C. Y.; Mao, W. G.; Molina-Aldareguia, J. M.
Simultaneous synthesis of vertically aligned carbon nanotubes and amorphous carbon thin films on stainless steel
Romero, Pablo; Oro, Raquel; Campos, Monica; Torralba, Jose M.; Guzman de Villoria, Roberto
Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects
Naya, F.; Gonzalez, C.; Lopes, C. S.; Van der Veen, S.; Pons, F.
Synergistic Effect of Carbon Nanotube and Polyethersulfone on Flame Retardancy of Carbon Fiber Reinforced Epoxy Composites
Li, Cheng; Kang, Nian-Jun; Delgado Labrandero, Sofia; Wan, Jintao; Gonzalez, Carlos; Wane, De-Yi
High-temperature nanoindentation behavior of Al/SiC multilayers
Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N.
Mechanical and electrical properties of an ultrafine grained Al-8.5 wt. % RE (RE=5.4 wt.% Ce, 3.1wt.% La) alloy processed by severe plastic deformation
Murashkin, M. Yu.; Sabirov, I.; Medvedev, A. E.; Enikeev, N. A.; Lefebvre, W.; Valiev, R. Z.; Sauvage, X.
Structure-property relationships of nanocornposites based on polylactide and MgAl layered double hydroxides
Leng, Jing; Purohit, Purv J.; Kang, Nianjun; Wang, De-Yi; Falkenhagen, Jana; Emmerling, Franziska; Thueneman, Andreas F.; Schoenhals, Andreas
One-step hydrothermal synthesis of nano zinc carbonate and its use as a promising substitute for antimony trioxide in flame retardant flexible poly(vinyl chloride)
Pan, Ye-Tang; Wang, De-Yi
A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites
Vajari, Danial Ashouri; Gonzalez, Carlos; Llorca, Javier; Legarth, Brian Nyvang
An eco-friendly way to fire retardant flexible polyurethane foam: layer-by-layer assembly of fully bio-based substances
Wang, Xin; Pan, Ye-Tang; Wan, Jin-Tao; Wang, De-Yi
Interfacial load transfer in carbon nanotube/ceramic microfiber hybrid polymer composites
Lachman, Noa; Wiesel, Erica; Guzman de Villoria, Roberto; Wardle, Brian L.; Wagner, H. Daniel
Shape Dynamics and Rheology of Soft Elastic Particles in a Shear Flow
Gao, Tong; Hu, Howard H.; Ponte Castaneda, Pedro
Influence of the high pressure torsion die geometry on the allotropic phase transformations in pure Zr
Zhilyaev, A. P.; Galvez, F.; Sharafutdinov, A.; Perez-Prado, M. T.
Effect of interface fracture on the tensile deformation of fiber-reinforced elastomers
Moraleda, Joaquin; Segurado, Javier; Llorca, Javier
Effect of phosphorus-containing inorganic-organic hybrid coating on the flammability of cotton fabrics: Synthesis, characterization and flammability
Liu, Yun; Pan, Ye-Tang; Wang, Xin; Acuna, Pablo; Zhu, Ping; Wagenknecht, Udo; Heinrich, Gert; Zhang, Xiu-Qin; Wang, Rui; Wang, De-Yi
Development of constitutive relationship and processing map for Al-6. 65Si-0.44Mg alloy and its composite with B4C particulates
Gangolu, S.; Rao, A. Gourav; Sabirov, I.; Kashyap, B. P.; Prabhu, N.; Deshmukh, V. P.
Three-dimensional dislocation dynamics analysis of size effects on void growth
Chang, Hyung-Jun; Segurado, Javier; LLorca, Javier
Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior
Falco, O.; Mayugo, J. A.; Lopes, C. S.; Gascons, N.; Turon, A.; Costa, J.
Simulation of the deformation of polycrystalline nanostructured Ti by computational homogenization
Segurado, Javier; Llorca, Javier
Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy
Milenkovic, Srdjan; Sabirov, Ilchat; LLorca, Javier
Preparation and characterisation of bioplastics made from cottonseed protein
Yue, H. -B.; Cui, Y. -D.; Shuttleworth, P. S.; Clark, James H.
An experimental and numerical study of the influence of local effects on the application of the fibre push-in test
Molina-Aldareguia, Jon M.; Rodriguez, M.; Gonzalez, C.; LLorca, J.
Optimum high temperature strength of two-dimensional nanocomposites
Monclus, M. A.; Zheng, S. J.; Mayeur, J. R.; Beyerlein, I. J.; Mara, N. A.; Polcar, T.; Llorca, J.; Molina-Aldareguia, J. M.
Orientation dependency of the alpha to omega plus beta transformation in commercially pure zirconium by high-pressure torsion
Srinivasarao, B.; Zhilyaev, A. P.; Perez-Prado, M. T.
Carbon-family materials for flame retardant polymeric materials
Wang, Xin; Kalali, Ehsan Naderi; Wan, Jin-Tao; Wang, De-Yi
Tough Electrodes: Carbon Nanotube Fibers as the Ultimate Current Collectors/Active Material for Energy Management Devices
Vilatela, Juan J.; Marcilla, Rebeca
Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Maimi, P.; Costa, J.
Ant Colony Optimization for dispersed laminated composite panels under biaxial loading
Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Costa, J.
Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys
Herrera-Solaz, V.; Hidalgo-Manrique, R.; Perez-Prado, M. T.; Letzig, D.; Llorca, J.; Segurado, J.
Thermoset curing through Joule heating of nanocarbons for composite manufacture, repair and soldering
Mas, Bartolome; Fernandez-Blazquez, Juan P.; Duval, Jonathan; Bunyan, Humphrey; Vilatela, Juan J.
On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion
Srinivasarao, B.; Zhilyaev, A. P.; Langdon, T. G.; Perez-Prado, M. T.
A green functional nanohybrid: preparation, characterization and properties of a beta-cyclodextrin based functional layered double hydroxide
Kang, Nian-Jun; Wang, De-Yi
Predicting the thermal conductivity of composite materials with imperfect interfaces
Marcos-Gomez, D.; Ching-Lloyd, J.; Elizalde, M. R.; Clegg, W. J.; Molina-Aldareguia, J. M.
New Superefficiently Flame-Retardant Bioplastic Poly(lactic acid): Flammability, Thermal Decomposition Behavior, and Tensile Properties
Zhao, Xiaomin; Guerrero, Francisco Reyes; Lorca, Javier; Wang, De-Yi
Effect of microstructure on fatigue behavior of advanced high strength steels produced by quenching and partitioning and the role of retained austenite
de Diego-Calderon, I.; Rodriguez-Calvillo, P.; Lara, A.; Molina-Aldareguia, J. M.; Petrov, R. H.; De Knijf, D.; Sabirov, I.
Hot forging design and microstructure evolution of a high Nb containing TiAl alloy
Tang, Bin; Cheng, Liang; Kou, Hongchao; Li, Jinshan
Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method
Mesa, M. C.; Oliete, P. B.; Pastor, J. Y.; Martin, A.; LLorca, J.
Influence of strain rate on the twin and slip activity of a magnesium alloy containing neodymium
Dudamell, N. V.; Hidalgo-Manrique, P.; Chakkedath, A.; Chen, Z.; Boehlert, C. J.; Galvez, E.; Yi, S.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T.
Interdiffusion and Atomic Mobility for Face-Centered Cubic (FCC) Co-W Alloys
Cui, Y. -W.; Xu, Guanglong; Kato, R.; Lu, Xiao-Gang; Kainuma, R.; Ishida, K.
Torque rheology of zircon feedstocks for powder injection moulding
Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M.
A constitutive model for the in-plane mechanical behavior of nonwoven fabrics
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Method for Simultaneousiy Improving the Thermal Stability and Mechanical Properties of Poly(lactic acid): Effect of High-Energy Electrons on the Morphological, Mechanical, and Thermal Properties of PLA/MMT Nanocomposites
Wang, De-Yi; Gohs, Uwe; Kang, Nian-Jun; Leuteritz, Andreas; Boldt, Regine; Wagenknecht, Udo; Heinrich, Gert
MMonCa: An Object Kinetic Monte Carlo simulator for damage irradiation evolution and defect diffusion
Martin-Bragado, Ignacio; Rivera, Antonio; Valles, Gonzalo; Luis Gomez-Selles, Jose; Caturla, Maria J.
Influence of texture on the recrystallization mechanisms in an AZ31 Mg sheet alloy at dynamic rates
Dudamell, N. V.; Ulacia, I.; Galvez, F.; Yi, S.; Bohlen, J.; Letzig, D.; Hurtado, I.; Perez-Prado, M. T.
Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties
Multigner, M.; Ferreira-Barragans, S.; Frutos, E.; Jaafar, M.; Ibanez, J.; Marin, P.; Perez-Prado, M. T.; Gonzalez-Doncel, G.; Asenjo, A.; Gonzalez-Carrasco, J. L.
Nanostructured Al and Cu alloys with superior strength and electrical conductivity
Murashkin, M. Yu; Sabirov, I.; Sauvage, X.; Valiev, R. Z.
Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium
Sabirov, I.; Valiev, R. Z.; Semenova, I. P.; Pippan, R.
Enhanced mechanical properties and electrical conductivity in ultrafine-grained Al alloy processed via ECAP-PC
Murashkin, M. Yu; Sabirov, I.; Kazykhanov, V. U.; Bobruk, E. V.; Dubravina, A. A.; Valiev, R. Z.
X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact
Seltzer, R.; Gonzalez, C.; Munoz, R.; LLorca, J.; Blanco-Varela, T.
Characterization of crack propagation in mode I delamination of multidirectional CFRP laminates
Sebaey, T. A.; Blanco, N.; Costa, J.; Lopes, C. S.
Antimicrobial metal-organic frameworks incorporated into electrospun fibers
Quiros, Jennifer; Boltes, Karina; Aguado, Sonia; Guzman de Villoria, Roberto; Jose Vilatela, Juan; Rosal, Roberto
Influence of exfoliated graphite nanoplatelets on the flammability and thermal properties of polyethylene terephthalate/polypropylene nanocomposites
Inuwa, I. M.; Hassan, Azman; Wang, De-Yi; Samsudin, S. A.; Haafiz, M. K. Mohamad; Wong, S. L.; Jawaid, M.
Full elastic constitutive relation of non-isotropic aligned-CNT/PDMS flexible nanocomposites
Sepulveda, A. T.; Guzman de Villoria, R.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Rocha, L. A.
Constitutional and microstructural investigation of the pseudobinary NiAl-W system
Milenkovic, Srdjan; Schneider, Andre; Frommeyer, Georg
Macroscopic fibres of CNTs as electrodes for multifunctional electric double layer capacitors: from quantum capacitance to device performance
Senokos, E.; Reguero, V.; Palma, J.; Vilatela, J. J.; Marcilla, Rebeca
An in situ polymerization approach for functionalized MoS2/nylon-6 nanocomposites with enhanced mechanical properties and thermal stability
Wang, Xin; Kalali, Ehsan Naderi; Wang, De-Yi
Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates
Sket, F.; Enfedaque, A.; Alton, C.; Gonzalez, C.; Molina-Aldareguia, J. M.; Llorca, J.
Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties
Hernandez, S.; Sket, F.; Gonzalez, C.; LLorca, J.
A micro-meso-model of intra-laminar fracture in fiber-reinforced composites based on a discontinuous Galerkin/cohesive zone method
Wu, L.; Tjahjanto, D.; Becker, G.; Makradi, A.; Jerusalem, A.; Noels, L.
Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography
Sket, F.; Seltzer, R.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J.
Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T.
Deformation behavior of a high strength multiphase steel at macro- and micro-scales
de Diego-Calderon, I.; Santofimia, M. J.; Molina-Aldareguia, J. M.; Monclus, M. A.; Sabirov, I.
Mechanical properties of Y2O3-doped W-Ti alloys
Aguirre, M. V.; Martin, A.; Pastor, J. Y.; Llorca, J.; Monge, M. A.; Pareja, R.
Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: An experimental and numerical study
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Beyond traditional light-emitting electrochemical cells – a review of new device designs and emitters
Fresta, Elisa; Costa, Ruben D.
Few layered Co(OH)(2) ultrathin nanosheet-based polyurethane nanocomposites with reduced fire hazard: from eco-friendly flame retardance to sustainable recycling
Zhang, Junhao; Kong, Qinghong; Yang, Lingwei; Wang, De-Yi
Strong Carbon Nanotube Fibers by Drawing Inspiration from Polymer Fiber Spinning
Aleman, Belen; Reguero, Victor; Mas, Bartolome; Vilatela, Juan J.
Intumescent multilayer hybrid coating for flame retardant cotton fabrics based on layer-by-layer assembly and sol-gel process
Wang, Xin; Quintero Romero, Manuel; Zhang, Xiu-Qin; Wang, Rui; Wang, De-Yi
Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites
Williams, J. J.; Segurado, J.; LLorca, J.; Chawla, N.
Effect of grain size on slip activity in pure magnesium polycrystals
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T.
Determination of the mechanical properties of amorphous materials through instrumented nanoindentation
Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J.
The effect of particle shape and distribution on the macroscopic behavior of magnetoelastic composites
Galipeau, Evan; Ponte Castaneda, Pedro
A methodology to measure the interface shear strength by means of the fiber push-in test
Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J.
Antifouling membranes prepared by electrospinning polylactic acid containing biocidal nanoparticles
Dasari, Aravind; Quiros, Jennifer; Herrero, Berta; Boltes, Karina; Garcia-Calvo, Eloy; Rosal, Roberto
An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy
Herrera-Solaz, V.; LLorca, J.; Dogan, E.; Karaman, I.; Segurado, J.
Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates
Enfedaque, A.; Molina-Aldareguia, J. M.; Galvez, F.; Gonzalez, C.; Llorca, J.
Synthesis of aromatic-aliphatic polyamide acting as adjuvant in polylactic acid (PLA)/ammonium polyphosphate (APP) system
Shabanian, Meisam; Kang, Nian-Jun; Wang, De-Yi; Wagenknecht, Udo; Heinrich, Gert
Ballistic performance of nanocrystalline and nanotwinned ultrafine crystal steel
Frontan, Jaime; Zhang, Yuming; Dao, Ming; Lu, Jian; Galvez, Francisco; Jerusalem, Antoine
Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Ultrastiff Biobased Epoxy Resin with High T-g and Low Permittivity: From Synthesis to Properties
Wan, Jintao; Zhao, Jianqing; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Zhao, Ying; Pan, Ye-Tang; Wang, De-Yi
Application of digital image correlation at the microscale in fiber-reinforced composites
Canal, L. P.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; LLorca, J.
Synthesis and characterization of functional eugenol derivative based layered double hydroxide and its use as a nanoflame-retardant in epoxy resin
Li, Cheng; Wan, Jintao; Kalali, Ehsan Naderi; Fan, Hong; Wang, De-Yi
Anisotropy of mechanical properties in high-strength ultra-fine-grained pure Ti processed via a complex severe plastic deformation route
Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.; Semenova, I. P.; Salimgareeva, G. Kh; Valiev, R. Z.
Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics
Totry, Essam; Gonzalez, Carlos; LLorca, Javier
A sustainable, eugenol-derived epoxy resin with high biobased content, modulus, hardness and low flammability: Synthesis, curing kinetics and structure-property relationship
Wan, Jintao; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Kalali, Ehsan Naderi; Wang, Xin; Wang, De-Yi
Oxygen vacancies and interfaces enhancing photocatalytic hydrogen production in mesoporous CNT/TiO2 hybrids
Moya, Alicia; Cherevan, Alexey; Marchesan, Silvia; Gebhardt, Paul; Prato, Maurizio; Eder, Dominik; Vilatela, Juan J.
Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation
Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Bohlen, J.; Gutierrez-Urrutia, I.; Llorca, J.; Molina-Aldareguia, J. M.
A New Approach to Reducing the Flammability of Layered Double Hydroxide (LDH)-Based Polymer Composites: Preparation and Characterization of Dye Structure-Intercalated LDH and Its Effect on the Flammability of Polypropylene-Grafted Maleic Anhydride/d-LDH Composites
Kang, Nian-Jun; Wang, De-Yi; Kutlu, Burak; Zhao, Peng-Cheng; Leuteritz, Andreas; Wagenknecht, Udo; Heinrich, Gert
High temperature micropillar compression of Al/SiC nanolaminates
Lotfian, S.; Rodriguez, M.; Yazzie, K. E.; Chawla, N.; Llorca, J.; Molina-Aldareguia, J. M.
Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites
Hernandez, S.; Sket, F.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J.
Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions
Zhilyaev, A. P.; Sabirov, I.; Gonzalez-Doncel, G.; Molina-Aldareguia, J.; Srinivasarao, B.; Perez-Prado, M. T.
Toughening Polypropylene and Its Nanocomposites with Submicrometer Voids
Dasari, Aravind; Zhang, Qing-Xin; Yu, Zhong-Zhen; Mai, Yiu-Wing
The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy
Sabirov, I.; Barnett, M. R.; Estrin, Y.; Hodgson, P. D.
A novel biobased epoxy resin with high mechanical stiffness and low flammability: synthesis, characterization and properties
Wan, Jintao; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Li, Zhi; Wang, Xin; Wang, De-Yi
Fire retardancy behavior of PLA based nanocomposites
Gonzalez, Alfonso; Dasari, Aravind; Herrero, Berta; Plancher, Emeric; Santaren, Julio; Esteban, Antonio; Lim, Szu-Hui
Three-dimensional investigation of grain boundary-twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling
Fernandez, A.; Jerusalem, A.; Gutierrez-Urrutia, I.; Perez-Prado, M. T.
Multifunctional intercalation in layered double hydroxide: toward multifunctional nanohybrids for epoxy resin
Naderi Kalali, Ehsan; Wang, Xin; Wang, De-Yi
Renewable Cardanol-Based Surfactant Modified Layered Double Hydroxide as a Flame Retardant for Epoxy Resin
Wang, Xin; Kalali, Ehsan Naderi; Wang, De-Yi
Controlling Carbon Nanotube Type in Macroscopic Fibers Synthesized by the Direct Spinning Process
Reguero, Victor; Aleman, Belen; Mas, Bartolome; Jose Vilatela, Juan
Micropillar compression of LiF [111] single crystals: Effect of size, ion irradiation and misorientation
Soler, R.; Molina-Aldareguia, J. M.; Segurado, J.; Llorca, J.; Merino, R. I.; Orera, V. M.
Intraply fracture of fiber-reinforced composites: Microscopic mechanisms and modeling
Pablo Canal, Luis; Gonzalez, Carlos; Segurado, Javier; LLorca, Javier
A finite-strain constitutive theory for electro-active polymer composites via homogenization
Castaneda, P. Ponte; Siboni, M. N.
Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development
Sabirov, I.; Murashkin, M. Yu; Valiev, R. Z.
Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates
Ulacia, I.; Dudamell, N. V.; Galvez, F.; Yi, S.; Perez-Prado, M. T.; Hurtado, I.
Highly thermally conductive flame-retardant epoxy nanocomposites with reduced ignitability and excellent electrical conductivities
Gu, Junwei; Liang, Chaobo; Zhao, Xiaomin; Gan, Bin; Qiu, Hua; Guo, Yonqiang; Yang, Xutong; Zhang, Qiuyu; Wang, De-Yi
Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites
Totry, Essam; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; LLorca, Javier
Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing
LLorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; Seltzer, R.; Sket, F.; Rodriguez, M.; Sadaba, S.; Munoz, R.; Canal, L. P.
Nanocarbon Composites and Hybrids in Sustainability: A Review
Vilatela, Juan J.; Eder, Dominik
Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature
Dudamell, N. V.; Ulacia, I.; Galvez, F.; Yi, S.; Bohlen, J.; Letzig, D.; Hurtado, I.; Perez-Prado, M. T.
New low carbon Q&P steels containing film-like intercritical ferrite
Santofimia, M. J.; Nguyen-Minh, T.; Zhao, L.; Petrov, R.; Sabirov, I.; Sietsma, J.
Functionalized layered double hydroxide-based epoxy nanocomposites with improved flame retardancy and mechanical properties
Naderi Kalali, Ehsan; Wang, Xin; Wang, De-Yi
Bulk Nanostructured Metals for Innovative Applications
Valiev, Ruslan Z.; Sabirov, Ilchat; Zhilyaev, Alexander P.; Langdon, Terence G.
Influence of interface mobility on the evolution of austenite-martensite grain assemblies during annealing
Santofimia, M. J.; Speer, J. G.; Clarke, A. J.; Zhao, L.; Sietsma, J.
Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials
Danas, K.; Ponte Castaneda, P.
Nanostructured titanium-based materials for medical implants: Modeling and development
Mishnaevsky, Leon, Jr.; Levashov, Evgeny; Valiev, Ruslan Z.; Segurado, Javier; Sabirov, Ilchat; Enikeev, Nariman; Prokoshkin, Sergey; Solov'yov, Andrey V.; Korotitskiy, Andrey; Gutmanas, Elazar; Gotman, Irene; Rabkin, Eugen; Psakh'e, Sergey; Dluhos, Ludek; Seefeldt, Marc; Smolin, Alexey
A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity
Valiev, R. Z.; Murashkin, M. Yu; Sabirov, I.
First Experimental Observation of Shear Induced hcp to bcc Transformation in Pure Zr
Perez-Prado, M. T.; Zhilyaev, A. P.
DAMASK: the Dusseldorf Advanced MAterial Simulation Kit for studying crystal plasticity using an FE based or a spectral numerical solver
Roters, F.; Eisenlohr, P.; Kords, C.; Tjahjanto, D. D.; Diehl, M.; Raabe, D.
Metal-organic framework with optimally selective xenon adsorption and separation
Banerjee, Debasis; Simon, Cory M.; Plonka, Anna M.; Motkuri, Radha K.; Liu, Jian; Chen, Xianyin; Smit, Berend; Parise, John B.; Haranczyk, Maciej; Thallapally, Praveen K.
Electrically conductive and super-tough polyamide-based nanocomposites
Dasari, Aravind; Yu, Zhong-Zhen; Mai, Yiu-Wing
In situ analysis of the tensile and tensile-creep deformation mechanisms in rolled AZ31
Boehlert, C. J.; Chen, Z.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T.
Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformation
Fernandez, Ana; Perez Prado, Maria Teresa; Wei, Yujie; Jerusalem, Antoine
Technology & projects department
We count with a dynamic and professional team to support our researchers and partners in the following tasks: Attract funding Full support on competitive proposals preparation, including partner's search and contracts
Seminar of Dr. Christian Leinenbach from EMPA (Swiss Federal Laboratories for Materials Science & Technology), in Zurich, entitle “Microstructure control during laser additive manufacturing – what possibilities do we have?” – At 15:30 pm, in the Seminar Room
Abstract: During the last couple years, laser-based additive manufacturing (AM) technologies such as laser powder bed fusion (LPBF) and directed energy deposition (DED) have evolved from a mere prototyping technology to a real production technology that allow building parts with intricate 3D
Research groups
The Institute is currently organised into sixteen research groups focused on different areas in the field of materials science and engineering. Each of these groups is led by one staff researcher, who is in charge of coordinating and supervising a research team of post and predoctoral researchers.
Who we are
The IMDEA Materials Institute, one of the seven Madrid Institutes for Advanced Studies (IMDEA), is a public research centre founded in 2007 by Madrid’s regional government. The goal of the Institute is to do research at the forefront of Material Science and Engineering, attracting talent from all
Public information request
In case you do not find the information you are looking for in the Transparency Portal, you can present your information request by email (transparencia.materiales@imdea.org) or through postal mail to the following address:Fundación Imdea MaterialesTecnogetafeC/Eric Kandel 228906 GetafeMadrid
Public tenders
(Update on 9th March 2018)We provide the necessary information to contract with IMDEA Materials Foundation. From this page you can access the information concerning the requirements to attend the onerous contracts.That information is governed by Ley 9/2017, de 8 de noviembre, de Contratos del Sector
Economic & statistical information
PresupuestosBudget 2022Budget execution 2022Budget 2023InformesAudit Report and Annual Accounts 2022Statistical dataHeritage * Information available only in Spanish
Institutional information
Record of activities (only available in Spanish)
Alumni Newsletter
(NABISCO) INTEGRATION OF CARBON NANOTUBE FIBRES IN STRUCTURAL COMPOSITES
Funding: China Scholarship CouncilRegion: InternationalProject period: 2016 – 2020Principal Investigator: Drs. Juan José Vilatela(juanjose.vilatela@imdea.org) and Carlos González(carlosdaniel.gonzalez@imdea.org)This project deals with the development of strategies to integrate macroscopic fibres and
(NANOFIRE) NANOMATERIALS VIA HOST-GUEST INTERACTION AS MULTIFUNCTIONAL FIRE RETARDANTS TO POLYMERS
Funding: China Scholarship CouncilRegion: InternationalProject period: 2017 – 2021Principal Investigator: Dr. De-Yi Wang (deyi.wang@imdea.org)This project deals with the development of new generation nanomaterials via host-guest interaction as multifunctional fire retardants to polymers. The aim is
(HIPREP) HIGH PERFORMANCE REINFORCED FIRE-RETARDANT POLYMERS
Funding: China Scholarship CouncilRegion: InternationalProject period: 2015 – 2019Principal Investigator: Dr. De-Yi Wang (deyiwang@imdea.org)The objective of this investigation is to develop high performance reinforced fire-retardant polymers via special molecular design, chemical functionalization
Seminar of Dr. Lorenzo Malerba, from CIEMAT, entitle “On the radiation-induced origin of hardening and embrittlement in nuclear steels” – At 12:30 pm, in the Seminar Room
Abstract: Predicting the changes in macroscopic properties of steels subjected to irradiation is key for the improved and long term safety of nuclear power plants. Because of the inherent complexity of the processes involved, this is a long-lasting challenge for nuclear materials science.
Transversal training
Besides on-the-job technical training, IMDEA Materials Institute is committed to train the Institute’s staff in “soft” or transversal skills. Those competences are relevant to a broad range of occupations and sectors (academic research or teaching career, specialization in a given field or a career
How to arrive
Contact and Location Headquarters
First Year Assessment of Qi Wang, entitle “Design and preparation of nanocarbon/epoxy nanocomposites with advanced flame retardancy and mechanical performance” – In the Seminar Room at 12:00 pm
Abstract: Efforts were paid to obtain nanocarbon/epoxy composites with advanced flame retardancy and mechanical performance, and try to understand the mechanisms. In the first part of the work, when 20 wt% ammonium polyphosphate (APP) in the chosen flame-retardant APP/epoxy composite was replaced
Seminar of Prof. Kostas Danas, from The Ecole Polytechnique (Paris), entitle “Microstructured Magnetorheological Elastomers and Instabilities” -At 12:00 pm in the Seminar Room
Absract: Magnetorheological elastomers (MREs) are ferromagnetic particle impregnated rubbers whose mechanical properties are altered by the application of external magnetic fields. In addition, these composite materials can deform at very large strains due to the presence of the soft polymeric
First Year Assessment of Richard Schaeufele, entitle “Synthesis and Characterisation of Inorganic Nanowires and their Assembly into Macroscopic Structures” – In the Seminar Room at 12:00 pm
Abstract: SiNWs, which are rod-like structures with diameters between 1-100nm and lengths of up to several tenths of micrometers, are an auspicious approach to enhance solar cells, thermoelectric devices and energy storage devices. Their extremely high aspect ratio (classifi ed as 1D material)
The work “Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness”, done by some of our researchers, has been elected as best paper in structural materials for year 2018 by JOM journal.
IMDEA Materials Institute has received a new award. This time, an article signed by some of its scientists has been chosen as the best published in the international JOM magazine. JOM magazine is the communication organ of the TMS, The Minerals, Metals & Materials Society, professional and
Large-scale converting waste coffee grounds into functional carbon materials as high-efficient adsorbent for organic dyes
Special-purpose elements to impose Periodic Boundary Conditions for multiscale computational homogenization of composite materials with the explicit Finite Element Method
Sadaba, S.; Herraez, M.; Naya, F.; Gonzalez, C.; Llorca, J.; Lopes, C.S.
Alumni Newsletter Nº2
Prof. Teresa Pérez Prado appointed as new Deputy Director «IMDEA Materials has provided a unique opportunity both to mature as a scientist as well as to contribute to the creation and growth of a research institute in Spain» Dr. Pérez-Prado was born in Asturias, Spain. She completed an MSc
Effect of intercalation of layered double hydroxides with sulfonate-containing calix[4]arenes on the flame retardancy of castor oil-based flexible polyurethane foams
First Year Assessment of Abdumalik Yusuf, entitle “Study of the influence of phosphorus based flame retardants on the flammability, thermal and electrochemical properties of gel polymer electrolytes” – In the Seminar Room at 12:00 pm
Abstract Today, almost every portable device is powered by a lithium ion battery. Despite the wide use of lithium ion batteries, they suffer from serious safety issues. Gel polymer electrolytes (GPEs) are one of the most promising candidates to solve safety issues such as fire and liquid
José Manuel Torralba
RESEARCH INTERESTS ACADEMIC CAREER HONORS AND AWARDS His main scientific-technical field of interest is Powder Metallurgy (PM), specially powder development and characterization and advanced consolidation methods (field assisted sintering, metal injection moulding, additive manufacturing…).
PhD Defense of Juan Carlos Fernández, entitle “Microstructure-properties relations for hierarchically structured CNT fibres”, under the supervision of Prof. Juan José Vilatela
The PhD Defense will take place at 12 noon, on next Thursday (10th of January), in the Green Room of the Escuela de Caminos of the UPM. Here is the link of the school address in google
IMDEA Material’s Public tenders
(Update on 9th March 2018)We provide the necessary information to contract with IMDEA Materials Foundation. From this page you can access the information concerning the requirements to attend the onerous contracts.That information is governed by Ley 9/2017, de 8 de noviembre, de Contratos del Sector
