Activities

Stick–slip dynamics of flow-induced seismicity on rate and state faults Luis Cueto-Felgueroso Departamento de Ingeniería Civil: Hidráulica, Energía y Medio Ambiente Universidad Politécnica de Madrid luis.cueto@upm.es ABSTRACT Changes in pore pressure due to the injection or extraction of fluids from

Alloys-by-Design: Optimisation of Compositions of Nickel-Based Superalloys Roger C. Reed, Daniel Barba and Enrique Alabort University of Oxford, Departments of Materials and Engineering Science, UK Ni-based superalloys are a class of materials widely used in the aerospace sector due to

Accelerated discovery and development of high temperature structural alloys Michael S. Titus Assistant Professor of Materials Engineering Purdue University Researchers and engineers constantly seek out new materials systems that increase the operating temperatures of critical components in turbine engines, rocket

Abstract Metallic alloys are widely used in engineering and are in constant development to optimize their properties. Computational strategies to perform virtual design and testing of these materials would reduce the high time and costs associated nowadays to the development

Glissile junctions: Insights from discrete dislocation dynamics and development of a continuum model Markus Stricker Karlsruhe Institute of Technology The understanding of the mechanisms governing plastic deformation of metals is the understanding of dislocation motion from single dislocations to collective

Intramolecular Singlet Fission: Insights from Quantum Dynamical Simulations Pedro B. Coto Friedrich-Alexander Universität Erlangen-Nürnberg, Institut für Theoretische Physik und Interdisziplinäres Zentrum für Molekulare Materialien (ICMM), Staudtstraße 7/B2, Erlangen, 91058, Germany Email: pedro.brana-coto@physik.uni-erlange.de Singlet fission (SF) is a spin-allowed process by

Institut für Materialchemie, Technische Universität Wien, Vienna, Austria dominik.eder@tuwien.ac.at In this lecture I will discuss the main challenges in heterogeneous photocatalysis and present two materials design strategies. What are nanocarbon-inorganic hybrids? Hybridising nanocarbon materials, i.e. CNTs and graphene, with active

The PhD Defense will take place next Monday, 22nd of May, at 12:00 pm, in the “Sala Verde” in the E.T.S.I. Caminos (Campus de Ciudad Universitaria, UPM). The link below shows the address of the School: https://www.google.es/maps/place/UPM+-+Escuela+T%C3%A9cnica+Superior+de+Ingenieros+de+Caminos,+Canales+y+Puertos/@40.4467369,-3.7318432,15z/data=!4m5!3m4!1s0x0:0x17ad49d3b682dcda!8m2!3d40.4467369!4d-3.7318432

The PhD Defense will take place next Thursday, May 18th, at 12:00 pm, in the “Sala Verde” in the E.T.S.I. Caminos (Campus de Ciudad Universitaria, UPM). https://www.google.es/maps/place/UPM+-+Escuela+Técnica+Superior+de+Ingenieros+de+Caminos,+Canales+y+Puertos/@40.4467369,-3.7318432,15z/data=!4m5!3m4!1s0x0:0x17ad49d3b682dcda!8m2!3d40.4467369!4d-3.7318432

The PhD Defense will take place next Friday, April 21st, at 11:30 am, in the “Aula de Grados” of the “Padre Soler” building, at the Carlos III University (Leganés Campus).     Abstract Carbon nanotube fibre is an interesting new

Seminar: “A general overview on multiple necking and fragmentation problems in ductile solids subjected to high strain rates” Understanding the fragmentation of ductile solids and structures subjected to high velocity impacts or blast loadings has importance in aerospace industry, military

Schedule of Presentation: 11:30-12:30 on 4th April 2017 Jenny Alongi University of Milan, Department of Chemistry jenny.alongi@unimi.it Polymer flammability represents a major limitation to their employment and thus to the development of most polymer-based advanced materials. Environmental and safety concerns

ABSTRACT: Machine learning, an important part of artificial intelligence, has made a huge impact on many different areas (baking, logistic, telecommunications, etc.) during the last years. Following this trend, there are clear indications that this data-driven technique will play a

The PhD Defense will take place next Monday, April 3rd, at 11:00 am, in the room “Puig Adam” of the Industrial Engineering, School of UPM (c/José Gutiérrez Abascal, 2)   ABSTRACT Epoxy resins are widely applied in transportation, aerospace, electrical and electronic

Abstract We provide a fundamental contact mechanics background to the interpretation of spherical indentation experiments performed in polycrystalline aggregates, single crystalline units, thin films, and minute material scales comprising an atomistic ensemble. A central issue under examination is the extraction

METALS WINTER MEETING 2017 PROGRAM 9:45 Arrival and welcome Session I Chairman: Carmen Cepeda 10:00 Marcos Jiménez “Fatigue behaviour of INCONEL 718 under cyclic conditions” 10:15 Deng Xiangxing “Development of innovative materials for the cutting sector” 10:30 Marta Cartón “Microstructural changes

Abstract LCM techniques such as RTM and VARI still require to be enhanced in order to disseminate their use in the industry. In situ VARI experiments were carried out using synchrotron X-ray computed tomography (SXCT) to study the mechanisms of

The next training course “Economic bussines basic concepts” will be held at the Seminar Room, on March 2nd, 2017. The programme offered is suitable for pre-doctoral and post-doctoral researchers. · Place: IMDEA Materials Institute (Seminar room) Date: March 2nd, 2017