Funding: Regional Government of Madrid, Innovation Hubs call Region: Madrid Project period: 2019 – 2022 Principal Investigators: Carlos Daniel González (carlosdaniel.gonzalez@imdea.org) The goals of this project are the following: Development of advanced simulation toold to predict
Energy storage in multifunctional carbon fiber composites
IMDEA Materials work in the SORCERER project, funded by Clean Sky 2, has been highlighted in the CompositesWorld magazine. Click here to check the whole article.
Post-doctoral Research Associate in Digital Technologies for Processing of Composites
IMDEA Materials is looking for a Research Associate candidate to work in the research project TEMACOM funded by the Innovation Hub Project of the Community of Madrid 2019. Research activities will be focused in the development of new digital technologies based on machine learning algorithms and
Post-doctoral Research Associate in bio-hybrid optoelectronics
IMDEA Materials seeks a full-time Post-doc researcher with a priority to candidates with experience in i) engineering and preparation of fluorescent proteins, ii) spectroscopic characterization of fluorescent proteins (denaturation/renaturation), and iii) bio-materials based on bio-degradable
(SEPIFIRE) STUDY OF SEPIOLITE-BASED FIRE RETARDANT SYSTEMS
Funding: Spanish Ministry of Economy and Competitiveness (National R&D Programme for Societal Challenges)Partners: TOLSA S.A. (Project Coordinator), Materials Science Institute of Madrid (ICMM-CSIC)Region: SpainProject period: 2014 – 2017Principal Investigator: Dr. De-Yi
(NEW EPOXY) NEW GENERATION HIGH-PERFORMANCE FIRE RETARDANT EPOXY NANOCOMPOSITES: STRUCTURE-PROPERTY RELATIONSHIP
Funding: European Union, 7th Framework Programme (PIIF-GA-2013-626682)Region: Europe Project period: 2014 – 2016Principal Investigators: Fellow: Drs. Jintao Wan (jintao.wan@imdea.org); Supervisor: De-Yi Wang (deyi.wang@imdea.org)Epoxy resins find versatile and massive use in wide areas such as
(DESMAN) NEW MULTIFUNCTIONAL MATERIALS FOR AEROSPACE
Funding: B/E AEROSPACE Inc.Region: InternationalProject period: 2014 – 2017Principal Investigator: Dr. Juan José Vilatela (juanjose.vilatela@imdea.org)DESMAN is a three-year industrial contract with B/E AEROSPACE Inc., the worldwide leading manufacturer of aircraft passenger cabin interior
(FOTOFUEL) SOLAR FUELS PRODUCTION CHALLENGES EXCELLENCE NETWORK
Funding: Spanish Ministry of Innovation and competitiveness (National programme for the promotion of excellence in scientific and technical research) (ENE2014-52280-REDT)Partners: IMDEA Energy Institute (Coordinator), Institute of Catalysis and Petrochemistry, Institute of Chemical Research of
(COMETAD) DEVELOPMENT OF COMPUTATIONAL AND EXPERIMENTAL TECHNIQUES FOR ANALYSIS AND DESIGN OF FIRE RETARDANT POLYMERS
Funding: Spanish Ministry of Innovation and competitiveness (National programme for the promotion of excellence in scientific and technical research) (MAT2014-60435-C2-2-R) Partners: International Center for Numerical Methods in Engineering (CIMNE) (Project Coordinator), and IMDEA Materials
(STEM) STRUCTURAL ENERGY HARVESTING COMPOSITE MATERIALS
Funding: Spanish Ministry of Economy and Competitiveness (National R&D Programme for Societal Challenges) (MAT2015-62584-ERC)Region: SpainProject period: 2015 – 2016Principal Investigator: Dr. Juan José Vilatela (juanjose.vilatela@imdea.org)The purpose of this project is the development of new
(FIREINF) FIRE RETARDANT EPOXY INFUSION RESIN COMPOSITES
Funding: Foundation for the Research Development and Application of Composite Materials (FIDAMC)Partners: Foundation for the Research Development and Application of Composite Materials (FIDAMC) and IMDEA MaterialsRegion: Spain Project period: 2015 – 2016Principal Investigator: Dr. De-Yi
(FLARETEX) SUSTAINABLE FLAME RETARDANCY FOR TEXTILES AND RELATED MATERIALS BASED ON NANOPARTICLES SUBSTITUTING CONVENTIONAL CHEMICALS
Funding: European Union, European Cooperation in Science and Technology (COST action MP1105)Partners: 28 participating countries, chaired by Ghent University. IMDEA Materials is one of the representatives of SpainRegion: Europe Project period: 2012 – 2016Principal Investigator: Dr. De-Yi
(MULTICOMP) MULTI-FUNCTIONAL NANO-CARBON COMPOSITE MATERIALS NETWORK
Funding: European Union, European Cooperation in Science and Technology (COST action CA15107)Partners: 31 participating countries, chaired by the Karlsruhe Institute of Technology. IMDEA Materials Institute is one of the representatives of SpainRegion: Europe Project period: 2016 – 2020Principal
Seminar of Prof. Anna Serra from the Polytechnic University of Catalonia, entitle “Atomistic description of grain boundary dislocations and related processes” – At 12:30 pm, in the Seminar Room
Abstract: Grain boundaries (GB) are generally considered as static obstacles to dislocations and sinks for point defects and their clusters. But, in fact, the processes that take place at GBs is more complex and can reveal properties directly related to plasticity phenomena that go beyond the
Seminar of Prof. Eric Charkaluk (Directeur de Recherche CNRS – Laboratoire de Mécanique des Solides & Associate Professor at Ecole Polytechnique in France), entitle “Thermoplasticity through the scales” – At 12:00 pm, in the Seminar Room
ABSTRACT The Thermodynamics of Irreversible Processes (TPI) applied to the mechanics of materials boomed significantly in France in the 60s and 70s, under the impulse of Paul Germain. The formalization of the Generalized Standard Materials, proposed in 1975 by Bernard Halphen and Quoc-Son Nguyen,
Exploring the microstructure and tensile properties of cold-rolled low and medium carbon steels after ultrafast heating and quenching
Cerda, F. M. C.; Schulz, B.; Celentano, D.; Monsalve, A.; Sabirov, I.; Petrov, R. H.
05/03/2018 Contratación de los servicios de limpieza del Instituto IMDEA Materiales a adjudicar por procedimiento libre (abierto) con pluralidad de criterios
La Fundación IMDEA Materiales anuncia la licitación para la CONTRATACIÓN DE LOS SERVICIOS DE LIMPIEZA DEL INSTITUTO IMDEA MATERIALES A ADJUDICAR POR PROCEDIMIENTO LIBRE (ABIERTO) CON PLURALIDAD DE CRITERIOS. Número de expediente: Ref. 01/2018 Forma de adjudicación: Procedimiento
30/11/2017 – CONTRATACIÓN DE SUMINISTRO DE AM400 LASER MELTING SYSTEMS
Contrato de suministro de AM400 Laser Melting Systems a adjudicar por procedimiento negociado sin publicidad y por exclusividad. 30-11-2017, ANUNCIO DE LICITACIÓN El presente contrato tiene naturaleza desuministro y está sometido a regulación armonizada al ser su valor estimado superior a lo
17/11/2017 Contratación de suministro, instalación y puesta en funcionamiento de un evaporador de ultravacío para la fabricación de capas finas de metales y materiales orgánicos a adjudicar por procedimiento libre (abierto) con pluralidad de criterios
La Fundación IMDEA Materiales anuncia la licitación para la contratación de suministro, instalación y puesta en funcionamiento de un evaporador de ultravacío para la fabricación de capas finas de metales y materiales orgánicos a adjudicar por procedimiento libre (abierto) con pluralidad de
07/07/2017 – CONTRATACIÓN DE LOS SERVICIOS DE IMPLANTACIÓN DEL SISTEMA DE GESTIÓN IDINET
Contrato de servicios de implantación del programa IDINET a adjudicar por procedimiento negociado sin publicidad y por exclusividad. 07-07-2017, ANUNCIO DE LICITACIÓN El presente contrato tiene naturaleza de servicios y no está sometido a regulación armonizada al ser su valor estimado inferior
24/06/2017 Contratación de los servicios de seguridad y auxiliar de servicios (conserjería) de la sede del Instituto IMDEA Materiales a adjudicar por procedimiento abierto con pluralidad de criterios.
La Fundación IMDEA Materiales anuncia la licitación para la CONTRATACIÓN DE LOS SERVICIOS DE SEGURIDAD Y AUXILIAR DE SERVICIOS (CONSERJERÍA) DE LA SEDE DEL INSTITUTO IMDEA MATERIALES A ADJUDICAR POR PROCEDIMIENTO ABIERTO CON PLURALIDAD DE CRITERIOS. Número de expediente: Ref.
07/07/2017 Contratación de los servicios de mantenimiento integral del Instituto IMDEA Materiales a adjudicar por procedimiento abierto con pluralidad de criterios.
La Fundación IMDEA Materiales anuncia la licitación para la CONTRATACIÓN DE LOS SERVICIOS DE MANTENIMIENTO INTEGRAL DEL INSTITUTO IMDEA MATERIALES A ADJUDICAR POR PROCEDIMIENTO ABIERTO CON PLURALIDAD DE CRITERIOS. Número de expediente: Ref. 02/2017 Forma de
18/10/2011 Contrato de las obras de instalaciones en los laboratorios de la nueva sede de IMDEA Materiales en Tecnogetafe
Este contrato se rige por las normas internas de contratación de la fundación. El proceso se iniciará a partir del 18 de octubre del 2011. Entidad adjudicadora: Fundación IMDEA Materiales Tipo de contrato: ObrasObjeto del contrato: Contrato de las obras de instalaciones en los
04/10/2011 Contrato de las obras de ejecución del vial en Parque Equipado Getafe Sur – Tecnogetafe
Este contrato se rige por las normas internas de contratación de la fundación. El proceso se iniciará a partir del 4 de octubre del 2011. Entidad adjudicadora: Fundación IMDEA Materiales Tipo de contrato: ObrasObjeto del contrato: Contrato de las obras de ejecución del vial en Parque
27-01-2012, Licitación del contrato de suministro y montaje de mobiliario del edificio de la Fundación IMDEA Materiales en Tecnogetafe
04-06-2012, ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 16/05/2012, ha resuelto la adjudicación definitiva delContrato para el suministro y montaje del mobiliario de la nueva sede de IMDEA Materiales en Tecnogetafe. LOTE 1: Mobiliario zona
14/11/2012 Contrato de Suministro, Instalación y mantenimiento de un equipo de extrusión a adjudicar por procedimiento abierto con pluralidad de criterios.
Las empresas interesadas en participar en el proceso de licitación deben remitir comunicación vía correo electrónico a la dirección de contacto indicada en los pliegos (juanjose.vilatela@imdea.org) confirmando su interés. En dicho correo deben indicar como asunto “Contrato de suministro de un equipo
11/05/2015 Contrato de suministro, instalación y puesta en funcionamiento de un espectrómetro RAMAN de alta resolución a adjudicar por procedimiento reducido
11-05-2015, ANUNCIO DE LICITACIÓN El presente contrato es de suministro. Al ser el importe inferior a los límites establecidos en el artículo 15, no es un contrato sometido a regulación armonizada, rigiéndose por las normas internas de contratación. Presentación de ofertas: Las
29/04/2015 Contrato de suministro, instalación y puesta en funcionamiento de una plataforma de ensayos nanomecánicos in-situ dentro de un microscopio electrónico de transmisión y barrido a adjudicar por procedimiento libre con pluralidad de criterios
9-04-2015, ANUNCIO DE LICITACIÓN Las empresas interesadas en participar en el proceso de licitación deben remitir comunicación vía correo electrónico a la dirección de contacto indicada en los pliegos (jon.molina@imdea.org) confirmando su interés. En dicho correo deben indicar como asunto
29/04/2015 Contrato de suministro, instalación y puesta en funcionamiento de una plataforma de ensayos nanomecánicos in-situ dentro de un microscopio electrónico de transmisión y barrido a adjudicar por procedimiento libre con pluralidad de criterios
“Proyecto cofinanciado con fondos FEDER correspondientes al Programa Operativo de la Comunidad de Madrid, periodo 2007-2013” 08/07/2015 ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 08/07/2015, ha resuelto la adjudicación definitiva
29/04/2015 Contrato de suministro, instalación y puesta en funcionamiento de una plataforma de ensayos nanomecánicos in-situ dentro de un microscopio electrónico de transmisión y barrido a adjudicar por procedimiento libre con pluralidad de criterios
“Proyecto cofinanciado con fondos FEDER correspondientes al Programa Operativo de la Comunidad de Madrid, periodo 2007-2013” 08/07/2015 ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 08/07/2015, ha resuelto la adjudicación definitiva
15/12/2014 Contrato de suministro e instalación de un equipo de difracción de rayos X (DRX) a adjudicar por procedimiento libre con pluralidad de criterios
Contrato de suministro e instalación de un equipo de difracción de rayos X (DRX) a adjudicar por procedimiento libre con pluralidad de criterios. 10/03/2015 ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 10/03/2015, ha resuelto la adjudicación
15/12/2014 Contratación de los servicios de limpieza del Instituto IMDEA Materiales
Contratación de los servicios de limpieza del Instituto IMDEA Materiales a adjudicar por procedimiento libre (abierto) con pluralidad de criterios. 10/03/2015 ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 10/03/2015, ha resuelto la adjudicación
18/11/2014 Contratación de los servicios de secretaría técnica de la plataforma tecnológica española de materiales avanzados y nanomateriales (MATERPLAT)
18/12/2014, ADJUDICACIÓN Fundación Tecnalia Research & Innovation Importe: 95.000,00 € (IVA no incluido) Este contrato se rige por las normas internas de contratación de la fundación. El proceso se iniciará a partir del 18 de noviembre del 2014. Entidad adjudicadora: Fundación IMDEA
17/09/2014 Contrato de suministro e instalación de un sistema de micro extrusión
04-12-2014, ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 03/12/2014, ha resuelto la adjudicación definitiva del CONTRATO DE SUMINISTRO E INSTALACIÓN DE UN SISTEMA DE MICROCOMPOUNDING, a la empresa TECNOSA Nuevas Tecnologías
28/07/2014 Contrato de suministro e instalación de una Plataforma de Ensayos Mecánicos Multiescala con Observación in –situ dentro de un Microscopio Electrónico de Barrido
Contrato de suministro e instalación de una Plataforma de Ensayos Mecánicos Multiescala con Observación in –situdentro de un Microscopio Electrónico de Barrido es a adjudicar por Pactado sin Publicidad. 28-07-2014, ANUNCIO DE LICITACIÓN El presente contrato es de suministro. Al ser el
25/09/2013 Contrato de suministro e instalación de una PLATAFORMA INTEGRAL PARA LA CARACTERIZACIÓN MECÁNICA
Contrato de suministro e instalación de una PLATAFORMA INTEGRAL PARA LA CARACTERIZACIÓN MECÁNICA EN RÉGIMEN ESTÁTICO, FATIGA E IMPACTO para MATERIALES ESTRUCTURALES a adjudicar por procedimiento abierto con pluralidad de criterios. 21/01/2014 – ADJUDICACIÓN DEFINITIVA El Órgano de Contratación
23/04/2013 Contrato de suministro e instalación de un equipo de MICROSCOPÍA ELECTRÓNICA DE BARRIDO DE EMISIÓN DE CAMPO (FEGSEM) CON COLUMNA DE IONES FOCALIZADOS (FIB) a adjudicar por procedimiento abierto con pluralidad de criterios.
15-07-2013, ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 15/07/2013, ha resuelto la adjudicación definitiva del Contrato para el suministro e instalación de un equipo de microscopía electrónica. Adjudicación: FEI EUROPE B.V.Condiciones de
08/03/2013 – REFERENCIA: ACUERDO MARCO 2013/03 PARA LA CONTRATACIÓN DE SERVICIOS DE LIMPIEZA
30/05/2013 Adjudicación El Órgano de Contratación del ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE LIMPIEZA DE LOS INSTITUTOS MADRILEÑOS DE ESTUDIOS AVANZADOS EN ENERGÍA, MATERIALES, NANOCIENCIA Y SOFTWARE DURANTE UN PERIODO DE CUATRO AÑOS reunido con fecha 24/05/2013 ha decidido adjudicar
22/02/2013 REFERENCIA: ACUERDO MARCO 2013/02 – ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE MANTENIMIENTO INTEGRAL
05/07/2013 Adjudicación El Órgano de Contratación del ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE MANTENIMIENTO INTEGRAL DE LOS INSTITUTOS MADRILEÑOS DE ESTUDIOS AVANZADOS EN ENERGÍA, MATERIALES, NANOCIENCIA Y SOFTWARE DURANTE UN PERIODO DE CUATRO AÑOS reunido con fecha 05/07/2013 ha
22/02/2013 REFERENCIA: ACUERDO MARCO 2013/02 – ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE MANTENIMIENTO INTEGRAL
05/07/2013 Adjudicación El Órgano de Contratación del ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE MANTENIMIENTO INTEGRAL DE LOS INSTITUTOS MADRILEÑOS DE ESTUDIOS AVANZADOS EN ENERGÍA, MATERIALES, NANOCIENCIA Y SOFTWARE DURANTE UN PERIODO DE CUATRO AÑOS reunido con fecha 05/07/2013 ha
22/02/2013 – REFERENCIA: ACUERDO MARCO 2013/01 PARA LA CONTRATACIÓN DE SERVICIOS DE SEGURIDAD Y AUXILIAR DE SERVICIOS (CONSERJERÍA)
30/05/2013 Adjudicación El Órgano de Contratación del ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE SEGURIDAD Y AUXILIAR DE SERVICIOS (CONSERJERÍA)DE LOS INSTITUTOS MADRILEÑOS DE ESTUDIOS AVANZADOS EN ENERGÍA, MATERIALES, NANOCIENCIA Y SOFTWARE DURANTE UN PERIODO DE CUATRO AÑOS reunido con
04/05/2009 Contrato de servicios de dirección integrada de proyecto y gestión de las obras de construcción del edificio para la sede de la fundación IMDEA Materiales
Última modificación: Adjudicación Definitiva (Fecha de publicación 19/02/2010) Acuerdo de la Comisión Delegada, fecha 04 de mayo de 2009, por el que se publica la licitación del CONTRATO DE SERVICIOS DE DIRECCIÓN INTEGRADA DE PROYECTO Y GESTIÓN DE LAS OBRAS DE CONSTRUCCIÓN DEL
20/07/2011 Contrato para el suministro y montaje de los laboratorios de investigación de la nueva sede de IMDEA Materiales en Tecnogetafe
27/09/2011 Convocatoria del SEGUNDO ACTO PÚBLICO del proceso de LICITACIÓN DEL CONTRATO DE SUMINISTRO Y MONTAJE DE LOS LABORATORIOS DE INVESTIGACIÓN DE LA NUEVA SEDE DE IMDEA MATERIALES EN TECNOGETAFE Tal y como se establece en el pliego de cláusulas jurídicas que rige el contrato para el
Collaboration agreement with Waseda University
Our Institute has just signed a reseach collaboration agreement with Waseda University related to new material development for energy production and storage. This agreement will allow exchange of research staff between both institutions.
Seminar of Amaia Cipitria from Max Planck Institute of Colloids and Interfaces in Potsdam (Germany), entitle “Biomaterial physical properties in tissue regeneration” – At 12:00 pm, in the Seminar Room
Abstract: Cells respond not only to biochemical but also to physical cues, such as stiffness, geometry and matrix degradability. In-vitro studies showed that hydrogel elasticity or degradation properties alone can direct cell differentiation, while scaffold geometry can control tissue growth rate.
Seminar of Juan Pablo Fuenzalida from the University of Münster (Germany), entitle “Protein-based acoustic and photon spectroscopy: Applications from biomaterials to protein design” – At 12:00 pm, in the Seminar Room
Abstract: Evolution has provided us with the most abundant and versatile source of materials. In my talk, I will show how proteins can be used as labels and as building blocks. We will explore how an enzyme can be mutated and genetically conjugated to provide a tool for nanoparticle tracking and
Scientific partnerships
IMDEA Materials Institute is stablishing strategic partnerships with other research centres and universities around the world, which are internationally recognised in the field of Materials Science and Engineering. The goal is to create long-term collaboration frameworks of mutual benefit to develop
PhD Defense of Marta Cartón entitle “Development and optimization of the properties of gamma/gamma´ co-based superalloys for high temperature applications”, under the supervision of Prof. José Manuel Torralba Castello and Prof. Mónica Campos Gomez.
The PhD Defense will take place, at 11:30, on next Thursday 21st of February, in Carlos III University (Leganes) in the classroom 7.01.H01. The dissertation is entitled “Development and optimization of the properties of gamma/gamma´ co-based superalloys for high temperature applications". Here is
OptiQPAP consortium members participated in the Workshop OpTOMuST
Consortiums of three RFCS-funded projects (OptiQPAP, TOOLKIT and MuSTMeF) have actively participated in the cross-project Workshop OpTOMuST organized by Dr. Piet Kok (TATA Steel) and Prof. Leo Kestens (University of Ghent) on February 11-13, 2019 in Ghent. The participants had an opportunity to
An analysis of void formation mechanisms in out-of-autoclave prepregs by means of X-ray computed tomography
Torres, J. J.; Simmons, M.; Sket, F.; Gonzalez, C.
Microstructure, mechanical properties and aging behaviour of nanocrystalline copper-beryllium alloy
Lomakin, I.; Castillo-Rodriguez, M.; Sauvage, X.
Capturing chemical intuition in synthesis of metal-organic frameworks
Moosavi, S. M.; Chidambaram, A.; Talirz, L.; Haranczyk, M.; Stylianou, K. C.; Smit, B.
Interaction of Hemispherical Blast Waves with Inhomogeneous Spheres: Probing the Collision of a Supernova Ejecta with a Nearby Companion Star in the Laboratory
Garcia-Senz, D.; Velarde, P.; Suzuki-Vidal, F.; Stehle, C.; Cotelo, M.; Portillo, D.; Plewa, T; Pak, A.
20% success rate in call 2018 of Marie Skłodowska-Curie Actions Individual Fellowships
2 Marie Skłodowska-Curie Actions Individual Fellowships have recently been awarded to our Institute, and 2 more are on the reserve list. That represents a 20% success rate. Our new fellows will work in top-notch areas such as the numerical exploration of metallurgical alloys and inducing doping in
Influence of the Characteristics of Expandable Graphite on the Morphology, Thermal Properties, Fire Behaviour and Compression Performance of a Rigid Polyurethane Foam
Acuna, P.; Li, Z.; Santiago-Calvo, M.; Villafane, F.; Rodriguez-Perez, M. A.; Wang, D. Y.
Non-Isothermal Crystallization Behavior of PEEK/Graphene Nanoplatelets Composites from Melt and Glass States
Alvaredo, A.; Martin, M. I.; Castell, P.; de Villoria, R. G.; Fernandez-Blazquez, J. P.
Andrea Fernández, winner of the award in environment of the “Young Talent Awards-Card Young”, given by Angel Garrido.
The president of the Community of Madrid, Angel Garrido, has participated in the ceremony of delivery of the "Talento Joven-Carné Joven", which recognized the trajectory of five young people between 14 and 30 years old who have highlighted in the last year in five categories: volunteering,
IV Edition of the Young Talent Awards
Our colleague Andrea Fernández Gorgojo, has been awarded one of the Young Talent Awards (premio Talento Joven-Carné Joven ) from the regional government of Madrid (Comunidad de Madrid) in the environmental category due to her innovative project focused in the application of new materials to obtain
Women who design the future
In this opinion article in "El País" journal, our researcher Andrea García-Junceda claims the role of women in research centers, Universities and laboratories around the world. In order to achieve full and equal access to and participation in science for women and girls, and further achieve gender
Flame Retardant Polypropylene Composites with Low Densities
Perez, N.; Qi, X. L.; Nie, S. B.; Acuna, P.; Chen, M. J.; Wang, D. Y.
The influence of positive pulses on HiPIMS deposition of hard DLC coatings
Santiago, J. A.; Fernandez-Martinez, I.; Kozak, T.; Capek, J.; Wennberg, A.; Molina-Aldareguia, J. M.; Bellido-Gonzalez, V.; Gonzalez-Arrabal, R.; Monclus, M. A.
Seminar of Joshua Kiefer from Delft University of Technology, in Holand, entitle “An example case for Machine-Learning in Materials Science: A neural networks based framework for ‘smart’ computational micromechanics of composites” – At 2:30 pm, in the Seminar Room
Abstract: We shall present a ‘smart’ framework, developed to create surrogate models of complex phenomena in an automated way, based on a minimum amount of computer simulations. To do so, the framework combines Design of Experiments, Computational Modeling, and Neural Networks. While such a
A New Approach Toward Designing and Synthesizing the Microalloying Zn Biodegradable Alloys with Improved Mechanical Properties
Liu, ZL
Toward Automated Tools for Characterization of Molecular Porosity
Garcia, I. G.; Bernabei, M.; Haranczyk, M.
The Incorporation of omega Particles during Growing or Coarsening Process in Metastable beta Titanium Alloy
Tang, Bin; Kou, Hongchao; Cui, Y. -W.; Chang, Hui; Li, Jinshan; Zhou, Lian
Interdiffusion Study and Assessment of Mobility for Ti-Mo Alloys
Feng, Liang; Huang, Lei; Chang, Hui; Cui, Yu-wen; Li, Jin-shan
Directionally Solidified Eutectic and Advanced Ceramics Preface
Ramirez-Rico, Joaquin; Martinez-Fernandez, Julian; Llorca, Javier; Orera, Victor M.; Sayir, Ali
Model for the Annealing of Partial Martensite-Austenite Microstructures in Steels
Santofimia, M. J.; Speer, J. G.; Zhao, L.; Sietsma, Jilt
Effect of Grain Refinement on the Mechanical Behaviour of an Al6061 Alloy at Cryogenic Temperatures
Moreno-Valle, E.; Perez-Prado, M. T.; Murashkin, M. Yu.; Valiev, R. Z.; Bobruk, E. V.; Sabirov, I.
ADVANCES AND CHALLENGES IN THE COMPUTATIONAL SIMULATION OF COMPOSITES
LLorca, J.
Downsizing of single crystalline high aspect ratio tungsten nanowires
Milenkovic, Srdjan; Drensler, Stefanie; Hassel, Achim Walter
Untitled
Danninger, H.; Torralba, J. M.
Processing-Microstructure-Property Relationships & Deformation Mechanisms of Magnesium Alloys Foreword
Perez-Prado, M. T.; LLorca, J.; Boehlert, C. J.
International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control Foreword
Cui, Yuwen; Torralba, Jose M.; Lu, Xiao-Gang
Low temperature junction formation by Solid Phase Epitaxy on thin film devices: atomistic modeling and experimental achievements
Sklenard, B.; Batude, P.; Pasini, L.; Fenouillet-Beranger, C.; Previtali, B.; Casse, M.; Brunet, L.; Rivallin, P.; Barbe, J-C.; Tavernier, C.; Cristoloveanu, S.; Vinet, M.; Martin-Bragado, I.
Effect of solidification parameters on the secondary dendrite arm spacing in MAR M-247 superalloy determined by a novel approach
Milenkovic, S.; Rahimian, M.; Sabirov, I.; Maestro, L.
INFLUENCE OF THE FIBER ALIGNMENT IN THE BALLISTIC PERFORMANCE OF DYNEEMA NON-WOVEN FABRICS
Martinez-Hergueta, Francisca; Galvez, Francisco; Gonzalez, Carlos
Ultra-fine grained Al-Mg alloys with superior strength via physical simulation
Sabirov, I.; Enikeev, N.; Kazykhanov, V.; Valiev, R.; Murashkin, M.
Compositional dependence of serrated flow in nickel binary solid solutions during high-temperature microindentation
Gan, Bin; Tin, Sammy
Atomistic modelling and simulation of arsenic diffusion including mobile arsenic clusters
Martin-Bragado, Ignacio; Zographos, Nikolas; Castrillo, Pedro
MICROTESTING AND CRYSTAL PLASTICITY MODELLING OF IN718 SUPERALLOY GRAINS
Cruzado, A.; Gan, B.; Chang, H.; Ostolaza, K.; Linaza, A.; Milenkovic, S.; Molina-Aldareguia, J. M.; Llorca, J.; Segurado, J.
Oxidation behavior and thermal stability of a NiAlV eutectic alloy
Milenkovic, Srdjan; Caram, Rubens
Pressed and sintered AISI 4140 PM low alloy steel from gas atomised powders
Navarro, G.; Jabbari Taleghani, M. A.; Torralba, J. M.
On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31
Boehlert, Carl; Chen, Zhe; Gutierrez-Urrutia, Ivan; Llorca, Javier; Perez-Prado, Maria Teresa
Comment on Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials by K. Danas and P. Ponte Castaneda Response
Danas, Kostas; Ponte Castaneda, Pedro
Depth sensing indentation of organic-inorganic hybrid coatings deposited onto a polymeric substrate
Fasce, L. A.; Seltzer, R.; Frontini, P. M.
A special issue of Comptes Rendus Mecanique in honor of Andre Zaoui Preface
Bornert, M.; Brenner, R.; Castelnau, O.; Ponte Castaneda, P.; Suquet, P.
TENSILE AND CREEP DEFORMATION MECHANISMS IN ROLLED AZ31
Chen, Z.; Boehlert, C.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T.
Modeling and Optimization of Solar Cells
Moroz, Victor; Huang, Joanne; Letay, Gergoe; Martin-Bragado, Ignacio
Evolution of texture and microstructure of AZ31 Mg alloy sheet at high strain rates
Ulacia, I.; Dudamell, N. V.; Esnaola, J. A.; Yi, S. B.; Perez-Prado, M. T.; Galvez, F.; Letzig, D.; Hurtado, I.
Editorial
Petrov, R.; Sabirov, I.
CompTest 2015-Composites testing and model identification international conference, 8-10 April 2015 in Madrid, Spain
Gonzalez, Carlos; Lopes, Claudio; LLorca, Javier; Wisnom, Michael R.; Pierron, Fabrice
Symposium on New Steels for Applications Under Extreme Conditions Foreword
Garcia-Junceda, Andrea; Santofimia, Maria Jesus
On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels
Garcia-Junceda, Andrea; Campos, Monica; Garcia-Rodriguez, Nerea; Manuel Torralba, Jose
A distributed-memory parallel lattice Kinetic Monte Carlo algorithm for crystal growth applied to barite (001) face
Abujas-Pereira, Jeronimo; Martin-Bragado, Ignacio; Pina, Carlos M.; Pizarro, Joaquin; Galindo, Pedro L.
Computational study of atomic mobility in hcp Mg-Al-Zn ternary alloys
Wang, Jingya; Li, Na; Wang, Chuanyun; Ignacio Beltran, Juan; LLorca, Javier; Cui, Yuwen
Beneficial effect of the mechanical bond on carbon nanotube polymer fillers
Lopez, Alejandro; Moffa, Maria; Bernal, Mar; De Juan, Alberto; Fernandez-Blazquez, Juan P.; Vilatela, Juan; Pisignano, Dario; Perez, Emilio
Preparation and Properties of a Main-Chain Smectic Liquid Crystalline Elastomer with Shape-Memory Ability
Martinez-Gomez, Aranzazu; Fernandez-Blazquez, Juan P.; Bello, Antonio; Perez, Ernesto
Towards accurate porosity descriptors based on guest-host interactions
Paik, Dooam; Haranczyk, Maciej; Kim, Jihan
A stabilized meshless method for the solution of the lagrangian equations of newtonian fluids
Urrecha, M.; Romero, I.
A NEW APPROACH TO UNDERSTAND THE CONTRIBUTION OF THE MICROSTRUCTURE IN THE FRACTURE BEHAVIOR OF SINTERED STEELS
Bernardo, Elena; Galan-Salazar, Andrea; Campos, Monica; Torralba, Jose M.
Preface: special issue on computational micromechanics of materials
Segurado, Javier; Sadowski, Tomasz; LLorca, Javier; Schmauder, Siegfried
Multiscale modeling of the small punch test in nanostructured Ti
Ridruejo, Alvaro; Segurado, Javier; Cristina Moreno-Valle, Eva; Sabirov, Ilchat; LLorca, Javier
Tribo-Mechanical Properties of Hard Hydrogen-Free Diamond-Like Carbon Coatings Prepared by Magnetron Sputtering
Fernandez-Martinez, Ivan; Antonio Santiago, Jose; Bellido-Gonzalez, Victor; Monclus, Miguel; Molina, Jon; Gonzalez-Arrabal, Raquel; Papa, Frank; Wennberg, Ambiorn
On the use of a localized STRASS technique to obtain highly tensile strained Si regions in advanced FDSOI CMOS devices
Bonnevialle, A.; Reboh, S.; Le Royer, C.; Morand, Y.; Hartmann, J. -M.; Rouchon, D.; Pedini, J. -M.; Tabone, C.; Rambal, N.; Payet, A.; Plantier, C.; Boeuf, F.; Haond, M.; Claverie, A.; Vinet, M.
High Frequency Dissipative Integration Schemes for Linear and Nonlinear Elastodynamics
Romero, Ignacio
Investigation of the Deformation Activation Volume of an Ultrafinegrained Ti50Ni50 Alloy
Gunderov, D. V.; Churakova, A. A.; Lukianov, A. V.; Prokofiev, E. A.; Prokoshkin, S. D.; Kreizberg, A. Yu.; Raab, G. I.; Sabirov, I. N.
NEW FINDINGS ON THE WETTABILITY AND SPREADING OF COPPER ON IRON-BASE SUBSTRATES
Bernardo, Elena; de Oro, Raquel; Campos, Monica; Torralba, Jose M.
Effect of Hydrostatic Pressure on the 3D Porosity Distribution and Mechanical Behavior of a High Pressure Die Cast Mg AZ91 Alloy
Sket, Federico; Fernandez, Ana; Jerusalem, Antoine; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria
Enhanced ductility of ultra-fine grained metallic materials
Sabirov, I.
Ballistic performance of hybrid nonwoven/woven polyethylene fabric shields
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Mesoporous metal oxide/pyrophosphate hybrid originated from reutilization of water treatment resin as a novel fire hazard suppressant
Pan, Ye-Tang; Castillo-Rodriguez, Miguel; Wang, De-Yi
Thermodynamic mechanism of the intermixing of multilayered structures in the SiOx/SiO2 superlattices with nanometer thick layers
Sarikov, Andrey; Zhigunov, Denis
Effect of Cellulose Nanocrystals on Fire, Thermal and Mechanical Behavior of N,N ‘-Diallyl-phenylphosphoricdiamide Modified Poly(lactic acid)
Yang, Weijun; Zhao, Xiaomin; Fortunati, Elena; Dominici, Franco; Kenny, Jose M.; Puglia, Debora; Wang, De-Yi
A generalization of Castigliano’s theorems for structures with eigenstrains
Romero, I.
Structure-Property Relationships of Nanocomposites Based on Polylactide and Layered Double Hydroxides – Comparison of MgAl and NiAl LDH as Nanofiller
Leng, Jing; Kang, Nianjun; Wang, De-Yi; Falkenhagen, Jana; Thuenemann, Andreas F.; Schoenhals, Andreas
Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods
Lin, B. C.; Li, X.; Jain, Atul; Wu, M-S; Mier, R.; Herraez, M.; Gonzalez, C.; LLorca, J.; Nutt, S. R.
Formulation and numerical solution of non-smooth elasto-visco-plasticity models
del Pozo, D.; Romero, I.
Lattice kinetic Monte Carlo simulation of epitaxial growth of silicon thin films in H-2/SiH4 chemical vapor deposition systems
Pablo Balbuena, Juan; Martin-Bragado, Ignacio
Quantum Dots, Fluorescent Proteins Vie for Supremacy
Costa, Ruben D.
Weak interface dominated high temperature fracture strength of carbon fiber reinforced mullite matrix composites
Yang, L. W.; Liu, H. T.; Jiang, R.; Sun, X.; Mao, W. G.; Cheng, H. F.; Molina-Aldareguia, J. M.
Ring-Opening Copolymerization of Mixed Cyclic Monomers: A Facile, Versatile and Structure-Controllable Approach to Preparing Poly(methylphenylsiloxane) with Enhanced Thermal Stability
Li, Cheng; Zhang, Deqi; Wu, Linbo; Fan, Hong; Wang, Deyi; Li, Bo-Geng
A new approach for the solution of the neighborhood problem in meshfree methods
Tapia-Fernandez, Santiago; Romero, Ignacio; Garcia-Beltran, Angel
{110}-Terminated Square-Shaped Gold Nanoplates and Their Electrochemical Surface Reactivity
Chen, Ying; Milenkovic, Srdjan; Hassel, Achim Walter
Compositional screening of Zr-Nb-Mo alloys with CALPHAD-type model for promising bio-medical implants
Liang, J. S.; Liu, L. B.; Xu, G. L.; Wang, X.; Zhang, L. G.; Shi, X.; Tao, X. M.
MUESLI – a Material UnivErSal LIbrary
Portillo, David; del Pozo, Daniel; Rodriguez-Galan, Daniel; Segurado, Javier; Romero, Ignacio
Kinetic Monte Carlo simulation of phase-precipitation versus instability behavior in short period FeCr superlattices
Rodriguez-Martinez, F. J.; Castejon-Mochon, J. F.; Castrillo, P.; Berenguer-Vidal, R.; Dopico, I.; Martin-Bragado, I.
Influence of cerebral blood vessel movements on the position of perivascular synapses
Urrecha, Miguel; Romero, Ignacio; DeFelipe, Javier; Merchan-Perez, Angel
RETRACTION: Atomistic simulation of damage accumulation and amorphization in Ge (Retraction of Vol 117, art no 055703, 2015)
Gomez-Selles, Jose L.; Claverie, Alain; Sklenard, Benoit; Benistant, Francis; Martin-Bragado, Ignacio
Multiscale Characterization of Nanoengineered Fiber-Reinforced Composites: Effect of Carbon Nanotubes on the Out-of-Plane Mechanical Behavior
Medina, Carlos; Fernandez, Eduardo; Salas, Alexis; Naya, Fernando; Molina-Aldereguia, Jon; Melendrez, Manuel F.; Flores, Paulo
Mechanical and Electrical Properties of Direct Spun Carbon Nanotube Fibers Exposed to Ultrahigh Temperatures in Vacuum
Zhang, Xiao-Shan; Yang, Ling-Wei; Liu, Hai-Tao; Zu, Mei
Construction of chelation structure between Ca2+ and starch via reactive extrusion for improving the performances of thermoplastic starch
Zhang, Shuidong; Lin, Zesheng; Jiang, Guo; Wang, Junsheng; Wang, De-Yi
Enabling high resolution strain mapping in zirconium alloys
Lunt, D.; Orozco-Caballero, A.; Thomas, R.; Honniball, P.; Frankel, P.; Preuss, M.; da Fonseca, J. Quinta
Effect of solutes on the rate sensitivity in Ti-xAl-yMo-zV and Ti-xAl-yMo-zCr beta-Ti alloys
Wang, C.; Li, N.; Cui, Y.; Perez-Prado, M. T.
Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads
Liu, Sai; Zhu, Deju; Li, Gaosheng; Yao, Yiming; Ou, Yunfu; Shi, Caijun; Du, Yunxing
On the quest for the strongest materials
LLorca, Javier
High-temperature conduction behavior of carbon nanotube fiber from 25 degrees C to 1100 degrees C
Zhang, Xiaoshan; Yang, Lingwei; Liu, Haitao
Demonstration of transmission high energy electron microscopy
Merrill, F. E.; Goett, J.; Gibbs, J. W.; Imhoff, S. D.; Mariam, F. G.; Morris, C. L.; Neukirch, L. P.; Perry, J.; Poulson, D.; Simpson, R.; Volegov, P. L.; Walstrom, P. L.; Wilde, C. H.; Hast, C.; Jobe, K.; Smith, T.; Wienands, U.; Clarke, A. J.; Tourret, D.
Insightful investigation of smoke suppression behavior and mechanism of polystyrene with ferrocene: An important role of intermediate smoke
Li, Zhi; Fernandez Exposito, Daniel; Jimenez Gonzalez, Alejandro; Wang, De-Yi
New Materials and Approaches for Advanced Optoelectronics
Coto, Pedro B.; Costa, Ruben D.
Peripheral Substitution of Tetraphenyl Porphyrins: Fine-Tuning Self-Assembly for Enhanced Electroluminescence
Charisiadis, Asterios; Bagaki, Anthi; Fresta, Elisa; Weber, Katharina T.; Charalambidis, Georgios; Stangel, Christina; Hatzidimitriou, Antonios G.; Angaridis, Panagiotis A.; Coutsolelos, Athanassios G.; Costa, Ruben D.
Large-Area Schottky Junctions between ZnO and Carbon Nanotube Fibres
Monreal-Bernal, Alfonso; Vilatela, Juan J.
Development of a Cr-Based Hard Composite Processed by Spark Plasma Sintering
Garcia-Junceda, A.; Saez, I.; Deng, X. X.; Torralba, J. M.
Structural design, preparation and characterization of light, isotropic and robust statically determined organic frameworks as reusable adsorbents
Yue, H-B.; Guo, J. W.; Fu, S. Q.; Li, X.; Wen, W. Q.; Jiang, W. Z.; Tong, R.; Haranczyk, M.
A numerical framework to analyze fracture in composite materials: From R-curves to homogenized softening laws
Herraez, M.; Gonzalez, C.; Lopes, C. S.
Spherical cobalt/cobalt oxide – Carbon composite anodes for enhanced lithium-ion storage
Patrinoiu, Greta; Etacheri, Vinodkumar; Somacescu, Simona; Teodorescu, Valentin S.; Birjega, Ruxandra; Culita, Dana C.; Hong, Chulgi Nathan; Calderon-Moreno, Jose Maria; Pol, Vilas G.; Carp, Oana
Effect of stereocomplex crystal and flexible segments on the crystallization and tensile behavior of poly(L-lactide)
Li, Xiaolu; Zhang, Xiuqin; Liu, Guoming; Yang, Zhongkai; Yang, Bo; Qi, Yue; Wang, Rui; Wang, De-Yi
Maximizing Volumetric Removal Capacity in Capacitive Deionization by Adjusting Electrode Thickness and Charging Mode
Santos, Cleis; Lado, Julio J.; Garcia-Quismondo, Enrique; Soria, Jorge; Palma, Jesus; Anderson, Marc A.
Processing of a new high entropy alloy: AlCrFeMoNiTi
Prieto, Estela; Calderon, Raquel De Oro; Konegger, Thomas; Gordo, Elena; Gierl-Mayer, Christian; Sheikh, Saad; Guo, Sheng; Danninger, Herbert; Milenkovic, Srdjan; Alvaredo, Paula
The effect of nylon nanofibers on the dynamic behaviour and the delamination resistance of GFRP composites
Garcia, Cristobal; Trendafilova, Irina; Zucchelli, Andrea; Contreras, Justin
In Silico Design of 2D and 3D Covalent Organic Frameworks for Methane Storage Applications
Mercado, Rocio; Fu, Rueih-Sheng; Yakutovich, Aliaksandr V.; Talirz, Leopold; Haranczyk, Maciej; Smit, Berend
Novel Dihydroxy-Containing Ammonium Phosphate Based Poly(Lactic Acid): Synthesis, Characterization and Flame Retardancy
Jian, Rong-Kun; Xia, Long; Ai, Yuan-Fang; Wang, De-Yi
Revealing the Effect of Local Connectivity of Rigid Phases during Deformation at High Temperature of Cast AlSi12Cu4Ni(2,3)Mg Alloys
Bugelnig, Katrin; Germann, Holger; Steffens, Thomas; Sket, Federico; Adrien, Jerome; Maire, Eric; Boller, Elodie; Requena, Guillermo
Crack propagation in TRIP assisted steels modeled by crystal plasticity and cohesive zone method
Dakshinamurthy, Manjunath; Ma, Anxin
Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
Cruzado, A.; Lucarini, S.; LLorca, J.; Segurado, J.
Self-powered pressure sensor based on the triboelectric effect and its analysis using dynamic mechanical analysis
Garcia, Cristobal; Trendafilova, Irina; Guzman de Villoria, Roberto; Sanchez del Rio, Jose
Enhanced microwave-absorbing property of precursor infiltration and pyrolysis derived SiCf/SiC composites at X band: Role of carbon-rich interphase
Yang, Lingwei; Liu, Haitao; Zu, Mei
Interfacial growth of MOF-derived layered double hydroxide nanosheets on graphene slab towards fabrication of multifunctional epoxy nanocomposites (vol 330, pg 1222, 2017)
Pan, Ye-Tang; Wan, Jintao; Zhao, Xuanliang; Li, Cheng; Wang, De-Yi
Hierarchical nanoporous silica doped with tin as novel multifunctional hybrid material to flexible poly (vinyl chloride) with greatly improved flame retardancy and mechanical properties (vol 295, pg 451, 2016)
Pan, Ye-Tang; Trempont, Cedric; Wang, De-Yi
White perovskite based lighting devices
Bidikoudi, M.; Fresta, E.; Costa, R. D.
Fitting electron density as a physically sound basis for the development of interatomic potentials of complex alloys
Ortiz-Roldan, Jose M.; Esteban-Manzanares, Gustavo; Lucarini, Sergio; Calero, Sofia; Segurado, Javier; Montero-Chacon, Francisco; Rabdel Ruiz-Salvador, A.; Hamad, Said
Research Progress on Micro-mechanical Property of Continuous Fiber-reinforced Ceramic Matrix Composites
Liu Hai-Tao; Yang Ling-Wei; Han Shuang
When Fluorescent Proteins Meet White Light-Emitting Diodes
Fernandez-Luna, Veronica; Coto, Pedro B.; Costa, Ruben D.
Composites of Proteins and 2D Nanomaterials
Demirel, Melik C.; Vural, Mert; Terrones, Mauricio
Biobased Epoxy Resin with Low Electrical Permissivity and Flame Retardancy: From Environmental Friendly High-Throughput Synthesis to Properties
Li, Cheng; Fan, Hong; Aziz, Tariq; Bittencourt, Carla; Wu, Linbo; Wang, De-Yi; Dubois, Philippe
Impact response of basalt textile reinforced concrete subjected to different velocities and temperatures
Liu, Sai; Zhu, Deju; Ou, Yunfu; Yao, Yiming; Shi, Caijun
Coupling nonlinear beams and continua: Variational principles and finite element approximations
Romero, Ignacio
Bio-Materials for Light Management
Costa, Ruben D.
Synergistic Effect of Graphene Oxide and Mesoporous Structure on Flame Retardancy of Nature Rubber/IFR Composites
Wang, Na; Zhang, Miao; Kang, Ping; Zhang, Jing; Fang, Qinghong; Li, Wenda
Experimental and computational study of diffusion mobilities for the bcc phase in the Fe-Al-(Si, Mn) systems
Zheng, Weisen; Wang, Jingya; He, Yanlin; Lu, Xiao-Gang; Li, Lin
Thermodynamic Evaluation of the Co-Al-C System by Coupling Ab Initio Calculations and CALPHAD Approach
Zheng, Weisen; He, Shuang; Wang, Jingya; Mao, Huahai
Experimental Diffusion Research on BCC Ti-Al-Sn Ternary Alloys
Wu, Qiaojun; Wang, Jingya; Gu, Yuanyu; Guo, Yanhua; Xu, Guanglong; Cui, Yuwen
Structure mediation and ductility enhancement of poly(L-lactide) by random copolymer poly(D-lactide-co-epsilon-caprolactone)
Zhang, Xiuqin; Yin, Yongai; Song, Yan; Li, Xiaolu; Dong, Zhenfeng; Wang, Rui; Wang, De-Yi
Influence of phenylphosphonic amide on rheological, mechanical and flammable properties of carbon fiber/RTM6 composites
Zhao, Xiaomin; Zhang, Lu; Picon Alonso, Juan; Delgado, Sofia; Martinez-Miranda, M. R.; Wang, De-Yi
Adhesion enhancement of DLC hard coatings by HiPIMS metal ion etching pretreatment
Santiago, J. A.; Fernandez-Martinez, I.; Wennberg, A.; Molina-Aldareguia, J. M.; Castillo-Rodriguez, M.; Rojas, T. C.; Sanchez-Lopez, J. C.; Gonzalez, M. U.; Garcia-Martin, J. M.; Li, H.; Bellido-Gonzalez, V.; Monclus, M. A.; Gonzalez-Arrabal, R.
Microstructure and compression strength of Co-based superalloys hardened by gamma ‘ and carbide precipitation
Carton-Cordero, Marta; Campos, Monica; Freund, Lisa P.; Kolb, Markus; Neumeier, Steffen; Goeken, Mathias; Torralba, Jose M.
A carbon nanotube integrated microfluidic device for blood plasma extraction
Yeh, Yin-Ting; Lin, Zhong; Zheng, Si-Yang; Terrones, Mauricio
Core-shell flame retardant/graphene oxide hybrid : a self-assembly strategy towards reducing fire hazard and improving toughness of polylactic acid
Jing, Jian; Zhang, Yan; Fang, Zheng-Ping; Wang, De-Yi
Locally Induced Spin States on Graphene by Chemical Attachment of Boron Atoms
Li, Qing; Lin, Haiping; Lv, Ruitao; Terrones, Mauricio; Chi, Lifeng; Hofer, Werner A.; Pan, Minghu
Assessment of atomic mobility for BCC Ti-Mn and Ti-Al-Mn alloys
Dong, Hao; Wang, Jingya; Xu, Guanglong; Zhou, Lian; Cui, Yuwen
Integrated Computational Materials Engineering in Solar Plants: The Virtual Materials Design Project
Montero-Chacon, Francisco; Chiumenti, Michele; Segurado, Javier; Doblare, Manuel
Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu
Yang, L. W.; Wang, C. Y.; Monclus, M. A.; Lu, L.; Molina-Aldareguia, J. M.; Llorca, J.
Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design (vol 91, pg 484, 2016)
Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J.
Discrete dislocation dynamics simulations of dislocation-theta ‘ precipitate interaction in Al-Cu alloys
Santos-Guemes, R.; Esteban-Manzanares, G.; Papadimitriou, I.; Segurado, J.; Capolungo, L.; LLorca, J.
Effect of anisotropy on the mechanical properties of polyurethane foams: An experimental and numerical study
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
Light-emitting electrochemical cells based on inorganic metal halide perovskite nanocrystals
Aygueler, Meltem F.; Puscher, Bianka M. D.; Tong, Yu; Bein, Thomas; Urban, Alexander S.; Costa, Ruben D.; Docampo, Pablo
Novel Ligand and Device Designs for Stable Light-Emitting Electrochemical Cells Based on Heteroleptic Copper(I) Complexes
Fresta, Elisa; Volpi, Giorgio; Milanesio, Marco; Garino, Claudio; Barolo, Claudia; Costa, Ruben D.
Hybrid titania-based multilayered photoelectrode for superior low temperature dye-sensitized solar cells
Serrano, Elena; Sepulveda, Angel; Lalinde, Elena; Berenguer, Jesus; Costa, Ruben; Garcia Martinez, Javier
Growth competition between columnar dendritic grains – Cellular automaton versus phase field modeling
Pineau, A.; Guillemot, G.; Tourret, D.; Karma, A.; Gandin, Ch. -A.
A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy
Rodriguez-Veiga, A.; Bellon, B.; Papadimitriou, I.; Esteban-Manzanares, G.; Sabirov, I.; LLorca, J.
Lattice kinetic Monte Carlo modeling of germanium solid phase epitaxial growth
Gomez-Selles, J. L.; Darby, B. L.; Jones, K. S.; Martin-Bragado, I.
Two-pheromone Ant Colony Optimization to design dispersed laminates for aeronautical structural applications
Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Mayugo, J. A.; Costa, J.
Dimensional consistency achieved in high-performance synchronizing hubs
Garcia, P.; Campos, M.; Torralba, J. M.
Dynamic deformation of high pressure die-cast magnesium alloys
Dudamell, N. V.; Galvez, F.; Perez-Prado, M. T.
Modeling of Incommensurate omega Structure in the Zr-Nb Alloys
Tang, Bin; Cui, Y. -W.; Chang, Hui; Kou, Hongchao; Li, Jinshan; Zhou, Lian
Influence of hygrothermal aging on the mechanical properties of Nylon 12 composites processed by selective laser sintering
Seltzer, R.; Segurado Escudero, J.; de la Escalera Cutillas, F. Martin
Quantification of hardening in Fe-Mn master alloys prepared by a mechanical alloying process via nanoindentation experiments
Sicre-Artalejo, Jose; Campos, Monica; Molina-Aldareguia, Jon M.; Torralba, Jose M.
Tearing and Delaminating of a Polymer Laminate
Kao-Walter, S.; Walter, M.; Dasari, A.; Leon, A.
VIRTUAL MECHANICAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
LLorca, Javier; Gonzalez, Carlos
Continuum modeling of {10(1)over-bar2} twinning in a Mg-3%Al-1%Zn rolled sheet
Jerusalem, A.; Fernandez, A.; Perez-Prado, M. T.