The doctoral thesis of Jingya Wang, entitled “High throughput investigation of diffusion and solid solution hardening of HCP Mg alloys”, has obtained the Award of the Technical University of Madrid to the best doctoral thesis. The thesis was advised by Prof. J. LLorca and Prof. Y. Cui and it was

The project ENTENTE (European Database for Multiscale Modelling of Radiation Damage) has started on the 1st of September 2020 and it will last 48 months. The aim of this project is to design a new European experimental/modelling materials database to collect and store highly-relevant data on

The current design of composite materials follows a trial and error approach based on an expensive and time consuming testing pyramid that costs industry millions of euros and years of development each time a new composite material is introduced in an aircraft. In this video, you can watch how we

There is an ever-increasing interest in new materials that can extend the current performance of battery electrodes materials in terms of longer cyclability, higher energy density and higher power density. Our research groups have established a route for the fabrication of highperformance anodes for

Flame retardant (FR) additives are commonly used to improve fire-safety of synthetic polymers, which are widely employed in manufactured consumer goods. The incorporation of a FR in a polymer typically leads to deterioration of its mechanical properties. It also manifests itself in a non-negligible

The use of polymer-based composite materials in aircraft structures has increased consistently in the last decades and today they represent up to 50% in weight for wings, fuselage sections and tail surfaces in the latest generation of commercial aircrafts. However, the use of such composites in

One of the current scientific and technological trends in structural composites is the incorporation of new functionalities as thermal/electrical conductivity or energy harvesting capacities to classical laminates. However, the inclusion of any internal conductive layer with capacitive storage will

Mg is a biocompatible and biodegradable metal with osteopromotive capabilities that is beginning to be used for bone repair and fixation in biomedical applications. Mg elastic modulus and density are closer to bone than those of other metallic alloys used in  biomedical applications (stainless

Magnesium has a large potential for more sustainable transport applications due to its low density. However, its poor strength and ductility limits its widespread application. The main fundamental problem arises from the low critical resolved shear stress (CRSS) for basal slip in Mg, which induces

There are situations in which the mechanical response of a material is coupled with relevant physical phenomena occurring in parallel. Some examples are chemomechanical problems in which mechanical fields interact with the evolution of the local composition, as it happens during the deformation

The fatigue performance of a metallic alloy is strongly influenced by its microstructure, especially in the crack nucleation regime. Micromechanics based fatigue modeling [1] is the appropriate tool to account for this influence. In this framework, fatigue life is obtained from a fatigue indicator

Fibre-reinforced polymers are extensively used in the automotive, aerospace and energy industries for structural applications. The interest in Liquid Composite Molding (LCM) processes, for the production of composite materials has grown in the last years, especially in the vacuum assisted resin

The aim of the DELIGHTED project is to gain fundamental understanding of principles of microstructural design for engineering of perspective austenitic lightweight steels to reach the combination of mechanical and performance properties suitable for applications. To read more about the scientific

It has been shown that InP semiconductor nanowires carry charge and excitons efficiently and also exhibit very high optical efficiency. Their mechanical properties are extremely important, as mechanical strain strongly influences the electric, optical and magnetic properties. However, this

The Multi-FAM project proposes the combination of materials with different functionalities, the additive manufacturing process by direct laser deposition (DED) and thermodynamic and process simulation, as enabling technologies to obtain multi-material and multifunctional 3D parts for direct

We are helping ITP Aero to produce the IPT (Intermediate Pressure Turbine) casing for the future Rolls-Royce UltraFan engine. So far, we have carried out the characterisation of the behaviour of the astroloy at containment and impact. Read more here.

Our colleague María Teresa Pérez Prado has been appointed as a member of the International Advisory Board of the European Space Agency (ESA). She will support the Agency as part of the Physical Sciences Working Group, particularly concerning their activities on micro-gravity research

What will happen to “I+D+I” when the pandemic ends? Find out in the 9 #reflexionesciencia webinars that begin on April 30! https://sites.google.com/view/reflexiones-transversales/

In the light of the last events related to the COVID-19 situation in both Spain and Europe we are very sorry to inform you that we have decided to cancel the EMMC17 meeting in Madrid. It is a very sad situation since the conference pointed to be a great success! www.emmc17.org

During the Minerals, Metals & Materials Society (TMS) Annual Meeting of 2020, which took place in San Diego, (California, USA), Damien Tourret, Resarcher at the IMDEA Materials Institute, was awarded The Young Leaders Professional Development Award. This award provides an opportunity for

We received a high-level visit from Madrid Regional Government past Friday 21st of February, proof of their commitment to science and technology R&D.