Influence and mechanism of ultrafast laser-textured Cu substrate on wetting behavior of SAC305 solder
Variant selection and macrozone in Ti-6Al-4V walls during laser hot wire direct energy deposition
Understanding the effect of pre-sintering scanning strategy on the relative density of Zr-modified Al7075 processed by laser powder bed fusion
Phase-field modeling and computational design of structurally stable NMC materials
The effects of CNT type, alignment and dopants on piezoresistance in CNT fibres
Slip transfer and crack initiation at grain and twin boundaries during strain-controlled fatigue of solution-hardened Ni-based alloys
Bi-metallic electrochemical deposition on 3D pyrolytic carbon architectures for potential application in hydrogen evolution reaction
Prof. Dr. De Yi Wang Receives Honorary Professorship from Xi’an Jiaotong University
IMDEA Materials’ Principal Researcher, Prof. Dr. De Yi Wang, has been awarded an Honorary Professorship by China’s Xi'an Jiaotong University during a special ceremony held at the Institute. In presenting the honour, the university’s President, Prof. Zhang Liqun, highlighted Prof. Wang’s
IMDEA Materials Institute and ArcelorMittal strengthen collaboration with new strategic agreement
IMDEA Materials Institute and ArcelorMittal have signed a strategic agreement aimed at advancing the development of sustainable solutions and technologies based on materials science and engineering for the steel industry. This agreement, which consolidates a preexisting relationship spanning more
Innovation in Structural Health Monitoring in the aerospace sector: IMDEA Materials and new advances after the DOMMINIO project
• The European DOMMINIO project has concluded with significant advances in the development of cutting-edge sensors and digital twins.• Now, IMDEA Materials is preparing for the launch of the COMPSTLAR project: the next step in the use of advanced composite materials in the aerospace
Schiff base approach to introduce chitosan-phytic acid complex for flame-retardant cotton fabrics
IMDEA Materials seeks to strengthen scientific and technological collaboration with China to drive innovation
The Director of IMDEA Materials Institute, Prof. José Manuel Torralba, has highlighted the opportunities to expand collaboration between Spanish research centres and Chinese organisations with the aim of boosting both countries’ R&D&I sectors. His remarks followed China's Education
Seminar by Dr. Beata M. Szydlowska from IMDEA Nanoscience, entitled “Liquid Phase Exfoliation” – on Monday, December 9th, 2024, at 10:15 AM, in the Auditorium.
Abstract: Since the graphene discovery and its introduction as a wonder material followed by the Nobel Prize awarded in 2010, graphene has attracted the excitement of the scientific community around the world. In last two decades, the interest was focused not only on exploring graphene’s
The Supermaterials That Will Transform Our Lives in 2025
Philipp Tur/Shuterstock José Manuel Torralba, IMDEA MATERIALS Silicon anode batteries made from nanomaterials; recyclable carbon nanotubes; lab-created living tissues and organs… The impact of supermaterials on our lives has already begun. Health is the field where the evolution of
Perspective on non-Hermitian elastodynamics
FYA of Ángela García de la Camacha Díaz entitled “Design and fabrication of multimaterial bioresorbable scaffolds by 3D printing for osteochondral tissue regeneration” – Friday, December 13, 2024, at 12:00 PM in the Auditorium
Abstract: Tissue engineering and regenerative medicine are being investigated as therapeutic options for diseases involving cartilage and bone damage in osteochondral tissue. In addition, it represents a significant challenge to develop scaffolds to deal with osteochondral lesions due to the
New members of the IMDEA Materials Institute team – November 2024
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Juan Carlos Babón Molina. I am a chemist from
Laura Rosso
Aroa Mascaraque
Ruofan Yang
Mohammad Zarghami
IMDEA Materials joins forces in the establishment of an Additive Manufacturing and Advanced Materials Competence Centre
Additive manufacturing is revolutionising aerospace by enabling the decentralisation of production and the use of innovative material designs. In order to accelerate R&D and knowledge transfer in this sector, the University of Cyprus (UCY) will establish an Additive Manufacturing and Advanced
IMDEA Materials seeks to catalyse green energy production via catalysis and energy materials – Industria Química
The trade publication, Industria Química, has highlighted IMDEA Materials' research into catalytic processes through the Institute's new Catalysis and Energy Materials research group, led by Prof. Dr. habil. Harun Tüysüz. You can read the complete article (original content in Spanish), here.
IMDEA Materials aims to catalyse chemical transformation and green hydrogen production with its new Catalysis and Energy Materials research group
IMDEA Materials Institute can now count on a new tool in its arsenal for ever-more sustainable materials development, with the formation of a cutting-edge research group set to advance the field of photo- and electro-catalysis. The Catalysis and Energy Materials (CEM) research group, led by Dr.
Engineering Higher-Order Topological Confinement via Acoustic Non-Hermitian Textures
The PhD defense of Maral Sareban, titled “Grain Boundaries in Mg: Formation During Solidification and Their Influence on Deformation”, will take place on Wednesday, November 29th, at 11:00 AM in the Sala Verde at UPM
The dissertation, titled "Grain Boundaries in Mg: Formation During Solidification and Their Influence on Deformation", has been supervised by Prof. Javier LLorca and Dr. Alberto Orozco Caballero. The PhD defense will take place in the Sala Verde of ETSICCP (Escuela Técnica Superior de Ingenieros
This is how the fire resistance of electric vehicle batteries is tested – La Razón
The Spanish publication La Razón has highlighted the new capabilities of the IMDEA Materials Institute in the field of material testing for batteries intended for electric vehicles. You can read the article here (original content in Spanish).
Workshop on “Materials for Better Defense” – December 5th, 2024
On December 5th, IMDEA Materials will host the workshop “Materials for Better Defense”, an event designed for those interested in discovering how advanced materials are transforming the world of defense. Five experts from IMDEA Materials will lead the session: Dr. Juan José Vilatela, Dr. Johan
FYA of Ana Inés de Isidro entitled “Metamaterial Fibers of Intercalated Bundles”– Monday, December 9, 2024 at noon in the Auditorium.
Abstract: Continuous fibers of carbon nanotube intercalation compounds (CNTIC) feature aligned carbon nanotubes with intercalated species forming extended domains of periodic intercalation. Introducing intercalants into carbon nanotubes (CNTs) enhances bulk fiber conductivity to levels comparable
IMDEA Materials Institute to explore innovation for the future of defence technology
Experts from the fields of materials science and engineering are set to gather at IMDEA Materials Institute to discuss the innovative technologies and materials with the potential to transform the defence sector The 'Materials for a Better Defence' workshop will take place on December 5 and will
Alejandro Ortega
Bio-derived modified halloysite nanotubes as eco-friendly flame retardants to endow epoxy with high thermal stability, mechanical performance and flame retardancy
Prof. Javier LLorca and researcher Biaobiao Yang recognised in the Annual Awards of the International Magnesium Society
• Prof. LLorca received the ‘Annual Award’, the highest honour given by the society, for his advances in understanding microstructure deformation in wrought magnesium alloys. • This is the second consecutive year that researchers associated with IMDEA Materials have been honoured by the society,
Xuesong Liu
Qi Chen
Meihui Zhou
Yunhuan Liu
In Spanish first, IMDEA Materials Institute unveils advanced fire-safety testing capabilities for battery casings
IMDEA Materials Institute has taken a major step forward in advanced fire safety testing with the installation of cutting-edge equipment capable of testing battery casings under extreme conditions. The new capability, known as ‘torch and grit’ testing, allows IMDEA Materials to perform rigorous
Carbon nanofiber orientation influences bacterial adhesion under flow conditions
Precontouring as a Tool to Improve the Laser Powder Bed Fusion Printability of Inconel939 Thin Walls
Investigating non fluorescence nanoparticle transport in Matrigel-filled microfluidic devices using synchrotron X-ray scattering
A New Way to Study Sound Wave Propagation in Topological Metamaterials – Phys.org
The online science publication Phys.org has highlighted the work of researchers, including those from IMDEA Materials Institute, who have taken a novel approach to studying the interaction between certain topological metamaterials and sound wave propagation. The technique, described by Dr. Johan
Researchers unveil new method for studying sound wave propagation in topological metamaterials
Researchers from IMDEA Materials and IMDEA Nanoscience, in collaboration with the Materials Science Institute of Madrid (ICMM-CSIC) and Nanjing University, have taken a novel approach to studying the interaction between certain topological metamaterials and sound wave propagation. The technique,
Pre-contouring to improve the compatibility of Inconel939 with Laser Powder Bed Fusion – METAL AM
3D Printing publication METAL AM has highlighted the work of researchers from IMDEA Materials Institute, Madrid, Spain and ITP Aero that looks at the use of contour scanning to improve thin wall sections when Additive Manufacturing with Inconel 938. The research, 'Precontouring as a Tool to
AEMAC meeting promotes interaction between industry and research entities – JEC Composites
JEC Composites has highlighted the role of the IMDEA Materials Institute as the host of the latest AEMAC Meeting, which brought together industry leaders and researchers to address key challenges in the field of composite materials. You can read the original article, here.
(SOLAR-MATER) Year-Round, Fire-Safe, and Sustainable Solar Management Materials
Project details Funding: MSCA Postdoctoral Fellowships 2023. HORIZON-MSCA-2023-PF-01 Project coordinator: IMDEA Materials Project period: 01/11/2024 – 31/10/2026 IMDEA Materials' researchers Supervisor: Prof. De-Yi Wang Fellow: Dr. Wei Cai Abstract At present, temperature regulation of
Prediction of mechanical and flame-retardant properties of MOF-loaded polymer composites
Seminar by Prof. André Phillion from McMaster University, Canada, entitled “Modelling of Continuous Casting of Steel: Nozzle Clogging, Alloy Segregation, and Semi-solid Deformation” – on Thursday, November 21st, 2024, at noon, in the auditorium.
Abstract: Accurate prediction of continuous casting defects is key for cost-efficient processing of new steel grades that meet the needs of modern transportation and energy applications. This presentation will review recent efforts at McMaster University to develop a suite of fundamental models
Plasmonic Nanocomposite for Visible Light-Modulated Bimorph-Actuator
(BAT4FIRE) SYNERGISTIC SOLUTIONS TO ENHANCING FIRE-SAFETY ON BATTERY SYSTEMS FOR E-MOBILITY
Project details Funding: Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI)Project coordinator: TolsaProject period: 01/09/2024 – 31/08/2027 IMDEA Materials' researchers Dr. Maciej HaranczykDr. De-Yi Wang Abstract Currently, the market of
Luis Calero
New members of the IMDEA Materials Institute team – October 2024
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Valerio Lampitella, I am from Naples, Italy. I
Eugenio Oñate, President of the IMDEA Materials Board of Trustees, Receives the 2024 Leonardo Torres Quevedo National Award in Engineering and Architecture
Professor Eugenio Oñate, President of the IMDEA Materials Board of Trustees, has witnessed remarkable advancements and challenges in computational mechanics over nearly 50 years. But more than an observer, the researcher at the Polytechnic University of Catalonia (UPC) and founder of the
Eugenio Oñate, president of IMDEA Materials’ Board of Trustees, receives the Leonardo Torres Quevedo National Award in Engineering and Architecture
Prof. Eugenio Oñate, President of the IMDEA Materials Board of Trustees, has witnessed remarkable advancements and challenges in computational mechanics over nearly 50 years. But more than an observer, the Polytechnic University of Catalonia (UPC) researcher and founder of the International
Aqueous Supercapacitor with Wide-Temperature Operability and over 100,000 Cycles Enabled by Water-in-Salt Electrolyte
Carbon nanotubes, the second assault of the ‘small things’ revolution – ABC Empresa
ABC Empresa has highlighted the work of IMDEA Materials in the field of carbon nanotubes (CNTs), with journalist Alberto Velázquez speaking with Dr. Juan José Vilatela, leader of the Institute's Multifunctional Nanocomposites research group. You can read the original article in ABC Empresa, here
Seminar of Prof. Nima Haghdadi from the Imperial College in London, entitled “Microstructure design in multi-phase metallic materials via additive manufacturing” – November 22nd, 2024, at noon, in the Auditorium.
Abstract: Thermal gradients during metals additive manufacturing (AM) generate non-equilibrium and complex microstructures, particularly in multi-phase materials. Hence, most current adoptions of AM by various industry sectors continue to rely on alloys with a single dominating matrix phase only.
SEMIT is born: a new scientific society to boost regenerative medicine and tissue engineering in Spain
In the context of scientific development in Spain, a new initiative has emerged aimed at advancing the field of Tissue Engineering and Regenerative Medicine (TERM). The Spanish Society for Regenerative Medicine and Tissue Engineering, or SEMIT, was founded with the objective of promoting
How IMDEA Materials Institute is helping MAD Formula Team compete in engineering and motorsports
The excitement and adrenaline of the racetrack may seem worlds away from studying for a PhD in the labs of a scientific institute like IMDEA Materials. However, research engineer Adrián Cotobal has managed to bridge these two seemingly different worlds through his participation in Formula Student
Fire retardancy of epoxy composites: A comparative investigation on the influence of porous structure and transition metal of metal-organic framework
Green superhydrophobic surface engineering of PET fabric for advanced water-solvent separation
High-throughput screening of MoNbTaW-based Refractory High-Entropy Alloys through Direct Energy Deposition in-situ alloying
Paper-Like 100 % Si Nanowires Electrodes Integrated with Argyrodite Li6PS5Cl Solid Electrolyte
A variational method for the simulation of hydrogen diffusion in metals
The preparation of ammonium polyphosphate@ nickel/cobalt-layered double hydroxide and its application as flame retardant in thermoplastic polyurethane
Collagen-based 3D printed poly (glycerol sebacate) composite scaffold with biomimicking mechanical properties for enhanced cartilage defect repair
Jinyi Huang
Shuai Tang
Petronela Chovancova
Sreelakshmi Vinod
Vittoria Squartecchia
Henry Summers
Researchers from Spanish universities, awarded the National Research Awards 2024 – Crue
The Spanish Universities publication, Crue, has highlighted the recognition of the President of the Board of IMDEA Materials, Prof. Eugenio Oñate, as the winner of the National Leonardo Torres Quevedo Award in Engineering and Architecture 2024. You can read the full article, here (original
(ZINCHRONOUS) TALENTO CÉSAR NOMBELA
Project details Funding: Comunidad de Madrid Project coordinator: IMDEA MATERIALES Project period: 01/02/2024 – 31/01/2029 IMDEA Materials' researchers Mónica Echeverry Abstract The strategy in Zinchronous will consist of different stages in which Zn-alloys will be selected based on
Searching for the perfect alloy – System Failure (RNE)
The program System Failure on Radio 3, RNE, has interviewed our director, Prof. José Manuel Torralba, about how artificial intelligence can be used to develop more efficient and sustainable alloys, thereby revolutionizing the world of materials. You can listen to the complete interview, here.
Top of the class: IMDEA Materials Institute researchers highlighted among Stanford University’s annual list of world’s top scientists
IMDEA Materials Institute has been well represented once again on Stanford University’s list of the world’s top 2% Scientist Rankings. Notably, IMDEA Materials’ Scientific Director, Prof. Javier LLorca, becomes one of the top 200 ranked scientists worldwide in the Materials Science field. "Two
Regulating Local Coordination Sphere of Ir Single Atoms at the Atomic Interface for Efficient Oxygen Evolution Reaction
FYA of Raul de Armas entitled “Computational thermodynamics and kinetics of inorganic nanowire growth”– Monday, October 14, 2024 at 10:30 am in the Seminar Room.
Abstract: The growth of nanowires (NWs) has become a well-established method, with numerous techniques used to synthesise hundreds of different NWs, the most common being chemical vapour deposition (CVD) via the vapour-liquid-solid (VLS) mechanism. In contrast, floating catalyst chemical vapour
FYA of Frank Lopes entitled “Inorganic Nanowires Synthesis by Floating Catalyst Chemical Vapor Deposition”– Friday, October 11, 2024
Abstract: This work focuses on the synthesis of silicon and tin sulfide nanowires using floating catalyst chemical vapor deposition (FCCVD). Suspended in the gas phase, one-dimensional inorganic nanoparticles, such as nanotubes and nanowires, rapidly grow to hundreds of microns within seconds,
The reasons why Elon Musk uses stainless steel for his Starship spacecraft – La Nacion
The Argentine newspaper La Nación has republished the article by our Director, Prof. José Manuel Torralba, on the reasons why Elon Musk uses stainless steel for his Starship spacecraft instead of more modern and lighter materials. You can read the original article, here (content in Spanish).
New members of the IMDEA Materials Institute team – September 2024
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Eduardo Roque. I am from Cáceres (Spain). I did my
Why Elon Musk uses stainless steel for his new spacecraft
José Manuel Torralba, IMDEA MATERIALES In a recent recorded conversation between Adam Burrows, an astrophysics professor at Princeton, and Elon Musk, Burrows expressed surprise at SpaceX's choice to use stainless steel for the Starship spacecraft. Instead of opting for more “aerospace”
Silicon nanowire aqueous dispersions for processing into macroscopic network materials
Seminar by Alicia Moya from Inorganic Chemistry Department, UAM, entitled “Designing Covalent Organic Framework (COF) for Photocatalytic Water Remediation and Clean Energy Applications” – on October 28, 2024, at 12:00 AM, in the Seminar Room.
Abstract: Covalent Organic Frameworks (COFs) represent a unique class of crystalline, porous materials with highly tunable structures. In recent years, COFs have gained significant attention due to their potential in environmental remediation and clean energy production, particularly in
(BIOCOMAT) ENHANCING BIOAVAILABILITY OF BENEFICIAL POLYPHENOLIC COMPOUNDS IN FOOD VIA ADVANCED MATERIALS ENGINEERING
Project details Funding: MSCA Postdoctoral Fellowships 2023. HORIZON-MSCA-2023-PF-01Project coordinator: IMDEA Materials Project period: 01/10/2024 – 30/09/2026 IMDEA Materials' researchers Supervisor: Dr. Maciej HaranczykFellow: Sabina Lachowicz-Wiśniewska Abstract A diet rich
(AM2C3) ADDITIVE MANUFACTURING AND ADVANCED MATERIALS COMPETENCE CENTRE IN CYPRUS
Project details Funding: HORIZON-WIDERA-2023-ACCESSProject coordinator: University of Cyprus Project period: 01/10/2024 – 30/09/2027 IMDEA Materials' researchers Dra. María Teresa Pérez-Prado Abstract Advancing capabilities and elevating the profile of the University of Cyprus
‘Exceptional results’: DELIGHTED praised for delivering significant advances in the production of lightweight, high-strength steel alloys
THE IMDEA Materials-coordinated DELIGHTED project has been praised for delivering “exceptional results” in its successful efforts to develop Advanced High-Strength Steels (AHSS) for lightweight vehicle applications. The comments were contained within the European Commission’s (EC) final report on
Design, Performance, and Mode of Action of Hyperbranched Fire Retardants: Advancement and Perspective
BIOMET4D takes centre stage at Workshop on Additive Biofabrication 2024 at IMDEA Materials
BIOMET4D was heavily featured as part of the recent Workshop on Additive Biofabrication (WAB2024) held at IMDEA Materials Institute, Madrid. WAB2024 was the inaugural workshop of its kind, and was organised by researchers at the host institute, IMDEA Materials (also coordinators of the BIOMET4D
Seminar by Dr. Manuel A. Fernández-Rojo from the National Center for Cardiovascular Research (CNIC) in Madrid and the University of Queensland, Australia, entitled “Dietary Regulation of Liver Regeneration” – on October 3, 2024, at 12:00 PM, in the Seminar Room.
Abstract: Elevated mortality in liver transplantation-waiting list, clinical complications and scarcity of paediatric liver-donors warrant alternatives to liver transplant for treating paediatric-chronic liver diseases (CLD). Liver’s unique intrinsic capacity to regenerate damaged tissue
Challenges and opportunities in composite materials: IMDEA Materials hosts upcoming Business-Academia Collaboration Meeting
IMDEA Materials has solidified its position as a leading center in composite material development by hosting the upcoming Business-Academia Collaboration Meeting The event, organised by the Spanish Association of Composite Materials (AEMAC), will take place on October 17, aims to foster
Influence behavior and mechanism of double-layer Gr stacking configuration on mechanical strength and thermoelectric transport properties of Cu/Gr composites
High strength low alloy steel joint fabricated by laser welding with real-time high-frequency resistance heating
PhD Defense of Carmen Martínez entitled “High-throughput computational strategies to discover new catalysts for the Hydrogen Economy including elastic strain engineering» – On Wednesday, October 2nd at 11:OO am
The defense of the Doctoral Thesis will take place in the “Salón de Grados” from the Faculty of Chemical Sciences of the Complutense University of Madrid. The dissertation is titled «High-throughput computational strategies to discover new catalysts for the Hydrogen Economy including elastic
The inaugural workshop on additive biofabrication in Spain to be held at IMDEA Materials
IMDEA Materials Institute is set to host the first-ever Workshop on Additive Biofabrication (WAB2024), a pioneering event in Spain that will bring together international experts in the field in Madrid. Organised by five of the institute’s researchers, the workshop, which will take place over the
Iridium Single-Atom-Ensembles Stabilized on Mn-Substituted Spinel Oxide for Durable Acidic Water Electrolysis
Carbon nanotube yarn-based sensors set to transform aircraft structural health monitoring
IMDEA Materials researchers have led a groundbreaking study into the development of novel carbon nanotube (CNT) yarn-based strain sensors for the structural health monitoring (SMH) of airframe components. SHM provides a critical assessment of component in-service performance and integrity and is
Short fatigue crack growth and retained austenite in steels processed via quenching and partitioning
Fire-safe materials in the spotlight as Prof. Dr. De-Yi Wang named IMDEA Materials’ first European Academy of Sciences Fellow
Senior IMDEA Materials Researcher, Prof. Dr. De-Yi Wang, believes his election as a European Academy of Sciences (EurASc) Fellow reflects the growing importance of flame-retardant and fire-safe materials in the engineering community. Prof. Wang is the first IMDEA Materials researcher to be
(OCPI IMDEA MATERIALES 2024 – 2025) OCPI IMDEA MATERIALES 2024 – 2025
Project details Funding: Ministerio de Ciencia, Innovación y Universidades. Agencia Estatal de Investigación. Project coordinator: IMDEA MATERIALESProject period: 01/01/2024 – 31/12/2025 IMDEA Materials' researchers Rosa Bazán Abstract The Research Personnel Recruitment Office
(NoDiSonics) No dissipation in sonic flatlands
Project details Funding: Ministerio de Ciencia, Innovación y Universidades. Agencia Estatal de Investigación. Unión Europea. PRTRProject coordinator: IMDEA MATERIALESProject period: 01/07/2023 – 30/06/2025 IMDEA Materials' researchers Dr. Johan Christensen Abstract Sound waves
(CHOSEN-CAT) NANOSTRUCTURED HALIDE PEROVSKITES FOR SOLAR ENERGY CONVERSION AND ACCELERATION OF CATALYTIC TRANSFORMATIONS
Project details Funding: Ministerio de Ciencia e Innovación. Agencia Estatal de InvestigaciónProject coordinator: IMDEA MATERIALESProject period: 01/09/2024 – 31/08/2027 IMDEA Materials' researchers Dr. Harun Tüysüz Abstract Continued development of active, selective, energy
PhD Defense of Wei Shao, entitled “Accurate Prediction of Phase Diagrams of Binary Alloys from First-Principles Calculations and Statistical Mechanics” – On 20th September 2024 at 11:30 a.m.
The PhD defense will take place in the José Echegaray Room, School of Civil Engineering (E.T.S. de Ingenieros de Caminos), Polytechnic University. How to get there: Campus, Calle del Prof. Aranguren, 3, 28040 Madrid The dissertation is titled “Accurate Prediction of Phase Diagrams of Binary
Andrea Alonso Romero
Hari Narayanan Karuppaiya
BIOMET4D researcher turns to crowdfunding in his bid to master biomaterials and tissue engineering
Miguel Grande Ráez, one of the IMDEA Materials researchers involved in the European BIOMET4D project, has turned to the public for support as he aims to further his expertise in advanced materials science at Imperial College London. As part of BIOMET4D, Grande is working to develop artificial
Seminar by Dr. Sergio Pinilla from IMDEA Energy, entitled “Battery Simulations: Capabilities and Challenges” – on September 24, 2024, at 11:30 AM, in the Seminar Room.
Abstract: The use of computational modeling has been gaining relevance as a way to reduce cost, time and resources in the innovation process of the battery industry. There are many types of models with varying complexity and scale. However, what they all have in common is that their accuracy
Biomineralization of Electrospun Bacteria-Encapsulated Fibers: A Relevant Step toward Living Ceramic Fibers
Optimization Design of the Multidimensional Heterostructure toward Lightweight, Broadband, Highly Efficient, and Flame-Retarding Electromagnetic Wave-Absorbing Composites
Seminar by Prof. Emilio J. Palomares Gil from the Institute of Chemical Research of Catalonia (ICIQ), entitled “The Contact Makes the Device: Molecules that Rule the Solar Cells Efficiency”. On September 17, 2024, at 1:00 p.m., in the Auditorium.
Abstract: Silicon solar cells have dominated the science and market for solar cells. Their efficiency was boosted after the passivation of their surface and minimised charge losses at the interface, allowing better contacts to extract the photoelectrical current. In molecular solar cells,
PhD Defense of Venkatesh Sivagnana, entitled “Developing new high entropy alloys for high temperature applications using advanced powder metallurgy routes and additive manufacturing» – On Friday, September 13th at 11:30am
The PhD defence will take place in the "Padre Soler" Building (Leganés Campus) of the Carlos III University of Leganes (UC3M) The dissertation is titled «Developing new high entropy alloys for high temperature applications using advanced powder metallurgy routes and additive manufacturing». It
IMDEA Materials recognised in the latest Severo Ochoa and María de Maeztu accreditation ceremony
IMDEA Materials Institute has been recognised for its research excellence in the latest edition of the Severo Ochoa and María de Maeztu accreditations. The event, held at CaixaForum Madrid, was presided over by the Minister of Science and Innovation, Diana Morant, who highlighted "the profound
Toward 3D printability prediction for thermoplastic polymer nanocomposites: Insights from extrusion printing of PLA-based systems
BIOMET4D marks its second anniversary at this year’s Consortium and Stakeholder Advisory Board meetings
The Horizon Europe BIOMET4D project has marked the halfway point in its mission to develop the next generation of shape-shifting implants with its second consortium meeting in Dublin, Ireland.Aside from representing the significant milestone of the project's second anniversary, the meeting also
Ángel Martín
Silicon mediated twin formation in laser direct energy deposited 316L stainless steel
Alert Results Effect of carbon content on the corrosion behavior of Ni-Co-Cr-Mo-Cu alloys in both sulfuric and hydrochloric acids 1 of 3 Effect of carbon content on the corrosion behavior of Ni-Co-Cr-Mo-Cu alloys in both sulfuric and hydrochloric acids
Fabricate high-strength 7075 aluminum alloy joint through double pulse MIG welding process
Preparation of phosphorus-containing organic-hybrid layered double hydroxide as a flame retardant for thermoplastic polyurethane
Toward diverse polymer property prediction using transfer learning
A novel alloy design approach in developing CoNi-based high entropy superalloy using high entropy alloys thermodynamic and spark plasma sintering
The extended scaling laws of the mechanical properties of additively manufactured body-centered cubic lattice structures under large compressive strains
Confronting Spain’s enternal scientific brain drain – Miguel Grande speaks with RNE Audio
IMDEA Materials Institute researcher, Miguel Grande Ráez, has appeared on the program 'A golpe de bit Radio Exterior' on Spanish national radio to discuss his plans to study a Master's Degree in Imperial College London and to discuss the scientific brain drain confronting Spain. You can listen
New members of the IMDEA Materials Institute team – July and August 2024
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Pablo Varela, and I am from Chile. I have a
Preethi Ramesh
Pablo Varela
Yufei Liu
Archana Ravi
Jalal Ahmad
Sama Safarloo
(UTIFE) DEVELOPMENT AND CHARACTERISATION OF ULTRAFINE HIERARCHICALLY STRUCTURED EUTECTIC TI-FE-BASED ALLOYS USING ADDITIVE MANUFACTURING AND ADVANCED TOMOGRAPHIC TECHNIQUES
Project details Funding: MSCA Postdoctoral Fellowships 2023. HORIZON-MSCA-2023-PF-01 Project coordinator: IMDEA Materials Project period: 01/09/2024 – 31/08/2026 IMDEA Materials' researchers Supervisor: Dr. Federico Sket Fellow: Dr. JoAnn Ballor Abstract UTIFE aims at further
(SUSCOMPAUTO) ACCELERATED DEVELOPMENT OF SUSTAINABLE NANOCOMPOSITES THROUGH LABORATORY AUTOMATION AND MACHINE LEARNING
Project details Funding: Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI)Project coordinator: Fundación IMDEA MaterialesProject period: 01/09/2024 – 31/08/2027 IMDEA Materials' researchers Dr. Maciej HaranczykDr. De-Yi
Macromolecular piperazine/aluminum phosphate hybrid and its efficient intumescent flame retardant/thermal conductive polypropylene
Ahsan Kaleem
Paula Chonillo
IMDEA Materials researches how to improve 4D printing for its application in biomedical implants – La Vanguardia
Spanish newspaper La Vanguardia has highlighted IMDEA Materials' efforts in researching the development of 4D printing for its application in biomedical implants. You can read the original article (content in Spanish), here:
Polydopamine-primed FeCo-LDH endowed epoxy resin with enhanced flame retardancy and mechanical properties
On the limit behavior of lattice-type metamaterials with bi-stable mechanisms
Topology optimisation and lithography-based ceramic manufacturing of short-stem hip prostheses with enhanced biomechanical and mechanobiological performance
The Madrid genius in artificial organ creation relying on crowdfunding to enter a leading center – El Mundo
Spanish newspaper El Mundo has highlighted IMDEA Materials' researcher Miguel Grande and his efforts to raise the funding required to study a Master's Degree at Imperial College in London. To read the original article see (content in Spanish):
Model-based reinforcement learning control of reaction-diffusion problems
Designing of carbon nanohorn-based heterostructure for improved mechanical properties, flame retardancy, and hydrophobicity of composite aerogels
What’s Going on with Transparent Dental Aligners?
José Ignacio Delgado Castaño, IMDEA MATERIALS Transparent aligners have been the leading demand in orthodontics over the past decades. They do not compromise aesthetics, are more comfortable than traditional dental braces, and allow for better oral hygiene. Moreover, they are much less
Year in Review – IMDEA Materials Institute is pleased to launch its 2023 Annual Report
IMDEA Materials is delighted to announce the launch of our 2023 Annual report, available now on our website, here. This annual report is designed to give you an overview of the Institute and main achievements in 2023. You will also find a description of the current Research Programmes,
Seminar by Matthias T. Agne from University of Oregon, entitled “Engineering electronic and thermal transport in complex crystals” – on 5 of august, at 11:00am, 2024 in the Seminar Room.
Abstract: Next-generation energy and sustainability technologies, such as solid-state batteries, fuel cells and thermoelectrics, require a fundamental understanding of thermal, electronic and ionic transport of the constituent materials to realize successful devices. Although the transport of
Living machines and fire-safe energy storage on the horizon following latest Ramón y Cajal Fellowship call
Living machines for smart surgical devices, improved drug delivery systems, and fire-safe energy storage materials are among the potential scientific breakthroughs that could become reality in the not-so-distant future. That’s following the success of researchers Monsur Islam and Guang-Zhong Yin in
Seminar by Debadri Som from KU Leuven, entitled “The Synergy Between Metallurgical and Construction Sectors: Waste to Wealth” – on September 2, 2024, at noon, in the Seminar Room.
Abstract: The cement industry accounts for around 8% of anthropogenic carbon dioxide emissions today, while industries like copper and aluminum produce slags (residues) in the range of 100 million tons (approx.) annually. Do we have a possible synergy? Our group at KU Leuven tries to develop
FYA of Sofía Fernández entitled “Smart Digital Twins for Structural Composite Materials Manufacturing”– July 23rd, 2024
Abstract: Resin Transfer Moulding (RTM) is a cost-competitive manufacturing process for carbon fibre-reinforced polymer (CFRP) composites, used for structural applications that require lightweight design because of their enhanced properties. However, internal cavities and porosities appear at the
Summer bus timetable: August 1 – August 31, 2024
Please be aware that the regular L7 bus service from Getafe Central to IMDEA Materials Institute and the Tecnogetafe Technology Park will run on a reduced frequency from August 1 - August 31. The August timetable can be found below: Please note, the daily Atocha service provided by
Dr. Mónica Echeverry, First Junior PI at IMDEA Materials
IMDEA Materials Institute has taken a significant step in its commitment to innovation and the scientific development of young researchers by launching its new Junior Principal Investigator (Junior PI) program. This program enables postdoctoral researchers who have obtained competitive talent
What’s going on with transparent dental aligners? – IMDEA Materials in Yahoo! News
Yahoo! News has republished IMDEA Materials Institute researcher Ignacio Delgado's article from The Conversation España on dental aligners and the development of the next generation of materials for these important orthodontic devices. You can read the original article (content in Spanish), here.
The effect of κ-carbides on high cycle fatigue behavior of a Fe-Mn-Al-C lightweight steel
Seminar by Dikai Guan from the University of Southampton, entitled “Static recrystallisation behaviour in magnesium alloys” – on August 30th, 2024, at noon, in the Seminar Room.
Abstract: Magnesium alloys, known for their low density and high strength-to-weight ratio, are increasingly important in the aerospace and automotive industries. Understanding the static recrystallisation (SRX) behaviour of these alloys is crucial for optimizing their mechanical properties and
First-principles prediction of the Co-Al phase diagram including configurational, vibrational and magnetic contributions
A computational study of solidification kinetics in multicomponent alloys
Flame-retardant reinforced halloysite nanotubes as multi-functional fillers for PEO-based polymer electrolytes
Emilio Viciana, Regional Minister of Education, Science, and Universities, highlights cutting-edge research at IMDEA Materials
Yesterday, IMDEA Materials Institute had the honor of receiving a visit from Emilio Viciana, Regional Minister of Education, Science, and Universities of the Community of Madrid. During his tour of the facilities, Viciana praised the institute's work and emphasised the importance of its
Poly(vinyl alcohol) Composite Aerogel toward Lightweight, Remarkable Flame Retardancy, and Thermal Insulation Properties by Incorporating Carbon Nanohorns and Phytic Acid
How artificial intelligence is being used to design the implants of the future
At the forefront of medical innovation, implants have undergone a revolution in recent times thanks to artificial intelligence (AI). Nowadays, these devices are designed and optimised using advanced algorithms. However, conventional manufacturing techniques do not allow for patient
Will they sell cheap diamonds in Tiffany’s? – ABC.es
Spanish news outlet ABC.es has republished IMDEA Materials Institute Director, Prof. José Manuel Torralba's recent article in The Conversation Spain about a new, cheaper and more sustainable way to manufacture artificial diamonds. You can read the original article at ABC.es, here (content in
We will see cheap diamonds in Tiffany’s
José Manuel Torralba, IMDEA MATERIALS A diamond awakens a world of suggestions that can lead us, depending on our age, to a cabaret in Paris where Marilyn Monroe declares to the world that they are "a girl's best friend" (Gentlemen Prefer Blondes, Howard Hawks, 1953); to New York's Fifth Avenue,
Organic-inorganic hybrid modified the halloysite nanotube: Toward vinyl ester resin composites with enhanced flame retardance and mechanical property
New members of the IMDEA Materials Institute team – June 2024
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. My name is Jesús Jiménez and I am from Ávila (Spain). My
Seminar of Dr. Yunxian Yang from Beijing Institute of Technology entitled “Flame-retardant Polymer for Impact and Energy-absorbing Composite” – Monday, July 8th, 2024, at noon, in the Seminar Room.
Abstract: High-performance fiber-reinforced polymer composite have been increasingly used as personnel protection system owning to their high strength and/ or stiffness to weight ratio and good damage tolerance. Amongst, ultra-high molecular weight polyethylene (UHMWPE) fiber/ thermoplastic
Isomerism-enabling low-temperature ultrasensitive and moisture-resistant fire-alarming “Guarder” via color changing
Prof. Dr. Eugenio Oñate assumes Chairmanship of the Board of Trustees at IMDEA Materials Institute
IMDEA Materials Institute has announced a significant change in its leadership, with Prof. Dr. Eugenio Oñate assuming the role of Chairman of the Board of Trustees, succeeding Prof. Dr. Manuel Doblaré. Prof. Oñate, a renowned expert in computational mechanics and advanced materials and an
Seminar of Dr. Minghao Yu from Technische Universität Dresden, Germany – Thursday, June 27th, 2024, at 3:30 pm, in the Seminar Room.
Abstract: Electrochemical energy storage technologies have been brought into the spotlight as they provide elegant and efficient approaches to store, transport, and deliver energy harvested from sustainable energy resources.[1-2] The demand for power and energy supply is equally imperative in
Seminar of Prof. Suveen Mathaudu from Colorado School of Mines, USA entitled, “There is plenty of room at the bottom… For magnesium alloys!”– On Thursday, June 27th, 2024, at 11:00 am, in the Seminar Room.
Abstract: Mg-alloys are becoming increasingly important based on the technological advantages given their low density compared to current structural metals such as Al- and Fe-based alloys. However, unlike their fcc and bcc counterparts, little has been done to investigate the processing,
PhD Defense of Andres Sierra Soraluce, entitled “Microstructural design in martensitic stainless steels via quenching and partitioning to improve their mechanical properties.”
The PhD will take place on june 25th, 2024, at 11:30 am in salón de grados - padre soler building (leganés campus) of uc3m
Before Saving the World with Carbon Nanotubes, Do We Know if They Are Recyclable?
Anastasiia Mikhalchan, IMDEA MATERIALS They can replace CO²-intensive materials like copper, steel, and aluminum in the construction, aerospace, automotive, and other industries, and are also the global bet for an ongoing energy transition. Carbon nanotubes, filaments 2,000 times thinner than
Materials science in focus in IMDEA Materials’ 13th annual imaging contest
IMDEA Materials Institute recently celebrated its 13th annual imaging contest featuring images related to materials characterisation and processing, simulation and the institute's everyday activities. The most competitive category was "Materials Characterisation", which this year was won by
Seminar of Dr. Wenqing Yan from the Department of Civil, Environmental and Geomatic Engineering in ETH Zurich (Swiss), entitled “Oxygen-Tolerant Radical Polymerization Techniques and Macromolecule Design for Industrial Applications” – on June 27th, 2024, at 12:30 pm, in the Seminar Room.
Abstract: By utilizing innovative polymerization techniques involving zero-valent metals and UV light, we have developed radical polymerizations that exhibit low dispersity, high monomer conversion rates, exceptional oxygen tolerance, and minimal catalyst content. These advancements are crucial
IMDEA Materials leads groundbreaking research in topological metamaterials
Dr. Johan Christensen, leader of IMDEA Materials Institute’s Mechanical and Acoustic Metamaterials research group, is among the researchers behind a pioneering study exploring the topological properties of metamaterials. This latest research, Focusing micromechanical polaritons in
Cytocompatibility, cell-material interaction, and osteogenic differentiation of MC3T3-E1 pre-osteoblasts in contact with engineered Mg/PLA composites
Sergio Lucarini, an alumni of IMDEA and now a prominent researcher at BC Materials in Bilbao, will give a seminar entitled “Multiphysics Modeling for Multifunctional Composite Materials” on June 25th, 2024, at 10:30 AM in the Seminar Room.
Abstract: Recent advances in multifunctional materials are revolutionizing various fields, such as biomedicine, soft robotics and smart sensors. The ability to model and predict the behavior of these materials in different physical interactions is crucial. In this regard, multiphysics modeling is
Fabrication of multi-dimensional heterostructure towards highly efficient microwave absorbing performance and flame retardancy
Hot-Isostatic Pressed Al Melt-Spun Ribbons with Tailored Microstructures and Mechanical Properties for Metallic Optics
IV edition of the AEMAC composites meeting to be organised by IMDEA Materials – Industria Química
Online trade publication Industria Química has highlighted the fact that IMDEA Materials Institute will host AEMAC's upcoming biannual meeting on industrial and academic collaboration in Madrid. The 4th edition of the meeting will take place on the 17th of October. You can read the full article
Dr. Jiří Červenka from the Institute of Physics of the Czech Academy of Sciences will give a seminar entitled ‘Electrolyte and Electrode Design for Next Generations of Batteries’ on June 24th, 2024, at noon in the Seminar Room.
Abstract: Electrochemical energy storage systems with high energy density, safety, affordability, and a low carbon footprint are essential in today’s world of widespread electronics, electric vehicles, and grid storage. Li-ion batteries have become the leading rechargeable battery technology,
Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: In-situ characterisation and phase-field modelling
A new therapy could save the lives of patients who have suffered an acute myocardial infarction – Crónica Norte
Crónica Norte has highlighted the role of IMDEA Materials Institute in the Cardioboost-CM project, coordinated by the National Centre for Cardiovascular Research (CNIC). You can read the original article following the link below (content in Spanish):
(PD-MPEA) PHASE DIAGRAM OF MULTIPRINCIPAL ELEMENT ALLOYS
Project details Funding: MSCA Postdoctoral Fellowships 2023. HORIZON-MSCA-2023-PF-01Project coordinator: IMDEA Materials Project period: 16/06/2024 – 15/06/2026 IMDEA Materials' researchers Supervisor: Dr. Javier LlorcaFellow: Chenying Shi Abstract MultiPrincipal Element Alloys
I will win the Nobel Prize in 2034 for a hydrogen car that costs 500 euros – El País
Spanish newspaper El País has highlighted the participation of IMDEA Materials Institute researcher, Carmen Martínez Alonso in the recent Madrid-wide 3 Minute Thesis competition, in which she was the winner of the 'Science' category. You can read the full story here (original content in
Seminar of Prof. Sudesh Sivarasu from the University of Cape Town (South Africa), entitled “Developing impactful medical technologies in international contexts” – on June 21st, 2024, at 11:00 am, in the Seminar Room.
Abstract: Professor Sudesh Sivarasu leads the University of Cape Town (UCT) MedTech laboratory. Prof Sivarasu is one of the best known in the field of medical device innovation both nationally and internationally. He has been named a prolific inventor by UCT Research Contracts and Innovation and
Joule Heating in Controlled Atmospheres to Process Nanocarbon/Transition Metal Oxide Composites and Electrodes
Combined Gleeble physical welding simulation and low-cycle thermo-mechanical fatigue for heat-affected zone material for 9Cr steel: Experimental testing and through-process model
IMDEA Materials welcomes largest cohort of MSU students yet as part of ongoing research collaboration
IMDEA Materials has recently welcomed the latest group of students from Michigan State University (MSU) as part of the continuing research and educational collaboration between the two institutions. This year’s intake of MSU pre-graduates is the largest to date, with 10 students set to spend the
Seminar of Alejandro stratchan the Reilly Professor of Materials Engineering at Purdue University and the Co-Director of nanoHUB and chipshub, entitled “Physics-based modeling, machine learning, and cyber-infrastructure accelerating materials research and innovation” – on June 25th, 2024, at noon, in the seminar room.
Abstract: Predictive machine learning (ML) tools can accelerate the discovery of new materials and enable semi or fully autonomous research. In addition, ML tools are playing an increasingly central role in physics-based simulations, enabling a combination of accuracy and computational efficiency
Carmen Martínez, from IMDEA Materials, wins the audience award at Falling Walls Lab Madrid
On Friday, May 31, the prestigious 3MT competition of Falling Walls Lab Madrid took place at the headquarters of the Spanish National Research Centre (CSIC). For the second consecutive year, the event’s Public Choice Award was won by an IMDEA Materials researcher, in this case, Carmen Martínez
The Congress that almost wasn’t and ended in success
Organisers of the 19th European Mechanics of Materials Conference (EMMC19) have heralded its success in putting IMDEA Materials Institute on the map in the mechanics of materials field. The event, held last week over three days at the Technical University of Madrid (UPM), was organised by IMDEA
The thrill of undergraduate research with Spartans in Spain – MSU Today
MSU Today, the newspaper of Michigan State University, has highlighted the ongoing research collaboration between the two institutions in an interview with MSU student, Teancum Piekkola. Teancum is one of 10 MSU students currently undertaking three-month research stays at IMDEA Materials
An FFT based approach to account for elastic interactions in OkMC: Application to dislocation loops in iron
Seminar of Prof. Kavan Hazeli from the University of Arizona (USA), entitled “Musicale Phenomena in Additively Manufactured Lattice and Thin-Wall Structures” – on June 4th, 2024, at 12:30 pm, in the Seminar Room.
Abstract: To this end, full-field mesoscale computational modeling of statistical volume elements and calibration and validation experiments provide a pathway for establishing microstructure-property relationships in additively manufactured parts. However, the fidelity of these relationships is
BIOMET4D featured at the 19th European Mechanics of Materials Conference in Madrid
BIOMET4D researcher, Dr. Jon Molina from IMDEA Materials Institute, has highlighted the BIOMET4D project as part of his keynote address at last week's European Mechanics of Materials Conference (EMMC19) in Madrid. Dr. Molina's presentation was focused on the 4D printing of metallic alloys toward
Seminar of the Dr. Lluis Montoliu, from the CSIC Research Scientist and Deputy Director at the National Centre for Biotechnology, entitled “Not Everything is Possible in Science! The Fundamental Role of Ethics in Research” – on June 28th, 2024, at noon, in the Auditorium.
Abstract: Often the society thinks researchers can do almost everything they want. They imagine that we can convert immediately all our ideas into experiments, even the silliest and strangest ones, without telling anyone or asking permission. And this far from being true. Actually, researcher's
Seminar of Rodrigo Martinez, Associate Professor of Mechanical Engineering, from the School of Health Research, entitled “Architecting Carbonaceous Electrodes” – on June 26th, 2024, at noon, in the Seminar Room
Abstract: Carbonaceous electrodes are a cornerstone of multiple applications ranging from sensors to energy components. There are multiple ways to derive carbonaceous electrodes, including a myriad of precursor materials and processing techniques. In this talk, I will first give a quick overview
Seminar of Prof. Mengying Liu from Washington and Lee University in the US, entitled “In situ investigation of hydrogen-assisted crack initiation in nickel-based alloy 725”. On May 27th, 2024, at noon in the seminar room.
Abstract: When metals are exposed to hydrogen (H)-rich environments, they may lose ductility and fail catastrophically without showing any sign of damage. This problem is known as hydrogen embrittlement (HE). Over the last few decades, extensive research on HE has shown that hydrogen-assisted
IMDEA Materials Institute’s Expert Insight Series – Martin Otto, Leibniz Institute for Solid State and Materials Research
IMDEA Materials Institute was pleased to recently host a guest seminar from Martin Otto from the Leibniz Institute for Solid State and Materials Research, on Fe-Mn-C steels for biodegradable vascular implant applications. We took the opportunity to speak with him about his latest work in this
IMDEA Materials welcomes visit from Málaga’s Sierra Blanca
Yesterday, IMDEA Materials Institute received a visit from 12 students from the Sierra Blanca School in Malaga. During their visit they were able to hear the experiences of Estela Izquierdo, Project Management Assistant, and Dr. Mónica Echeverry, Senior Postdoctoral Researcher, about scientific
