Katherine Oyeri
A fully variational numerical method for structural topology optimization based on a Cahn-Hilliard model
Understanding the effect of tailored heat treatment on Zr-modified Al7075 fabricated by laser powder bed fusion
Mechanistic insights into mechanical behavior of MOF-polymer membranes
High-performance bio-based epoxy vitrimers with tunable thermal, mechanical properties and recyclability
An Extraterrestrial “S”: the First Metal Part 3D-Printed in Space
José Manuel Torralba, IMDEA MATERIALS The first “part” ever printed in space was a very thin rod shaped like an “S”. The “S” is a simple shape, but it poses some difficulty because it involves two changes in curvature. We could almost say it was a 2D print. But months later, a revolutionary
ACBICI (A Configurable BayesIan Calibration and Inference package)
Software details Software authors Christina Schenk, Ignacio Romero Intellectual Property Rights Copyright © Fundación IMDEA Materiales and Universidad Politécnica de Madrid. All rights reserved Opportunity Software license. Reference Publication
FYA of Yufei Liu entitled “Efficient Steel Creep Behavior Prediction with Bayesian-Calibrated Models” – Friday, 12th September 2025 at noon in the Seminar Room
Abstract: Creep is the slow, continuous deformation of a material under constant stress, especially at high temperatures. Accurately identifying its parameters remains a critical challenge in materials science. This work focuses on calibrating these parameters using a Bayesian calibration method
World Electric Vehicle Day – RTVE highlights IMDEA Materials spin off Floatech
Radiotelevision Española (RTVE) has visited the headquarters of IMDEA Materials' spin off, Floatech, highlighting the company's work in developing next-generation silicon anodes for electric vehicles and batteries. Floatech was featured as part of RTVE's coverage of World Electric Vehicle Day. You
IMDEA Materials researchers achieve controlled assembly of silicon nanowires into macroscopic networks
Researchers at IMDEA Materials Institute have developed a pioneering method to assemble silicon nanowires into ordered, macroscopic networks: a key step toward expanding their industrial applications. Silicon nanowires offer exceptional energy storage capacity, electrical conductivity, and
(KESADIAS) KINETICS-ENABLED SUSTAINABLE ALLOY DESIGN VIA INNOVATIVE ATOMISTIC SIMULATIONS
Project details Funding: Consolidación Investigadora 2024Project coordinator: IMDEA Materials Project period: 01/10/2025 – 31/03/2027 IMDEA Materials' researchers Dr. Damien Tourret Abstract Historically, metallic alloys have been developed by experimental
PhD Defense of Ignacio Rodríguez Barber, entitled “Laser powder bed fusion of Inconel 939: from parameter optimization to microstructural design” – On This Friday, 12 September at 11:00 AM
The PhD defence will take place in Sala 3.S01.08, Edificio Biblioteca Rey Pastor, Universidad Carlos III – Campus de Leganés. It has been advised by Director: Dr. María Teresa Pérez Prado and Academic Tutor: Prof. Mónica Campos Gómez. Here is the University address:Universidad Carlos III –
Silicon nanowires self-assemble into macroscopic networks for advanced materials – Phys.org
Online publication Phys.org has highlighted IMDEA Materials' pioneering work into the assembly of silicon nanowires into ordered, macroscopic networks: a key step toward expanding their industrial applications. You can find the original publication, here.
Seminar of Prof. Paraskevas Kontis, Associate Professor at the Norwegian University of Science and Technology entitled “Atomic-scale engineering for crack-free additively manufactured superalloys.” On September 19th at noon in the seminar room.
Abstract: The presence of minor grain boundary solutes such as boron and zirconium can have significant consequences for the production of superalloys using additive manufacturing methods. On the one hand, their presence in the bulk chemistry is crucial for achieving the required mechanical
Robotics and artificial intelligence: a new method to develop perfect materials – La Región
La Región Ourense has published its latest article with IMDEA Materials researcher, Prof. José Manuel Torralba on the trending topic of robotics and artificial intelligence in developing new and improved materials. You can find the original article, here.
Seminar by Prof. Pere Barriobero, Ramón y Cajal researcher at the Polytechnical University of Catalonia, entitled “Real-time monitoring of engineering alloys under manufacturing and service conditions” – on September 11th, 2024, at 12:00 PM, in the Seminar Room.
Abstract: Optimizing the performance of engineering alloys during manufacturing and service conditions requires a keen understanding of their microstructure evolution under applied temperature and load. It is thus a challenging task, because under the influence of an external load and/or
Adrián Cotobal Gómez
Aircraft materials inspired by sea urchin skeletons
Lucía Doyle, IMDEA MATERIALS Building an aircraft is a task that must be thought out in detail. Its materials must meet strict requirements in terms of mechanical strength, performance, and weight reduction, in addition to other functions such as acoustic and thermal insulation. To simultaneously
Seminar by Prof. Ana Inés Gómez de Castro entitled “Ultraviolet radiation, nanomaterials and the investigation of the origin of life.” – On September 17, at noon, in the seminar room.
Abstract: Ultraviolet (UV) radiation is efficiently absorbed by the atmosphere of the Earth and its relevance and usefulness in materials processing has been often disregarded being this type of studies relegated to astrophysics and space science and exploration. In this seminar, two examples of
How to tackle a $10 million-$1 billion bottleneck: building smarter tools for faster, more efficient drug and materials discovery
How can we accelerate discovery in materials science and drug development while dealing with limited data and resource constraints? That is the question at the heart of BENEFICIARY, a new project at IMDEA Materials Institute that seeks to develop more intelligent and adaptable machine learning
Seminar by Prof. Marie A. Charpagne from the University of Illinois at Urbana-Champaign, entitled “Metastable alloys by design” – on Monday, September 1st, at 11:00am, in the Auditorium.
Abstract: Additive manufacturing (AM) is revolutionizing how we synthesize, produce, and use metallic materials. However, out of hundreds of commercially available engineering alloys, only a handful are readily printable. This arises from the extreme heating and cooling rates associated with AM,
Optimization of phosphate-based plasma electrolytic oxidation coatings on commercially pure zinc
A molecular dynamics study of chemistry-inspired nanoporous aluminum structures
The Community of Madrid funds studies on materials for engineering applications through IMDEA – Europa Press
Europa Press has reported on the recent visit of Emilio Viciana, Councillor for Education, Science, and Universities of the Community of Madrid, to IMDEA Materials Institute. During his visit, Councillor Viciana had the opportunity to see first-hand IMDEA Materials’ latest innovations and
Sequential control of catalyst alloying and oxygen-mediated nucleation for continuous synthesis of SnO nanowires floating in the gas phase
Triazole-mediated phosphorus-containing protective coating for cotton fabric: excellent flame retardancy and smoke suppression performance
Multifunctional NGF-loaded PLGA microsphere-PCL/GelMA scaffold enables coordinated osteo-neuro-vascular regeneration via PI3K/AKT pathway activation
Parity Metamaterials and Dynamic Acoustic Mimicry
Melt pool overlap as a key tool for microstructure design in PBF-LB/M of a Ni-based superalloy: Empirical and analytical approaches
IMDEA Materials researchers propose practical pathway for microstructure control in 3D-printed Ni-based superalloys
Andrew Johnston Researchers at IMDEA Materials Institute have developed a streamlined and industrially scalable methodology to design and control microstructure in nickel-based superalloys manufactured by laser powder bed fusion (LPBF), a key additive manufacturing process. Specifically, the
Influence of temperature and architecture on the amplitude and frequency of serrations in additively manufactured Inconel718 lattices
Mg-Zn-Ca alloys for biodegradable medical implants. Part I: Effects of zinc and calcium on mechanical and corrosion behavior and cytocompatibility
How the cooling blanket that went viral on TikTok works – La Nacion
Argentinian publication La Nacion has republished the article from The Conversation Spain, authored by IMDEA Materials researcher Lola Martín Alonso, on the effectiveness of the popular "cooling blankets" currently achieving fame on social media. You can read the full article (original content
A consistent finite-strain thermomechanical quasi-nonlinear-viscoelastic viscoplastic constitutive model for thermoplastic polymers
IMDEA Materials Develops Method for Targeted Microstructure Control in 3D-Printed Superalloys – 3Printr
The online publication 3Printr has highlighted IMDEA Materials' ongoing research into targeted microstructure control in 3D-printed superalloys, led by Dr. Maria Teresa Pérez Prado and Ignacio Rodríguez Barber. You can read the full article here:
Anomalous strain hardening via manipulating basal/pyramidal dislocation interactions in the Mg-Y-Ca alloy
Utilizing highly porous mycelium based materials as a sustainable supporter for form-stable organic PCMs
The new generation of researchers: meet the participants of IMDEA Materials’ 2025 Research Initiation program
Every year, the IMDEA Materials Institute offers talented university students the opportunity to take their first steps into the world of scientific research through its Research Initiation Scholarships (RIF). For three months, participants join cutting-edge research groups, develop real
IMDEA Materials launches a new line in bioinspired, smart, and living biomaterials
IMDEA Materials Institute has welcomed Prof. Andrés Díaz Lantada as a new Principal Investigator and leader of the research line on Bioinspired, Smart, and Living Materials. With this appointment, the Institute strengthens its ‘Materials for Health’ area and reaffirms its commitment to
Do the viral cooling blankets on TikTok actually work?
María Dolores Martín Alonso, IMDEA MATERIALS TikTok has an uncanny ability to turn everyday objects into viral miracles. One day it’s a cream that erases wrinkles in seconds, the next it’s a blanket that promises cool nights without air conditioning. “Cooling blankets” are the algorithm’s
Phonon-mediated superconductivity in magic-strain bilayer graphene
IMDEA Materials and the Technical University of Madrid bring open-source medical device innovation to Peru
Peru has hosted the first-ever international design school in the Americas focused on open-source medical devices, thanks to a unique collaboration between IMDEA Materials Institute, the Technical University of Madrid (UPM), and the University of Piura. Held as part of the University of Piura’s
Triethylenetetramine-modified ammonium polyphosphate as charring agent for enhanced flame retardancy in ethylene vinyl acetate copolymer
Multidimensional performance evaluation of flame-retardant composites in warm mixed asphalt binders based on rheological properties and aging effects
IMDEA Materials researchers pioneer 3D-printed carbon scaffolds for improved bone regeneration
In a breakthrough for regenerative medicine, a new study from IMDEA Materials Institute researchers has demonstrated the potential of 3D-printed carbon microlattices as structurally tunable scaffolds for bone tissue engineering. Specifically, the scaffolds were fabricated using 3D-printed
Laser powder bed fusion of an Fe-based metallic glass using time delays
IMDEA Materials Institute researchers reveal how fabrication and surface treatment affect corrosion in bioabsorbable metals
• Researchers from IMDEA Materials, in conjunction with the Helmholtz-Zentrum Hereon Institute of Surface Science and Meotec GmbH, have undertaken the first-ever comparison of corrosion resistance in magnesium (Mg) and zinc (Zn) bioalloys produced by extrusion and additive manufacturing.• The study,
Fire-safety testing capabilities for battery enclosure materials
Available tests and benefitsFire testing for planar materials designed to be evaluated as battery enclosure components under extreme thermal and mechanical conditions. The primary test types include:Torch fire-only exposure (baseline thermal resistance)Combined torch & grit cycles (simulated
As the ATENEA programme prepares to launch, existing MSCA fellows share their experiences at IMDEA Materials Institute
With the launch of the ATENEA programme, an ambitious initiative offering international postdoctoral fellowships in materials science and engineering, IMDEA Materials Institute is further cementing its role as a hub for scientific excellence and international talent. ATENEA is funded
PhaseFieldX: an open-source tool for simulating material fracture and fatigue, developed at IMDEA Materials
The Python package PhaseFieldX, developed by researcher Miguel Castillón at IMDEA Materials Institute, was recently published in the Journal of Open Source Software (JOSS). This computational tool, based on the FEniCSx platform, is designed to simulate fracture and fatigue in materials using the
PhD Defense of Yuyao Liu, entitled “Development of 3D-printed biodegradable polymer scaffolds for osteochondral tissue engineering” – On July 23rd, 2025 at 11:00 AM.
The PhD defence will take place in the Leonardo Torres Quevedo Room, Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos (UPM).How to get there: Campus, Calle del Prof. Aranguren, 3, 28040 MadridThe dissertation is titled “Development of 3D-printed biodegradable polymer scaffolds
“With a team like this, it’s very hard to fail”: Prof. José Manuel Torralba reflects on his time as Director of the IMDEA Materials Institute
Having concluded his term as Director of IMDEA Materials, Prof. José Manuel Torralba takes “a very positive view” of the achievements made during his tenure. After four years at the helm, Prof. Torralba recently stepped down from the role, which has since been taken on by his former Deputy
Can metals be 3D printed in space? – La Región Ourense
In his latest article in La Región Ourense, Prof. José Manuel Torralba, Principal Investigator at IMDEA Materials, discusses the possibilities of 3D printing metals in space. You can read the complete article (original content in Spanish), here.
¿Se pueden imprimir metales en el espacio? – La Región Ourense
En su último artículo en La Región Ourense, el investigador principal de IMDEA Materiales, el Prof. José Manuel Torralba, habla sobre las posibilidades de imprimir metales por 3D en el espacio. Puedes leer el artículo original, aquí.
Streamlining material degradation testing: collaborative robotics for specimen monitoring
Understanding elemental distribution in Cu/Mo-added Fe2Ni2CrMn high-entropy alloys processed by laser powder bed fusion
Fabrication of fire-retarded epoxy asphalt composites with compatibilization and toughening for road tunnel pavements
Researchers reveal how fabrication and surface treatment affect corrosion in bioabsorbable metallic alloys – Phys.org
The online publication Phys.org has highlighted IMDEA Materials Institute's groundbreaking research into how extrusion and additive manufacturing processes affect the corrosion resistance of certain magnesium and zinc alloys. You can read the original article, here.
An open-source tool to simulate material fracture and fatigue – La Vélez
The magazine La Vélez has featured IMDEA Materials researcher Miguel Castillón for the development of his new computational tool to simulate material fracture and fatigue: PhaseFieldX. You can read the complete article (original contents in Spanish), here.
FYA of Rafael Thomey entitled “Investigating and Addressing Degradation Mechanisms in 100% Silicon Nanowire Anodes for Lithium-Ion Batteries”– Wednesday, July 23, 2025 at noon in the auditorium.
Abstract: This thesis investigates key challenges in the development of next-generation lithium-ion batteries by using a fully silicon-based nanowire anode as a model system. The work focuses on understanding the mechanisms responsible for capacity fading—such as SEI instability, mechanical
Pyrolytic Carbon Microlattices from 3D-Printed Polyethylene Glycol Diacrylate and their In Vitro Assessment for Bone Regeneration
Experimental Observation of k-Dependent Bulk-Edge Correspondence in Sonic Semimetals with High Winding Numbers
Jon Molina, new Director of IMDEA Materials in Getafe – Cadena SER
Cadena SER Madrid Sur has featured the new Director of IMDEA Materials, Prof. Jon Molina, and his plans to continue driving the growth of the institute. You can read the original article, here.
PLA/Boron nitride blending as support materials to fabricate PEG based form stable phase change materials
Playing in the Champions League of international research: IMDEA Materials charts bold course for the future
Over the course of nearly two decades, Prof. Jon Molina has seen IMDEA Materials Institute grow from little more than a “bold vision” into a world-leading materials science research centre. Yet, having come so far already, from being that vision in 2007, to gather more than 130 researchers from
IMDEA Materials to lead ATENEA, a European postdoc programme for industrial efficiency and sustainability
IMDEA Materials Institute has officially launched the ATENEA programme, a wide-ranging international postdoctoral initiative funded under Horizon Europe’s prestigious Marie Skłodowska-Curie Actions (MSCA) programme. Over the next four years, ATENEA will offer ten 30-month fellowships to
Halide Perovskite Photocatalysts for Solar Energy Harvesting: Concept, Major Advances, and Challenges
A low frequency seismic triboelectric energy nano-generator used in slow and higher ground motion
(SAFE-BIOBATT) FIRE-SAFE AND BIO-BASED POLYMER ELECTROLYTES FOR NEW GENERATION LITHIUM-SULFUR BATTERIES
Project details Funding: MSCA Postdoctoral Fellowships 2023. HORIZON-MSCA-2023-PF-01Project coordinator: IMDEA Materials Project period: 01/02/2025 – 31/01/2027 IMDEA Materials' researchers Supervisor: Dr. De-Yi WangFellow: Sunan Tian Abstract Low ionic conductivity
(IMMMPACCT) INTEGRATING MULTISCALE MODELING OF METAL PRINTING WITH ADVANCED CALIBRATION AND CHARACTERIZATION TECHNIQUES
Project details Funding: MSCA Postdoctoral Fellowships 2023. HORIZON-MSCA-2023-PF-01Project coordinator: IMDEA Materials Project period: 01/10/2024 – 30/09/2026 IMDEA Materials' researchers Supervisor: Dr. Damien TourretFellow: Valerio Lampitella Abstract Binder
(MIM-TBC) MICROSTRUCTURE-INFORMED NUMERICAL FRAMEWORK FOR PREDICTING THE RESPONSE OF TBC SYSTEM
Project details Funding: MSCA Postdoctoral Fellowships 2023. HORIZON-MSCA-2023-PF-01Project coordinator: IMDEA Materials Project period: 01/09/2024 – 31/08/2026 IMDEA Materials' researchers Supervisor: Dr. Javier SeguradoFellow: Mohammad Jalili Abstract Among
Materials science in focus in IMDEA Materials’ 14th annual imaging contest
IMDEA Materials recently celebrated our 14th annual Scientific Imaging Contest, featuring images related to materials characterisation, processing, simulation, as well as daily life at the Institute. This year's contest also featured an Art in Science category, as well as the opportunity to
Year in review: our 2024 Annual Report is now available
We are pleased to announce the launch of IMDEA Materials' 2024 Annual Report. The full document can be viewed here. This report is designed to provide an overview of the Institute and its main achievements during 2024. It also includes a description of the current Research Programmes,
Experimental and Theoretical Insights into the Role of Iron in the Rapidly Fabricated Ni/Fe Electrodes for the Oxygen Evolution Reaction
Solid-State Thermal Decomposition in a Cu-Rich Cu-Ti-Zr Alloy
Processing and microstructure of bioresorbable Zn/Mg multi-materials manufactured by additive friction stir deposition
Seminar by Dra. Maria Crespo-Ribadeneyra from Queen Mary University of London, entitled “Na-ion batteries: from materials sustainability to operando characterisation techniques” – on July 4th, 2025, at 11:00, in the Seminar Room.
Abstract: Sodium ion batteries (SIBs) are a potential alternative to diversify the energy landscape, beyond Lithium-ion batteries (LIBs), due to their similar storage mechanism and easy technology transfer. Currently, the benchmark anodes for SIBs are hard carbons (HCs), since sodium ions do not
Methods for fabricating high-performance and lightweight lithium-ion batteries based on silicon and CNTs
Patent details Status US patent application filed, PCT extension. Inventors (IMDEA Materials Institute): Afshin Pendashteh and Juan José Vilatela García. Application number 63/625,641, PCT/US25/13097 Applicant William Marsh Rice University and
Bio-based inorganic-organic materials
Patent details Status Spanish patent filed. Inventors De-Yi Wang, Wei Tang, José Agustín Hobson and Yunhuan Liu. Application number P202430817 Applicant IMDEA Materials Institute Priority date 10/10/2024 Transfer
Seminar by Dr. Sven Vogel from Los Alamos National Laboratory, entitled “Metallurgical Studies with the HIPPO Diffractometer at Los Alamos Neutron Science Center” – on June 27th, at 12:00, in the Seminar Room.
Abstract: Advantages of neutron diffraction for metallurgical studies are highlighted with research examples performed on the High Pressure – Preferred Orientation (HIPPO) diffractometer at the Los Alamos Neutron Science Center (LANSCE). We give a brief introduction of neutron diffraction and an
IMDEA Materials Institute and Shanghai Jiao Tong University forge strategic research partnership
A new Memorandum of Understanding (MoU) between IMDEA Materials Institute and China’s National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), will serve to promote academic and research collaboration between the two institutions. NERC-LAF is a research centre of China’s
Origin of the serrated flow and anomalous strength evolution in the severe plastic deformed 2195 Al-Li alloy
Seminar by Natividad Gomez Cerezo from Universidad Complutense de Madrid, entitled “Nanostructured materials: applications in energy and biomedicine” – on June 20th, 2025, at 11:30, in the Seminar Room (SS floor).
Abstract: Energy: H2 production The development of TiO₂-based photocatalysts modified with palladium for efficient hydrogen (H₂) production under UV-visible and visible light irradiation has been explored. By combining high-surface-area mesoporous TiO₂ with small amounts of Pd, the researchers
Combining μ-MRI with cellular automata simulation for an improved insight into cell growth within scaffolds
Thermoplastics for Clear Aligners: A Review
Living Materials: Exploring the Frontier Between the Living and the Non-Living – Yahoo Noticias!
Yahoo Noticias! has highlighted the latest article from IMDEA Materials Institute Principal Investigator, Prof. Andrés Díaz Lantada, on exploring the frontier between living and non-living materials. You can read the article in Yahoo Noticias!, here (original content in Spanish).
Living Materials: Exploring the Frontier Between the Living and the Non-Living
Concept of a knee prosthesis created with AI from a lattice inspired by living organisms. IMDEA Materials, CC BY. Andrés Díaz Lantada, IMDEA MATERIALS Talking about a living material might sound a bit strange. We’re used to concrete, steel, plastics, marble, or aluminium, which are clearly not
A five-terminal ITO transistor enabling memory, artificial synaptic behaviors, and logic operations
Carboxymethyl chitosan-based composite film for fire warning under high humidity conditions with wireless signal transmission
Effectively enhancing the fire resistance and mechanical properties of basalt fiber/epoxy composites utilizing a novel piperazine phosphonate flame retardant
Effects of flame-retardant nanocomposite combined with warm mix asphalt techniques on molecular conversion and fire safety
Advances in reticular materials for flame retardant polymers
High-vacuum laser treatments enhance strength, ductility and fatigue limit of additively manufactured stainless steel
Kuldeep Shivaji Parade Patil
3D Printing Continuous Fiber Reinforced Polymers: A Review of Material Selection, Process, and Mechanics-Function Integration for Targeted Applications
Search Alert Results An energy-stepping Markov Monte Carlo method An energy-stepping Markov Monte Carlo method
Seminar by Prof. Subodh Kumar. from Indian Institute of Science, Bangalore, entitled “Improving Formability of Mg Alloys, and Improving Mechanical Properties, Self-Healing and Recycling of Polymer Composites.” – on June 16th, at 12:00, in the SS Seminar Room.
Abstract: Cast Mg alloys have found many applications and current focus of research is on wrought Mg alloys. One major challenge in this effort is poor formability of Mg alloys. In this talk, I will present the results of current research work in my group to improve formability of AM30 Mg alloy
Fully Fabric Triboelectric Nanogenerators Based on SWCNH-Coated Cotton Fabric/UHMWPE: IoT Sensing
Preferential grain boundary migration during annealing of cold-rolled pure Ni investigated by in-situ EBSD
Smart electrolyte offers dual protection against thermal runaway in lithium-ion batteries
IMDEA Materials researchers have made an important breakthrough in improving the safety of lithium-ion batteries (LIBs), powering everything from smartphones to electric vehicles. In a bid to address the risks posed by thermal runaway, a dangerous failure mode that can lead to battery fires or
The scientific revolution that could end Europe’s critical rare earth shortage – RETEMA
One of the most prominent publications in Spain focused on the environment and environmental engineering, RETEMA (Revista Técnica de Medio Ambiente), has republished an article by our Director, Prof. José Manuel Torralba, on how high-entropy materials could help reduce our dependence on rare earth
The scientific revolution that could end Europe’s critical shortage of rare earths
High-entropy materials are being developed in laboratories. megaflopp/Shutterstock José Manuel Torralba, IMDEA MATERIALS Europe is increasingly in a fragile position when it comes to sustaining our future prosperity. We’ve taken on numerous goals to save the planet, but lack the business
(ATENEA) Materials International Postdoctoral Programme in Materials Science and Engineering
Project details Funding: HORIZON TMA MSCA Cofund Postdoctoral programmeProject coordinator: IMDEA Materials Project period: 01/06/2025 – 31/05/2029 IMDEA Materials' coordinator Prof. Javier Llorca, Scientific DirectorMs Rosa Bazán, Head of Human
The awakening of perovskite: the revolutionary new material seeks its springboard to the market – ABC Economía
The publication ABC España has featured IMDEA Materials and the Institute's Principal Investigator, Prof. Harun Tüysüz, in its recent article on promising applications for Perovksite materials. You can read the full article (original content in Spanish), here:
On the fabrication of a FeCrAlMoTiNi multi-principal element alloy by material extrusion additive manufacturing
An Al-Zn-Cr alloy with outstanding processability by laser powder bed fusion
Single-Walled Carbon Nanohorns Functionalization of PVA/PDMS for Flexible Triboelectric Nanogenerators: IoT Remote Gait Sensor
Data-driven design and green preparation of bio-based flame retardant polyamide composites
A particle-based approach for the prediction of grain microstructures in solidification processes
An optimal-transport finite-particle method for driven diffusion
Regulation of interfacial intermetallic compounds growth and void defect formation in Sn-9Zn-0.02Al/Cu solder joint by balancing interfacial elemental diffusion: An effect of Pt alloying
Effect of elastic strains on the electrocatalytic activity of Au thin films for the hydrogen evolution reaction
Unraveling the Print-Structure-Property Relationships in the FFF of PEEK: A Critical Assessment of Print Parameters
IMDEA Materials hosts 7th IAB meeting to tackle R&D&I challenges in a changing global landscape
Confronting the challenges and opportunities for R&D&I in the current geopolitical landscape was one of the key topics up for discussion as IMDEA Materials Institute hosted its 7th Industrial Advisory Board (IAB) meeting. The annual gathering featured high-level representatives from
Polyrotaxane based phase change materials-A critical review
(FIREDESIGN) NEW GENERATION ADVANCED PHOSPHORUS-CONTAINING FLAME RETARDANTS DESIGNED VIA MACHINE LEARNING AND GENETIC ALGORITHM
Project details Funding: MSCA Postdoctoral Fellowships 2023. HORIZON-MSCA-2024-PF-01Project coordinator: IMDEA Materials Project period: 01/05/2025– 17/05/2027 IMDEA Materials' researchers Supervisor: Prof. De-Yi WangFellow: Dr. Qiong Tan Abstract Polymeric materials
Seminar by Prof. Mohamad Moosavi from University of Toronto, entitled “Connecting Materials Synthesis to Applications Using Machine Learning on X-ray Diffraction Data” – on May 23rd, 2025, at 12:15, in the Seminar Room.
Abstract: In this talk, I will present our work on developing machine learning methods to accelerate the design and discovery of nanoporous materials, with a focus on metal-organic frameworks (MOFs). Over the past decades, the synthesis of over 100,000 MOFs has marked significant progress in this
Deciphering a New Electrolyte Formulation for Intelligent Modulation of Thermal Runaway to Improve the Safety of Lithium-Ion Batteries
FYA of Juan León Ramos entitled “3D Printed Hydrogel with High Fire Resistance and Mechanical Properties” – May 13, 2025, at 12:00 PM in the Seminar Room.
Abstract: Hydrogels are used in daily life to make our lives easier; they can be used for medicine, architecture, security fields, and others. In the case of this thesis, we focus on the polymer polyvinyl alcohol (PVA) for the matrix of the Hydrogel. Hydrogels with other copolymers in the matrix
Bi-Layered, Ultrathin Coating Initiated Relay Response to Impart Superior Fire Resistance for Polymeric and Metallic Substrates
3D-printed biodegradable polymer scaffolds for tissue engineering: An overview, current stage and future perspectives
IMDEA Materials and Yanshan University to establish joint laboratory to study metallic materials processing
IMDEA Materials Institute and Yanshan University have signed an agreement to establish the International Joint Laboratory on Intelligent Computing Integrated Metallic Materials Innovative Processing. The agreement, accompanied by a Memorandum of Understanding, marks a major milestone in
Tailorable Piezoelectric Chain Morphology in Biocompatible Poly-l -lactide Induced by Melt-Based 3D Printing
The return of silicon: from chips to Lithium-Ion batteries: La Región Ourense
Silicon changed the world once. Is it about to do so again? Find out in the latest article by our Director, Prof. José Manuel Torralba, The Return of Silicon: From Chips to Lithium-Ion Batteries, published in La Región Ourense (original content in Spanish).
A Phosphorus and Nitrogen Containing Halloysite Derivative as Multifunctional Flame Retardant for Biobased Polyamide 56
(FireSafeBATT) TALENTO CÉSAR NOMBELA
Project details Funding: Comunidad de Madrid Project coordinator: IMDEA MATERIALES Project period: 01/05/2025 – 30/04/2029 IMDEA Materials' researchers Xiaowei Mu Abstract Lithium-ion batteries (LIBs) show advantages of high energy density, excellent cycle performance, and have been
Alpha-cyclodextrin-based polyrotaxane combining phytate lithium salt as a novel bio-based flame-retardant solid polymer electrolyte for all-solid-state lithium metal batteries
Giant elastic-wave asymmetry in a linear passive circulator
BIOCOMAT Project to Improve the Bioavailability of Polyphenolic Compounds in Food – Revista Alimentaria
Spanish publication Revista Alimentaria has highlighted the MSCA BIOCOMAT project currently underway at IMDEA Materials Institute that seeks to improve capsule-based delivery systems for polyphenolic compounds. You can read the full article (original content in Spanish, here.
Fast chats, big impact: IMDEA Materials hosts inaugural researcher ‘Speed Dating’ event
As IMDEA Materials continues to grow, particularly with the increasing number of predoctoral researchers, it has become more important than ever to find effective ways of sharing knowledge and identifying in-house expertise. In a bid to address this challenge, the Institute last week held its
Evaluation of laser-induced graphene for skeletal muscle tissue engineering applications
Influence of trace scandium addition on mechanical properties and biocompatibility of metastable β Ti-39Nb alloy for biomedical applications
Topological control of buckling and barrel-like deformations in mechanical metamaterials
A new study by researchers at IMDEA Materials Institute, in association with the University of Cambridge, demonstrates how mechanical instabilities in architected lattices can be precisely controlled to enable complex, functional deformations. By exploring the topological characteristics of
Can sustainable policies drive TOD effectively? Insights from multi-scenario simulations
Why are the bronze medals from the Paris 2024 Olympic Games deteriorating? – La Región, Ourense
Our Director, Prof. José Manuel Torralba, has published a new article in La Región in which he explains why many bronze medals awarded in Paris are losing their original shine and developing a tarnished, oxidised appearance. You can read the full article (original content in Spanish) here.
PhD Defense of Biaobiao Yang, entitled “Influence of the microstructure on the deformation mechanisms of wrought Mg alloys” – On April 25th, 2025 at 11:00 AM.
The PhD defence will take place in Leonardo Torres Quevedo Room, Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos (UPM).How to get there: https://maps.app.goo.gl/jNz7Pmv3mbCRbKMx5 The dissertation is titled "Influence of the microstructure on the deformation mechanisms of
Microstructure, mechanical properties, and tribological behavior of diamond-reinforced CuSnTi matrix composites by hot press sintering
The fertile two-way journey between the startup ecosystems of Spain and Latin America – ABC.es
Alberto Valázquez from ABC.es has highlighted IMDEA Materials Institute's first startup, Floatech, as a successful example of a public R&D spin-off created from universities and research centres. You can read the original article (content in Spanish), here.
Defect-Immune Sound Radiation in a Topologically Nontrivial Hyperbolic Metamaterial
Young talent joins the research team at IMDEA Materials
Accelerated materials discovery, optimisation of composite materials inspection, and characterisation of the next generation of bioabsorbable implants. These are just three of the research lines being developed by the new cohort of the Young Researchers Programme (Programa de Jóvenes
The power of emptiness: nanoporous materials to build the future – Yahoo! Noticias
Yahoo! Noticias has highlighted the latest article published by IMDEA Materials' Dr. Phuong Vo in The Conversation Spain on nanoporous materials and their engineering applications. You can read the full article (original content in Spanish), here.
The power of emptiness: nanoporous materials to build the future
Representation of a porous MOF structure capturing carbon dioxide molecules. Love Employee/Shutterstock Phuong Thúy Vo, IMDEA MATERIALES From CO₂ capture to drug delivery, porous materials are becoming essential in a wide range of applications. Among them are the so-called metal-organic
IMDEA Materials inspires scientific vocations through the 4ESO+Empresa programme
From April 8 to 10, IMDEA Materials welcomed 18 students from five schools across the Madrid region as part of the 4ESO+Empresa programme. An initiative of the Community of Madrid, this programme offers students the opportunity to get to know the working world, make informed decisions about their
The future of space goes through Getafe: FITEA 2025 reaffirms talent as a pillar of the aerospace sector – Aviación Digital
The online publication Aviación Digital is one of a number of outlets to have highlighted IMDEA Materials' role in hosting this year's Forum on Innovation, Talent and Aerospace Education, FITEA 2025. The event will be held at IMDEA Materials from October 29-31. You can read the original article
Bilayer sol-gel system for local prevention in prosthetic joint infections and osteointegration improvement
Scandium modified near-β Ti-based implants with ultra-low elastic modulus and superior biocompatibility
Seminar of Dr. Gabriele Greco from the Swedish University of Agricultural Sciences, entitled “Spider-inspired sustainable materials and structures” – on April 29th, 2025, at 10:00 am, in the Seminar Room.
Abstract: Spiders often evoke fear and disgust, yet their silks and webs inspire awe and fascination, capturing human curiosity throughout history. From sparking the interest of ancient philosophers to influencing practical innovations, spider silk has long been intertwined with our cultural and
Meeting between CSIC, the Community of Madrid, and IMDEA Institutes to Promote scientific excellence
Our director, Prof. Jose Manuel Torralba, has participated in a meeting with the President of the Spanish National Research Council (CSIC), Dr. Eloisa del Pino, the Deputy Minister of Universities, Research, and Science of the Community of Madrid, Dr. Ana Ramírez de Molina, and the Directors of the
IMDEA Materials Institute and the Technical University of Madrid (UPM) strengthen ties
Last Monday, IMDEA Materials Institute had the pleasure of welcoming the Rector of the Universidad Politécnica de Madrid (UPM), Prof. Óscar García Suárez, along with a university delegation, to discuss ways to strengthen and expand the existing ties between our two institutions. IMDEA Materials
Why is it worthwhile to study a doctorate? – La Región, Ourense
It’s a question that many master’s students ask themselves at this time of year. And, as our Director Prof. José Manuel Torralba points out, they don’t always find clear, realistic… let alone encouraging answers. In his recent article published in La Región, Prof. Torralba explores the social,
IMDEA Materials shines at the ‘Madrid Es Ciencia 2025’ Fair: a meeting of innovation and scientific outreach
IMDEA Materials participated once again in the 'Madrid Es Ciencia' 2025 Science Fair, held at IFEMA Madrid from March 27th to 29th. This edition, which gathered over 26,000 visitors, has established itself as one of the largest scientific outreach events in the Community of Madrid, and for the fifth
A gateway to the world of materials research: IMDEA Materials launches its 2025 Research Initiation Fellowships
IMDEA Materials Institute has announced a new call for applications for its 2025 Research Initiation Scholarships. This programme offers a unique opportunity for young researchers and technologists, allowing them to explore the field of materials science and engineering through a three-month
Effect of surface modification methods on 3D-printed NiTi alloys for cardiovascular applications
Low-Velocity Penetration Impact Behavior of Triply Periodic Minimal Surface Strut-Based Lattices
A novel P-N structure modified halloysite nanotube for simultaneously enhancing flame retardancy and mechanical properties of unsaturated polyester resin
New members of the IMDEA Materials Institute team – March 2025
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. Hello, my name is Berta Valbuena. I have a degree in Clinical
FYA of Yunhuan Liu entitled “Fire Protection Coatings for Enhanced Fire Safety of Battery Enclosures in Extreme Conditions” – March 28, 2025, at 2:00 PM in the Seminar Room.
Abstract: The demand for lightweight battery enclosures in new energy vehicles has led to the increased use of aluminum alloys and polymer composites. However, the potential hazards associated with thermal runaway events in high-energy-density batteries necessitate advanced fire mitigation
IMDEA Materials to showcase groundbreaking research at the ‘Feria Madrid es Ciencia’ 2025
IMDEA Materials will join the seven other IMDEA Institutes at the upcoming Feria Madrid es Ciencia 2025, held from March 27 to 29 at IFEMA MADRID, to present an exciting series of interactive demonstrations and experiments. The event, which attracts thousands of visitors each year, aims to foster
Adsorption behavior analysis of CNCl on transition metal-doped fluorinated diamanes: A first-principles study
The future of endovascular medical devices takes centre stage at BIOMEND Doctoral Network meeting
IMDEA Materials Institute has hosted the semi-annual meeting of the BIOMEND Doctoral Network, a Marie Skłodowska-Curie Actions (MSCA) Industrial Doctorate Network programme dedicated to training the next generation of researchers in bioabsorbable metallic endovascular medical devices. The meeting
IMDEA Materials to host annual virtual ‘Open PhD Day’ on April 3
IMDEA Materials Institute is set to welcome prospective PhD candidates to our annual Open PhD Day, which will take place online for the first time on Thursday, April 3. This event provides students from Spain and beyond with the opportunity to learn about PhD opportunities at one of Europe’s
FYA of Giovanni Ortiz Pérez entitled “Development of Monitoring and Control Strategies for Laser-Assisted Metal Material Deposition Processes” – April 4, 2025, at 12:00 PM in the Seminar Room.
Abstract: This study investigates defect formation during continuous-laser additive manufacturing of Inconel-718 through real-time monitoring integrating photodiodes and XCT tomography. Advanced machine learning techniques were applied to analyse and correlate thermal emission patterns with
Kaiyuan Tian
Jinchao He
Lucía Nogueiras
“Materials Science is crucial for the development of new technology” – La Opinión, El Correo de Zamora
La Opinion, El Correo de Zamora has featured an opinion piece from IMDEA Materials Director, Prof. José Manuel Torralba, highlighting the importance of Materials Science in developing new technologies. You can read the full article (original content in Spanish), here.
Developing softening-resistant Cu-Cr alloys and understanding their mechanisms via mechanism-informed interpretable machine learning
Nanocomposites of sequential dual curing of thiol-epoxy systems with Fe3O4 nanoparticles for remote/in situ applications: thermomechanical, shape memory, and induction heating properties
IRIDISCENTE advances in sustainable steel manufacturing through AI, scrap recycling, and additive manufacturing
The automation of defect detection processes in the microstructure of 3D printed components is just one of the advances in sustainable steel manufacturing that the European project IRIDISCENTE is working on. With a budget of nearly €10 million and coordinated by IMDEA Materials Institute and
Prof. Dr. De-Yi Wang elected to the European Academy of Sciences and Arts
Prof. Dr. De-Yi Wang, Principal Researcher at IMDEA Materials Institute and Professor at the Universidad Francisco de Vitoria (UFV) has been elected as a member of the European Academy of Sciences and Arts (EASA), one of Europe’s most prestigious scientific societies. Prof. Wang, who leads IMDEA
Electromagnetic Interference Shielding of a Sequential Dual-Curing Thiol-Epoxy System Reinforced with GNPs with High Shape Memory
Understanding the processing, microstructure, and deformation behavior of AZ31B Mg alloy fabricated by additive friction stir deposition
Madrid will open the world’s first AI-driven robotics laboratory to discover new polymer-based materials – El Economista
El Economista has highlighted the role of IMDEA Materials in the opening of the world's first robotics laboratory that will enable the discovery of new polymer-based materials using artificial intelligence (AI) to accelerate data collection and analysis. You can read the full article (original
Efficiently fire-safe asphalt achieved via synergistic effect of ferrocene and halloysite nanotube
Buckle-Barrel Correspondence Based on Topological Polarization Conversion in Mechanical Metamaterials
A company in Getafe is researching to enable electric cars to have a range of one thousand kilometers – Cadena SER
IMDEA Materials Senior Researcher and Floatech CTO, Dr. Juan José Vilatela, has been interviewed by David Sañudo on Hoy Por Hoy, Cadena SER Madrid Sur, about the recent inauguration of the company's new pilot plant in Getafe. You can listen to the full interview (original content in Spanish),
Laser-based additive manufacturing device and method for crystallisation control of metallic glasses
Patent details Status European patent filed Inventors Marcos Rodríguez Sánchez, María Teresa Pérez Prado, Damien Tourret, Adrián Dante Boccardo Application number EP24383248.2 Applicant IMDEA Materials Institute Priority
IMDEA Materials launches innovative project to enhance bioavailability of polyphenolic compounds in food
A new research project at IMDEA Materials Institute is tackling a significant challenge in food science with the aid of materials engineering: designing effective delivery systems for polyphenolic compounds (PCs). Found abundantly in plant-based foods, these compounds are known for their powerful
New members of the IMDEA Materials Institute team
Every month, we welcome new members of the IMDEA Materials team. Here, you can find a short profile of our most recent additions, including their upcoming role with IMDEA Materials and their educational and professional background. Hi, my name is Francesca Sepúlveda Espinoza, and I'm from
Lucía Puertas
IMDEA Materials: leader in MSCA PF fellowships in Spain for third consecutive year
For the third consecutive year, IMDEA Materials Institute ranks among the leading recipients of Marie Sklodowska-Curie Actions Postdoctoral Fellowships (MSCA PF) projects in Spain, with 8 projects awarded in the 2024 call. This places the institute as the third Spanish institution in terms of the
Strategic Alliance in advanced manufacturing process simulation between IMDEA Materials and CIMNE
Last Thursday, February 21, IMDEA Materials hosted a delegation from the International Center for Numerical Methods in Engineering (CIMNE), a leading international research centre in its field. The purpose of the visit, in addition to allowing the CIMNE delegation to experience firsthand IMDEA
Chemically degrading plastics to reuse in other products – Más de Uno Madrid
IMDEA Materials Institute researcher, Dr. Juan Carlos Babon, has spoken with Pepa Gea from Más de Uno Madrid about the work of our Catalysis and Energy Materials research group on how to chemically degrade plastics so that the resulting compounds can be reused in other products. You can listen to
Advanced Manufacturing
Nanomaterials
Fire-Resistant Materials Testing
Multiscale Characterisation Platform
Virtual Testing
FYA of Radouan Bouallala entitled “Surrogate modelling of the mechanical behaviour of structural composites” – May 14, 2025 at 12:00 PM in the Seminar Room.
Abstract: Coupon testing plays an important role in aeronautical design, providing a great understanding of material behaviour under different stress conditions. Integrating simulation at this stage could significantly reduce the need for extensive physical tests. This approach could reduce costs
On March 4th (Tuesday) will take place the Workshop on Materials for acoustic applications, organized by Lucia Doyle.
It will take place in the Seminar Room from 3:30 pm to 4:45 pm. Session: • Transcending Nature’s Boundaries: Metamaterials. Jingyi Zhang, IMDEA Materials• Acoustic metamaterials for aerodynamic noise reduction in high-speed trains. Eduardo Latorre, Polytechnic University of Madrid•
Influence of protrusion geometry on the microstructure and mechanical properties of AA2219 fabricated by additive friction stir deposition
Finite Element Discretization of the Thermo-Diffusive-Mechanical Problem with Large Deformations
Review of Performance of Advanced High Strength Steels under Impact
Visualizing the topological pentagon states of a giant C540 metamaterial
Micro-arranged ZnO particles and conductive fillers in PCL composites for enhanced piezoelectric and dielectric properties in bone tissue engineering applications
On the Rigidity and Mechanical Behavior of Triply Periodic Minimal Surfaces-Based Lattices: Insights from Extensive Experiments and Simulations
(COMPSTLAR) BOOSTING THE DIGITAL TRANSFORMATION OF AVIATION SUPPLY CHAINS FOR ADVANCED COMPOSITE AEROSTRUCTURES
Project details Funding: HORIZON-RIA - HORIZON Research and Innovation Actions Project coordinator: ASOCIACION DE INVESTIGACION METALURGICA DEL NOROESTE Project period: 01/02/2025 – 31/07/2028 IMDEA Materials' researchers Dr. Carlos Daniel González Dr. Federico Sket Abstract CompSTLar
IMDEA Materials’ annual Winter Metals Meeting fosters innovation and collaboration in metallurgy research
IMDEA Materials has celebrated its annual Winter Metals Meeting (WMM) with the institute’s researchers presenting a range of topics related to additive and sustainable manufacturing, heat treatment optimisation, biomedical applications and more. In total, 21 researchers took to the
A company born from IMDEA Materials unveils a plant for battery manufacturing – el Periódico de la Energía
The online publication El Periódico de la Energía is one of a number of publications to have highlighted the launch of IMDEA Materials' spin-off Floatech's new Pilot Plant for the production of silicon anodes in Getafe. You can read the article (original content in Spanish), here.