Position: Research Associate PhD.: Aerospace Engineering. Technical University of Madrid,  Research: Blade Impact/Small Fragment Impact/Ice

Dr. Teresa Pérez Prado, PhD in Physics, Complutense University of Madrid, 1998. Dr. Pérez Prado joined the University of California in San Diego (UCSD, USA) as a Postgraduate Research Engineer in 1998. She was also hired as a consultant at Oregon State University (USA). In 2001 she

The Director of IMDEA Materials, Prof. Javier Llorca, will be interviewed next September 2nd at 12:45 p.m. in the TV program “Efecto Dominó” in Intereconomía. The interview can be followed at the web site:   http://www.intereconomia.com/es/index.html

A Gel Permeation Chromatographer (GPC) is now available at IMDEA Materials Institute. The system (Waters) consists of a Waters 2414 refractive index detector, a Waters 2489 UV/Visible detector, a Waters 1500 column heater, and a series of Waters polystyrene GPC columns. It is used to determine

Future Fibres is world's leading designer, manufacturer and supplier of unidirectional PBO composite standing rigging for the high performance yachting and superyacht market. Future Fibres has a history of delivering innovation in design, superior composite rigging solutions, unmatched technical

The board of directors of the Centre for the Development of Industrial Technology (CDTI), headed for first time by Cristina Garmendia, Spanish Minister of Science and Innovation, approved on July 29th fourteen research projects in the fourth call of the Programme “National Strategic Consortiums of

MicroTest is an industrial contract with the European Powder Metallurgy Association (EPMA) to study the mechanical properties and the fracture behavior in correlation with the microstructure using real parts and specimens produced in industrial conditions. See MicroTest project description.

IMDEA - Materials is beginning its activities following the successful meetings of the Scientific Committee and of the Board of Trustees. The inauguration of the provisional site of IMDEA-materials, which will be held on October 30th. Dr. Gary Savage, director of operations of Honda Formula 1

An X-ray diffractometer is now available at IMDEA Materials Institute. The system (Empyrean, PANalytical) allow for phase analysis, texture, and residual stress determination, as well as reflectometry. It is equipped with a state-of-the-art X-ray platform for the analysis of powders, thin films,

Position:  Senior Reseacher PhD:  University of Gdansk, Poland Research:  Computational and Data-Driven Materials Discovery Address:  C/ Eric Kandel, 2. Getafe, Madrid

A RAMAN micro-spectroscopy system is now available at IMDEA Materials Institute. This system (Renishaw PLC) obtains the vibrational spectra of the molecular bonds. It is fully equipped with a Leica DM2700 microscope with 5x, 20x, 50x, 100x objectives, a 532nm Nd:YAG laser (50 mW at 532 nm) and a

IMDEA Materials Institute, in cooperation with the R&T Materials & Processing unit of AIRBUS Operations, has completed the first validation trials at AIRBUS Getafe facilities of an alternative curing technology for commercial epoxy resins/adhesives by passing an electrical current trough

Position: Visiting Researcher Ph.D. in Materials Science and Engineering  McMaster University, Hamilton, Ontario, Canada Short Bio Prof. Weck obtained his Bachelors and Masters degrees in Materials Science and Engineering from INSA-Lyon in France, his Ph.D. in Materials Science and

Position: Visiting Researcher Ph.D. in Engineering Sciences (Structural Engineering)  University of California, San Diego, USA. Professor of Structural Engineering, Michigan State University Research Interests Multiscale assessment and design of tailored materials, devices and structures.

Prof. Javier LLorca, Director of IMDEA Materials Institute, has obtained the prestigious ERC Advanced Grant from the European Union. Prof. LLorca will receive € 2.5 million along the next 5 years to develop multiscale modeling strategies to carry out virtual design, virtual processing

Position: Instrument Scientist PhD Physics University of Sevilla  Transmission Electron Microscopy of Advanced Materials

The PhD Thesis entitled "Mechanical Behavior of Hybrid 3D Woven Composites", carried out by Dr. Raúl Muñoz at IMDEA Materials Institute under the supervision of Dr. Carlos González and Prof. Javier Llorca, has been awarded by the Spanish Association of Composite

Mr. Mehdi Rahimian will defend his PhD thesis entitled "Physical simulation of investment casting of Mar-M247 Ni-based superalloy" next Monday 13th  of July, at 12:00 h in Carlos III University,  (aula de Grados), Leganés Campus  (Madrid).

Predoctoral Researcher Degree in Materials Engineering Polytechnic University of Madrid Research: Steel development using high throughput methods

Rocío Muñoz, alumni of IMDEA Materials Institute, has received the 3rd prize in the 2014 Zwick Science Award for her paper entitled “Analysis of crystallographic slip and grain boundary sliding in a Ti–45Al–2Nb–2Mn (at%)–0.8 vol%TiB2 alloy by high

Online RTM is a research collaboration between IMDEA Materials and AIRBUS Operations aiming at analyzing sensor information during Resin Transfer Molding (RTM) injection to assess the quality of composite parts. The incorporation of this new technology in the manufacturing process will lead to

Predoctoral Researcher Degree in Materials Engineering Polytechnic University of Madrid Research: Up scale simulation of plasticity in metals

VIRTEST is an industrial contract with Fokker Aerostructures to develop a novel multiscale simulation strategy to predict the mechanical behaviour of aeronautical composite laminates structures under static and low-velocity impact loads. VIRTEST will lead to a significant reduction in the number of

Predoctoral Researcher Degree in Materials Engineering Salamanca University, Spain Research: Composite Materials

IMDEA Materials Institute, STMicroelectronics, one of the world’s largest semiconductor companies, and the French Alternative Energies and Atomic Energy Commission (CEA) have recently signed a partnership agreement to perform a join research project in the field of microelectronics. This three

IMDEA Materials Institute and the School of Materials Science and Engineering of NanJing Tech University (China) signed a memorandum of understanding past 14/05/2015. Both organisations want to pursue and promote joint research and development activities of mutual interest in multiscale

An arc furnace is now available at IMDEA Materials Institute. This equipment (Arc 200, Arcast Inc.) allows melting, alloying, casting, rapid solidification and atomization of reactive and high melting point elements and alloys up to 3500°C using a clean ceramic free cold crucible process.

Position: Project Manager Degree in Industrial Electronic Engineering, University of León, Spain MBA: International University of La Rioja, Spain

Our internationalization strategy, based on mid-long term partnerships with key companies, highlighted in madri+d website. Read the whole story (ES)

Position:  Research Assistant MSc Universidad Pontificia Católica de Rio Grande do Sul, Brazil Research: Solidification processing and properties of Zn-Al hypoeutectic alloys

The collaboration between IMDEA Materials and Fokker Aerostructures has just been showcased in NetComposites journal (link to the article in NetComposites). The bilateral project VIRTEST, headed by Dr. Claudio Lópes, will lead to an improved understanding of the material behavior and the

Position:  Research Assistant MSc: Delft University of Technology Research: High temperature deformation behaviour of Cu/Nb nanoscale metallic multilayers

IMDEA Materials Institute participated past April 8th in the 1st ITP workshop - Technology Centres. During this meeting, participants discussed the research strategy of the company for next 10 years concerning jet engine research.

A nanoindenter stage to carry out mechanical tests inside a Scanning Electron Microscope (SEM) for the in-situ observation of the deformation mechanisms is now available at IMDEA Materials Institute. This system (PI 87 SEM PicoIndenter, Hysitron) allows the simultaneous acquisition of the

A linear density, crimp and tensile tester for single fibres is now available at IMDEA Materials Institute. This system (FAVIMAT+, Textechno) can be used to characterize mechanical properties of single fibres. It can measure the mechanical resistance, lineal density and crimp. In addition, it is

IMDEA Materials Institute launches the second call for the recruitment of final year and master students who wish to carry out a three month research internship (between June to September 2015) in an international and multidisciplinary environment under the supervision of a senior scientist. These

AMPI International (non-profit professional society which promotes the advancement of powder metallurgy (PM) and particulate materials as a science) recognizes the work of Prof. José Manuel Torralba (Deputy Director of IMDEA Materials). The 2015 AMPI fellow award recipients will receive

Position:Visiting Research Associate PhD.: Polytechnic University of Madrid Research: Computational solid mechanics Contact: david.portillo(AT)imdea.org

The PhD Thesis entitled "High Temperature Mechanical Behavior of Al/SiC Nanoscale Multilayers" and “In-situ analysis of the high temperature deformation and fracture mechanisms of a ɣ-TiAl alloy", carried out by Drs. Saeid Lotfian and Rocío Muñoz at IMDEA

A Micro-scale combustion calorimeter is now available at IMDEA Materials Institute. This system, maufactured by Fire Testing Technology performs rapid laboratory scale test of the flammability of materials on milligram quantities (in the order of mg) according to standard ASTM D7309-07. Check the

Prof. José Manuel Torralba, Deputy Director of IMDEA Materials Institute and head of the Solid State Processing group, has been elected member of the Editorial Board of Powder Metallurgy Journal, an international journal publishing peer-reviewed original research on the science and practice

Planetary mills are now available at IMDEA Materials Institute. The systems (PULVERISETTE 6 classic & 7 premium, FRITSCH) allows for grinding a wide variety of sample materials down to the nano range (rotational speeds up to 1000 rpm in model PULVERISETTE 7). Check the whole processing

IMDEA Materials Institute has received a grant (PTR-2014-0406) for the Spanish Ministry of Competitiveness and Innovation (MINECO) to manage the Spanish Technological Platform for advanced Materials and Nanomaterials (MATERPLAT) in the period 2014-2015. More details and information about this

The PhD Thesis entitled "High Temperature Mechanical Behavior of Al/SiC Nanoscale Multilayers" and “In-situ analysis of the high temperature deformation and fracture mechanisms of a ɣ-TiAl alloy", carried out by Drs. Saeid Lotfian and Rocío Muñoz at IMDEA Materials

Position: Laboratory Technician BSc.: Telecommunications Engineering, Valencia University, Spain Contact: david.maldonado(AT)imdea.org

Two new R&D projects belonging to the Madrid R&D technology programme have just been awarded to IMDEA Materials Institute. IMDEA Materials will coordinate the DIMMAT project (Multi-scale design of advanced materials), led by Dr. Maria Teresa Pérez-Prado.  Our research center is

Position: Research Associate PhD.: Autonomous University of Barcelona, Spain Research: Monte Carlo simulation of epitaxial growth for semiconductors Contact: juanpablo.balbuena(AT)imdea.org

Position: Research Assistant MSc.: Shanghai Jiang Tong University, China Research: New Generation Fire Retardant Materials Contact: zhi.li(AT)imdea.org

Position: Research Associate PhD.: University of Science and Technology of China, China, USA Research: Environmentally friendly fire retardant nanocomposites Contact: junhao.zhang(AT)imdea.org

Position: Research Associate PhD.: University of Maryland, USA Research: Experimental characterization and numerical modelling of composites Contact: sandip.haldar(AT)imdea.org

Two Ph.D students (Qian Liu and Chuanyun Wang) joined IMDEA Materials Institute along September 2014. Their research projects, CUCCOMP and SreenDM respectively, are funded by the China Scholarship Council.

Position: Research Assistant MSc.: Northwestern Polytechnical University, China Research: High throughput diffusion and phase transformation

Past august 2014, Dr .De-Yi Wang, head of High Performance Nanocomposites group at IMDEA Materials Institute, was elected “External Scientific Member” (IPF Fellow) at the Leibniz Institute of Polymer Research Dresden (IPF). IPF is one of the leading and largest polymer research

XMART is an industrial collaboration between Industria de Turbopropulsores S.A. and IMDEA Materials Institute aiming to study the effect of porosity and its distribution on MAR-M-247 tensile and fatigue test specimens. See XMART project description.

Position: Research Asistant (visiting) MSc.: University of Science and Technology Beijing, China Research: Metal matrix composites

Position: Research Asistant MSc.: Lomonosov Moscow University, Russia Research: Nanostructured supercapacitors Contact: evgeny.senokos(AT)imdea.org

A fatigue testing system is now available at IMDEA Materials Institute. The system (INSTRON 8802, INSTRON) allows a broad range of static and dynamic test applications from basic metals to larger scale component testing. Typical applications of this servohydraulic machines include fracture

Position: Research Associate PhD.: Katholieke Universiteit Leuven, Belgium Research: Multiscale modeling of composites Contact: jian.xu(AT)imdea.org

SIMUFOING is an industrial contract between Industria de Turbopropulsores S.A. (ITP) and IMDEA Materials Institute to develop new simulation techniques that can be used to predict damage on plane engines due to the ingestion of hail and birds. See all projects in the Integrated Computational

Position: Research Assistant MSc: TUDelft, The Netherlands Research: Characterization, design and optimization of  dispersed-ply laminates Contact: peyman.mouri(AT)imdea.org

Position: Research Assistant MSc: TUDelft, The Netherlands Research: Buckling and failure optimization of stiffened tow-steered composite panels Contact: momchil.jeliazkov(AT)imdea.org

A drop weight impact test system is now available at IMDEA Materials Institute. The system (INSTRON CEAST 9350, INSTRON) is designed to deliver 0.59 -757 J of energy. This instrument can be used to test any type of materials from composites to finished products, and is suitable for a range of impact

Position: Visiting Scientist PhD: Sichuan University, China Research: Bio-based Fire Retardant Materials Contact: yun.liu@imdea.org

IMDEA Materials Institute has just begun a research project financed by Hexcel. Hexcel is one of the main manufacturers of advanced composite materials for aerospace, defense, wind and industrial sectors. AROOA project will be developed in collaboration with Hexcel R&T centre in the United

IMDEA Materials institute has an opening for a Researcher (tenure-track position) in the area of X-ray characterization of materials. More details and application process

Position: Research Associate PhD: University of Manchester, UK Research: Crystal plasticity modeling Contact: david.gonzalez(AT)imdea.org

Dr. Ilchat Sabirov, head of the Physical Simulation group at IMDEA Materials Institute, has received the Young Researcher Award for outstanding contribution to nano-severe plastic deformation research at the NanoSPD6 conference held past June 30 – July 4 2014 in Metz (France). 

Silicio Ferrosolar S.L., part of Ferroatlantica S.L. group, has signed an R&D contract with IMDEA Materials Institute to optimize the production of solar-grade silicon via purification in high vacuum furnace. More details on SICASOL project

B/E AEROSPACE Inc., worldwide leading manufacturer of aircraft passenger cabin interior products, has signed a three-year long R&D contract with IMDEA Materials Institute to to develop innovative materials for aircraft interiors based on advanced polymers and macroscopic fibres. The aim is to

Position: Research Assistant BEng: Carlos III University of Madrid, Spain Research: Solidification and casting Contact: almudena.casado(AT)imdea.org

IMDEA Materials Institute has achieved great success in the last calls of the National fellowships programmes. Two researchers will join the “Ramón y Cajal” programme (2013 call) and one will join the postdoctoral fellowship programme (2013 call).

Position: Research Assistant BEng: Tecnun, Spain Research: Voids in out-of-autoclave prepregs Contact: juanjose.torres(AT)imdea.org

Position: Visiting Scientist PhD: Central South University, India Research: Computational Alloy Design Contact: jiang.wang(AT)imdea.org

Mr. Saeid Lotfian will defend his PhD thesis entitled "High Temperature Mechanical Behavior of Al/SiC Nanoscale Multilayers" next Monday 30th of June at 12:00 h in Carlos III of Madrid (video room 3.1.S08, Leganés campus (Madrid)). His work has been supervised by Dr. Jon Mikel

The poster entitled "Object Kinetic Monte Carlo studies of materials under helium ions irradiation", presented by Ms. Laura Agudo has been awarded at COSIRES 2014 conference. COSIRES (Computer Simulation of Radiation Effects in Solids) is a major international forum to present and discuss

Position: HHRR Project Manager Contact: rosa.bazan(AT)imdea.org

Position: Research Assistant BEng: Technical University of Madrid, Spain Research: Modeling of ice impact on jet turbines Contact: daniel.pozo(AT)imdea.org

Position: Research Assistant MSc: Technical University of Madrid, Spain Research: High performance nanocomposites Contact: sergio.dejuan(AT)imdea.org

Dr. De-Yi Wang, head of the High Performance Polymer Nanocomposites group at IMDEA Materials Institute, has been selected as Associate Editor of Nanomaterials and Energy journal. Nanomaterials and Energy is an international peer viewed journal that issued by Institution of Civil Engineers (ICE)

IMDEA Materials Institute has awarded four Research Initiation Fellowships (1st call). See list of fellowships awarded

Position: Research Associate PhD: University Hyderabad, India Research: Novel Fire Retardant Polymers Contact: vignesh.heeralal(AT)imdea.org

An article on the difficulties some of our foreign researchers face when coming to Spain has been published in “El Mundo”newspaper (nationwide publication).

A dual column tabletop testing system is now available at IMDEA Materials Institute. The system (INSTRON 5966, INSTRON) has 10 kN of capacity and 1756 mm of vertical test space. This equipment is a universal, static testing system that performs tensile and compression testing; and also

Position: Research Associate PhD: University of Girona, Spain Research: Modelling of non-conventional composites Contact: olben.falco(AT)imdea.org

Position: Research Associate PhD: V. Lashkarev Institute of Semiconductor Physics, Ukraine Research: Epitaxial growth of SiGe and III-V materials Contact: andrey.sarikov(AT)imdea.org

Position: Accounting Assistant Contact: vanessa.hernangomez(AT)imdea.org

Position: Research Assistant MSc: Carlos III University of Madrid, Spain Research: Electric curing of CNT/epoxy resins Contact: juancarlos.fernandez(AT)imdea.org

Position: Research Associate PhD: University of Navarra, Spain Research: Multiscale plasticity Contact: edison.bonifaz(AT)imdea.org

DMAPOL is an industrial contract between ACCIONA Infraestructuras and IMDEA Materials Institute to perform Dynamic Mechanical Analyses (DMA) in polymeric materials. See DMAPOL project description

Position: Research Assistant MEng: Carlos III University of Madrid, Spain Research: Micromechanics of Ni superalloys Contact: marcos.jimenez(AT)imdea.org

Metallurgical and Materials Transactions A publishes a total of eight papers from TKM-2013 workshop in its Issue 4, April 2014. The selected papers (see list below), starting with a review in phase-field modeling of polycrystalline solidification, principally appear in order consistently with the

NEW EPOXY project will develop novel Graphene Oxide/Layered Double Hydroxide (GO/LDH) hybrids as multifunctional reactive fire retardants for epoxy resins. NEW EPOXY is a Marie Curie Action (International Incoming Fellowship, IIF) funded by the 7th Framework Programme of the European Union. See NEW

The awards giving event of the 3rd IMDEA Materials Scientific Imaging Contest was held last Friday 14th of March. Competition was divided in three categories (materials characterization, materials simulation and open subject) and more than 100 photos were received. Winners of the 3rd edition were

Position: Research Associate PhD: Università di Bologna, Italy Research: Organic synthesis and multifunctional polymers Contact: carmine.coluccini(AT)imdea.org

The High Performance Nanocomposites group lead by Dr. De-Yi Wang participates in COST action MP1105: Sustainable flame retardancy for textiles and related materials based on nanoparticles substituting conventional chemicals (FLARETEX). Dr. De-Yi Wang was appointed as the National Representative from