Great success in the last call of FET open!
Two new collaborative European projects have just been awarded to our Institute in the last call of FET open. FET open is a funding instrument for breakthrough ideas requiring multidisciplinary research that can enable new technologies in the long run. Ruben Costa will coordinate a € 2.7 million
Optimizing metal powders for 3D printing
Our Deputy Director, Teresa Pérez Prado, works in optimization of metallic powders. This interview in "El Mundo" journal explains the ultimate goals of her research activity. Source | El Mundo
8th edition of the scientific imaging contest
We already know the winners of the 8th edition of the IMDEA Materials´ scientific imaging contest. This year the best images were: Category of charaterization Joule Heated Baobab, Anastasiia Mikhalchan and María Vélez Category of simulation:Dislocation going through a distribution of theta'
PhD Defense of Angel Alvaredo entitle “Effect of Graphene Nanoplatelets and Carbon Nanotubes in PEEK and PEEK/Carbon Fibre Composites”
The PhD Defense will take place, at 12:00, on next Tuesday 18th of June, in Carlos III University (Leganes) in the "Aula de Grados Padre Soler" The dissertation is entitled "Effect of Graphene Nanoplatelets and Carbon Nanotubes in PEEK and PEEK/Carbon Fibre Composites" Here is the link of the
An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al
First Year Assessment of Mewin Vincent , entitle “Quest for high performance Mg and Mg-Li/Na ion hybrid concepts” – In the Seminar Room at 12:00 pm
Abstract Magnesium batteries are superior to all the known battery systems owing to its substantially larger volumetric capacity, environmental benignity, electrochemical stability and lower cost. This study is focused on the improving the electrochemical characteristics of Magnesium based
Organophosphorus heteroaromatic compound towards mechanically reinforced and low-flammability epoxy resin
First Year Assessment of Akshya Kumar Pandey, entitle “Developing Ti- and Fe-based powders for laser additive manufacturing of ultrafine eutectics” – In the Seminar Room at 12:00 pm
Decades of academic research has gone into developing ultrafine eutectic and near-eutectic alloys of the systems Ti-Fe-Sn-Nb, Ti-Fe-Co, Fe-Ti-Si, Fe-Ti-Zr-B, etc., with remarkable mechanical properties. However, no conventional casting process exists that can provide high enough cooling rates
PROTEIN-POLYMER MATERIALS FOR ENERGY- AND MEDICAL-RELATED APPLICATIONS
Summary IMDEA Materials has developed both, a family of flexible and rigid polymer coatings, in which fluorescent proteins (FPs) and enzymes are easily introduced as well as a dehydration process further transform the coatings into a rubber/rigid material without chemical cross-linking. In all
ENERGY STORAGE IN MULTIFUNCTIONAL STRUCTURAL COMPOSITE MATERIAL
Patent details Status Patent granted Publication number ES20170030017, WO2018ES70015 Priority date 10 January 2017 Inventors Juan José Vilatela, Evgeny Senokos, Rebeca Marcilla, Jesús Palma Applicant IMDEA Materials Institute, IMDEA Energy
ELECTRODE FOR CAPACITIVE DEIONIZATION
Patent details Status Patent application in Spain Publication number P201730828 Priority date 22 June 2017 Inventors Juan José Vilatela, Cleis Santos Santos, Enrique García-Quismondo Hernáiz, Jesús Palma del Val Applicant IMDEA Materials Institute, IMDEA
Seminar of Dr. Manas Upadhyay from the “Ecole Polytechnique” (Paris), entitle “Micromechanical response during biaxial load path changes of stainless steel: insitu neutron diffraction and multi-scale modeling” – June 10th at 12:00 pm, in the Seminar Room
Micromechanical response during biaxial load path changes of stainless steel: insitu neutron diffraction and multi-scale modeling Manas V. Upadhyay1,*, J. Capek2, Anirban Patra3, Wei Wen4, Tobias Panzner2, Steven van Petegem5, Carlos N. Tomé4, Ricardo A. Lebensohn6, Helena van
Selectively localized nanosilica particles at the phase interface of PS/PA6/nanosilica composites with co-continuous structure via reactive extrusion
Alumni Newsletter Nº 3
Click in the image to access the full newsletter
IMDEA Materials in the annual meeting of ITP Aero´s research centres network
IMDEA Materials participated in the V Annual Meeting of ITP Aero´s research centres that was held on the 28th of May in Lerma. The participants in this meeting, besides ITP Aero as organiser, were Fundación CTA, Ceit-IK4, UPV/EHU, Mondragon Unibersitatea, UPM and IMDEA Materials Institute. During
Effect of oxidized wood flour as functional filler on the mechanical, thermal and flame-retardant properties of polylactide biocomposites
(CINEMA) CREATING AN INFRASTRUCTURE FOR THE NUMERICAL EXPLORATION OF METALLURGICAL ALLOYS
Funding: European Union, Marie Skłodowska-Curie Individual Fellowships, Horizon 2020 Programme (Grant Agreement 842795)Region: EuropeProject period: 2019 – 2021Principal Investigator: Supervisor: Dr. Javier Segurado (javier.segurado@imdea.org); Fellow: Dr. Damien TourretManufacturing has
Annual report 2018
Our latest annual report is availabe. Check here our outcomes and activities during the past year!
Microstructural Degradation and Creep Fracture Behavior of Conventionally and Thermomechanically Treated 9% Chromium Heat Resistant Steel
Microstructure-based modelling and Digital Image Correlation measurement of strain fields in austenitic stainless steel 316L during tension loading
«The next industrial revolution will be based on genetics and protein-based materials»
Our Scientific Director, Javier Llorca, expresses his views about the next industrial revolution in this article published by «El Pais» journal.
Beware of Doping: Ta2O5 Nanotube Photocatalyst Using CNTs as Hard Templates
Improved tensile strength and toughness of dense C/SiC-SiBC with tailored PyC interphase
Seminar of Andrew Cole Bergan, Research Engineer at NASA Langley Research Center, entitle “Establishing Predictive Capability for Progressive Damage and Failure in Composite Structures: A Perspective on Virtual Testing”- 21st of May, at 12:00 am in the Seminar Room
Abstract: Virtual testing by means of progressive damage and failure analysis (PDFA) of composite structures holds the promise of reducing the timeline for certification of composite structures by complementing experimental testing. The focus of this talk is on recent investigations conducted at
The Royal Spanish Society of Chemistry develops an Interactive Periodic
The United Nations General Assembly has proclaimed 2019 as the International Year of the Periodic Table. Among the many activities that are being developed in Spain, the Royal Spanish Society of Chemistry (RSEQ) has just published an interactive periodic table where we can enjoy a short and didactic
Doping of Self-Standing CNT Fibers: Promising Flexible Air-Cathodes for High-Energy-Density Structural Zn–Air Batteries
Effect of the heating rate on the microstructure of a ferritic ODS steel with four oxide formers (Y-Ti-Al-Zr) consolidated by spark plasma sintering (SPS)
Pore structure and electrochemical properties of CNT-based electrodes studied by in-situ small/wide angle X-ray scattering
Precipitation during high temperature aging of Al−Cu alloys: A multiscale analysis based on first principles calculations
Javier Llorca, first Spanish elected fellow by the world’s most important materials science association
Javier Llorca, scientific director of the IMDEA Materials Institute and leader of the research group on “Advanced structural materials and nanomaterialss” of the Technical University of Madrid has been elected Fellow of the Materials Research Society. The category of Fellow is awarded to members of
Simultaneously improving flame retardancy and dynamic mechanical properties of epoxy resin nanocomposites through synergistic effect of zirconium phenylphosphate and POSS
An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys
Rubén Costa in El Confidencial: “The researcher that works so that you can have a BIOLED light bulb at home”
The work of our colleague Rubén Costa has been highlighted in this article in the newspaper El Confidencial in the section named "Hacia un futuro mejor" and sponsored by Banco Santander, that has the goal of disseminating the projects of people that transform society and thrust progress. Click
Great work of our workers at the Madrid Fair for Science and Innovation 2019 last March.
This year's Madrid Fair for Science and Innovation was a great opportunity to have been able to transmit the research of excellence in science and materials engineering to all those in attendance. Helping to awaken the interest to solve the challenges of society and promote sustainable
Scalable Ultrasound-Assisted Casting of Ultra-large 2219 Al Alloy Ingots
Liu, Z. L.; Li, R. Q.; Jiang, R. P.; Zhang, L. H.; Li, X. Q.
On the accuracy of spectral solvers for micromechanics based fatigue modeling
I Annual Membership Event 2019 # Madrid Aerospace Cluster_2019
Analysis of the interface and mechanical properties of field-assisted sintered duplex stainless steels
Multiscale dendritic needle network model of alloy solidification with fluid flow
IMDEA Materials leads a 3D printing project for the development of Industry 4.0
MAT4.0-CM is the name of the new project led by the IMDEA Materials Institute. The acronym comes from the union of the word materials and the term 4.0 that defines the current industrial revolution marked by the application of Artificial Intelligence to productive processes. MAT4.0-CM is financed by
CAPSUL
Software details Software authors Javier Segurado, Javier LLorca, Sergio Lucarini, Aitor Cruzado, Sarra Haouala, Vicente Herrera Intellectual Property Rights Copyright © 2012-2021 Fundación IMDEA Materiales and Universidad Politécnica de Madrid. All rights
Synchrotron Radiation Applied to Real-Time Studies of the Kinetics of Growth of Aluminum Nitride Thin Multilayers
Rubén Costa awarded the Young Researcher ChemPubSoc Prize by the RSEQ
Our colleague Rubén D. Costa, Senior Researcher of IMDEA Materials, has been awarded the Young Researcher ChemPubSoc Prize by the Real Spanish Society of Chemistry (RSEQ) for his advances in the field of thin-film electroluminescent devices based on sustainable materials such as copper complexes
PhD Defense of Chuanyun Wang entitle “Fast Mapping of Microstructure and Mechanical Properties in Titanium Alloys by Kinetic Diffusion Multiple Approach”
The PhD Defense will take place, at 12:00, on next Thursday 28th of March, in the Seminar Room of the "Escuela de Caminos, Canales y Puertos" of the UPM. The dissertation is entitled "Fast Mapping of Microstructure and Mechanical Properties in Titanium Alloys by Kinetic Diffusion Multiple
IMDEA Materials in the Fair Madrid for Science and Innovation.
From the 28th to the 31st of March, the Fair Madrid for Science and Innovation will be held at the Trade Fair Institution of Madrid (IFEMA) within the framework of the education week. IMDEA Materials participates actively in this important dissemination event for Madrid´s region, showing and
High strain rate tensile behavior of a quenching and partitioning (Q&P) Fe-0.25C-1.5Si-3.0Mn steel
PhD Defense of Deng Xiangxing entitle “Development of new Cr-based hardmetals by liquid phase sintering and spark plasma sintering”, under the supervision of Dr. Andrea García-Junceda.
The PhD Defense will take place, at 11:30, on next Monday 25th of March, in Carlos III University (Leganes) in the classroom 3.S1.08. The dissertation is entitled “Development of new Cr-based hardmetals by liquid phase sintering and spark plasma sintering". Here is the link of the
IRIS
IRIS is an object oriented, general purpose, parallel code for computational mechanics in solid, fluid, and structural applications. It has finite element and meshless capabilities, a wide range of material models, and solvers for linear and nonlinear, stationary
MUESLI
MUESLI, a Material UnivErSal LIbrary, is a collection of C++ classes and functions designed to model material behavior at the continuum level. Developed at IMDEA Materials, it is available to the material science and computational mechanics community as a suite of standard models and as a platform
Additive manufacturing at IMDEA Materials
Our new lab for alloy design for additive manufacturing is now in full operation. Including facilities for powder production, laser melting, post-processing and microstructure characterization at all length scales, and staffed with highly experienced metallurgy researchers.
Origin of the low precipitation hardening in magnesium alloys
First Year Assessment of Nana Chen, entitle “Microstructure evolution and deformation mechanisms in metastable beta titanium alloy” – In the Seminar Room at 12:00 pm
Abstract: Metastable β titanium alloys constitute a promising family of alloys due to their high specific strength, high damage tolerance, workability, hardenability as well as corrosion resistance that has attracted great attention worldwide. However, their deformation mechanisms still remain
A Geometry Effect of Carbon Nanomaterials on Flame Retardancy and Mechanical Properties of Ethylene-Vinyl Acetate/Magnesium Hydroxide Composites
Facile fabrication of biobased P-N-C-containing nano-layered hybrid: Preparation, growth mechanism and its efficient fire retardancy in epoxy
Modifying the Semiconductor/Electrolyte Interface in CuO p-Type Dye-Sensitized Solar Cells: Optimization of Iodide/Triiodide-Based Electrolytes
Langmar, O.; Ganivet, C. R.; Scharl, T.; de la Torre, G.; Torres, T.; Costa, R. D.; Guldi, D. M.
(TEMACOM) ADVANCED MANUFACTURING TECHNOLOGIES FOR THE NEW GENERATION OF COMPOSITE MATERIALS
Funding: Regional Government of Madrid, Innovation Hubs call Region: Madrid Project period: 2019 – 2022 Principal Investigators: Carlos Daniel González (carlosdaniel.gonzalez@imdea.org) The goals of this project are the following: Development of advanced simulation toold to predict
Energy storage in multifunctional carbon fiber composites
IMDEA Materials work in the SORCERER project, funded by Clean Sky 2, has been highlighted in the CompositesWorld magazine. Click here to check the whole article.
Post-doctoral Research Associate in Digital Technologies for Processing of Composites
IMDEA Materials is looking for a Research Associate candidate to work in the research project TEMACOM funded by the Innovation Hub Project of the Community of Madrid 2019. Research activities will be focused in the development of new digital technologies based on machine learning algorithms and
Post-doctoral Research Associate in bio-hybrid optoelectronics
IMDEA Materials seeks a full-time Post-doc researcher with a priority to candidates with experience in i) engineering and preparation of fluorescent proteins, ii) spectroscopic characterization of fluorescent proteins (denaturation/renaturation), and iii) bio-materials based on bio-degradable
(SEPIFIRE) STUDY OF SEPIOLITE-BASED FIRE RETARDANT SYSTEMS
Funding: Spanish Ministry of Economy and Competitiveness (National R&D Programme for Societal Challenges)Partners: TOLSA S.A. (Project Coordinator), Materials Science Institute of Madrid (ICMM-CSIC)Region: SpainProject period: 2014 – 2017Principal Investigator: Dr. De-Yi
(NEW EPOXY) NEW GENERATION HIGH-PERFORMANCE FIRE RETARDANT EPOXY NANOCOMPOSITES: STRUCTURE-PROPERTY RELATIONSHIP
Funding: European Union, 7th Framework Programme (PIIF-GA-2013-626682)Region: Europe Project period: 2014 – 2016Principal Investigators: Fellow: Drs. Jintao Wan (jintao.wan@imdea.org); Supervisor: De-Yi Wang (deyi.wang@imdea.org)Epoxy resins find versatile and massive use in wide areas such as
(DESMAN) NEW MULTIFUNCTIONAL MATERIALS FOR AEROSPACE
Funding: B/E AEROSPACE Inc.Region: InternationalProject period: 2014 – 2017Principal Investigator: Dr. Juan José Vilatela (juanjose.vilatela@imdea.org)DESMAN is a three-year industrial contract with B/E AEROSPACE Inc., the worldwide leading manufacturer of aircraft passenger cabin interior
(FOTOFUEL) SOLAR FUELS PRODUCTION CHALLENGES EXCELLENCE NETWORK
Funding: Spanish Ministry of Innovation and competitiveness (National programme for the promotion of excellence in scientific and technical research) (ENE2014-52280-REDT)Partners: IMDEA Energy Institute (Coordinator), Institute of Catalysis and Petrochemistry, Institute of Chemical Research of
(COMETAD) DEVELOPMENT OF COMPUTATIONAL AND EXPERIMENTAL TECHNIQUES FOR ANALYSIS AND DESIGN OF FIRE RETARDANT POLYMERS
Funding: Spanish Ministry of Innovation and competitiveness (National programme for the promotion of excellence in scientific and technical research) (MAT2014-60435-C2-2-R) Partners: International Center for Numerical Methods in Engineering (CIMNE) (Project Coordinator), and IMDEA Materials
(STEM) STRUCTURAL ENERGY HARVESTING COMPOSITE MATERIALS
Funding: Spanish Ministry of Economy and Competitiveness (National R&D Programme for Societal Challenges) (MAT2015-62584-ERC)Region: SpainProject period: 2015 – 2016Principal Investigator: Dr. Juan José Vilatela (juanjose.vilatela@imdea.org)The purpose of this project is the development of new
(FIREINF) FIRE RETARDANT EPOXY INFUSION RESIN COMPOSITES
Funding: Foundation for the Research Development and Application of Composite Materials (FIDAMC)Partners: Foundation for the Research Development and Application of Composite Materials (FIDAMC) and IMDEA MaterialsRegion: Spain Project period: 2015 – 2016Principal Investigator: Dr. De-Yi
(FLARETEX) SUSTAINABLE FLAME RETARDANCY FOR TEXTILES AND RELATED MATERIALS BASED ON NANOPARTICLES SUBSTITUTING CONVENTIONAL CHEMICALS
Funding: European Union, European Cooperation in Science and Technology (COST action MP1105)Partners: 28 participating countries, chaired by Ghent University. IMDEA Materials is one of the representatives of SpainRegion: Europe Project period: 2012 – 2016Principal Investigator: Dr. De-Yi
(MULTICOMP) MULTI-FUNCTIONAL NANO-CARBON COMPOSITE MATERIALS NETWORK
Funding: European Union, European Cooperation in Science and Technology (COST action CA15107)Partners: 31 participating countries, chaired by the Karlsruhe Institute of Technology. IMDEA Materials Institute is one of the representatives of SpainRegion: Europe Project period: 2016 – 2020Principal
Seminar of Prof. Anna Serra from the Polytechnic University of Catalonia, entitle “Atomistic description of grain boundary dislocations and related processes” – At 12:30 pm, in the Seminar Room
Abstract: Grain boundaries (GB) are generally considered as static obstacles to dislocations and sinks for point defects and their clusters. But, in fact, the processes that take place at GBs is more complex and can reveal properties directly related to plasticity phenomena that go beyond the
Seminar of Prof. Eric Charkaluk (Directeur de Recherche CNRS – Laboratoire de Mécanique des Solides & Associate Professor at Ecole Polytechnique in France), entitle “Thermoplasticity through the scales” – At 12:00 pm, in the Seminar Room
ABSTRACT The Thermodynamics of Irreversible Processes (TPI) applied to the mechanics of materials boomed significantly in France in the 60s and 70s, under the impulse of Paul Germain. The formalization of the Generalized Standard Materials, proposed in 1975 by Bernard Halphen and Quoc-Son Nguyen,
Exploring the microstructure and tensile properties of cold-rolled low and medium carbon steels after ultrafast heating and quenching
Cerda, F. M. C.; Schulz, B.; Celentano, D.; Monsalve, A.; Sabirov, I.; Petrov, R. H.
05/03/2018 Contratación de los servicios de limpieza del Instituto IMDEA Materiales a adjudicar por procedimiento libre (abierto) con pluralidad de criterios
La Fundación IMDEA Materiales anuncia la licitación para la CONTRATACIÓN DE LOS SERVICIOS DE LIMPIEZA DEL INSTITUTO IMDEA MATERIALES A ADJUDICAR POR PROCEDIMIENTO LIBRE (ABIERTO) CON PLURALIDAD DE CRITERIOS. Número de expediente: Ref. 01/2018 Forma de adjudicación: Procedimiento
30/11/2017 – CONTRATACIÓN DE SUMINISTRO DE AM400 LASER MELTING SYSTEMS
Contrato de suministro de AM400 Laser Melting Systems a adjudicar por procedimiento negociado sin publicidad y por exclusividad. 30-11-2017, ANUNCIO DE LICITACIÓN El presente contrato tiene naturaleza desuministro y está sometido a regulación armonizada al ser su valor estimado superior a lo
17/11/2017 Contratación de suministro, instalación y puesta en funcionamiento de un evaporador de ultravacío para la fabricación de capas finas de metales y materiales orgánicos a adjudicar por procedimiento libre (abierto) con pluralidad de criterios
La Fundación IMDEA Materiales anuncia la licitación para la contratación de suministro, instalación y puesta en funcionamiento de un evaporador de ultravacío para la fabricación de capas finas de metales y materiales orgánicos a adjudicar por procedimiento libre (abierto) con pluralidad de
07/07/2017 – CONTRATACIÓN DE LOS SERVICIOS DE IMPLANTACIÓN DEL SISTEMA DE GESTIÓN IDINET
Contrato de servicios de implantación del programa IDINET a adjudicar por procedimiento negociado sin publicidad y por exclusividad. 07-07-2017, ANUNCIO DE LICITACIÓN El presente contrato tiene naturaleza de servicios y no está sometido a regulación armonizada al ser su valor estimado inferior
24/06/2017 Contratación de los servicios de seguridad y auxiliar de servicios (conserjería) de la sede del Instituto IMDEA Materiales a adjudicar por procedimiento abierto con pluralidad de criterios.
La Fundación IMDEA Materiales anuncia la licitación para la CONTRATACIÓN DE LOS SERVICIOS DE SEGURIDAD Y AUXILIAR DE SERVICIOS (CONSERJERÍA) DE LA SEDE DEL INSTITUTO IMDEA MATERIALES A ADJUDICAR POR PROCEDIMIENTO ABIERTO CON PLURALIDAD DE CRITERIOS. Número de expediente: Ref.
07/07/2017 Contratación de los servicios de mantenimiento integral del Instituto IMDEA Materiales a adjudicar por procedimiento abierto con pluralidad de criterios.
La Fundación IMDEA Materiales anuncia la licitación para la CONTRATACIÓN DE LOS SERVICIOS DE MANTENIMIENTO INTEGRAL DEL INSTITUTO IMDEA MATERIALES A ADJUDICAR POR PROCEDIMIENTO ABIERTO CON PLURALIDAD DE CRITERIOS. Número de expediente: Ref. 02/2017 Forma de
18/10/2011 Contrato de las obras de instalaciones en los laboratorios de la nueva sede de IMDEA Materiales en Tecnogetafe
Este contrato se rige por las normas internas de contratación de la fundación. El proceso se iniciará a partir del 18 de octubre del 2011. Entidad adjudicadora: Fundación IMDEA Materiales Tipo de contrato: ObrasObjeto del contrato: Contrato de las obras de instalaciones en los
04/10/2011 Contrato de las obras de ejecución del vial en Parque Equipado Getafe Sur – Tecnogetafe
Este contrato se rige por las normas internas de contratación de la fundación. El proceso se iniciará a partir del 4 de octubre del 2011. Entidad adjudicadora: Fundación IMDEA Materiales Tipo de contrato: ObrasObjeto del contrato: Contrato de las obras de ejecución del vial en Parque
27-01-2012, Licitación del contrato de suministro y montaje de mobiliario del edificio de la Fundación IMDEA Materiales en Tecnogetafe
04-06-2012, ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 16/05/2012, ha resuelto la adjudicación definitiva delContrato para el suministro y montaje del mobiliario de la nueva sede de IMDEA Materiales en Tecnogetafe. LOTE 1: Mobiliario zona
14/11/2012 Contrato de Suministro, Instalación y mantenimiento de un equipo de extrusión a adjudicar por procedimiento abierto con pluralidad de criterios.
Las empresas interesadas en participar en el proceso de licitación deben remitir comunicación vía correo electrónico a la dirección de contacto indicada en los pliegos (juanjose.vilatela@imdea.org) confirmando su interés. En dicho correo deben indicar como asunto “Contrato de suministro de un equipo
11/05/2015 Contrato de suministro, instalación y puesta en funcionamiento de un espectrómetro RAMAN de alta resolución a adjudicar por procedimiento reducido
11-05-2015, ANUNCIO DE LICITACIÓN El presente contrato es de suministro. Al ser el importe inferior a los límites establecidos en el artículo 15, no es un contrato sometido a regulación armonizada, rigiéndose por las normas internas de contratación. Presentación de ofertas: Las
29/04/2015 Contrato de suministro, instalación y puesta en funcionamiento de una plataforma de ensayos nanomecánicos in-situ dentro de un microscopio electrónico de transmisión y barrido a adjudicar por procedimiento libre con pluralidad de criterios
9-04-2015, ANUNCIO DE LICITACIÓN Las empresas interesadas en participar en el proceso de licitación deben remitir comunicación vía correo electrónico a la dirección de contacto indicada en los pliegos (jon.molina@imdea.org) confirmando su interés. En dicho correo deben indicar como asunto
29/04/2015 Contrato de suministro, instalación y puesta en funcionamiento de una plataforma de ensayos nanomecánicos in-situ dentro de un microscopio electrónico de transmisión y barrido a adjudicar por procedimiento libre con pluralidad de criterios
“Proyecto cofinanciado con fondos FEDER correspondientes al Programa Operativo de la Comunidad de Madrid, periodo 2007-2013” 08/07/2015 ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 08/07/2015, ha resuelto la adjudicación definitiva
29/04/2015 Contrato de suministro, instalación y puesta en funcionamiento de una plataforma de ensayos nanomecánicos in-situ dentro de un microscopio electrónico de transmisión y barrido a adjudicar por procedimiento libre con pluralidad de criterios
“Proyecto cofinanciado con fondos FEDER correspondientes al Programa Operativo de la Comunidad de Madrid, periodo 2007-2013” 08/07/2015 ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 08/07/2015, ha resuelto la adjudicación definitiva
15/12/2014 Contrato de suministro e instalación de un equipo de difracción de rayos X (DRX) a adjudicar por procedimiento libre con pluralidad de criterios
Contrato de suministro e instalación de un equipo de difracción de rayos X (DRX) a adjudicar por procedimiento libre con pluralidad de criterios. 10/03/2015 ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 10/03/2015, ha resuelto la adjudicación
15/12/2014 Contratación de los servicios de limpieza del Instituto IMDEA Materiales
Contratación de los servicios de limpieza del Instituto IMDEA Materiales a adjudicar por procedimiento libre (abierto) con pluralidad de criterios. 10/03/2015 ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 10/03/2015, ha resuelto la adjudicación
18/11/2014 Contratación de los servicios de secretaría técnica de la plataforma tecnológica española de materiales avanzados y nanomateriales (MATERPLAT)
18/12/2014, ADJUDICACIÓN Fundación Tecnalia Research & Innovation Importe: 95.000,00 € (IVA no incluido) Este contrato se rige por las normas internas de contratación de la fundación. El proceso se iniciará a partir del 18 de noviembre del 2014. Entidad adjudicadora: Fundación IMDEA
17/09/2014 Contrato de suministro e instalación de un sistema de micro extrusión
04-12-2014, ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 03/12/2014, ha resuelto la adjudicación definitiva del CONTRATO DE SUMINISTRO E INSTALACIÓN DE UN SISTEMA DE MICROCOMPOUNDING, a la empresa TECNOSA Nuevas Tecnologías
28/07/2014 Contrato de suministro e instalación de una Plataforma de Ensayos Mecánicos Multiescala con Observación in –situ dentro de un Microscopio Electrónico de Barrido
Contrato de suministro e instalación de una Plataforma de Ensayos Mecánicos Multiescala con Observación in –situdentro de un Microscopio Electrónico de Barrido es a adjudicar por Pactado sin Publicidad. 28-07-2014, ANUNCIO DE LICITACIÓN El presente contrato es de suministro. Al ser el
25/09/2013 Contrato de suministro e instalación de una PLATAFORMA INTEGRAL PARA LA CARACTERIZACIÓN MECÁNICA
Contrato de suministro e instalación de una PLATAFORMA INTEGRAL PARA LA CARACTERIZACIÓN MECÁNICA EN RÉGIMEN ESTÁTICO, FATIGA E IMPACTO para MATERIALES ESTRUCTURALES a adjudicar por procedimiento abierto con pluralidad de criterios. 21/01/2014 – ADJUDICACIÓN DEFINITIVA El Órgano de Contratación
23/04/2013 Contrato de suministro e instalación de un equipo de MICROSCOPÍA ELECTRÓNICA DE BARRIDO DE EMISIÓN DE CAMPO (FEGSEM) CON COLUMNA DE IONES FOCALIZADOS (FIB) a adjudicar por procedimiento abierto con pluralidad de criterios.
15-07-2013, ADJUDICACIÓN DEFINITIVA El Órgano de Contratación de la Fundación IMDEA Materiales, con fecha 15/07/2013, ha resuelto la adjudicación definitiva del Contrato para el suministro e instalación de un equipo de microscopía electrónica. Adjudicación: FEI EUROPE B.V.Condiciones de
08/03/2013 – REFERENCIA: ACUERDO MARCO 2013/03 PARA LA CONTRATACIÓN DE SERVICIOS DE LIMPIEZA
30/05/2013 Adjudicación El Órgano de Contratación del ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE LIMPIEZA DE LOS INSTITUTOS MADRILEÑOS DE ESTUDIOS AVANZADOS EN ENERGÍA, MATERIALES, NANOCIENCIA Y SOFTWARE DURANTE UN PERIODO DE CUATRO AÑOS reunido con fecha 24/05/2013 ha decidido adjudicar
22/02/2013 REFERENCIA: ACUERDO MARCO 2013/02 – ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE MANTENIMIENTO INTEGRAL
05/07/2013 Adjudicación El Órgano de Contratación del ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE MANTENIMIENTO INTEGRAL DE LOS INSTITUTOS MADRILEÑOS DE ESTUDIOS AVANZADOS EN ENERGÍA, MATERIALES, NANOCIENCIA Y SOFTWARE DURANTE UN PERIODO DE CUATRO AÑOS reunido con fecha 05/07/2013 ha
22/02/2013 REFERENCIA: ACUERDO MARCO 2013/02 – ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE MANTENIMIENTO INTEGRAL
05/07/2013 Adjudicación El Órgano de Contratación del ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE MANTENIMIENTO INTEGRAL DE LOS INSTITUTOS MADRILEÑOS DE ESTUDIOS AVANZADOS EN ENERGÍA, MATERIALES, NANOCIENCIA Y SOFTWARE DURANTE UN PERIODO DE CUATRO AÑOS reunido con fecha 05/07/2013 ha
22/02/2013 – REFERENCIA: ACUERDO MARCO 2013/01 PARA LA CONTRATACIÓN DE SERVICIOS DE SEGURIDAD Y AUXILIAR DE SERVICIOS (CONSERJERÍA)
30/05/2013 Adjudicación El Órgano de Contratación del ACUERDO MARCO PARA LA CONTRATACIÓN DE SERVICIOS DE SEGURIDAD Y AUXILIAR DE SERVICIOS (CONSERJERÍA)DE LOS INSTITUTOS MADRILEÑOS DE ESTUDIOS AVANZADOS EN ENERGÍA, MATERIALES, NANOCIENCIA Y SOFTWARE DURANTE UN PERIODO DE CUATRO AÑOS reunido con
04/05/2009 Contrato de servicios de dirección integrada de proyecto y gestión de las obras de construcción del edificio para la sede de la fundación IMDEA Materiales
Última modificación: Adjudicación Definitiva (Fecha de publicación 19/02/2010) Acuerdo de la Comisión Delegada, fecha 04 de mayo de 2009, por el que se publica la licitación del CONTRATO DE SERVICIOS DE DIRECCIÓN INTEGRADA DE PROYECTO Y GESTIÓN DE LAS OBRAS DE CONSTRUCCIÓN DEL
20/07/2011 Contrato para el suministro y montaje de los laboratorios de investigación de la nueva sede de IMDEA Materiales en Tecnogetafe
27/09/2011 Convocatoria del SEGUNDO ACTO PÚBLICO del proceso de LICITACIÓN DEL CONTRATO DE SUMINISTRO Y MONTAJE DE LOS LABORATORIOS DE INVESTIGACIÓN DE LA NUEVA SEDE DE IMDEA MATERIALES EN TECNOGETAFE Tal y como se establece en el pliego de cláusulas jurídicas que rige el contrato para el
Collaboration agreement with Waseda University
Our Institute has just signed a reseach collaboration agreement with Waseda University related to new material development for energy production and storage. This agreement will allow exchange of research staff between both institutions.
Seminar of Amaia Cipitria from Max Planck Institute of Colloids and Interfaces in Potsdam (Germany), entitle “Biomaterial physical properties in tissue regeneration” – At 12:00 pm, in the Seminar Room
Abstract: Cells respond not only to biochemical but also to physical cues, such as stiffness, geometry and matrix degradability. In-vitro studies showed that hydrogel elasticity or degradation properties alone can direct cell differentiation, while scaffold geometry can control tissue growth rate.
Seminar of Juan Pablo Fuenzalida from the University of Münster (Germany), entitle “Protein-based acoustic and photon spectroscopy: Applications from biomaterials to protein design” – At 12:00 pm, in the Seminar Room
Abstract: Evolution has provided us with the most abundant and versatile source of materials. In my talk, I will show how proteins can be used as labels and as building blocks. We will explore how an enzyme can be mutated and genetically conjugated to provide a tool for nanoparticle tracking and
Scientific partnerships
IMDEA Materials Institute is stablishing strategic partnerships with other research centres and universities around the world, which are internationally recognised in the field of Materials Science and Engineering. The goal is to create long-term collaboration frameworks of mutual benefit to develop
PhD Defense of Marta Cartón entitle “Development and optimization of the properties of gamma/gamma´ co-based superalloys for high temperature applications”, under the supervision of Prof. José Manuel Torralba Castello and Prof. Mónica Campos Gomez.
The PhD Defense will take place, at 11:30, on next Thursday 21st of February, in Carlos III University (Leganes) in the classroom 7.01.H01. The dissertation is entitled “Development and optimization of the properties of gamma/gamma´ co-based superalloys for high temperature applications". Here is
OptiQPAP consortium members participated in the Workshop OpTOMuST
Consortiums of three RFCS-funded projects (OptiQPAP, TOOLKIT and MuSTMeF) have actively participated in the cross-project Workshop OpTOMuST organized by Dr. Piet Kok (TATA Steel) and Prof. Leo Kestens (University of Ghent) on February 11-13, 2019 in Ghent. The participants had an opportunity to
An analysis of void formation mechanisms in out-of-autoclave prepregs by means of X-ray computed tomography
Torres, J. J.; Simmons, M.; Sket, F.; Gonzalez, C.
Microstructure, mechanical properties and aging behaviour of nanocrystalline copper-beryllium alloy
Lomakin, I.; Castillo-Rodriguez, M.; Sauvage, X.
Capturing chemical intuition in synthesis of metal-organic frameworks
Moosavi, S. M.; Chidambaram, A.; Talirz, L.; Haranczyk, M.; Stylianou, K. C.; Smit, B.
Interaction of Hemispherical Blast Waves with Inhomogeneous Spheres: Probing the Collision of a Supernova Ejecta with a Nearby Companion Star in the Laboratory
Garcia-Senz, D.; Velarde, P.; Suzuki-Vidal, F.; Stehle, C.; Cotelo, M.; Portillo, D.; Plewa, T; Pak, A.
20% success rate in call 2018 of Marie Skłodowska-Curie Actions Individual Fellowships
2 Marie Skłodowska-Curie Actions Individual Fellowships have recently been awarded to our Institute, and 2 more are on the reserve list. That represents a 20% success rate. Our new fellows will work in top-notch areas such as the numerical exploration of metallurgical alloys and inducing doping in
Influence of the Characteristics of Expandable Graphite on the Morphology, Thermal Properties, Fire Behaviour and Compression Performance of a Rigid Polyurethane Foam
Acuna, P.; Li, Z.; Santiago-Calvo, M.; Villafane, F.; Rodriguez-Perez, M. A.; Wang, D. Y.
Non-Isothermal Crystallization Behavior of PEEK/Graphene Nanoplatelets Composites from Melt and Glass States
Alvaredo, A.; Martin, M. I.; Castell, P.; de Villoria, R. G.; Fernandez-Blazquez, J. P.
Andrea Fernández, winner of the award in environment of the “Young Talent Awards-Card Young”, given by Angel Garrido.
The president of the Community of Madrid, Angel Garrido, has participated in the ceremony of delivery of the "Talento Joven-Carné Joven", which recognized the trajectory of five young people between 14 and 30 years old who have highlighted in the last year in five categories: volunteering,
IV Edition of the Young Talent Awards
Our colleague Andrea Fernández Gorgojo, has been awarded one of the Young Talent Awards (premio Talento Joven-Carné Joven ) from the regional government of Madrid (Comunidad de Madrid) in the environmental category due to her innovative project focused in the application of new materials to obtain
Women who design the future
In this opinion article in "El País" journal, our researcher Andrea García-Junceda claims the role of women in research centers, Universities and laboratories around the world. In order to achieve full and equal access to and participation in science for women and girls, and further achieve gender
Flame Retardant Polypropylene Composites with Low Densities
Perez, N.; Qi, X. L.; Nie, S. B.; Acuna, P.; Chen, M. J.; Wang, D. Y.
The influence of positive pulses on HiPIMS deposition of hard DLC coatings
Santiago, J. A.; Fernandez-Martinez, I.; Kozak, T.; Capek, J.; Wennberg, A.; Molina-Aldareguia, J. M.; Bellido-Gonzalez, V.; Gonzalez-Arrabal, R.; Monclus, M. A.
Seminar of Joshua Kiefer from Delft University of Technology, in Holand, entitle “An example case for Machine-Learning in Materials Science: A neural networks based framework for ‘smart’ computational micromechanics of composites” – At 2:30 pm, in the Seminar Room
Abstract: We shall present a ‘smart’ framework, developed to create surrogate models of complex phenomena in an automated way, based on a minimum amount of computer simulations. To do so, the framework combines Design of Experiments, Computational Modeling, and Neural Networks. While such a
A New Approach Toward Designing and Synthesizing the Microalloying Zn Biodegradable Alloys with Improved Mechanical Properties
Liu, ZL
Toward Automated Tools for Characterization of Molecular Porosity
Garcia, I. G.; Bernabei, M.; Haranczyk, M.
The Incorporation of omega Particles during Growing or Coarsening Process in Metastable beta Titanium Alloy
Tang, Bin; Kou, Hongchao; Cui, Y. -W.; Chang, Hui; Li, Jinshan; Zhou, Lian
Interdiffusion Study and Assessment of Mobility for Ti-Mo Alloys
Feng, Liang; Huang, Lei; Chang, Hui; Cui, Yu-wen; Li, Jin-shan
Directionally Solidified Eutectic and Advanced Ceramics Preface
Ramirez-Rico, Joaquin; Martinez-Fernandez, Julian; Llorca, Javier; Orera, Victor M.; Sayir, Ali
Model for the Annealing of Partial Martensite-Austenite Microstructures in Steels
Santofimia, M. J.; Speer, J. G.; Zhao, L.; Sietsma, Jilt
Effect of Grain Refinement on the Mechanical Behaviour of an Al6061 Alloy at Cryogenic Temperatures
Moreno-Valle, E.; Perez-Prado, M. T.; Murashkin, M. Yu.; Valiev, R. Z.; Bobruk, E. V.; Sabirov, I.
ADVANCES AND CHALLENGES IN THE COMPUTATIONAL SIMULATION OF COMPOSITES
LLorca, J.
Downsizing of single crystalline high aspect ratio tungsten nanowires
Milenkovic, Srdjan; Drensler, Stefanie; Hassel, Achim Walter
Untitled
Danninger, H.; Torralba, J. M.
Processing-Microstructure-Property Relationships & Deformation Mechanisms of Magnesium Alloys Foreword
Perez-Prado, M. T.; LLorca, J.; Boehlert, C. J.
International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control Foreword
Cui, Yuwen; Torralba, Jose M.; Lu, Xiao-Gang
Low temperature junction formation by Solid Phase Epitaxy on thin film devices: atomistic modeling and experimental achievements
Sklenard, B.; Batude, P.; Pasini, L.; Fenouillet-Beranger, C.; Previtali, B.; Casse, M.; Brunet, L.; Rivallin, P.; Barbe, J-C.; Tavernier, C.; Cristoloveanu, S.; Vinet, M.; Martin-Bragado, I.
Effect of solidification parameters on the secondary dendrite arm spacing in MAR M-247 superalloy determined by a novel approach
Milenkovic, S.; Rahimian, M.; Sabirov, I.; Maestro, L.
INFLUENCE OF THE FIBER ALIGNMENT IN THE BALLISTIC PERFORMANCE OF DYNEEMA NON-WOVEN FABRICS
Martinez-Hergueta, Francisca; Galvez, Francisco; Gonzalez, Carlos
Ultra-fine grained Al-Mg alloys with superior strength via physical simulation
Sabirov, I.; Enikeev, N.; Kazykhanov, V.; Valiev, R.; Murashkin, M.
Compositional dependence of serrated flow in nickel binary solid solutions during high-temperature microindentation
Gan, Bin; Tin, Sammy
Atomistic modelling and simulation of arsenic diffusion including mobile arsenic clusters
Martin-Bragado, Ignacio; Zographos, Nikolas; Castrillo, Pedro
MICROTESTING AND CRYSTAL PLASTICITY MODELLING OF IN718 SUPERALLOY GRAINS
Cruzado, A.; Gan, B.; Chang, H.; Ostolaza, K.; Linaza, A.; Milenkovic, S.; Molina-Aldareguia, J. M.; Llorca, J.; Segurado, J.
Oxidation behavior and thermal stability of a NiAlV eutectic alloy
Milenkovic, Srdjan; Caram, Rubens
Pressed and sintered AISI 4140 PM low alloy steel from gas atomised powders
Navarro, G.; Jabbari Taleghani, M. A.; Torralba, J. M.
On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31
Boehlert, Carl; Chen, Zhe; Gutierrez-Urrutia, Ivan; Llorca, Javier; Perez-Prado, Maria Teresa
Comment on Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials by K. Danas and P. Ponte Castaneda Response
Danas, Kostas; Ponte Castaneda, Pedro
Depth sensing indentation of organic-inorganic hybrid coatings deposited onto a polymeric substrate
Fasce, L. A.; Seltzer, R.; Frontini, P. M.
A special issue of Comptes Rendus Mecanique in honor of Andre Zaoui Preface
Bornert, M.; Brenner, R.; Castelnau, O.; Ponte Castaneda, P.; Suquet, P.
TENSILE AND CREEP DEFORMATION MECHANISMS IN ROLLED AZ31
Chen, Z.; Boehlert, C.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T.
Modeling and Optimization of Solar Cells
Moroz, Victor; Huang, Joanne; Letay, Gergoe; Martin-Bragado, Ignacio
Evolution of texture and microstructure of AZ31 Mg alloy sheet at high strain rates
Ulacia, I.; Dudamell, N. V.; Esnaola, J. A.; Yi, S. B.; Perez-Prado, M. T.; Galvez, F.; Letzig, D.; Hurtado, I.
Editorial
Petrov, R.; Sabirov, I.
CompTest 2015-Composites testing and model identification international conference, 8-10 April 2015 in Madrid, Spain
Gonzalez, Carlos; Lopes, Claudio; LLorca, Javier; Wisnom, Michael R.; Pierron, Fabrice
Symposium on New Steels for Applications Under Extreme Conditions Foreword
Garcia-Junceda, Andrea; Santofimia, Maria Jesus
On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels
Garcia-Junceda, Andrea; Campos, Monica; Garcia-Rodriguez, Nerea; Manuel Torralba, Jose
A distributed-memory parallel lattice Kinetic Monte Carlo algorithm for crystal growth applied to barite (001) face
Abujas-Pereira, Jeronimo; Martin-Bragado, Ignacio; Pina, Carlos M.; Pizarro, Joaquin; Galindo, Pedro L.
Computational study of atomic mobility in hcp Mg-Al-Zn ternary alloys
Wang, Jingya; Li, Na; Wang, Chuanyun; Ignacio Beltran, Juan; LLorca, Javier; Cui, Yuwen
Beneficial effect of the mechanical bond on carbon nanotube polymer fillers
Lopez, Alejandro; Moffa, Maria; Bernal, Mar; De Juan, Alberto; Fernandez-Blazquez, Juan P.; Vilatela, Juan; Pisignano, Dario; Perez, Emilio
Preparation and Properties of a Main-Chain Smectic Liquid Crystalline Elastomer with Shape-Memory Ability
Martinez-Gomez, Aranzazu; Fernandez-Blazquez, Juan P.; Bello, Antonio; Perez, Ernesto
Towards accurate porosity descriptors based on guest-host interactions
Paik, Dooam; Haranczyk, Maciej; Kim, Jihan
A stabilized meshless method for the solution of the lagrangian equations of newtonian fluids
Urrecha, M.; Romero, I.
A NEW APPROACH TO UNDERSTAND THE CONTRIBUTION OF THE MICROSTRUCTURE IN THE FRACTURE BEHAVIOR OF SINTERED STEELS
Bernardo, Elena; Galan-Salazar, Andrea; Campos, Monica; Torralba, Jose M.
Preface: special issue on computational micromechanics of materials
Segurado, Javier; Sadowski, Tomasz; LLorca, Javier; Schmauder, Siegfried
Multiscale modeling of the small punch test in nanostructured Ti
Ridruejo, Alvaro; Segurado, Javier; Cristina Moreno-Valle, Eva; Sabirov, Ilchat; LLorca, Javier
Tribo-Mechanical Properties of Hard Hydrogen-Free Diamond-Like Carbon Coatings Prepared by Magnetron Sputtering
Fernandez-Martinez, Ivan; Antonio Santiago, Jose; Bellido-Gonzalez, Victor; Monclus, Miguel; Molina, Jon; Gonzalez-Arrabal, Raquel; Papa, Frank; Wennberg, Ambiorn
On the use of a localized STRASS technique to obtain highly tensile strained Si regions in advanced FDSOI CMOS devices
Bonnevialle, A.; Reboh, S.; Le Royer, C.; Morand, Y.; Hartmann, J. -M.; Rouchon, D.; Pedini, J. -M.; Tabone, C.; Rambal, N.; Payet, A.; Plantier, C.; Boeuf, F.; Haond, M.; Claverie, A.; Vinet, M.
High Frequency Dissipative Integration Schemes for Linear and Nonlinear Elastodynamics
Romero, Ignacio
Investigation of the Deformation Activation Volume of an Ultrafinegrained Ti50Ni50 Alloy
Gunderov, D. V.; Churakova, A. A.; Lukianov, A. V.; Prokofiev, E. A.; Prokoshkin, S. D.; Kreizberg, A. Yu.; Raab, G. I.; Sabirov, I. N.
NEW FINDINGS ON THE WETTABILITY AND SPREADING OF COPPER ON IRON-BASE SUBSTRATES
Bernardo, Elena; de Oro, Raquel; Campos, Monica; Torralba, Jose M.
Effect of Hydrostatic Pressure on the 3D Porosity Distribution and Mechanical Behavior of a High Pressure Die Cast Mg AZ91 Alloy
Sket, Federico; Fernandez, Ana; Jerusalem, Antoine; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria
Enhanced ductility of ultra-fine grained metallic materials
Sabirov, I.
Ballistic performance of hybrid nonwoven/woven polyethylene fabric shields
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Mesoporous metal oxide/pyrophosphate hybrid originated from reutilization of water treatment resin as a novel fire hazard suppressant
Pan, Ye-Tang; Castillo-Rodriguez, Miguel; Wang, De-Yi
Thermodynamic mechanism of the intermixing of multilayered structures in the SiOx/SiO2 superlattices with nanometer thick layers
Sarikov, Andrey; Zhigunov, Denis
Effect of Cellulose Nanocrystals on Fire, Thermal and Mechanical Behavior of N,N ‘-Diallyl-phenylphosphoricdiamide Modified Poly(lactic acid)
Yang, Weijun; Zhao, Xiaomin; Fortunati, Elena; Dominici, Franco; Kenny, Jose M.; Puglia, Debora; Wang, De-Yi
A generalization of Castigliano’s theorems for structures with eigenstrains
Romero, I.
Structure-Property Relationships of Nanocomposites Based on Polylactide and Layered Double Hydroxides – Comparison of MgAl and NiAl LDH as Nanofiller
Leng, Jing; Kang, Nianjun; Wang, De-Yi; Falkenhagen, Jana; Thuenemann, Andreas F.; Schoenhals, Andreas
Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods
Lin, B. C.; Li, X.; Jain, Atul; Wu, M-S; Mier, R.; Herraez, M.; Gonzalez, C.; LLorca, J.; Nutt, S. R.
Formulation and numerical solution of non-smooth elasto-visco-plasticity models
del Pozo, D.; Romero, I.
Lattice kinetic Monte Carlo simulation of epitaxial growth of silicon thin films in H-2/SiH4 chemical vapor deposition systems
Pablo Balbuena, Juan; Martin-Bragado, Ignacio
Quantum Dots, Fluorescent Proteins Vie for Supremacy
Costa, Ruben D.
Weak interface dominated high temperature fracture strength of carbon fiber reinforced mullite matrix composites
Yang, L. W.; Liu, H. T.; Jiang, R.; Sun, X.; Mao, W. G.; Cheng, H. F.; Molina-Aldareguia, J. M.
Ring-Opening Copolymerization of Mixed Cyclic Monomers: A Facile, Versatile and Structure-Controllable Approach to Preparing Poly(methylphenylsiloxane) with Enhanced Thermal Stability
Li, Cheng; Zhang, Deqi; Wu, Linbo; Fan, Hong; Wang, Deyi; Li, Bo-Geng
A new approach for the solution of the neighborhood problem in meshfree methods
Tapia-Fernandez, Santiago; Romero, Ignacio; Garcia-Beltran, Angel
{110}-Terminated Square-Shaped Gold Nanoplates and Their Electrochemical Surface Reactivity
Chen, Ying; Milenkovic, Srdjan; Hassel, Achim Walter
Compositional screening of Zr-Nb-Mo alloys with CALPHAD-type model for promising bio-medical implants
Liang, J. S.; Liu, L. B.; Xu, G. L.; Wang, X.; Zhang, L. G.; Shi, X.; Tao, X. M.
MUESLI – a Material UnivErSal LIbrary
Portillo, David; del Pozo, Daniel; Rodriguez-Galan, Daniel; Segurado, Javier; Romero, Ignacio
Kinetic Monte Carlo simulation of phase-precipitation versus instability behavior in short period FeCr superlattices
Rodriguez-Martinez, F. J.; Castejon-Mochon, J. F.; Castrillo, P.; Berenguer-Vidal, R.; Dopico, I.; Martin-Bragado, I.
Influence of cerebral blood vessel movements on the position of perivascular synapses
Urrecha, Miguel; Romero, Ignacio; DeFelipe, Javier; Merchan-Perez, Angel
RETRACTION: Atomistic simulation of damage accumulation and amorphization in Ge (Retraction of Vol 117, art no 055703, 2015)
Gomez-Selles, Jose L.; Claverie, Alain; Sklenard, Benoit; Benistant, Francis; Martin-Bragado, Ignacio
Multiscale Characterization of Nanoengineered Fiber-Reinforced Composites: Effect of Carbon Nanotubes on the Out-of-Plane Mechanical Behavior
Medina, Carlos; Fernandez, Eduardo; Salas, Alexis; Naya, Fernando; Molina-Aldereguia, Jon; Melendrez, Manuel F.; Flores, Paulo
Mechanical and Electrical Properties of Direct Spun Carbon Nanotube Fibers Exposed to Ultrahigh Temperatures in Vacuum
Zhang, Xiao-Shan; Yang, Ling-Wei; Liu, Hai-Tao; Zu, Mei
Construction of chelation structure between Ca2+ and starch via reactive extrusion for improving the performances of thermoplastic starch
Zhang, Shuidong; Lin, Zesheng; Jiang, Guo; Wang, Junsheng; Wang, De-Yi
Enabling high resolution strain mapping in zirconium alloys
Lunt, D.; Orozco-Caballero, A.; Thomas, R.; Honniball, P.; Frankel, P.; Preuss, M.; da Fonseca, J. Quinta
Effect of solutes on the rate sensitivity in Ti-xAl-yMo-zV and Ti-xAl-yMo-zCr beta-Ti alloys
Wang, C.; Li, N.; Cui, Y.; Perez-Prado, M. T.
Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads
Liu, Sai; Zhu, Deju; Li, Gaosheng; Yao, Yiming; Ou, Yunfu; Shi, Caijun; Du, Yunxing
On the quest for the strongest materials
LLorca, Javier
High-temperature conduction behavior of carbon nanotube fiber from 25 degrees C to 1100 degrees C
Zhang, Xiaoshan; Yang, Lingwei; Liu, Haitao
Demonstration of transmission high energy electron microscopy
Merrill, F. E.; Goett, J.; Gibbs, J. W.; Imhoff, S. D.; Mariam, F. G.; Morris, C. L.; Neukirch, L. P.; Perry, J.; Poulson, D.; Simpson, R.; Volegov, P. L.; Walstrom, P. L.; Wilde, C. H.; Hast, C.; Jobe, K.; Smith, T.; Wienands, U.; Clarke, A. J.; Tourret, D.
Insightful investigation of smoke suppression behavior and mechanism of polystyrene with ferrocene: An important role of intermediate smoke
Li, Zhi; Fernandez Exposito, Daniel; Jimenez Gonzalez, Alejandro; Wang, De-Yi
New Materials and Approaches for Advanced Optoelectronics
Coto, Pedro B.; Costa, Ruben D.
Peripheral Substitution of Tetraphenyl Porphyrins: Fine-Tuning Self-Assembly for Enhanced Electroluminescence
Charisiadis, Asterios; Bagaki, Anthi; Fresta, Elisa; Weber, Katharina T.; Charalambidis, Georgios; Stangel, Christina; Hatzidimitriou, Antonios G.; Angaridis, Panagiotis A.; Coutsolelos, Athanassios G.; Costa, Ruben D.
Large-Area Schottky Junctions between ZnO and Carbon Nanotube Fibres
Monreal-Bernal, Alfonso; Vilatela, Juan J.
Development of a Cr-Based Hard Composite Processed by Spark Plasma Sintering
Garcia-Junceda, A.; Saez, I.; Deng, X. X.; Torralba, J. M.
Structural design, preparation and characterization of light, isotropic and robust statically determined organic frameworks as reusable adsorbents
Yue, H-B.; Guo, J. W.; Fu, S. Q.; Li, X.; Wen, W. Q.; Jiang, W. Z.; Tong, R.; Haranczyk, M.
