The PhD Defense will take place today, at 4:00 pm, in  the Aula Adoración de Miguel 1.2.C16, at the building Betancourt of the University Carlos III. The dissertation is entitled "Development and characterization of advanced thin coatings on nanostructured titanium for biomedical

The PhD Defense will take place today, at 4:00 pm, in  the Aula Adoración de Miguel 1.2.C16, at the building Betancourt of the University Carlos III. The dissertation is entitled "Development and characterization of advanced thin coatings on nanostructured titanium for biomedical

Abstract: In metals and alloys, complex solidification microstructures, such as dendrites, arise from a subtle interplay between phenomena occurring at much different scales: from atom attachment kinetics to macroscopic transport of heat and species in the different phases. As such, solidification

Abstract: Magnesium (Mg) is a widely used material in industrial applications due its low weight, ductility and good mechanical properties. For clinical applications such as non-permanent implants Mg is considered as a good option because it is biodegradable and its degradation products are not

Abstract: Rechargeable lithium-ion (Li-ion) batteries have become one of the most convenient options for advanced energy storage technologies, getting to dominate the battery market. Nevertheless, they cannot satisfy the ever increasing demand of energy density that is needed for both nowadays and

The PhD Defense will take place, at 11:00, on next Thuersday, 19 of December, in the Seminar Room of the Department of Materials in the Escuela de Ingenieros de Caminos, UPM. The dissertation is entitled "High throughput screening of strength and creep properties in Mg-Zn alloys" . Here is

The PhD Defense will take place, at 12:30, on next Tuesday, 12 of December, in the Seminar Room of the Department of Materials in the Escuela de Ingenieros de Caminos, UPM. The dissertation is entitled “Crystal Plasticity Simulation of the Thermo-mechanical Coupled Behavior in Polycrystalline

ABSTRACT In this work, following Agoras et al. [1], we develop a homogenization procedure for particulate composites with elasto-viscoplastic constituents. By employing a standard time-discretization scheme  for the local stress rate, we show that the associated

Perovskites for hybrid light emitting devices Abstract: Nowadays, light-emitting diodes (LEDs) have been used in various areas, such as illumination, signals, automotive, mobile appliances, decoration, and so on. Many materials have been used for the LEDs. Perovskites, as a new type

Polymer-protein phosphors for optoelectronic applications Abstract: Bio-hybrid light-emitting diodes (Bio-LEDs) are lighting devices merging inorganic light-emitting diodes with fluorescent proteins (FP) acting as both color down-conversion and encapsulation systems. This new lighting concept

Meeting climate targets with both eyes open: How can we meet the growing demand for materials without destroying the environment? Presenter: Dr Ana González Hernández (Emerson) – Sustainability and Decarbonisation Manager. Collaborator and Author: Dr Jonathan M. Cullen (Resource Efficiency

Outstanding Radiation Resistance of Tungsten-based High Entropy Alloys O. El-Atwani1, N. Li1, M. Li2, A. Devaraj3, J. K. S. Baldwin1, M. M. Schneider1, D. Sobieraj4, J. S. Wrobel4, D. D. Nguyen-Manh5, S. A. Maloy1, and E. Martinez6 1 Materials Science and Technology Division, Los Alamos

The PhD Defense will take place, at 11:00, on next Wednesday, 6th of November, in the "Sala blanca" (first floor) of the "ETSI Caminos Canales y Puertos". The dissertation is entitled “Atomistic modeling of the strengthening mechanisms in FCC and HCP metals”. It was advised by Prof. Javier

Abstract: The project topic is gas phase intercalation of carbon nanotube fibers (CNTFs), with the intention of enhancing their conductivity without introducing defects in the carbon lattice. Furthermore, the main structural parameters of bundles of carbon nanotubes required for an homogeneous

The aeronautical structures manufactured by composite laminates experience damage as a result of the severe thermal and chemical conditions to which they are subjected during flight. Microcracks are one of the most common manifestations in terms of damage. Therefore, the study of its generation and

The next meeting of “Women in 3 Printing” will take place at IMDEA Materials, on October 24th, at 5:45 p.m. Some of our researchers will present the projects they are working on, and then will be a tour of the facilities of the Institute.  Thanks to María Teresa Pérez Prado for the

Abstract The commercial aviation industry is a field of innovation and vanguard technology application, in which competitiveness is a critical need. As a consequence, new materials and techniques take place continuously with the purpose of creating a significant advantage in relation to other

Abstract: Dye-Sensitized Solar Cells (DSSCs) are a promising alternative to Si solar cells, with efficiencies of 14% under sunlight and 28.9% under ambient light. DSSCs’ components can separately be optimized. One of the major challenges is replacing Pt-counter-electrode (CE), due to its

The PhD Defense will take place, at 11:00, on next Monday,16th of September, in the "Sala adoración de Miguel 1.2.c.16" of the Carlos III University of Leganes. The dissertation is entitled “Wettability and infiltración of liquid Silicon on serveral substrates”. It was advised by Prof. José

Abstract: Carbon nanotubes, graphene and graphene oxides have been under development due to their suitable properties to be applied in electrochemical energy devices such as supercapacitors, batteries and fuel cells. Recently, carbon nanostructures doped with heteroatoms have demonstrated to play

Abstract: Crystal mechanics (CM) models, are increasingly used in engineering applications to obtain microstructure-sensitive mechanical response of polycrystalline materials. Full‐field CM formulations based on Fast Fourier Transforms (FFT) are an efficient alternative to CM

The PhD Defense will take place, at 12:00, on next Monday 29th of July, in the Civil Engineering School of the UPM (Sala Verde Caminos). The dissertation is entitled “A study of the factors influencing air removal in Out-of-Autoclave processing of composites”.  It was advised by Prof. Carlos D.

The PhD Defense will take place, at 12:00, on next Tuesday 18th of June, in Carlos III University (Leganes) in the "Aula de Grados Padre Soler" The dissertation is entitled "Effect of Graphene Nanoplatelets and Carbon Nanotubes in PEEK and PEEK/Carbon Fibre Composites" Here is the link of the

Abstract Magnesium batteries are superior to all the known battery systems owing to its substantially larger volumetric capacity, environmental benignity, electrochemical stability and lower cost. This study is focused on the improving the electrochemical characteristics of Magnesium based

Decades of academic research has gone into developing ultrafine eutectic and near-eutectic alloys of the systems Ti-Fe-Sn-Nb, Ti-Fe-Co, Fe-Ti-Si, Fe-Ti-Zr-B, etc., with remarkable mechanical properties. However, no conventional casting process exists that can provide high enough cooling rates

Micromechanical response during biaxial load path changes of stainless steel: insitu neutron diffraction and multi-scale modeling Manas V. Upadhyay1,*, J. Capek2, Anirban Patra3, Wei Wen4, Tobias Panzner2, Steven van Petegem5, Carlos N. Tomé4, Ricardo A. Lebensohn6, Helena van

Abstract: Virtual testing by means of progressive damage and failure analysis (PDFA) of composite structures holds the promise of reducing the timeline for certification of composite structures by complementing experimental testing. The focus of this talk is on recent investigations conducted at

The PhD Defense will take place, at 12:00, on next Thursday 28th of March, in the Seminar Room of the "Escuela de Caminos, Canales y Puertos" of the UPM. The dissertation is entitled "Fast Mapping of Microstructure and Mechanical Properties in Titanium Alloys by Kinetic Diffusion Multiple