Search Results for: I – Page 5

PhD Defense of Nana Chen entitled “Tuning the mechanical properties of metastable beta titanium alloys through the control of microstructure and deformation mechanisms”– 23rd of March, 2022.

The PhD Defense will take place on the 23rd of March, at 9:30 am, online. The dissertation is entitled “Tuning the mechanical properties of metastable beta titanium alloys through the control of microstructure and deformation mechanisms”. It was advised by Prof. Jon Molina. The assistance will

PhD Defense of Andrea Fernández entitled “Recovery and re-use of carbon fibres from recycled end-of-life epoxy based composites” – April 1st, 2022.

The PhD Defense will take place on the 1st of April, at 11:00 am in room “3.S01.08 “of the University Carlos II of Leganes in Madrid. The dissertation is entitled “Recovery and re-use of carbon fibres from recycled end-of-life epoxy based composites”. It was advised by Prof. Jon Mikel

First Year Assessment of María Dolores Martin, entitled “Microstructure-Topology-Mechanical Properties relationship of 3D printed Mg-based scaffolds for biomedical applications (TOPOMAG-3D)” – 18th of March, 2022 – 12:00 pm

Abstract: Magnesium and its alloys are promising biodegradable metal scaffolds for potential bone regeneration applications, such as bioabsorbable implants. However, for this to be possible, further developments are necessary. On the one hand, Mg tends to corrode at a high rate, leading to

(MIMMOSA) MICRO/MACRO-MODELING OF SOLIDIFICATION IN ADDITIVE MANUFACTURING

Funding: Ministerio de Ciencia e Innovación. Proyectos de Colaboración Internacional - 2021Region: SpainProject period: 2022 – 2024Supervisor: Dr. Damien Tourret (damien.tourret@imdea.org); Fellow: Rouhollah Tavakoli (rouhollah.tavakoli@imdea.org)Metal Additive Manufacturing (AM) has an enormous

IMDEA Materials in the Fair Madrid for Science and Innovation.

From the 2nd to the 5th of March, the Fair Madrid for Science and Innovation will be held at the Trade Fair Institution of Madrid (IFEMA) within the framework of the education week. IMDEA Materials participates actively in this important dissemination event for Madrid´s region, the 4th and 5th

(AM2SoftMag) Additive Manufacturing of Amorphous Metals for Soft Magnetics

Project details Funding: Horizon Europe. EIC Pathfinder Open 2021 Project coordinator: Universität des Saarlandes Project period: 01/03/2022 – 28/02/2026 Website: IMDEA Materials' researchers Dra. María Teresa Pérez-Prado Abstract AM2SoftMag is working toward the vision that, one day, 3D

“3rd PhD day” of IMDEA Materials

What can I do once I finish the Master? Why not do a PhD in materials? IMDEA Materials Institute invites you to learn about the relevance of doing a doctorate in a multidisciplinary and international research center through the experience of our alumni and collaborating companies such as ITP Aero,

First Year Assessment of Elahe Kazemi, entitled “Data-driven development to predict the structure-property relations of polymers with machine learning and Group Interaction Modelling” – 17th of February 2022 – 12:00 pm.

Abstract: In this research work, the combination of the data-driven approaches based on the machine learning method and the group interactions modeling is used to predict the thermomechanical and mechanical properties of the vast number of polymers. The macroscopic properties of polymers were

Seminar of Prof. Jaime Marian, visiting scientist at the IMDEA Materials, entitled “Elasto-plastic stochasticity: the role of atomic level fluctuations on mesoscale deformation properties in metals”. February 15th at 12:00 pm in the Seminar Room.

Abstract: Materials deformation is ultimately controlled by physical processes at the atomic scale. In many cases, these processes are controlled by fluctuations characterized by highly stochastic behavior. While we have learned to subsume this stochasticity into continuum laws that describe

Seminar of Dr. David Rodney, from the Institute for Light and Matter (Institut Lumière Matière – iLM) from the University of Lyon (France), entitled “Alloy plasticity: insights from ab initio and elasticity”. February 11th at 11:00 in the Seminar Room.

Abstract: Solid solution strengthening is a classical metallurgical process that has been brought to the center stage by the development of high entropy alloys. Solutes may affect dislocations at different levels, from their core structure to their long-range glide, depending on the alloy

Technology transfer and innovation office (TTIO)

How can the TTIO support you? The mission of the Technology Transfer and Innovation Office (TTIO) of the IMDEA Materials Institute is to promote the transfer of our technology and intellectual property for society’s use and benefit while generating income to support further our research

First Year Assessment of Guillermo Dominguez, entitled “Degradation studies and biological cytocompatibility of biodegradable materials for tissue engineering application” – 4th of February 2022 – 12:00 pm

Abstract: Biodegradable materials are an option where problems related with permanent implants induce complications in the long term, especially for bone and cardiovascular application. Research have focused on different materials for these applications, such as bioceramics, polymers, metals or

A halogen free flame retardant epoxy resin composition

Patent details Status Patent protected in Spain Publication number ES 2566567 A2 Priority date 28 June 2013 Inventors De-Yi Wang, Nianjun Kang, Xiaomin Zhao Applicant IMDEA Materials Institute Transfer opportunity Technology

Seminar of Dr. Javad Kadkhodapour, from Stuttgart University, entitled “Modeling advanced materials across length scales: toward an application-specific computational design”. January 27th, at 11:00 pm in the Seminar Room.

Abstract: The combination of experiment, simulation, and data plays an important role in the development and characterization of advanced materials. In the first part of the presentation, this combination and the implications of the activities for advanced multiphase steels are described and

DELIGHTED holds third progress meeting

The DELIGHTED consortium held its third online progress meeting. Project partners presented and discussed their research activities within the last 6 months, as well as preparation of the first periodic report. The future research plans and dissemination activities were updated.

DELIGHTED third progress meeting

The DELIGHTED consortium held its third online progress meeting. Project partners presented and discussed their research activities within the past 6 months, as well as preparation of the first periodic report. The future research plans and dissemination activities were updated.

Gender Equality Plan

IMDEA Materials Institute fosters a tolerant, diverse and creative working environment respectful of all people regardless of gender, age, ethnicity, nationality, religion, sexual orientation, language or disability.The Gender Equality Plan reflects the Institute's commitment to equality and good

Seismic detection system

Patent details Status Spanish patent granted PCT filed Publication and PCT application numbers ES2913295 B2PCT/ES2022/070838 Priority date 28 December 2021 Inventors De-Yi Wang, Abdulmalik Yusuf, José Sánchez del Río Applicant IMDEA Materials Institute,

IP portfolio

The IMDEA Materials Institute is constantly developing new technologies and inventions based on the results of our R&D projects. Here you can find an online catalogue gathering the technological offer ready to be transferred to industry, other research institutions, investors or

Seminar of Dr. Jaime S. Sanchez from the University of Technology (Sweden), entitled “All-Electrochemical Graphene Composite Multilayers Deposited on Carbon Fibers and 3D-Foams for Energy Storage” – January 27th, at 12:00 pm in the Auditorium.

Abstract: Major breakthroughs in batteries would require the development of new composite materials, with a precisely controlled nanoscale architecture. These materials can be synthesized directly on the electrodes using electrochemical methods, allowing sequential deposition, high structural

IMDEA Materials Institute Alumni Interview – Eva Moreno

Dra. Eva Moreno was born in Toledo, Spain. She joined IMDEA Materials in 2009, where she completed her PhD thesis entitled “Formability of ultra-fine grained metallic materials” under the supervision of Dr. Ilchat Sabirov. Afterwards, she found a position as a metallurgist in the materials

Seminar of Prof. Bianchi Mendez from the Materials Physics Department of “Universidad Complutense Madrid”, entitled “Nano-heterostructures based on wide bandgap semiconducting oxides: Synthesis and optical properties ” – 26th of November, at 11:00 am in the Auditorium.

Abstract: Wide band gap (WBG) oxides are currently attracting a lot of attention due to both their versatility in achieving a nanostructured architecture as well as from their capability of interacting with the ultraviolet radiation. In this talk, I will present our latest results concerning the

Spin-offs

The Technology Transfer and Innovation Office of the Institute works towards channeling the most innovative ideas of our researchers into marketable solutions through the creation of spin-offs, licensing agreements and industrial partnerships. Success cases: Floatech Floatech has developed

Madrid Science and Innovation Week at IMDEA Materials 2021

One more year, IMDEA Materials will be present at the Madrid Science and Innovation Week, which will be held from November 1 to 14, 2021. This year we will make the activities in person! The activities will have the following subjects (November 4 and 11): • Trees! An extraordinary source of

Seminar of Prof. Carlos Molpecere from the Polytechnic University of Madrid (Laser institute), entitled “Laser bioprinting from single cell to tissue engineering” – 29th of October, at 11:00 am in the Seminar Room.

Abstract: Laser bioprinting is a very promising technique that has demonstrated an outstanding cell viability. With an appropriate process parameterization single cell printing is possible with high spatial accuracy. In this seminar, current developments at Laser center UPM in the field of

First Year Assessment of Junchen Xiao, entitled “Predicting the fire performance of flame retardant polymer composites with data-driven approach” – 29th of October, 2021 – 12:00 pm.

Abstract: Functional polymer composites are applied in various fields in industry and daily lives. To overcome the main weakness of polymer materials, the high sensitivity to fire and other high temperature sources, flame retardancy is requested to the polymer composites. Generally, it is to

First Year Assessment of Xiang Ao, entitled “Surface Protective Coating for enhanced fire safety and fire structural properties of Vinyl Ester Resin (VER) based Structural omposites” – 28th of October, 2021 – 12:00 pm.

Abstract: The fiber-reinforced polymer (FRP) composites are gaining increasing popularity due to their high strength to weight ratio, weight reduction properties. However, the heat/fire vulnerability of polymer-bsased tructural composites brings abrupt mechanical properties reduction with

Scientific Highlight: Computational discovery of hydrogen storage materials

IMDEA Materials has know-how and experience in developing computational high-throughput screening workflows for discovery of hydrogen storage materials. Our focus has been mostly directed towards advanced porous materials such as metal organic frameworks and related materials (Fig. 1). Our

PhD Defense of Venkata Sai entitled «Nanoscale engineered electrode materials for high performance lithium-ion batteries» – October 15th, 2021, at 11:00 am.

The PhD Defense will take place the 15th of October, at 11:00 am in the “Sala de Grados, modulo 8, Facultad de Ciencias” of the Autonomous University of Madrid. The dissertation is entitled “Nanoscale engineered electrode materials for high performance lithium-ion batteries”. It was advised by

(CNSTech) DEVELOPMENT OF GAMMA PRIME STRENGTHENED CONI SUPERALLOY FOR ADVANCED SUSTAINABLE MANUFACTURING TECHNOLOGIES

Funding: European Union, Marie Skłodowska-Curie Individual Fellowships, Horizon 2020 Programme (Grant Agreement 101028155 )                                                                                                                                                                                 

First Year Assessment of Carmen Martínez, entitled “The effect of mechanical strains on the catalytic activity of transition metals for the hydrogen evolution and the oxygen reduction reactions.” – 1st of October, 2021 – 10:00 am

Abstract: Catalysts design has been one of the most relevant issues for the hydrogen economy during decades, especially for the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR). These catalytic processes are controlled by the electronic structure of the catalyst, that can

First Year Assessment of Venkatesh Sivagnana, entitled “New high entropy alloy formulations developed using advanced powder metallurgy routes for high temperature applications” – 1st of October, 2021.

Abstract: High entropy alloys (HEAs) have recently garnered significant research attention due to the variety of properties they offer, including high strength, fracture resistance, thermal stability, wear resistance, corrosion resistance and irradiation resistance. When it comes to processing of

Seminar of Prof. Johan Christensen from the Carlos III University of Madrid, entitled “Vibrant future for acoustic and mechanical metamaterials” – 24th of September, at 12:30 pm in the Auditorium.

Abstract The boost experienced by acoustic and mechanical metamaterial research during the past years has been driven by the ability to sculpture the flow of sound waves and vibrations at will. Metamaterials, which come in all kinds of shapes and forms, have initially been designed for

Seminar of Dr. Harun Tüysüz from Max-Planck-Institut für Kohlenforschung in Germany, entitled “Tailor-made Nanostructured Catalysts for Photo- and Electro-chemical Energy Conversion” – 22nd of September, at 12:00 pm in the Auditorium.

Abstract: The particular research interest of the speaker is the design and development of well-defined nanostructured materials and studying their structure-activity relationships for sustainable energy related catalytic transformations. After a brief introduction, the focus of the first part

Seminar of Sergio Sanchez González from Northumbria University in UK, entitled “Metallic materials for biodegradable implants and antimicrobial surfaces” – 22nd of July, at 12:00 pm in the Seminar Room.

Abstract Metallic materials are of interest in the healthcare sector because they can be used for multiple applications including as biodegradable implants and as antimicrobial touch surfaces for hospitals and other healthcare settings. With an ever-increasing demand for materials that need to

DELIGHTED holds second progress meeting

The second online progress meeting was held on June 22, 2021. Project partners presented and discussed their research activities within the last 6 months, as well as preparation of deliverables. The research plans for the next 6 months were updated.

Industrial Advisory Board

The Vision of IMDEA Materials Institute is to become a leading research institute, internationally recognized for its excellence in material science and engineering and its contributions to the transformation of society. To attain this goal, IMDEA Materials has set up an Industrial Advisory Board

First Year Assessment of Isabel Gómez, entitled “Synthesis and Characterization of inorganic nanowires via Floating Catalyst Chemical Vapour Deposition” – 25th of June at 12:00, 2021.

Abstract: The work presented is the result of a year studying the growth of inorganic nanowires by floating catalyst chemical vapour deposition (FCCVD) with the objective of applying this technique to the synthesis of metal oxide nanowires. The differences between substrated-CVD and FCCVD

First Year Assessment of Lucia Cobian, entitled “Experimental-Numerical Analysis of Polymer Based Lattice Materials Fabricated with Additive Manufacturing” – 24th of June, 2021.

ABSTRACT: Lattice materials are materials constituted by the repetition of small cells composed of structural units as bars, beams or shells, which form a lattice. The cell geometry can be designed to have an outstanding macroscopic response such as very high specific stiffness or energy

PhD Defense of Mario Rueda entitled “Experimental and computational micromechanics of fibre-reinforced polymer composites at high strain rates” – June 25th, 2021. 

The PhD Defense will take place the 25th of June, at 12:00 pm in the "Sala Verde" of the Escuela de Ingenieros de Caminos, Canales y Puertos de la UPM. The dissertation is entitled "Experimental and computational micromechanics of fibre-reinforced polymer composites at high strain rates". It was

Follow Us

Linkedin-in Icon-twitter-x Youtube Instagram Facebook-f Flickr Spotify

Contact us

Phone: (+34) 91 549 34 22
Email: contact.materials@imdea.org

Location

C/ Eric Kandel, 2
Tecnogetafe
28906, Getafe, Madrid (Spain)

HOW TO ARRIVE

© All rights reserved

Privacy policy | Accesibility | Disclaimer | Ethics Channel

© Fractales