This project will study high strain rate mechanical behavior of novel Advanced High Strength Steels (AHSS). The results of these investigations will greatly contribute to understanding of mechanical behavior of the AHSS and help to reduce the dimensions of the AHSS components used in the automotive

Research Assistant: Integrated Computational Materials Engineering. Contact: evamaria.andres@imdea.org

Marcos Jimenez, PhD student at IMDEA Materials, has won the Thesis Talk Prize organized by the Carlos III University of Madrid (UC3M). Thesis talk consists on presenting the subject of a PhD thesis to a general audience in 3 minutes. This event is part of the transversal credits organized by

Research Assistant: Recycling Composite Materials. Contact: andrea.fernandez@imdea.org

Research Assistant: Development of advanced high-strength steels. Contact: pablo.garcia@imdea.org

Proyect Manager. PhD: University of Vigo, Spain. Contact: eduardo.troche@imdea.org

Javier LLorca, Professor of Materials Science of the Technical University of Madrid and director and founder of IMDEA Materials Institute has been elected to the Board of Directors of the Society of Engineering Science (SES). Founded in 1963, the Society of Engineering Science is a non-profit

Research Assistant: High-strength steels. Contact: miguelangel.valdes@imdea.org

Dr. De-Yi Wang has been recently elected Fellow of the Royal Society of Chemistry (RSC). Founded in 1841, RSC is the largest organization in Europe for chemical scientists and advancing the chemical sciences. RSC partners with industry and academia, advises governments on policy, and promotes the

DYNACOM is an European Industrial Doctorate (EID) programme focused on the design of the next generation of structural composite materials for high strain rate applications. Two of the major milestones of this EID are: (1) to offer 2 Early Stage Researchers (ESRs) a multidisciplinary and

Researcher: Electrochemistry. PhD: Dublin Institute of Technology. Contact: vinodkumar.etacheri@imdea.org

This project concerns the development of technologies for local hybridization in cases where it is necessary (e.g. hybridization during tow spreading). New techniques will be used as the tow spreading, hybrid unidirectional tapes or laminates combining layers of different thickness (thin and

EMULATE project proposes a multidisciplinary approach to enhance the comprehension of metal machining. For that, the following three topics will be analyzed in order to improve this technology: 1) the development of accurate material models that incorporate the mechanisms of plasticity at the

The goal of the EXTECP project, funded by the China Scholarship Council, is the development of coupled thermomechanical crystal plasticity models to simulate problems under extreme conditions: very large strain rates and high temperatures. See the whole description of the EXTRECP project.

Researcher Associate: Virtual designing of light alloys. PhD: Mississippi State University. Contact: amitava.moitra@imdea.org

Research Associate: Novel processing of Fe-Al intermetallics. PhD: Autonomy University of Barcelona, Spain Contact: anna.hynowska@imdea.org

PhD: University of Monash, Australia. Contact: hong.liu@imdea.org

Our Institute participates in COST action MultiComp, which is designed to bring together theorists, experimentalists and industrialists in the field of nano-carbon materials technology. See the whole description of the MultiComp network.

CRIRCEM proposes the design and processing by powder metallurgical routes of new materials for cutting tools with total substitution of the traditional cobalt binder by other more economic and less toxic. See the whole description of the CRIRCEM project

In recent years, large spills from oil pipelines and tankers, leaks from nuclear reactors and the constant need for lighter, stronger, and safer materials in the transportation industry illustrate how breaks or cracks (fracture) can have detrimental effects in terms of health and safety, the

Position: Financial Manager Degree in Business Administration, UAM,  Spain Master in Finance, ESADE, Barcelona Contact: mar.garcia@imdea.org

OptiQPAP is an European project funded by the Research Fund for Coal and Steel. The OptiQPAP project focuses on the intelligent microstructural design in the high strength Q&P steels for simultaneous improvement of various performance and mechanical properties, which are required for their

Near Beta Ti project is firstly aimed at processing the selected near beta Ti alloy by high pressure torsion, characterizing the grain size and phase distribution of the resulting microstructures and measuring their mechanical behaviour. In addition, the development of phase transformations in near

Dr. Juan José Vilatela, leader of the research program on "Nanomaterials for Multifunctional Applications" at IMDEA Materials, leads this prestigious ERC Starting Grant from the European Union. Dr. Vilatela and his research group will develop new multifunctional structural composite materials that

From 15th to 17th June at IMDEA Materials Institute the international congress “Research, Innovation and Leadership at the Crossroads of Science, Engineering and Medicine” will be held.  Experts worldwide will analyze interdisciplinary research for the future at the point of intersection

The objective of this investigation, with a focus on the Co-base high temperature alloys and funded by the China Scholarship Council, aims at developing a robust high throughput diffusion couple technique. The new technique will enable fast mapping of such information as phase

The objective of this investigation, funded by the China Scholarship Council, is to develop high performance reinforced fire-retardant polymers via special molecular design, chemical functionalization of the reinforced fibers and advanced polymer processing. The fire behaviours, mechanical

Position: Predoctoral Researcher Master of Science in Aerospace Engineering. Delft University of Technology, The Netherlands Research "Virtual Design, Virtual Processing and Virtual Testing of Metallic Materials"

IMDEA Materials Institute has been awarded a European Industrial Doctorate (EID) to train 2 PhD students together with Hexcel Corporation and Micro Materials Ltd in the field of dynamic behaviour of composite materials for next generation aeroengines. Job vacancies will

As recognition of his scientific experience, he has been distinguished as Guest Professor of this University regarded as one of the 20 most important in China. He will advise  the university on research and internationalization strategies. Check the complete text in the website of the

FIREINF is a research collaboration between IMDEA Materials Institute and FIDAMC with the goal of developing an effective novel halogen-free fire retardant epoxy system to be used in out-of-autoclave processes to manufacture composite components/structures. This fire retardant epoxy resin

This collaborative R&D project, led by Grupo Antolín with the participation of other companies from the automotive sector, aims at developing a new modular concept of advanced seat, removable, with ultralight structure obtained by more efficient and flexible transformation process, and

The success of the contest has been possible by all of the employees´s participation. Divided by categories, the winners are: Bartolomé Mas: 1st prize Materials Characterization Miguel Herráez: 1st Prize Materials Simulation Olben Falcó: 1st Prize Open Subject Marta Carton: Public

As part of the European project MICROMECH, carried out in collaboration with Industria de Turbopropulsores (ITP), the following results have been obtained Development of a new methodology for experimental characterization at the micro scale. This methodology is based on micropillar compression as

Report on IMDEA Materials Institute's activities throughout year 2015 is available for download. Download IMDEA Materials Institute annual report 2015

FUTURALVE is a national R&D collaborative program carried out by a consortium of companies and led by ITP. The goal of the project is to create new materials and advanced fabrication technologies for the new generation of high speed turbines. Check FUTURALVE project description Check related

Position: Postdoctoral Researcher Phd:  Engineering  Sciences Polytechnic school of Louvain, Université catholique de Louvain (UCL), Belgium Research "Virtual Design, Virtual Processing and Virtual Testing of Metallic Materials"

 R&D Project Manager Graduated in Molecular Biology  University of Córdoba, Spain fernando.gomez@imdea.org

IMDEA Materials Institute will coordinate the European project OptiQPAP (Optimization of QP steels designed for industrial applications), funded by the Research Fund for Coal and Steel (RCFS, which is part of the Horizon 2020 framework programme). The Technological Centre CTM,

Position: Researcher Associate PhD: Mondragón University, Spain Research: "Testing and Simulation of Advanced

EQUINOX is an European project funded by the Horizon 2020 programme of the European Union. The main objective of EQUINOX is to develop a novel process that allows to substitute Cr/Ni based (stainless) steel parts used in high volume end consumer products such as in the lock industry,

Predoctoral Researcher  Aeronautical Engineer Polytechnic University of Madrid Research "Vacuum assisted infiltration, microfluid flow, X-ray tomography, polymer-matrix composites"

Dr. Juan José Vilatela, Head of the Multifunctional Nanocomposites research group at IMDEA Materials Institute, has obtained the prestigious ERC Starting Grant from the European Research Council. Dr. Vilatela will receive € 1.5 million along the next 5 years to

Research Assistant Chemical Engineer University of Almeria, Spain

REDISH is an European project funded by the Clean Sky Joint Technology Undertaking 2 within the Horizon 2020 programme of the European Union. The goal of the REDISH project is the development and maturation of innovative shielding able to sustain impacts from high and low energy debris caused by

The defense of the PhD thesis of Francisca Martínez " "Multiscale analysis of the mechanical behaviour of needle-punched nonwoven fabrics"   will take place on Friday, February 5th at 12 noon at the E. T. S. de Ingenieros de Caminos of the Polytechnic

Predoctoral Researcher Industrial Engineer Universidad del País Vasco, Spain Research - "Multiscale Plasticity"

The defense of the PhD thesis of José Luis Gómez-Sellés entitled "Atomistic modeling of Ge damage accumulation, amorphization and solid phase epitaxial regrowth" supervised by Dr. I. Martín-Bragado and Dr. Javier Segurado will take place on Friday, January 15th

Organized by IMDEA Materials Institute and the Carlos III University of Madrid, was held in Leganés, on the campus of the University, between 14 and 18 December, the Congress in Advanced Materials and Processing Technologies AMPT2015. The congress was attended by 450 people from over 50 countries

The PhD Thesis entitled "Continuum models of the mechanical behavior of rolled and die-cast magnesium alloys", carried out by Dr. Ana María Fernández at IMDEA Materials Institute under the supervision of Drs. Maria Teresa Pérez-Prado and Antoine Jérusalem, has

Predoctoral Researcher Degree in Chemistry Universidad Autónoma de Madrid, Spain Research: "In silico synthesis of new materials"

IMDEA Materials Institute, TOLSA S.A. and the CELLMAT laboratory are developing, within the project NEOADFOAM, novel fire retardant additives capable of improving at the same time the thermal insulation, mechanical and fire resistance properties of expanded polystyrene and rigid polyurethane

Position: Researcher Associate PhD: Universidad de Barcelona Research: "Hybrids based on carbon nanotube fibres" Contact: laura.cabana@imdea.org

Whithin the framework of the coordinated project COMETAD, a new numerical tool for fire retardants will be developed. IMDEA Materials Institute main contribution in the project will to validate the numerical tool by performing a set of tailored lab-scale fire tests. See COMETAD project description.

Dr. Irene de Diego Calderon has received the Young Academics’ European Steel Award from the Association of German Steel Manufacturers (VDEh) for her PhD thesis “Mechanical properties of advanced high-strength steels produced via quenching and partitioning”, which has been

Dr. De-Yi Wang, head of the High Performance Polymer Nanocomposites group at IMDEA Materials Institute, has been selected as Associate Editor of "RSC Advances" since October 2015. RSC Advances is a high impact journal of the Royal Society of Chemistry. RSC Advances is an international,

Position: Researcher Associate PhD: Physics, Universidad Autónoma de Madrid Research: "Thermodynamics and Atomistics

A FEG S/TEM microscope is now available at IMDEA Materials Institute. The system (Talos F200X, FEI) combines outstanding high-resolution S/TEM and TEM imaging with an energy dispersive x-ray spectroscopy (EDS) integrated system fully compatible with high-resolution 3D tomography.  It is also

Prof. Javier LLorca, Director of IMDEA Materials Institute, leads this prestigious ERC Advanced Grant from the European Union. Prof. Llorca and his research group will receive develop multiscale modeling strategies along the next 5 years to carry out virtual design, virtual processing and virtual

IMDEA Materials has received the “HR Excellence in Research” award, which acknowledges our institute as a provider of a stimulating and favourable work environment. The award reflects our commitment to continuously improve human resource policies in line with the European Charter for

Predoctoral Researcher Degree in Material Forming and Control Engineering Hunan Institute of Engineering, China Research: "Design and Processing Cobalt-Base Superalloys"

The main objective of CRISTAL project, funded by the CAPES Foundation, is to improve corrosion resistance of commercial Zamac 8 alloy (Zn-4Al-2,6Cu-0,5Mg) by microstructure control which will be achieved by varying the Cu content, the solidification rate, heat treatments and the combination of

A micro compounder is now available at IMDEA Materials Institute. The system (MC 15, Xplore) is equipped with co-rotating and counter-rotating screws. It is suitable for compounding thermoplastic based materials or polymeric materials with minute amounts of costly synthesized materials and

Position: Research Associate PhD.: Aerospace Engineering. Technical University of Madrid,  Research: Blade Impact/Small Fragment Impact/Ice

Whithin the framework of the coordinated project NEOADFOAM, IMDEA Materials Institute will mainly select fire retardant additives capable of improving at the same time the thermal insulation, mechanical and fire resistance properties of expanded polystyrene and rigid polyurethane foams. See

A Gel Permeation Chromatographer (GPC) is now available at IMDEA Materials Institute. The system (Waters) consists of a Waters 2414 refractive index detector, a Waters 2489 UV/Visible detector, a Waters 1500 column heater, and a series of Waters polystyrene GPC columns. It is used to determine

MicroTest is an industrial contract with the European Powder Metallurgy Association (EPMA) to study the mechanical properties and the fracture behavior in correlation with the microstructure using real parts and specimens produced in industrial conditions. See MicroTest project description.

An X-ray diffractometer is now available at IMDEA Materials Institute. The system (Empyrean, PANalytical) allow for phase analysis, texture, and residual stress determination, as well as reflectometry. It is equipped with a state-of-the-art X-ray platform for the analysis of powders, thin films,

Position:  Senior Reseacher PhD:  University of Gdansk, Poland Research:  Computational and Data-Driven Materials Discovery Address:  C/ Eric Kandel, 2. Getafe, Madrid

A RAMAN micro-spectroscopy system is now available at IMDEA Materials Institute. This system (Renishaw PLC) obtains the vibrational spectra of the molecular bonds. It is fully equipped with a Leica DM2700 microscope with 5x, 20x, 50x, 100x objectives, a 532nm Nd:YAG laser (50 mW at 532 nm) and a

IMDEA Materials Institute, in cooperation with the R&T Materials & Processing unit of AIRBUS Operations, has completed the first validation trials at AIRBUS Getafe facilities of an alternative curing technology for commercial epoxy resins/adhesives by passing an electrical current trough

Position: Visiting Researcher Ph.D. in Materials Science and Engineering  McMaster University, Hamilton, Ontario, Canada Short Bio Prof. Weck obtained his Bachelors and Masters degrees in Materials Science and Engineering from INSA-Lyon in France, his Ph.D. in Materials Science and

Position: Visiting Researcher Ph.D. in Engineering Sciences (Structural Engineering)  University of California, San Diego, USA. Professor of Structural Engineering, Michigan State University Research Interests Multiscale assessment and design of tailored materials, devices and structures.

Prof. Javier LLorca, Director of IMDEA Materials Institute, has obtained the prestigious ERC Advanced Grant from the European Union. Prof. LLorca will receive € 2.5 million along the next 5 years to develop multiscale modeling strategies to carry out virtual design, virtual processing

Position: Instrument Scientist PhD Physics University of Sevilla  Transmission Electron Microscopy of Advanced Materials

The PhD Thesis entitled "Mechanical Behavior of Hybrid 3D Woven Composites", carried out by Dr. Raúl Muñoz at IMDEA Materials Institute under the supervision of Dr. Carlos González and Prof. Javier Llorca, has been awarded by the Spanish Association of Composite

Mr. Mehdi Rahimian will defend his PhD thesis entitled "Physical simulation of investment casting of Mar-M247 Ni-based superalloy" next Monday 13th  of July, at 12:00 h in Carlos III University,  (aula de Grados), Leganés Campus  (Madrid).

Predoctoral Researcher Degree in Materials Engineering Polytechnic University of Madrid Research: Steel development using high throughput methods

Rocío Muñoz, alumni of IMDEA Materials Institute, has received the 3rd prize in the 2014 Zwick Science Award for her paper entitled “Analysis of crystallographic slip and grain boundary sliding in a Ti–45Al–2Nb–2Mn (at%)–0.8 vol%TiB2 alloy by high

Online RTM is a research collaboration between IMDEA Materials and AIRBUS Operations aiming at analyzing sensor information during Resin Transfer Molding (RTM) injection to assess the quality of composite parts. The incorporation of this new technology in the manufacturing process will lead to

Predoctoral Researcher Degree in Materials Engineering Polytechnic University of Madrid Research: Up scale simulation of plasticity in metals

VIRTEST is an industrial contract with Fokker Aerostructures to develop a novel multiscale simulation strategy to predict the mechanical behaviour of aeronautical composite laminates structures under static and low-velocity impact loads. VIRTEST will lead to a significant reduction in the number of

Predoctoral Researcher Degree in Materials Engineering Salamanca University, Spain Research: Composite Materials

IMDEA Materials Institute, STMicroelectronics, one of the world’s largest semiconductor companies, and the French Alternative Energies and Atomic Energy Commission (CEA) have recently signed a partnership agreement to perform a join research project in the field of microelectronics. This three

IMDEA Materials Institute and the School of Materials Science and Engineering of NanJing Tech University (China) signed a memorandum of understanding past 14/05/2015. Both organisations want to pursue and promote joint research and development activities of mutual interest in multiscale

An arc furnace is now available at IMDEA Materials Institute. This equipment (Arc 200, Arcast Inc.) allows melting, alloying, casting, rapid solidification and atomization of reactive and high melting point elements and alloys up to 3500°C using a clean ceramic free cold crucible process.

Position: Project Manager Degree in Industrial Electronic Engineering, University of León, Spain MBA: International University of La Rioja, Spain

Our internationalization strategy, based on mid-long term partnerships with key companies, highlighted in madri+d website. Read the whole story (ES)

Position:  Research Assistant MSc Universidad Pontificia Católica de Rio Grande do Sul, Brazil Research: Solidification processing and properties of Zn-Al hypoeutectic alloys

The collaboration between IMDEA Materials and Fokker Aerostructures has just been showcased in NetComposites journal (link to the article in NetComposites). The bilateral project VIRTEST, headed by Dr. Claudio Lópes, will lead to an improved understanding of the material behavior and the

Position:  Research Assistant MSc: Delft University of Technology Research: High temperature deformation behaviour of Cu/Nb nanoscale metallic multilayers

Report on IMDEA Materials Institute's activities throughout year 2014 is available for download. Download IMDEA Materials Institute annual report 2014

IMDEA Materials Institute participated past April 8th in the 1st ITP workshop - Technology Centres. During this meeting, participants discussed the research strategy of the company for next 10 years concerning jet engine research.

A nanoindenter stage to carry out mechanical tests inside a Scanning Electron Microscope (SEM) for the in-situ observation of the deformation mechanisms is now available at IMDEA Materials Institute. This system (PI 87 SEM PicoIndenter, Hysitron) allows the simultaneous acquisition of the

A linear density, crimp and tensile tester for single fibres is now available at IMDEA Materials Institute. This system (FAVIMAT+, Textechno) can be used to characterize mechanical properties of single fibres. It can measure the mechanical resistance, lineal density and crimp. In addition, it is

IMDEA Materials Institute launches the second call for the recruitment of final year and master students who wish to carry out a three month research internship (between June to September 2015) in an international and multidisciplinary environment under the supervision of a senior scientist. These

AMPI International (non-profit professional society which promotes the advancement of powder metallurgy (PM) and particulate materials as a science) recognizes the work of Prof. José Manuel Torralba (Deputy Director of IMDEA Materials). The 2015 AMPI fellow award recipients will receive

Position:Visiting Research Associate PhD.: Polytechnic University of Madrid Research: Computational solid mechanics Contact: david.portillo(AT)imdea.org

The PhD Thesis entitled "High Temperature Mechanical Behavior of Al/SiC Nanoscale Multilayers" and “In-situ analysis of the high temperature deformation and fracture mechanisms of a ɣ-TiAl alloy", carried out by Drs. Saeid Lotfian and Rocío Muñoz at IMDEA

A Micro-scale combustion calorimeter is now available at IMDEA Materials Institute. This system, maufactured by Fire Testing Technology performs rapid laboratory scale test of the flammability of materials on milligram quantities (in the order of mg) according to standard ASTM D7309-07. Check the

Prof. José Manuel Torralba, Deputy Director of IMDEA Materials Institute and head of the Solid State Processing group, has been elected member of the Editorial Board of Powder Metallurgy Journal, an international journal publishing peer-reviewed original research on the science and practice

Planetary mills are now available at IMDEA Materials Institute. The systems (PULVERISETTE 6 classic & 7 premium, FRITSCH) allows for grinding a wide variety of sample materials down to the nano range (rotational speeds up to 1000 rpm in model PULVERISETTE 7). Check the whole processing

IMDEA Materials Institute has received a grant (PTR-2014-0406) for the Spanish Ministry of Competitiveness and Innovation (MINECO) to manage the Spanish Technological Platform for advanced Materials and Nanomaterials (MATERPLAT) in the period 2014-2015. More details and information about this

The PhD Thesis entitled "High Temperature Mechanical Behavior of Al/SiC Nanoscale Multilayers" and “In-situ analysis of the high temperature deformation and fracture mechanisms of a ɣ-TiAl alloy", carried out by Drs. Saeid Lotfian and Rocío Muñoz at IMDEA Materials

Position: Laboratory Technician BSc.: Telecommunications Engineering, Valencia University, Spain Contact: david.maldonado(AT)imdea.org

Two new R&D projects belonging to the Madrid R&D technology programme have just been awarded to IMDEA Materials Institute. IMDEA Materials will coordinate the DIMMAT project (Multi-scale design of advanced materials), led by Dr. Maria Teresa Pérez-Prado.  Our research center is

Position: Research Associate PhD.: Autonomous University of Barcelona, Spain Research: Monte Carlo simulation of epitaxial growth for semiconductors Contact: juanpablo.balbuena(AT)imdea.org

Position: Research Assistant MSc.: Shanghai Jiang Tong University, China Research: New Generation Fire Retardant Materials Contact: zhi.li(AT)imdea.org

Position: Research Associate PhD.: University of Science and Technology of China, China, USA Research: Environmentally friendly fire retardant nanocomposites Contact: junhao.zhang(AT)imdea.org

Whithin the framework of the coordinated project Ferro-GENESYS, IMDEA Materials Institute will model irradiation damage and nanoscale mechanical charaterisation in ODS FeCrAl and FeAl(Cr/Zr) heat resistant alloys. Ferro-GENESYS prokect is led by Dr. Ignacio martín-Bragado, head of the

Position: Research Associate PhD.: University of Maryland, USA Research: Experimental characterization and numerical modelling of composites Contact: sandip.haldar(AT)imdea.org

Two Ph.D students (Qian Liu and Chuanyun Wang) joined IMDEA Materials Institute along September 2014. Their research projects, CUCCOMP and SreenDM respectively, are funded by the China Scholarship Council.

Position: Research Assistant MSc.: Northwestern Polytechnical University, China Research: High throughput diffusion and phase transformation

Past august 2014, Dr .De-Yi Wang, head of High Performance Nanocomposites group at IMDEA Materials Institute, was elected “External Scientific Member” (IPF Fellow) at the Leibniz Institute of Polymer Research Dresden (IPF). IPF is one of the leading and largest polymer research

XMART is an industrial collaboration between Industria de Turbopropulsores S.A. and IMDEA Materials Institute aiming to study the effect of porosity and its distribution on MAR-M-247 tensile and fatigue test specimens. See XMART project description.

Position: Research Asistant (visiting) MSc.: University of Science and Technology Beijing, China Research: Metal matrix composites

Position: Research Asistant MSc.: Lomonosov Moscow University, Russia Research: Nanostructured supercapacitors Contact: evgeny.senokos(AT)imdea.org

A fatigue testing system is now available at IMDEA Materials Institute. The system (INSTRON 8802, INSTRON) allows a broad range of static and dynamic test applications from basic metals to larger scale component testing. Typical applications of this servohydraulic machines include fracture

Position: Research Associate PhD.: Katholieke Universiteit Leuven, Belgium Research: Multiscale modeling of composites Contact: jian.xu(AT)imdea.org

SIMUFOING is an industrial contract between Industria de Turbopropulsores S.A. (ITP) and IMDEA Materials Institute to develop new simulation techniques that can be used to predict damage on plane engines due to the ingestion of hail and birds. See all projects in the Integrated Computational

The paper entitled "Understanding the contribution of the microstructure in the fracture behaviour of sintered steels" by Prof. José M. Torralba, Deputy Director at IMDEA Materials Institute, has been awarded EPMA Keynote Paper at Euro PM2014 Conference. Euro PM2014

Position: Research Assistant MSc: TUDelft, The Netherlands Research: Characterization, design and optimization of  dispersed-ply laminates Contact: peyman.mouri(AT)imdea.org

Position: Research Assistant MSc: TUDelft, The Netherlands Research: Buckling and failure optimization of stiffened tow-steered composite panels Contact: momchil.jeliazkov(AT)imdea.org

A drop weight impact test system is now available at IMDEA Materials Institute. The system (INSTRON CEAST 9350, INSTRON) is designed to deliver 0.59 -757 J of energy. This instrument can be used to test any type of materials from composites to finished products, and is suitable for a range of impact

Position: Visiting Scientist PhD: Sichuan University, China Research: Bio-based Fire Retardant Materials Contact: yun.liu@imdea.org

IMDEA Materials Institute has just begun a research project financed by Hexcel. Hexcel is one of the main manufacturers of advanced composite materials for aerospace, defense, wind and industrial sectors. AROOA project will be developed in collaboration with Hexcel R&T centre in the United

IMDEA Materials institute has an opening for a Researcher (tenure-track position) in the area of X-ray characterization of materials. More details and application process

Position: Research Associate PhD: University of Manchester, UK Research: Crystal plasticity modeling Contact: david.gonzalez(AT)imdea.org

Dr. Ilchat Sabirov, head of the Physical Simulation group at IMDEA Materials Institute, has received the Young Researcher Award for outstanding contribution to nano-severe plastic deformation research at the NanoSPD6 conference held past June 30 – July 4 2014 in Metz (France). 

Silicio Ferrosolar S.L., part of Ferroatlantica S.L. group, has signed an R&D contract with IMDEA Materials Institute to optimize the production of solar-grade silicon via purification in high vacuum furnace. More details on SICASOL project

B/E AEROSPACE Inc., worldwide leading manufacturer of aircraft passenger cabin interior products, has signed a three-year long R&D contract with IMDEA Materials Institute to to develop innovative materials for aircraft interiors based on advanced polymers and macroscopic fibres. The aim is to

Position: Research Assistant BEng: Carlos III University of Madrid, Spain Research: Solidification and casting Contact: almudena.casado(AT)imdea.org

IMDEA Materials Institute has achieved great success in the last calls of the National fellowships programmes. Two researchers will join the “Ramón y Cajal” programme (2013 call) and one will join the postdoctoral fellowship programme (2013 call).

Position: Research Assistant BEng: Tecnun, Spain Research: Voids in out-of-autoclave prepregs Contact: juanjose.torres(AT)imdea.org

Position: Visiting Scientist PhD: Central South University, India Research: Computational Alloy Design Contact: jiang.wang(AT)imdea.org

Mr. Saeid Lotfian will defend his PhD thesis entitled "High Temperature Mechanical Behavior of Al/SiC Nanoscale Multilayers" next Monday 30th of June at 12:00 h in Carlos III of Madrid (video room 3.1.S08, Leganés campus (Madrid)). His work has been supervised by Dr. Jon Mikel

The poster entitled "Object Kinetic Monte Carlo studies of materials under helium ions irradiation", presented by Ms. Laura Agudo has been awarded at COSIRES 2014 conference. COSIRES (Computer Simulation of Radiation Effects in Solids) is a major international forum to present and discuss

Position: HHRR Project Manager Contact: rosa.bazan(AT)imdea.org

Size effect in LiF plasticity: new insights into the lattice resistance contribution - 16 Jun 2014

Position: Research Assistant BEng: Technical University of Madrid, Spain Research: Modeling of ice impact on jet turbines Contact: daniel.pozo(AT)imdea.org

Position: Research Assistant MSc: Technical University of Madrid, Spain Research: High performance nanocomposites Contact: sergio.dejuan(AT)imdea.org

Dr. De-Yi Wang, head of the High Performance Polymer Nanocomposites group at IMDEA Materials Institute, has been selected as Associate Editor of Nanomaterials and Energy journal. Nanomaterials and Energy is an international peer viewed journal that issued by Institution of Civil Engineers (ICE)

IMDEA Materials Institute has awarded four Research Initiation Fellowships (1st call). See list of fellowships awarded

Position: Research Associate PhD: University Hyderabad, India Research: Novel Fire Retardant Polymers Contact: vignesh.heeralal(AT)imdea.org

An article on the difficulties some of our foreign researchers face when coming to Spain has been published in “El Mundo”newspaper (nationwide publication).

A dual column tabletop testing system is now available at IMDEA Materials Institute. The system (INSTRON 5966, INSTRON) has 10 kN of capacity and 1756 mm of vertical test space. This equipment is a universal, static testing system that performs tensile and compression testing; and also

Position: Research Associate PhD: University of Girona, Spain Research: Modelling of non-conventional composites Contact: olben.falco(AT)imdea.org

Position: Research Associate PhD: V. Lashkarev Institute of Semiconductor Physics, Ukraine Research: Epitaxial growth of SiGe and III-V materials Contact: andrey.sarikov(AT)imdea.org

Position: Accounting Assistant Contact: vanessa.hernangomez(AT)imdea.org

Position: Research Assistant MSc: Carlos III University of Madrid, Spain Research: Electric curing of CNT/epoxy resins Contact: juancarlos.fernandez(AT)imdea.org

Position: Research Associate PhD: University of Navarra, Spain Research: Multiscale plasticity Contact: edison.bonifaz(AT)imdea.org

DMAPOL is an industrial contract between ACCIONA Infraestructuras and IMDEA Materials Institute to perform Dynamic Mechanical Analyses (DMA) in polymeric materials. See DMAPOL project description

Position: Research Assistant MEng: Carlos III University of Madrid, Spain Research: Micromechanics of Ni superalloys Contact: marcos.jimenez(AT)imdea.org

Metallurgical and Materials Transactions A publishes a total of eight papers from TKM-2013 workshop in its Issue 4, April 2014. The selected papers (see list below), starting with a review in phase-field modeling of polycrystalline solidification, principally appear in order consistently with the

Report on IMDEA Materials Institute's activities throughout year 2013 is available for download. Download IMDEA Materials Institute annual report 2013

NEW EPOXY project will develop novel Graphene Oxide/Layered Double Hydroxide (GO/LDH) hybrids as multifunctional reactive fire retardants for epoxy resins. NEW EPOXY is a Marie Curie Action (International Incoming Fellowship, IIF) funded by the 7th Framework Programme of the European Union. See NEW

The awards giving event of the 3rd IMDEA Materials Scientific Imaging Contest was held last Friday 14th of March. Competition was divided in three categories (materials characterization, materials simulation and open subject) and more than 100 photos were received. Winners of the 3rd edition were

Position: Research Associate PhD: Università di Bologna, Italy Research: Organic synthesis and multifunctional polymers Contact: carmine.coluccini(AT)imdea.org

The High Performance Nanocomposites group lead by Dr. De-Yi Wang participates in COST action MP1105: Sustainable flame retardancy for textiles and related materials based on nanoparticles substituting conventional chemicals (FLARETEX). Dr. De-Yi Wang was appointed as the National Representative from

During the past TMS2014 annual meeting and exhibition (San Diego, USA, 16-20/02/2014), Dr. Yuwen Cui was appointed as committee member of the ASM Alloy Phase Diagram (APD) for the next three years. ASM International is a materials science and engineering society where materials users,

MODENA is an European project funded by the 7th Framework Programme of the European Union. MODENA aims at developing, demonstrating and assessing an easy-to-use multi-scale software-modeling framework application under an open-source licensing scheme that delivers models with feasible computational

Position: Research Assistant MSc: Ferdowsi University of Mashhad , Iran Research: Multiscale modelling of PU foams Contact: mohammad.marvi(AT)imdea.org

IMDEA Materials Institute starts COMPOSE3 project, based on the use of new materials to replace today’s silicon, and on taking an innovative design approach where transistors are stacked vertically, known as 3D stacking. IMDEA Materials Institute will use Lattice Kinetic Monte Carlo to

IMDEA Materials Institute logo (size is 50 µm x 40 µm) fabricated using a FIB-FEGSEM dual beam microscope A FIB-FEGSEM Dual-beam microscope is now available at IMDEA Materials Institute. The system (Helios NanoLab 600i, FEI) is fully equipped with STEM

PilotManu is an European project funded by the 7th Framework Programme of the European Union. PilotManu will upscale of the current mechanical alloying technological facility into a powder manufacturing pilot line by further developing existing IPR-covered results owned by the consortium related to

The general objective of this project istwo fold: i) designing and developing of novel multifunctional high reactivity curing agents constituted of controllable functional cross-linking groups on the wall of beta-cyclodextrin structures (easily recyclable after end of lifetime) and ii) studying

Position: Research Associate PhD: Northwestern Polytechnical University, China Research: Phase field simulation of high-temperature alloys Contact: bin.tang(AT)imdea.org

Position: Research Associate PhD: University of Science and Technology, China Research: Multifunctional fire retardant polymeric materials Contact: xin.wang(AT)imdea.org

The general objective of this project is to study the mechanical behavior of metal/ceramic multilayers at the nanoscale. See NANOLAM project description

Javier LLorca, director of IMDEA Materials Institute and professor of Materials Science at the Polytechnic University of Madrid, has been elected to the Academia Europaea in the Physics and Engineering section. The election took place during the Academy Council held in Wroclaw on September, 16th.

Position: Research Associate PhD: Illinois Institute of Technology, EEUU Research: Micromechanics of superalloys Contact: bin.gan(AT)imdea.org

As a part of the science week 2013, Dr. Ignacio Martín-Bragado was interviewed in a nationally syndicated radio program (España de vuelta y vuelta). He explained to the general public the aim and benefits of his group's research activities in the field of atomistic materials

Research Associate - Charaterization of advanced materials

Position: Research Associate PhD: University of Zaragoza, Spain Research: Nano-architectures and materials design Contact: manuela.cano(AT)imdea.org

Position: Research Asistant Research: Development and optimization of Co-base superalloys for high temperature applications Contact: marta.carton(AT)imdea.org

Due to the global tendency to reduce the fuel consumption and CO2 emissions, Magnesium alloys, as very light material, are being very attractive for the transportation industry. Researches of IMDEA Materials Institute in collaboration with prestigious European research centers, have proposed a

Position: Research Asistant Research: Impact in composite materials Contact: miguel.herraez(AT)imdea.org

MICROMECH is an European project funded by the Clean Sky Joint Technology Initiative (JTI-Clean Sky) within the 7th Framework Programme of the European Union. This ambitious two years research project aims at developing a material model to simulate the mechanical behaviour of polycrystalline

The general objective of this project is the development of micromechanical characterization techniques at high temperature for the study of strong nanoscale multilayered materials. See HOTNANOMECH project description

The goal of this research collaboration is to identify and select new material concepts for possible use and incorporation into the future rear fuselages which operate at high temperature. See Pre-HITMAAS project description

Position: Research Associate PhD: Mondragon University, Spain Research: Multiscale plasticity Contact: aitor.cruzado(AT)imdea.org

Prof. José Manuel Torralba (Deputy Director of IMDEA Materials Institute) received the European Power Metallurgy Association (EMPA) Distinguished Service Award 2013 during the Euro PM2013 conference held past September in Goteborg (Sweden). The EPMA Distinguished Service Awards are presented

Position: Research Assistant Research: Micromechanics of intermetallic materials Contact: alberto.palomares(AT)imdea.org

Position: Research Assistant Research: Fire Retardant Polymeric Materials Contact: yetang.pang(AT)imdea.org

Position: Research Assistant Research: Nanoscale metal-ceramic multilayers Contact: yang.lingwei(AT)imdea.org

Position: Research Assistant Research: DFT/MD calculation of phase change materials Contact: wenzhou.chen(AT)imdea.org