Search Results for:  – Page 14

New nanostructured material for capacitive deionization

Researchers from our institute have developed in collaboration with IMDEA Energy a new current collector-free  capacitive deionization architecture based on electrodes consisting of a porous metal oxide network interpenetrated into porous fibres of carbon nanotube. The full device has a large salt

OptiQPAP participation at THERMEC 2018

The OptiQPAP consortium members have participated at the THERMEC 2018 Conference, which was held on July 8-13 in Paris. THERMEC Conference is the main international event in the area of thermo-mechanical processing of steels. The recent outcomes of the OptiQPAP project were presented in oral talks

First Year Assessment of Mario Rueda entitle “Nanoindentation impact testing methodologies for the high strain rate characterization of materials at the microscale” – In the Seminar Room at 09:30 am

Abstract: In view of the future application of polymer matrix composites for structural components subjected to impact loads, there is a need for development of experimentally calibrated constitutive models for polymers that include their inherent viscoelastic and viscoplastic behavior. These

Seminar of Dr. Lukas Helfen, from Karlsruhe Institute of Technology, entitle “Synchrotron Laminography: A Technique for In situ Observation of Damage and its Evolution Inside Engineering Materials ” – At 1:00 pm in the Seminar Room

Synchrotron Laminography: A Technique for In situObservation of Damage and its Evolution Inside Engineering Materials Lukas Helfen,1,2Mark N. Mavrogordato,3Thilo F. Morgeneyer,4T. Baumbach1 1 Institute for Photon Science and Synchrotron Radiation, Karlsruhe Institute of Technology, PO Box 3640,

Seminar of Dr. Mariana Hamer, from the University of Buenos Aires (UBA), entitle “Porphyrin-based nanomaterials: design, synthesis and applications” – At 11:30 am in the Seminar Room

Porphyrin-based nanomaterials: design, synthesis and applications  Abstract  The development of new nanomaterials and nanotechnology currently have a huge impact on modern science. Within this trend, a field that has taken relevance is the construction of nanometric supramolecular systems through

PhD Defense – Miguel Herraez “Computational Micromechanics Models for Damage and Fracture of Fiber-Reinforced Polymers”, under the supervision of Prof. Carlos González and Dr. Cláudio Lopes.

The PhD Defense will take place,  at 12 noon, on next Friday (13th, July) in the seminar room of the Department of Materials Science at the School of Civil Engineering of UPM (ETSI Caminos, Ciudad Universitaria). The dissertation is entitled "Computational Micromechanics Models for Damage and

First Year Assessment of Verónica Fernández – Luna, entitle “Towards the understanding of FP-coating stability in Bio-LEDs” – In the Seminar Room at 12:00 pm

ABSTRACT Solid-state lighting (SSL) is one of the biggest achievements of the 20th century. It has completely changed our modern life with respect to general illumination (light-emitting diodes), flat devices and displays (organic light-emitting diodes), and small labelling systems (light-emitting

Prof. Javier Llorca awarded by SOCIEMAT

Prof. Javier Llorca, Scientific Director of IMDEA Materials Institute, has received the award to the best scientific career by SOCIEMAT Javier Llorca receiving the SOCIEMAT award to the best scientific career during the CNMAT 2018 conference

Seminar of Dr. Vilas G. Pol, from Purdue University, entitle “Engineered Electrodes for Efficient Energy Storage and Battery Safety” – At 12:00 pm in the Seminar Room

Abstract ViPER (Vilas Pol’s Energy Research) laboratory at Purdue University focuses their research activities on the development of high capacity electrode materials, their engineering for longer cycle life and improved safety. Considering the advantages and limitations of known synthesis

The 4th review meeting

The 4th OptiQPAP progress meeting was hosted by the University of Gent (Gent, Belgium) on 15th of June, 2018. Project partners presented and discussed their research activities in frame of the OptiQPAP project within last 6 months. The future research plans and dissemination activities were updated.

Home

Design, processing, characterisation and simulation of advanced materialsCompetitiveness through advanced knowledgeNovel materials for future applicationsYour partner to develop innovative, high value materialsDownload Previous slide Next

Clean Sky 2 visit

Past tuesday 5th of June, representatives of the Clean Sky 2 visit our Institute as part of the Engine Integrated Technology Demonstrator (ITD) annual meeting, organized by ITP Aero. Our Instutute is currently participating in 3 Clean Sky 2 projects: REDISH, (CROR Engine Debris Impact SHielding.

Seminar of Carlos M. Atienza, from the Biomechanics Institute of Valencia, entitle “3D printing technologies, new possibilities for customized products and services for TOC” – At 12:00 pm in the Seminar Room

3D printing technologies, new possibilities for customized products and services for TOC There will be first an introduction to the activities of the IBV (Valencia Biomechanics Institute), to then explain the biomechanical bases of additive manufacturing through EBV that led the IBV to work on this

Summer School & Industry Day: Additive Manufacturing

On July 23rd and 24th IMDEA Materials Institute organizes a Summer School on Additive Manufacturing and an Industry Day where prominent companies (Siemens, ITP, Renishaw, HP, LPW Technologies, Mizar Additive) will discuss the progress of the field as well as the challenges ahead. This event is

First Year Assessment of André Rittner Pires Correa entitle “A numerical approach on thermoforming simulation of UD prepregs” – In the Seminar Room at 12:00 pm

Abstract Composite materials are a serious competitor for lightweight metals used in the aerospace and automotive industry. Fast production methods like thermo-folding, diaphragm forming or stamping can produce large numbers of CFRP components in a cost efficient way. The weight saving benefits of

Mid-term report

The OptiQPAP project has successfully undergone mid-term review by the Research Fund for Coal Steel. The mid-term report of the OptiQPAP project was approved by the Committee after the evaluation that took place on April 27 at the CSM headquarters (Rome).

MINIMAL project

MINIMAL is a research endeavour which will contribute significantly towards improving analysis/predictive tools for dislocation-interface interactions in metallic nanolaminates, which have attracted application as mechanical parts in Micro Electro Mechanical Systems (MEMS). It is funded by the

Seminar of Dr. Indrat Aria, from Cranfield University, entitle “Synergistic CVD graphene and ALD alumina for permeation barrier applications” – At 1:00 pm in the Seminar Room

Abstract Permeation barrier films are critical to a wide range of applications ranging from food and medical packaging to organic electronics and photovoltaics. For some of these applications, not only low permeation values are required but also flexible and transparent. Here, I will present

Seminar of Dr. Eric Jägle, from the Max Planck Institute of Metals Research in Düsseldorf (Germany), entitle “Alloys for Additive Manufacturing, Alloys by Additive Manufacturing” – At 11:00 am in the Seminar Room

Abstract As Additive Manufacturing technologies are being adopted in more and more industries, the focus of research and development is shifting to the materials in use. On the one hand, limited processability of high-performance materials restrict the robustness of the process in some cases, while

Annual report 2017 is out

The outcome of the research activities performed during year 2017 is summarized in this document. Information about the centre Principal Investigators, current research projects, research infrastructures as well as dissemination activities can be found in this annual report, together with scientific

Jon Molina awarded best young researcher by UC3M

Dr. Jon Molina has been awarded as one of the best young researchers by Carlos III University of Madrid (UC3M). The full information of this award can be found in this link (in Spanish only)

Large surface area lends superpowers to ultra-porous materials

Some materials are special not for what they contain, but for what they don’t contain. Such is the case with metal-organic frameworks (MOFs) – ultra-porous structures that are being developed for a variety of future applications from fire-proofing to drug-delivery. Read the whole article in HORIZON

Seminar of Prof. Marisol – Martín González, from the Instituto de Micro y Nanotecnología, entitle “Nanoengineering thermoelectrics to improve their efficiency: some examples” – At 12:00 am in the Seminar Room

Short summary of her group Functional Nanoscale Devices for Energy Recovery Group (FINDER) (Instituto de Micro y Nanotecnología) Their research is focused on the optimization of thermoelectric devices via nanostructuration. A thermoelectric device is  able to transform temperature differences into

Optoelectronics special issue

A special issue organized by our colleague Rubén Costa on new materials and approaches for optoelectronics is free to read in ChemPlusChem through May! Check it out under this link: https://onlinelibrary.wiley.com/toc/21926506/83/4

Seminar of Dr. Thomas Bieler, from the department of Physical Metallurgy, Grain Boundaries, Crystal Plasticity from IMDEA Materials, entitle “The challenge of finding critical resolved shear stress values for meso-scale modeling of  titanium alloys” – At 12:00 am in the Seminar Room

Short bio: Professor Thomas R. Bieler earned a B.A. in Applied Mechanics at University of California at San Diego in 1978 followed by a M.S. In Ceramic Engineering at University of Washington (Seattle) in 1980.  He worked for five years at Sandia National Laboratory in Livermore on high rate

CIMNE – IMDEA Materials Workshop

On April 13, a bilateral technical meeting was held between the International Centre for Numerical Methods in Engineering (CIMNE) and the IMDEA Materials Institute. Twelve researchers from both institutions attended the workshop, which took place at IMDEA Materials’ facilities in Tecnogetafe, with

Seminar of Prof. Efstathios I. Melts, from the Department of Materials Science and Engineering of the University of Texas at Arlington, entitle “The Quest for New Materials: Interface-engineered Materials” – At 12:00 am in the Seminar Room

ABSTRACT Atomic interface structures provide a unique opportunity to design new materials that can provide promising solutions to future technological demands. This talk presents an overview of two diverse areas of activity at the Surface and Nano Engineering Laboratory at the University of Texas,

Seminar of Prof. Jiacheng Wang, from the Shanghai Institute of Ceramics, Chinese Academy of Sciences (CAS), entitle “Emerging Materials for Electrocatalysis” – At 11:30 am in the Seminar Room

Abstract Platinum-based materials are highly active as the electrocatalysts both in hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) in fuel cells, but high cost limits its wide applications. In this talk, the reporter summarized the recent research progress of designing and

Is ultra-fast processing the next revolution for steel production?

Researchers of our Institute collaborate with an international consortia to develop an ultra-fast processing process for steels. This approach is energetically more efficient than current methods. You can learn more about this technique in this article (Spanish only)

3rd review meeting

The 3rd OptiQPAP progress meeting was held on 24th of January, 2018, at the CTM headquarters (Manresa, Spain). The meeting was organized by Toni Lara. Project partners presented and discussed their research activities in frame of the OptiQPAP project within last 6 months, as well as

ALFORAMA 1st consortium meeting in Ordizia

The First ALFORAMA Technical Committee Meeting took place on the 18th of January 2018 and was hosted by the Coordinator of the Consortium IK4-LORTEK in Ordizia, Spain The ALFORAMA partners reviewed the progress made across the different work packages addressing topics such as definition of

2nd IMDEA Materials Innovation Awards

On 28th of November took place the 2nd IMDEA Materials Innovation Award.  The Director of the Institute, Prof. Ignacio Romero, gave the award to Miguel Angel Valdes on his winner project entitle ““Ultra-rapid processing of advanced high strength steels”. The 2nd edition started with the last year´s

First Year Assessment of Jing Zhang entitle “Metal organic frameworks (MOFs) derived hierarchically nanomaterials as multifunctional fire retardant for polymer nanocomposites” – In the Seminar Room at 12:00 pm

Abstract Fire hazards including the generation of heat, smoke and toxic vapor, cost a great number of lives and damage properties. Compared with natural polymers, the high flammability and the widespread use of synthetic polymers lead to serious safety and environmental problems. Therefore, methods

First Year Assessment of Andrea Fernández entitle “Recycling of composites by recovering carbon fibres of cured prepregs, and their re-use in hybrid laminates” – In the Seminar Room at 12:00 pm

Abstract: Recycling of composites by recovering carbon fibres of cured prepregs, and their re-use in hybrid laminates by Andrea Fernández Gorgojo The applications of composite materials are rapidly growing in several sectors. For example, in the aeronautical sector, composites can account for up

Seminar of Prof. John Allison entitle “The PRISMS Framework: An Integrated Predictive Multi-Scale ICME Capability for the Global Materials Community” – At 1:00 pm in the Seminar Room

The PRISMS Framework: An Integrated Predictive Multi-Scale ICME Capability for the Global Materials Community John Allison University of Michigan, Ann Arbor MI The Center for PRedictive Integrated Structural Materials Science (PRISMS) is a major Materials Genome Initiative effort creating a unique

Research Initiation Fellowships of Juan Manuel Moreno entitle “Optimization of electrolyte conductivities containing flame retardant. A computational experimentally-guided approach based on Genetic Algorithms combined with Machine Learning techniques (GAML)” – At 4:00 pm in the Seminar Room

Abstract Flame retardants are going to be such an important component in future Lithium-based batteries. However, these flame retardants have a major problem: they decrease the conductivity values of electrolytes. During this project we have been trying to use some new optimization techniques

First Year Assessment of Pablo García entitle “The fatigue behavior of advanced high-strength steels processed via quenching and partitioning” – In the Seminar Room at 12:00 pm

ABSTRACT The increasingly demanding environmental and safety goals imposed to the automotive industry have fostered fierce competition to develop new multi-phase steel types that are stronger, tougher, more formable, and fatigue-resistant. Among the various approaches in study, steels processed via

Francisca Martínez-Hergueta receives the award to the best PhD thesis

Francisca Martínez-Hergueta has received the award to the best doctoral thesis in the academic year 2015-2016 from the Technical University of Madrid (UPM). The thesis was entitled "Multiscale analysis of the mechanical behaviour of needle-punched nonwoven fabrics " and was carried out at IMDEA

Presentación de la revolución tecnológica: BioLED

  En esta ocasión, smartLIGHITNG y el Instituto IMDEA Materiales, tiene el placer de invitarle a la presentación en absoluta primicia del BioLED, una tecnología que va acaparando premios y reconocimientos por todo el mundo de distintas organizaciones, como la del prestigioso y solvente,

Seminar of Prof. Javier García Martínez entitle “Design, Fabrication and Commercialization of new catalysts engineered at the nanoscale” – At 10:00 am in the Seminar Room

DESIGN, FABRICATION AND COMMERCIALISATION OF NEW CATALYSTS ENGINEERED AT THE NANOSCALE J. García-Martínez Laboratorio de Nanotecnología Molecular, Dpto. Química Inorgánica, Universidad de Alicante, Ap. 99, E-03690 Alicante, Spain. www.nanomol.es; Rive Technology, Inc., 1 Deer Park Drive, Monmouth

ALFORAMA at Strategic Workshop on Additive Manufacturing

ALFORAMA participated in the European Strategic Approach on Additive Manufacturing that took place on 15th November 2017 in Oeiras, Portugal. The workshop was organised by the European Federation for Welding, Joining and Cutting and AM-motion project. The event

New efficiency record in TiO2 solar cells

Researchers from IMDEA Materials, University of La Rioja and University of Alicante have set a new record in the energy efficiency of TiO2 solar cells (8.75 %). TiO2 is an affordable compound that makes these solar cells less expensive than traditional silicon solar cells. The research at IMDEA

First Year Assessment of Yunfu Ou entitle “Understanding interlaminar toughening mechamisms in structural carbon fiber/epoxy composites interleaved with CNT veils” – In the Seminar Room at 12:00 pm

ABSTRACT: The susceptibility to delamination is one of the main concerns in fiber reinforced polymer composites (FRPs), while carbon nanotubes (CNT) carry the promise of enhancing this poor out-of-plane mechanical performance. This work reviews the progress to date towards methods of

Seminar of Dr. Juan Manuel Ortiz entitle “Microbial Electrochemical Technologies and waste water treatment: concepts and main applications” – At 11:00 am in the Seminar Room

ABSTRACT Microbial Electrochemical Tehnologies (MET) are a recent research field related to environmental biotechnology. The main concept for its development is related to the ability of the microorganisms of producing electricity from organic matter degradation, using an insoluble electron

Seminar of Mauricio Terrones entitle “Low-Dimensional Nano-Carbons: Form Doped Carbon Nanotubes and Doped Graphene to 3-D Hybrids and Biological Applications” – Seminar Room, 1:00 pm

Low-Dimensional Nano-Carbons: Form Doped Carbon Nanotubes and Doped Graphene to 3-D Hybrids and Biological Applications Mauricio Terrones1 E-mail: mut11@psu.edu 1Department of Physics, Department of Chemistry, Department of Materials Science and Engineering and Center for 2-Dimensional & Layered

First Year Assessment of Miguel Angel Valdés entitle “Study of Mechanical Properties on Macro- and Microscopes in AHSS by Ultra-Fast Heating” – In the Seminar Room at 11:00 am

Abstract Ultrafast heating (UFH) has recently attracted significant attention of steel research community due to its advantages over conventional heat treatment of advanced high-strength steel (AHSS) including very short processing time, reduced energy consumption and low carbon footprint. The UFH

Modelling superalloy behaviour to improve aircraft engine design

The MICROMECH project, part of the Sustainable and Green Engines (SAGE) Integrated Technology Demonstrators (ITD) of Clean Sky, has successfully developed a multi-scale computational tool to predict the mechanical behaviour of the Ni-based superalloys used in the hottest parts of aircraft engines.

(CRASHING II) FRONT FUSELAGE CRASHWORTHINESS MODELLING

Funding: AIRBUS DEFENSE & SPACE Region: Spain Project period: 2016 – 2017 Principal Investigator: Dr. Cláudio Sául Lopes (claudiosaul.lopes@imdea.org) The CRASHING II project is the follow up of the Clean Sky CRASHING project and is focused on the modelling and simulation of the

Rubén Costa awarded as European young innovator by the MIT

Rubén Costa, head of the research group on hybrid optoelectronic materials and devices at IMDEA Materials, has been awarded talented young innovator by the MIT Technology Review. Rubén Costa is leveraging his educational background to guide his work developing a lower-cost, more

First Year Assessment of Eva M. Andrés López entitle “Coupled thermomechanical damage model in small strain elastoplasticity: A thermodynamic approach”- Seminar Room at 1:00 pm

Abstract The objective of the present project is the development and numerical implemen- tation of constitutive equations for the coupled thermomechanical damage problem in the speci c context of the in nitesimal strain approximation, within the framework of the thermodynamics of irreversible

Future bulbs will be made of proteins

LED lights are the true heir to Edison’s electric bulb. They are a major breakthrough in lightning, but still require advances related to their manufacture using cheaper sustainable materials. In this interview (in Spanish), Rubén Costa (senior researher at IMDEA Materials) explains his vision of

Quantum Dots, Fluorescent Proteins Vie for Supremacy

Since the mid-50s the full-color display technology began its rise to success. The origins of this technology was the old-fashioned cathode ray tubes, which were displaced from the top about a decade ago by liquid crystal displays (LCDs) using a back-lighting system based on white inorganic

Rubén Costa selected top Spanish talent by the MIT

Rubén Costa, head of the research group on hybrid optoelectronic materials and devices at IMDEA Materials, has been selected as one of the Top Spanish Talents by the MIT Technology Review. He will be competing for a spot among the final list of Innovators Under 35 Europe 2017. Rubén

Carlos González appointed Full Professor at UPM

Prof. Carlos González, head of the research program on the "Next Generation of Composite Materials" at IMDEA Materials Institute, has been appointed Full Professor at the Department of Materials Science of Polytechnic University Madrid (UPM), in which he was an Associate Professor. Our

Winners of the 2016 Imaging Contest

Last Friday, June 30th, the Director and Deputy Director of the Institute gave the awards to the winners of the 2016 edition of the IMDEA Materials Imaging Contest. From left to right: Jose Luis Jimenez, Miguel Ángel Valdés, Daniel del Pozo and Miguel Monclús. The winners of this year in the

ALFORAMA Kick-off Meeting

The ALFORAMA Kick of Meeting took place on the 4rd of July 2017 in Naples (Italy). The event was host by LEONARDO S.p.A. (Topic Manager Company). Leonardo is a founding member of the Clean Sky JTI (Joint Technology Initiative) started in 2008 to develop breakthrough technologies

Poster Awarded at the conference CALPHAD 2017

Jingya Wang, Research Assistant at IMDEA Materials Institute, received the award to the best poster entitled “Computational Study of Atomic Mobility in HCP Mg-Al-Zn Ternary Alloys and Anisotropic diffusion in hcp Mg-Al alloys” at the International CALPHAD Conference. This Conference was first held

Seminar of Dr. Markus Stricker – “Glissile junctions: Insights from discrete dislocation dynamics and development of a continuum model” -Seminar Room, 12:00 am

Glissile junctions: Insights from discrete dislocation dynamics and development of a continuum model Markus Stricker Karlsruhe Institute of Technology The understanding of the mechanisms governing plastic deformation of metals is the understanding of dislocation motion from single dislocations to

2nd review meeting

TU Delft (Delft, The Netherlands) has hosted the 2nd OptiQPAP progress meeting on 26th of June, 2017, at the headquarters (Manresa, Spain). The meeting was organized by Dr. Carola Celada. Project partners presented and discussed their research activities in frame of the OptiQPAP project within last

MICROMECH II project

The MICROMECH II project is the follow up of the Clean Sky MICROMECH project and is focused on the development of more elaborated micromechanical models for Inconel 718 alloy (casted and forged). Check the whole description of the project.

Celebrating 10 years of the ERC

Back in 2007, the European Commission established the European Research Council (ERC) with the mission to encourage excellent frontier research in Europe through competitive funding, supporting top researchers across all fields and of any nationality. Since then, the ERC has had a considerable

(AROOA) A STUDY AND OPTIMIZATION OF OUT-OF-AUTOCLAVE PROCESSING OF COMPOSITES

Funding: Hexcel Composites Limited​Region: IndustrialProject period: 2014 – 2017Principal Investigator: Dr. Federico Sket (federico.sket@imdea.org) and Dr. Carlos González (carlosdaniel.gonzalez@imdea.org)AROOA project aims to study and optimize a new family of prepregs designed for out-of-autoclave

Prof. Ignacio Romero, appointed new Director

On April 28th, Javier LLorca stepped down as Director of IMDEA Materials Institute, after 10 years in this position. The newly appointed Director is Ignacio Romero, formerly Deputy Director of the Institute, and head of the Computational Solid Mechanics Group. Dr. Romero is Full Professor at the

Annual report 2016 is out

The outcome of the research activities performed during year 2016 is summarized in this document. The personnel, current research projects, research infrastructures as well as disseminations activities (publications, conferences and seminars, patents, theses, etc.) can be found in this annual report

Seminar of Prof. José A. Rodríguez-Martínez – “A general overview on multiple necking and fragmentation problems in ductile solids subjected to high strain rates” – April 19th 2017, Seminar Room at 12:30 pm

Seminar: "A general overview on multiple necking and fragmentation problems in ductile solids subjected to high strain rates" Understanding the fragmentation of ductile solids and structures subjected to high velocity impacts or blast loadings has importance in aerospace industry, military

CRASHING II project

The CRASHING II project is the follow up of the Clean Sky CRASHING project and is focused on the modelling and simulation of the crashworthiness of and aircraft front fuselage using numerical composite material models developed in the initial project. The cabin model will be simulated in different

Seminar of Prof. Raúl Sánchez-Martín – “Introduction to Machine Learning with Python: Image Processing and Recognition” – April 4th 2017, Seminar Room at 5:00 pm

ABSTRACT: Machine learning, an important part of artificial intelligence, has made a huge impact on many different areas (baking, logistic, telecommunications, etc.) during the last years. Following this trend, there are clear indications that this data-driven technique will play a fundamental role

Juan José Vilatela joins the Editorial Board of Scientific Reports

Dr. Juan José Vilatela, Senior Researcher at IMDEA Materials, joins the Editorial Board of Scientific Reports. Scientific Reports is an online, open access journal from the publishers of Nature. It publishes scientifically valid primary research from all areas of the natural and clinical sciences.

A yarn like sensor for composites

J. Carlos Fernández-Toribio There is a clear evidence that composites are an increasing field of interest. Thus, the demand for composites end products has reached 22.2$ billion in 2015 . This is due to their low weight and high mechanical resistance. Therefore, lighter structural parts can be

Seminar Prof. Jorge Alcalá – “Multi-scale mechanistic interpretations to indentation experiments across the material length scales: from continuum to atomistic” – Seminar Room (12:00)

Abstract We provide a fundamental contact mechanics background to the interpretation of spherical indentation experiments performed in polycrystalline aggregates, single crystalline units, thin films, and minute material scales comprising an atomistic ensemble. A central issue under examination is

Metals Winter Meeting 2017 (Seminar Room – 9:45 am)

METALS WINTER MEETING 2017 PROGRAM 9:45 Arrival and welcome Session I Chairman: Carmen Cepeda 10:00 Marcos Jiménez “Fatigue behaviour of INCONEL 718 under cyclic conditions” 10:15 Deng Xiangxing “Development of innovative materials for the cutting sector" 10:30 Marta

(ECOPVC) ECO-FRIENDLY FIRE RETARDANT PVC NANOCOMPOSITES

Funding: China Scholarship CouncilRegion: InternationalProject period: 2013 – 2017Principal Investigator: Dr. De-Yi Wang (deyiwang@imdea.org)The study of fire retardancy in PVC is a very important topic nowadays due to its huge industrial application. ECOPVC project aims to develop a series

Training course DIMMAT: “Economic-business basic concepts”

The next training course “Economic bussines basic concepts” will be held at the Seminar Room, on March 2nd, 2017. The programme offered is suitable for pre-doctoral and post-doctoral researchers. · Place: IMDEA Materials Institute (Seminar room) Date: March 2nd, 2017 Time: 10:00 – 12:00 Attached

SORCERER project starts

Clean Sky Joint Undertaking 2 This project will develop revolutionary lightweight electrical energy storing composite materials for future electric and hybridelectric aircraft. Building on previous research in novel lightweight supercapacitor composites, structural battery and structural energy

First Year Assessment of José Antonio Santiago entittle “Enhanced Diamond-Like Carbon coatings and tribomechanical properties via innovative sputtering processes”

Abstract:  Diamond-like Carbon (DLC) coatings have been recognized as one of the most valuable engineering materials for various industrial applications including manufacturing, transportation, biomedical and microelectronics. Among its many properties, DLC stands out for good frictional behaviour

1st review meeting

The 1st OptiQPAP progress meeting was held on 24th of January at the CSM headquarters (Rome, Italy). The meeting was organized by Dr. Ali Smith. Project partners presented and discussed their research activities in frame of the OptiQPAP project within first 6 months. The research plans for the next

Recruitment process is closed

The recruitment process to cover 2 research assistants positions (Early Stage Researchers) within the DYNACOMP project is now closed. The selected candidates are Maria Azzurra (Master’s degree in Materials Engineering by the University of Salento in Italy) and Mario Rueda (Master of

ACERCOM project starts

Source(s): IMDEA Materials, Arcelor Mittal Within the framework of the coordinated project ACERCOM, coordinated by Arcelor Mittal, IMDEA Materials Institute will mainly carry out the modeling, fabrication and characterization of fiber metal laminates for application in marine wind energy. See the

Summer school on composite materials

Composite materials are nowadays extensively used in applications where outstanding mechanical properties are necessary in combination with weight savings.Their increased use has presented new challenges to engineers, largely due to the highly complex failure mechanisms of composite materials but

Mónica Echeverry-Rendón

Research Areas of Interest Projects Grants and Awards Publications at IMDEA Materials The Biometals, Coatings, and Devices Group – BCD Group is dedicated to the research, development, and evaluation of materials within the field of biomedical engineering, with a particular emphasis on

Symposium on New steels for applications under extreme conditions

Metallurgical and Materials Transactions A A. García-Junceda, M.J. Santofimia. Symposium on New steels for applications under extreme conditions. Metallurgical and Materials Transactions A 47, 5271–5271, 2016. DOI: 10.1007/s11661-016-3766-2

ITN 2016 – Coordinators Info Day

IMDEA Materials, as coordinator of the DYNACOMP network, attended an information day for ITN actions organized by the Research Executive Agency (REA) past 12/12/2012 in Brussels (Belgium). During the event, the REA (funding agency of the DYNACOMP project) provided detailed

NANOFIRE project

NANOFIRE project deals with the development of new generation nanomaterials via host-guest interaction as multifunctional fire retardants to polymers.  The aim is to not only improve the flame retardancy and mechanical properties of conventional polymers, also impart the function to the

Yunfu Ou

Predoctoral Researcher: Multi-functional Graphene Thermoplastic Composite Materials. Contact: yunfu.ou@imdea.org

Rudi Maça

Predoctoral Researcher: Electrochemical energy storage. Contact: rudi.maca@imdea.org

Designing advanced materials in a faster and more effective way

DIMMAT Project has published the new "Designing advanced materials in a faster and more effective way" (Diseñar materiales avanzados de manera más rápida y efectiva) in the industrial magazine "Metales y Metalurgia" This project is funded by the Comunity of

Follow Us

Linkedin-in Icon-twitter-x Youtube Instagram Facebook-f Flickr Spotify

Contact us

Phone: (+34) 91 549 34 22
Email: contact.materials@imdea.org

Location

C/ Eric Kandel, 2
Tecnogetafe
28906, Getafe, Madrid (Spain)

HOW TO ARRIVE

© All rights reserved

Privacy policy | Accesibility | Disclaimer | Ethics Channel

© Fractales