Abstract Magnesium is an attractive metal for various technological applications due to its low density (23% of steel and 66% of aluminum) and availability. Applications of magnesium in the automotive and aerospace industries aim for weight reduction and enhanced fuel efficiency. However,

The 3rd edition of the IMDEA Materials´ Innovation Awards was held the 28th of November in the Auditorium of its facilities. Each of the 5 candidatures had the chance to give a 10 minutes presentation to explain/defend, in front of the evaluation panel and rest of  IMDEA´s employees, why their

Our Institute has started a new research line on novel bioresorbable materials for implant applications (see related news in Spanish). This work will be initially supported by the BIOIMPLANT project (funded by the European Union under the Marie Skłodowska-Curie Actions Innovative Training Networks).

Abstract: This study aims to increase the understanding of the tensile failure of unidirectional hybrid and non-hybrid composite when subjected to tensile loadings. To achieve this goal several models with increasing complexity have been developed and implemented and the effects of tensile loading

The PhD Defense will take place,  at 11:30 am, on next Thursday (22nd of November) in ETSI Industriales in aula D.  The dissertation is entitled “Numerical Methods for the simulation of high velocity impact" Here is the link of the school address in google

 ABSTRACT  Carbon nanotubes (CNTs) have been a focus of nanomaterial research over the past two decades, due to their wide range of potential applications. In recent years, studies have shown a high degree of molecular control of CNTs in terms of number of layer, morphology and alignment, as well

Abstract Additive manufacturing (AM) is a layer by layer process that has the potential to disrupt traditional fabrication methods. It allows fast manufacturing of three dimensional pieces from metallic powders, with great exibility of design, potential for weight reduction, fast production speed

Rubén Costa explains his research line related to biological lightning in the national tv news (in Spanish only)

Abstract: Ni-based superalloys play an extremely important role in the aerospace industry due to their outstanding strength and chemical stability at high temperature. Most demanded components employed in jet engines are manufactured with these novel materials. Several statistical studies confirm

ABSTRACT The previous design of engines used for commercial aircrafts fan and turbine were driven with same shaft; new geared engines decouple fan and the low pressure turbine increasing angular velocity, and also centrifugal forces, so a change from conventional superalloy blades to lighter ones

Abstract Additive manufacturing (AM) is a layer by layer process that has the potential to disrupt traditional fabrication methods. It allows fast manufacturing of three dimensional pieces from metallic powders, with great exibility of design, potential for weight reduction, fast production speed

The PhD Defense will take place,  at 12 noon, on next Friday (26th of October) in the “sala verde”, on the first floor, in the Escuela de Ingenieros de Caminos, UPM (ETSI Caminos, Ciudad Universitaria)  The dissertation is entitled “Energy Harvesting Materials Based on Carbon Nanotube Fibre for

 Abstract:  It is presented a rigorous framework developed for formulation of constitutive models. Based on representation theory for tensor functions and scale-bridging theorems, this framework enables the development of constitutive models that account for the influence of crystallographic

We are hosting the 55th edition of the Annual Technical Meeting of the Society of Engineering Science (SES). The SES Technical Meeting is held annually to provide an interdisciplinary forum for the exchange of ideas and information among the various disciplines of engineering and the physical and

Abstract Over the past few years, graphitic carbon nitride (g-CN) has attracted widespread attention due to its outstanding electronic properties, which have been exploited in various applications, including in photo- and electro-catalysis, heterogeneous catalysis, CO2 reduction, water splitting,

Discrete slip crystal plasticity modeling of deformation in nanolayered materials Irene J. Beyerlein1, Tianju Chen2, Rui Yuan2, Caizhi Zhou2,3 1 Mechanical Engineering Department, Materials Department, University of California at Santa Barbara, Santa Barbara 93106, USA 2 Department of Materials

Abstract Herein, highly ordered mesoporous pseudocapacitive electrodes for superior Li-ion storage are discussed. Hierarchical 1-D Co3O4nanorods of size ~20 nm with interfaces between the crystallites were synthesized using hydrothermal method followed by calcination. This 1D nanorods exhibited

Abstract Additive manufacturing (AM) is a layer by layer process that has the potential to disrupt traditional fabrication methods. It allows fast manufacturing of three dimensional pieces from metallic powders, with great exibility of design, potential for weight reduction, fast production speed

Researchers belonging to all IMDEA institutes solved a new crime in the activity "IMDEA-CSI" as part of the European Researchers' Night Madrid 2018. More information about the event in this podcast (radio show "Por tres razones", RTVE)

Abstract: Solidification is one of the major steps in producing parts from the molten material in casting, welding or additive manufacturing. On top of process optimization and simulation to obtain good mould filling and minimized defects, the quality of the cast parts depends strongly on the

Abstract In this study, dimension control and nanostructure design were applied in developing electrode materials for superior Na-ion storage. Firstly, hierarchical Co3O4nanorods with increased number of interfaces between individual nanocrystallites were prepared for enhancing pseudocapacitance

ABSTRACT: The main objective of this work is to create a physical platform for material characterization and parameter identification at macroscale as a function of applied strain rate, understanding how the strain rate affects the damage and mechanical response of three different composite material

The PhD Defense will take place,  at 12 noon, on next Friday (7th of September) in the “sala verde”, on the first floor, in the Escuela de Ingenieros de Caminos, UPM (ETSI Caminos, Ciudad Universitaria)  The dissertation is entitled “Development of Multifunctional Flexible and Structural

Abstract: Advanced composite materials are now used in a wide range of industries, including aerospace, marine, construction, transport and recreational sport. The ever-increasing pressure on producing quality parts effectively and efficiently has led to many innovations over the years in

Research Assistant Elisa Fresta has been awarded a Prize for one of the best Master Thesis (year 2015/2016) from the University of Turin. The thesis was developed at both the University of Turin and the University of Erlangen-Nuremberg under the supervision of Prof. Claudia Barolo and Dr. Rubén

Researchers from our institute have developed in collaboration with IMDEA Energy a new current collector-free  capacitive deionization architecture based on electrodes consisting of a porous metal oxide network interpenetrated into porous fibres of carbon nanotube. The full device has a large salt

Abstract: In view of the future application of polymer matrix composites for structural components subjected to impact loads, there is a need for development of experimentally calibrated constitutive models for polymers that include their inherent viscoelastic and viscoplastic behavior. These

Time, Place, PhD thesis Title The Ph.D work is entitled as “Ignition Delaying and Smoke Suppression Study of Fire-Retardant Polymer Composites” under the supervision of Dr. De-Yi Wang. This event will be taking place at 12:00am (16th, July) in “Seminar Room” of ETS de Ingenieros de Caminos, Canales

Synchrotron Laminography: A Technique for In situObservation of Damage and its Evolution Inside Engineering Materials Lukas Helfen,1,2Mark N. Mavrogordato,3Thilo F. Morgeneyer,4T. Baumbach1 1 Institute for Photon Science and Synchrotron Radiation, Karlsruhe Institute of Technology, PO Box 3640,

Porphyrin-based nanomaterials: design, synthesis and applications  Abstract  The development of new nanomaterials and nanotechnology currently have a huge impact on modern science. Within this trend, a field that has taken relevance is the construction of nanometric supramolecular systems through

The PhD Defense will take place,  at 12 noon, on next Friday (13th, July) in the seminar room of the Department of Materials Science at the School of Civil Engineering of UPM (ETSI Caminos, Ciudad Universitaria). The dissertation is entitled "Computational Micromechanics Models for Damage and

ABSTRACT Solid-state lighting (SSL) is one of the biggest achievements of the 20th century. It has completely changed our modern life with respect to general illumination (light-emitting diodes), flat devices and displays (organic light-emitting diodes), and small labelling systems (light-emitting